NIS: Initializing the master server

In trying to setup a NIS master server, I took the following steps:
1. cp /etc/nsswitch.nis /etc/nsswitch.conf
2. domainname kingfisher.com
3. domainname > /etc/defaultdomain
4. /usr/sbin/ypinit -m
then I got the following error message:
"Can't get domain name from the local host ...check your path"
Please what does this message mean and how can I resolve it?

Originally Posted by Craig Johnson
If you are using BM 3.9, you do things differently than with 3.7 and
earlier - you don't use VPNCFG for 3.8 and 3.9 anymore, you use
iManager.
Getting VPN configured isn't necessarily the simplest BM task to figure
out. Check the Novell documentation site closely, and be sure you are
in the 3.9 (or 3.8) documentation. If you want an easier step-by-step
explanation, check out my BMgr 3.x book at the URL below.
Craig Johnson
Novell Support Connection SysOp
*** For a current patch list, tips, handy files and books on
BorderManager, go to Craig Johnson Consulting - BorderManager, NetWare, and More ***
thanks a lot for your reply. I did use IManager, but for whatever reason I am not able to see BM when I login in to that server through IManager.

Similar Messages

3.8.0 Master Server file corruption

We had two of three drives fail on the master server and it resulted in file corruption and is unrecoverable. We have a slave server with users who haven't been able to login because they rely on the master to redirect the client. I've had to rebuild a replacement master server from scratch using the same name, IP, settings, etc. Naturally, the replacement master is unaware of the old slave. Can I re-run simias config on the slave to make the replacement master aware without impact to the data & accounts already on the slave?
Thanks,
fdiaz

No, you cannot do this.
>>> vodobaas<[email protected]> 5/7/2012 8:16 PM >>>
We had two of three drives fail on the master server and it resulted in
file corruption and is unrecoverable. We have a slave server with users
who haven't been able to login because they rely on the master to
redirect the client. I've had to rebuild a replacement master server
from scratch using the same name, IP, settings, etc. Naturally, the
replacement master is unaware of the old slave. Can I re-run simias
config on the slave to make the replacement master aware without impact
to the data & accounts already on the slave?
Thanks,
fdiaz
Fdiaz
vodobaas's Profile: http://forums.novell.com/member.php?userid=9033
View this thread: http://forums.novell.com/showthread.php?t=455560

Replication overwrites the AAA servers table in the secondary server

Hi,
I've configured two ACS servers with replication but i noticed that when the replication takes place it overwrites the AAA servers table configured in the network configuration of the secondary server and that makes the next replication to fail because the two servers have the same configuration of AAA servers, if i uncheck the "Network Configuration Device tables" and the "Network Access Profiles" from the "Database Replication Setup" wich includes the AAA servers table I also missed the replication of the new network devices that are added in the master server.
Do you know how can i exclude only the AAA servers table from the replication??
Other thing is that I configured the Outbound replication as "Automatically triggered cascade", I'm not sure if this means that at the exactly moment that there is a change on the primary server it will replicate it to the secondary???? because if that is the case it is not doing it.
Thanks in advance for your help

Hi,
I understand, thanks alot for making that clear!.
I now have another situation and i was wondering if you can help me, i made some changes in the AAA servers trying to solve this situation but i wasn't able to, so i leave again the servers in the same way that they were configured by the time the replication was working but now it is not, in the master server i get this message:
ERROR ACS 'LACSLVBCDVAS007' has denied replication request
and in the second server i get this:
ERROR Inbound database replication from ACS 'lacslvbcpvas011' denied - shared secret mismatch
I've checked the same key configured for both and are the same, i've deleted the AAA servers and the configure them again, restart the services but the problem remains, dou you have any idea what this could be??
Thanks in advance for your help.
Best Regards,

NIS master server setup error

I am configuring a new NIS master server but when i wanted to start the setup process by the command ypinit -m, i get the following error messages bellow;
make: Warning: Target `all' not remade because of errors+
Current working directory /var/yp*
*** Error code 1*
The following command caused the error:*
+if [ ! 1 ]; then make -k all; \+*
else make -k all NOPUSH=1;fi*
make: Fatal error: Command failed for target `k'*
Error running Makefile.*
universe has been set up as a yp master server with errors. Please remember
to figure out what went wrong, and fix it.
If there are running slave yp servers, run yppush now for any data bases
which have been changed. If there are no running slaves, run ypinit on
those hosts which are to be slave servers.
please help to check what can be the problem.
Regards,
Ibroxy

Hi Sowmya,
What i get from your post is, You are trying to install
1. Repository Server with External Database System.
2. Business Architect
and all this three ( Repository server, Database System and Business Architect) are on the same machine.
I would suggest the following steps.
1. Install your external Database system (Oracle 10g..) without creating any Database Instance.
2. Install Repository server Select the third option in datbase which say create a new instance and configure it.
When you choose the third option Repository server creates a Database instance and configures it for itself.
3. Install Business Architect with standard database.
you will get LOCAL server, click on Add server and add our repository server (please dont forget to Start the Repository server before connecting :) ).
You can do this all on same machine or all on different machines but there may be some firewall issue depending upon your netwrok configuration. so i suggest try n test all this on as same machine first.
I will be happy to answer any more queries on this topic...
Regards
Gaurav Sharma :)

NIS client lookup for NIS master server problem

Dear All,
I have solaris OS 10 installed on NIS master and slave server and also client. Sometimes, my client cannot work properly. Although it is configured to lookup for NIS master as the server, it lookup for slave server instead occasionally. It will be alright after reboot. Please advise.
Any help is much appreciated.
best regards
vlsi

I'm not sure why you would want the client to not bind to the slave and only to the master. That's the whole point of having slave servers.
Just rerun ypinit -c on the client if you want to change which server the client binds to.
If your slave server is not working right, fix it.

While starting the Bam Server getting the error(JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)).

Hi All,
i am trying to start the BAM server in Windows7 local Machine,in AdminConsole , after starting the NodeMAnager in CMD.
-->i got the server status as failed , i ahve ched the logs in E:\Oracle\Middleware\user_projects\domains\Soa_domain\servers\bam_Server1\logs\bam_server1.out
i could see the following error.
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_4\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms768m -Xmx1536m -XX:PermSize=256m -XX:MaxPermSize=768m -Dweblogic.Name=bam_server1 -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=E:\Oracle\Middleware\user_projects\domains\Soa_domain\servers\bam_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=E:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Djrockit.optfile=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\servers\bam_server1 -Doracle.domain.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\servers\bam_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1,E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dbpm.enabled=true -Dsoa.archives.dir=E:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=E:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://[2001:0:5ef5:79fb:4b5:2a1f:3f57:fdf8]:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Jul 8, 2013 10:25:15 AM> <FINEST> <NodeManager> <Waiting for the process to die: 6800>
<Jul 8, 2013 10:25:15 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jul 8, 2013 10:25:16 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
after that i changed the Listen port number of bam_server1 to from 9001 to 9003 and NodeManager from 5556 to 5557 , after that i restarted the NodeManager Still getting same error.
NodeManager after restart running on old Listen port,it is not running on 5557
NodeManagerHome=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1
ListenAddress=
ListenPort=5556
ListenBacklog=50
SecureListener=true
AuthenticationEnabled=true
NativeVersionEnabled=true
CrashRecoveryEnabled=false
JavaHome=C:\PROGRA~1\Java\JDK16~1.0_4\jre
StartScriptEnabled=true
StopScriptEnabled=false
StartScriptName=startWebLogic.cmd
StopScriptName=
LogFile=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1\nodemanager.log
LogLevel=INFO
LogLimit=0
LogCount=1
LogAppend=true
LogToStderr=true
LogFormatter=weblogic.nodemanager.server.LogFormatter
DomainsFile=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1\nodemanager.domains
DomainsFileEnabled=true
StateCheckInterval=500
UseMACBroadcast=false
DomainRegistrationEnabled=false
DomainsDirRemoteSharingEnabled=false

Hi All,
i am trying to start the BAM server in Windows7 local Machine,in AdminConsole , after starting the NodeMAnager in CMD.
-->i got the server status as failed , i ahve ched the logs in E:\Oracle\Middleware\user_projects\domains\Soa_domain\servers\bam_Server1\logs\bam_server1.out
i could see the following error.
starting weblogic with Java version:
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
Starting WLS with line:
C:\PROGRA~1\Java\JDK16~1.0_4\bin\java -client -Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=8453,server=y,suspend=n -Djava.compiler=NONE -Xms768m -Xmx1536m -XX:PermSize=256m -XX:MaxPermSize=768m -Dweblogic.Name=bam_server1 -Djava.security.policy=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -Dweblogic.system.BootIdentityFile=E:\Oracle\Middleware\user_projects\domains\Soa_domain\servers\bam_server1\data\nodemanager\boot.properties -Dweblogic.nodemanager.ServiceEnabled=true -Dweblogic.security.SSL.ignoreHostnameVerification=false -Dweblogic.ReverseDNSAllowed=false -Xverify:none -da:org.apache.xmlbeans... -ea -da:com.bea... -da:javelin... -da:weblogic... -ea:com.bea.wli... -ea:com.bea.broker... -ea:com.bea.sbconsole... -Dplatform.home=E:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=E:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dcommon.components.home=E:\Oracle\MIDDLE~1\ORACLE~1 -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Djrockit.optfile=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrocket_optfile.txt -Doracle.server.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\servers\bam_server1 -Doracle.domain.config.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1 -Digf.arisidbeans.carmlloc=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\carml -Digf.arisidstack.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\FMWCON~1\arisidprovider -Doracle.security.jps.config=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\config\fmwconfig\jps-config.xml -Doracle.deployed.app.dir=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1\servers\bam_server1\tmp\_WL_user -Doracle.deployed.app.ext=\- -Dweblogic.alternateTypesDirectory=E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.ossoiap_11.1.1,E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.oamprovider_11.1.1,E:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol"|"oracle.fabric.common.classloaderurl.handler"|"oracle.fabric.common.uddiurl.handler"|"oracle.bpm.io.fs.protocol -Dweblogic.jdbc.remoteEnabled=false -Doracle.security.jps.policy.migration.validate.principal=false -da:org.apache.xmlbeans... -Dbpm.enabled=true -Dsoa.archives.dir=E:\Oracle\Middleware\Oracle_SOA1\soa -Dsoa.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dsoa.instance.home=E:\Oracle\MIDDLE~1\USER_P~1\domains\SOA_DO~1 -Dtangosol.coherence.clusteraddress=227.7.7.9 -Dtangosol.coherence.clusterport=9778 -Dtangosol.coherence.log=jdk -Djavax.xml.soap.MessageFactory=oracle.j2ee.ws.saaj.soap.MessageFactoryImpl -Dweblogic.transaction.blocking.commit=true -Dweblogic.transaction.blocking.rollback=true -Djavax.net.ssl.trustStore=E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks -Dem.oracle.home=E:\Oracle\Middleware\oracle_common -Djava.awt.headless=true -Dbam.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dums.oracle.home=E:\Oracle\Middleware\Oracle_SOA1 -Dweblogic.management.discover=false -Dweblogic.management.server=http://[2001:0:5ef5:79fb:4b5:2a1f:3f57:fdf8]:7001 -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=E:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sysext_manifest_classpath;E:\Oracle\MIDDLE~1\patch_ocp371\profiles\default\sysext_manifest_classpath weblogic.Server
FATAL ERROR in native method: JDWP No transports initialized, jvmtiError=AGENT_ERROR_TRANSPORT_INIT(197)
ERROR: transport error 202: bind failed: Address already in use
ERROR: JDWP Transport dt_socket failed to initialize, TRANSPORT_INIT(510)
JDWP exit error AGENT_ERROR_TRANSPORT_INIT(197): No transports initialized [../../../src/share/back/debugInit.c:690]
<Jul 8, 2013 10:25:15 AM> <FINEST> <NodeManager> <Waiting for the process to die: 6800>
<Jul 8, 2013 10:25:15 AM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Jul 8, 2013 10:25:16 AM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
after that i changed the Listen port number of bam_server1 to from 9001 to 9003 and NodeManager from 5556 to 5557 , after that i restarted the NodeManager Still getting same error.
NodeManager after restart running on old Listen port,it is not running on 5557
NodeManagerHome=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1
ListenAddress=
ListenPort=5556
ListenBacklog=50
SecureListener=true
AuthenticationEnabled=true
NativeVersionEnabled=true
CrashRecoveryEnabled=false
JavaHome=C:\PROGRA~1\Java\JDK16~1.0_4\jre
StartScriptEnabled=true
StopScriptEnabled=false
StartScriptName=startWebLogic.cmd
StopScriptName=
LogFile=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1\nodemanager.log
LogLevel=INFO
LogLimit=0
LogCount=1
LogAppend=true
LogToStderr=true
LogFormatter=weblogic.nodemanager.server.LogFormatter
DomainsFile=E:\Oracle\MIDDLE~1\WLSERV~1.3\common\NODEMA~1\nodemanager.domains
DomainsFileEnabled=true
StateCheckInterval=500
UseMACBroadcast=false
DomainRegistrationEnabled=false
DomainsDirRemoteSharingEnabled=false

My Master server is stopping automatically unable to find out the issue

Dear Experts,
My Master server in CMC is stopping automatically and is going to infinite stop state.when i again restart manually its connecting but again it is stopping.what may be the cause unable to find the solution
Thanks in Advance,
Regards,
Vinay.G

Go to the Tomcat site and read the "First Web App" docs. I'm sure you didn't deploy your servlet properly.
%

The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError) Problem

hi all,
I just installed the reporting service and was configuring it.. and when i try to access it via the browser i get the following error :
"The report server installation is not initialized. (rsReportServerNotActivated) (rsRPCError)"
When i go to the configuration tool i see the initialized tab greyed out with an X. How can i fix this problem ?
Please help, i am open to ideas.

I cant get into it..
when i click on the initialize tab it goes no where.. since its greyed out.
This is what my rsreportserver:
<Configuration>
    <Dsn>AQAAANCMnd8BFdERjHoAwE/Cl+sBAAAAPMlqBjowR0Wc2PsZTt8ubgQAAAAiAAAAUgBlAHAAbwBy
AHQAaQBuAGcAIABTAGUAcgB2AGUAcgAAAANmAACoAAAAEAAAAKuZ9/RkgkVVFff8TowDacEAAAAA
BIAAAKAAAAAQAAAAYydq6zu5Vw/UKFYwQOsI8RgBAAC+zTe1u8S4v+Jr08+s9SEZiAUHrwpnpGMf
04ooFOQisqo7rVO5s7CRu2y81LGigD/AJY/gYJ7oGVui8NlMRYcPwqWp7152Foz4nmNVxbvI3Drd
hAN4k3Loi2NHXR8sP7wmBeOTDHenMR+5A0KcqXzf2q9w30wFpiC6qC7TR4ogCcDWGwCKw9UT6sMU
7WzPEtver6oMgGJYN6Otm0qf1hEEEZ8BGKzFRC3CWmm7lMi60EGIng53k/3QSu5UJ2P7J4S3dTor
eITJIfLTt+k/sRJn1gkrMP6PUGfuaAsl79AjOiDSaeluxWo/jqVwNJcKjHEpIQlaSBBOV/vD3Q1A
scKlYsUXh2lARG/AGvlS/+tWuDfF7H16eX5VFAAAAPX9eFGdbE4J/YNa1wqJn7XRfaC+
</Dsn>
    <ConnectionType>Default</ConnectionType>
    <LogonUser></LogonUser>
    <LogonDomain></LogonDomain>
    <LogonCred></LogonCred>
    <InstanceId>MSSQL.3</InstanceId>
    <InstallationID>{5dab2548-1d82-4cdf-85d8-febe60944ed7}</InstallationID>
    <Add Key="SecureConnectionLevel" Value="0"/>
    <Add Key="ProcessRecycleOptions" Value="0"/>
    <Add Key="CleanupCycleMinutes" Value="10"/>
    <Add Key="SQLCommandTimeoutSeconds" Value="60"/>
    <Add Key="MaxActiveReqForOneUser" Value="20"/>
    <Add Key="DatabaseQueryTimeout" Value="120"/>
    <Add Key="RunningRequestsScavengerCycle" Value="60"/>
    <Add Key="RunningRequestsDbCycle" Value="60"/>
    <Add Key="RunningRequestsAge" Value="30"/>
    <Add Key="MaxScheduleWait" Value="5"/>
    <Add Key="DisplayErrorLink" Value="true"/>
    <Add Key="WebServiceUseFileShareStorage" Value="false"/>
    
    
    
    <Add Key="WatsonFlags" Value="0x0428"/>
    <Add Key="WatsonDumpOnExceptions" Value="Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException"/>
    <Add Key="WatsonDumpExcludeIfContainsExceptions" Value="System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException"/>
    <Service>
        <IsSchedulingService>True</IsSchedulingService>
        <IsNotificationService>True</IsNotificationService>
        <IsEventService>True</IsEventService>
        <PollingInterval>10</PollingInterval>
        <WindowsServiceUseFileShareStorage>False</WindowsServiceUseFileShareStorage>
        <MemoryLimit>60</MemoryLimit>
        <RecycleTime>720</RecycleTime>
        <MaximumMemoryLimit>80</MaximumMemoryLimit>
        <MaxAppDomainUnloadTime>30</MaxAppDomainUnloadTime>
        <MaxQueueThreads>0</MaxQueueThreads>
        <UrlRoot>http://oneilreports/reportserver</UrlRoot>
        <UnattendedExecutionAccount>
            <UserName></UserName>
            <Password></Password>
            <Domain></Domain>
        </UnattendedExecutionAccount>
        <PolicyLevel>rssrvpolicy.config</PolicyLevel>
        <WebServiceAccount>NT AUTHORITY\SYSTEM</WebServiceAccount>
        <IsWebServiceEnabled>True</IsWebServiceEnabled>
        <FileShareStorageLocation>
            <Path></Path>
        </FileShareStorageLocation>
    </Service>
    <Extensions>
        <Delivery>
            <Extension Name="Report Server FileShare" Type="Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider,ReportingServicesFileShareDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <FileShareConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </FileShareConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="Report Server Email" Type="Microsoft.ReportingServices.EmailDeliveryProvider.EmailProvider,ReportingServicesEmailDeliveryProvider">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <RSEmailDPConfiguration>
                        <SMTPServer></SMTPServer>
                        <SMTPServerPort></SMTPServerPort>
                        <SMTPAccountName></SMTPAccountName>
                        <SMTPConnectionTimeout></SMTPConnectionTimeout>
                        <SMTPServerPickupDirectory></SMTPServerPickupDirectory>
                        <SMTPUseSSL></SMTPUseSSL>
                        <SendUsing>2</SendUsing>
                        <SMTPAuthenticate></SMTPAuthenticate>
                        <From></From>
                        <EmbeddedRenderFormats>
                            <RenderingExtension>MHTML</RenderingExtension>
                        </EmbeddedRenderFormats>
                        <PrivilegedUserRenderFormats></PrivilegedUserRenderFormats>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                        <SendEmailToUserAlias>True</SendEmailToUserAlias>
                        <DefaultHostName></DefaultHostName>
                        <PermittedHosts></PermittedHosts>
                    </RSEmailDPConfiguration>
                </Configuration>
            </Extension>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.NullDeliveryProvider.NullProvider,ReportingServicesNullDeliveryProvider"/>
            <Extension Name="Report Server DocumentLibrary" Type="Microsoft.ReportingServices.SharePoint.SharePointDeliveryExtension.DocumentLibraryProvider,ReportingServicesSharePointDeliveryExtension">
                <MaxRetries>3</MaxRetries>
                <SecondsBeforeRetry>900</SecondsBeforeRetry>
                <Configuration>
                    <DocumentLibraryConfiguration>
                        <ExcludedRenderFormats>
                            <RenderingExtension>HTMLOWC</RenderingExtension>
                            <RenderingExtension>NULL</RenderingExtension>
                            <RenderingExtension>RGDI</RenderingExtension>
                        </ExcludedRenderFormats>
                    </DocumentLibraryConfiguration>
                </Configuration>
            </Extension>
        </Delivery>
        <Render>
            <Extension Name="XML" Type="Microsoft.ReportingServices.Rendering.XmlDataRenderer.XmlDataReport,Microsoft.ReportingServices.XmlRendering"/>
            <Extension Name="NULL" Type="Microsoft.ReportingServices.Rendering.NullRenderer.NullReport,Microsoft.ReportingServices.NullRendering" Visible="false"/>
            <Extension Name="CSV" Type="Microsoft.ReportingServices.Rendering.CsvRenderer.CsvReport,Microsoft.ReportingServices.CsvRendering"/>
            <Extension Name="IMAGE" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.ImageReport,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="PDF" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.PdfReport,Microsoft.ReportingServices.ImageRendering"/>
            <Extension Name="RGDI" Type="Microsoft.ReportingServices.Rendering.ImageRenderer.RemoteGdiReport,Microsoft.ReportingServices.ImageRendering" Visible="false" LogAllExecutionRequests="false"/>
            <Extension Name="HTML4.0" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html40RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false" LogAllExecutionRequests="false"/>
            <Extension Name="HTML3.2" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.Html32RenderingExtension,Microsoft.ReportingServices.HtmlRendering" Visible="false"/>
            <Extension Name="MHTML" Type="Microsoft.ReportingServices.Rendering.HtmlRenderer.MHtmlRenderingExtension,Microsoft.ReportingServices.HtmlRendering"/>
            <Extension Name="EXCEL" Type="Microsoft.ReportingServices.Rendering.ExcelRenderer.ExcelRenderer,Microsoft.ReportingServices.ExcelRendering"/>
        </Render>
        <Data>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.DataExtensions.SqlConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB" Type="Microsoft.ReportingServices.DataExtensions.OleDbConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.ReportingServices.DataExtensions.AdoMdConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.DataExtensions.OracleClientConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="ODBC" Type="Microsoft.ReportingServices.DataExtensions.OdbcConnectionWrapper,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="XML" Type="Microsoft.ReportingServices.DataExtensions.XmlDPConnection,Microsoft.ReportingServices.DataExtensions"/>
            <Extension Name="SAPBW" Type="Microsoft.ReportingServices.DataExtensions.SapBw.SapBwConnection,Microsoft.ReportingServices.DataExtensions.SapBw"/>
            <Extension Name="ESSBASE" Type="Microsoft.ReportingServices.DataExtensions.Essbase.EssbaseConnection,Microsoft.ReportingServices.DataExtensions.Essbase"/>
            
            
        </Data>
        <SemanticQuery>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MSSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>False</EnableMathOpCasting>
                </Configuration>
            </Extension>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlSQCommand,Microsoft.ReportingServices.SemanticQueryEngine">
                <Configuration>
                    <EnableMathOpCasting>True</EnableMathOpCasting>
                    <DisableNO_MERGEInLeftOuters>False</DisableNO_MERGEInLeftOuters>
                    <EnableUnistr>False</EnableUnistr>
                    <DisableTSTruncation>False</DisableTSTruncation>
                </Configuration>
            </Extension>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.QueryExecution.ASSemanticQueryCommand,Microsoft.AnalysisServices.Modeling"/>
        </SemanticQuery>
        <ModelGeneration>
            <Extension Name="SQL" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.MSSQL.MsSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="ORACLE" Type="Microsoft.ReportingServices.SemanticQueryEngine.Sql.Oracle.OraSqlModelGenerator,Microsoft.ReportingServices.SemanticQueryEngine"/>
            <Extension Name="OLEDB-MD" Type="Microsoft.AnalysisServices.Modeling.Generation.ModelGeneratorExtention,Microsoft.AnalysisServices.Modeling"/>
        </ModelGeneration>
        <Security>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authorization.WindowsAuthorization, Microsoft.ReportingServices.Authorization"/>
        </Security>
        <Authentication>
            <Extension Name="Windows" Type="Microsoft.ReportingServices.Authentication.WindowsAuthentication, Microsoft.ReportingServices.Authorization"/>
        </Authentication>
        <EventProcessing>
            <Extension Name="SnapShot Extension" Type="Microsoft.ReportingServices.Library.HistorySnapShotCreatedHandler,ReportingServicesLibrary">
                <Event>
                    <Type>ReportHistorySnapshotCreated</Type>
                </Event>
            </Extension>
            <Extension Name="Timed Subscription Extension" Type="Microsoft.ReportingServices.Library.TimedSubscriptionHandler,ReportingServicesLibrary">
                <Event>
                    <Type>TimedSubscription</Type>
                </Event>
            </Extension>
            <Extension Name="Cache Update Extension" Type="Microsoft.ReportingServices.Library.ReportExecutionSnapshotUpdateEventHandler,ReportingServicesLibrary">
                <Event>
                    <Type>SnapshotUpdated</Type>
                </Event>
            </Extension>
        </EventProcessing>
    </Extensions>
</Configuration>
any ideas.

THE REPORT SERVER INSTALLATION IS NOT INITIALIZED (rsReportServer NOT ACTIVATED)

HI ,i had my report server on SQL SERVER 2005,and for
reporting service i am using the sql server reporting services 2008R2,i created a report which i am supposed to display in Website ,i
created the rdl using the BIDS 2008 and , its throwing me an error because my report server is in 2005 and my rdl is in 2008 and i was using it in VS2008 Report viewer control,i was told that i am supposed to create rdl in 05 in order to get
it run ,but i dont want to create another one since it was pretty big and took lot of time to design it
Is there any way i can use the same rdl with that report server ,one of my collegue told that i can do in one way (using catalog of SQL server 2008 Reporting in sql server 2005 report server database i did'nt get that much as iam not aware of that
catalog stuff .and i tried to configure the report server once again and i am getting this new error
THE REPORT SERVER INSTALLATION IS NOT INITIALIZED (rsReportServer NOT ACTIVATED)
in ssrs 2005 there initialize but in ssrs2008 r2 i couldnt found that option so can any one please help me out with this .
thnaks in advance

GO TO report server configuration and go to Encryption keys and delete encryption keys and try to run the URL again, it works.
I had SSRS2008 two installations, the second one gave this problem, this solution helped resolve it. Thank you.

Problems creating the Master Repository with MS SQL Server 2000

Hello guys!
I can't create the Master Repository with MS SQL Server 2000 database.
Wath is the correct adress in the URL?
I select the Driver: com.microsoft.jdbc.sqlserver.SQLServerDriver and the URL: *jdbc:microsoft:sqlserver://<host>:<port>;SelectMethod=cursor[;<property>=<value>...]*
Thanks
Maurício
Edited by: user857262 on 03/10/2008 10:05

Hi Maurício,
For MS SQL Server the following drivers should avaliable in /drivers folder (http://www.inetsoftware.de/),
* msutil.jar
* mssqlserver.jar
* msbase.jar
JDBC Driver is:
com.microsoft.jdbc.sqlserver.SQLServerDriver
JDBC URL is:
jdbc:sqlserver://serverName\instance:port;property=value[;property=value]
Example,
jdbc:sqlserver://myHost:1433;selectMethod=cursor;databaseName=myDB
Thanks,
G

Is it possible to move the master data from one server to onther server?

is it possible to move the master data from one server to onther server?

iOS: Transferring information from your current iPhone, iPad, or iPod touch to a new device

Move change the master Protection Server

I have a 3 SQL servers(2008 R2 SP2 Enterprise) on a four node Cluster (2008 R2 SP1 Enterprise)
These are protected by two DPM Servers 1 and 2.
DPM2 was the master protection server, backing up all databases all servers and also backing DPM1 system state, BMR and DPM SQL Server, plus all volumes as well.
DPM1 provides protection for all Protection groups on DP2 and also backing DPM2 system state, BMR and DPM SQL Server, plus all volumes as well.
DPM1 is Local to SQL Servers
DPM2 is on the end of a WAN.
I want to switch back to DPM1 and relieve stress on the WAN.
So....
I removed all protection groups from DPM2 deleting all the data.
I detached all nodes from DPM2
I ran setdpmserver on each cluster node and attched them to DPM1
I created new protection groups on DPM1 for databases.
This is were the problems started with (unable to create recovery point) and when creating PG's I had error messages about these items are protected by anther server.
does anybody know the correct procedure for doing this ?

I think that it helps you
Changing your Protection Server in DPM to another server
OR
You can create DPM 2 - primary server, DPM 1 - secondary
And you can use switch protection
DPM 2012: How to switch protection in case of primary server failure
Please read about this servers
Set up secondary servers
Setting up DPM Chaining
Have a nice day !!!

The non master server is shutting down on its own?

Hey all,
I just started have this problem this week. With HA configured I am having the non-master host restarting on it's own. I have been unable to find anything in the logs that would explain this.
Shared storage is on a FC SAN device.
2 Dell 2950 III servers
Oracle VM 2.1.2
Any Ideas? or is anyone else seeing this?

Check for ocfs2 errors on the master -- the new versions of ocfs2 automatically reboot a fenced node, which is what sounds like is happening to your non-master server. You may have to run the /etc/init.d/o2cb configure on both servers to increase the polling/heartbeat time between the two boxes, so that ocfs2 doesn't fence itself.

Please help me resolve the Lync server 2013 deployment error: "An error occurred while applying SQL script for the feature BackendStore."

I am getting an error in "Step 2 - Setup or Remove Lync Server Components" of "Install or Update Lync Server System" step.
"An error occured while applying SQL script for the feature BackendStore. For details, see the log file...."
Additionally, all previous steps such as: Prepare Active Directory, Prepare first Standard Edition server, Install Administrative Tools, Create and publish topology are done without any errors. The user that I used to setup the Lync server is member of:
Administrators
CSAdministrator
Domain Admins
Domain Users
Enterprise Admins
Group Policy Creator Owners
RTCComponentUniversalServices
RTCHSUniversalServices
RTCUniversalConfigReplicator
RTCUniversalServerAdmins
Schema Admins
I have tried to re-install all the things and started to setup a new one many times but the same error still occurred. Please see the log below and give me any ideas/solutions to tackle this problem.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.BlobStore'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Publisheracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Administrators;LCTBU\RTCUniversalServerAdmins.
Found Parameter: Replicatoracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: Consumeracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group;RTC Local Read-only Administrators;LCTBU\RTCUniversalReadOnlyAdmins.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Found Parameter: Role Value master.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcxds validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcxds validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcxds.
Checking state for database rtcxds.
State of database rtcxds is detached.
Attaching database rtcxds from Data Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath, Log Path \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
The operation failed because of missing file '\\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath\rtcxds.mdf'
Attaching database failed because one of the files not found. The database will be created.
State of database rtcxds is DbState_DoesNotExist.
Creating database rtcxds from scratch. Data File Path = D:\CsData\BackendStore\rtc\DbPath, Log File Path= D:\CsData\BackendStore\rtc\LogPath.
Clean installing database rtcxds.
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
****Creating DbSetupInstance for 'Microsoft.Rtc.Common.Data.RtcSharedDatabase'****
Initializing DbSetupBase
Parsing parameters...
Found Parameter: SqlServer Value lync.lctbu.com\rtc.
Found Parameter: SqlFilePath Value C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup.
Found Parameter: Serveracct Value LCTBU\RTCHSUniversalServices;RTC Server Local Group.
Found Parameter: DbPath Value D:\CsData\BackendStore\rtc\DbPath.
Found Parameter: LogPath Value D:\CsData\BackendStore\rtc\LogPath.
Trying to connect to Sql Server lync.lctbu.com\rtc. using windows authentication...
Sql version: Major: 11, Minor: 0, Build 2100.
Sql version is acceptable.
Validating parameters...
DbName rtcshared validated.
SqlFilePath C:\Program Files\Common Files\Microsoft Lync Server 2013\DbSetup validated.
DbFileBase rtcshared validated.
DbPath D:\CsData\BackendStore\rtc\DbPath validated.
Effective database Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\DbPath.
LogPath D:\CsData\BackendStore\rtc\LogPath validated.
Effective Log Path: \\lync.lctbu.com\D$\CsData\BackendStore\rtc\LogPath.
Checking state for database rtcshared.
Reading database version for database rtcshared.
Database version for database rtcshared - Schema Version5, Sproc Version 0, Update Version 1.
Thanks and Regards,
Thanh Le

Thanks Lạc
Phạm 2
I Had similar issue i end up uninstalling and reinstallting but same issue, then i change the drive but same issue. It was I/O issue. After adjusting my I/O it fix our issue and installation went on without any issue.
If any one using KVM here is detail article
We just give this option cache=‘writeback
using this article http://www.ducea.com/2011/07/06/howto-improve-io-performance-for-kvm-guests/ and http://itscblog.tamu.edu/improve-disk-io-performance-in-kvm/ this fix my issue thanks

Can't Start the SQL Server & SQL Server Agent Services

Hello i had to make Help Please.
2014-10-31 12:18:55.66 Server Feb 10 2012 19:39:15
Copyright (c) Microsoft Standard Edition (64-bit) 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server 2014-10-31 12:18:55.69 Server -d C:\Program Files\Microsoft -e C:\Program Files\Microsoft -l C:\Program Files\Microsoft 2014-10-31 12:18:55.69 Server -s "MSSQLSERVER"
2014-10-31 12:18:56.21 Server 2014-10-31 12:18:56.21 Server 2014-10-31 12:18:56.21 Server 2014-10-31 12:18:56.21 Server 2014-10-31 12:18:58.04 Server 2014-10-31 12:18:58.05 Server 2014-10-31 12:18:58.07 Server 2014-10-31 12:18:58.08 Server 2014-10-31 12:18:58.15 spid5s 2014-10-31 12:18:58.71 Server 2014-10-31 12:18:59.22 spid5s 2014-10-31 12:18:59.24 spid5s 2014-10-31 12:18:59.81 spid5s 2014-10-31 12:18:59.98 spid5s 2014-10-31 12:19:00.76 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 spid13s 2014-10-31 12:19:00.80 Server 2014-10-31 12:19:00.80 Server 2014-10-31 12:19:00.80 Server 2014-10-31 12:19:00.81 Server 2014-10-31 12:19:00.81 spid13s 2014-10-31 12:19:00.81 Server 2014-10-31 12:19:00.81 Server 2014-10-31 12:19:00.86 Server 2014-10-31 12:19:22.49 spid15s 2014-10-31 12:19:22.68 spid17s 2014-10-31 12:19:22.69 spid9s 2014-10-31 12:19:22.69 spid18s 2014-10-31 12:19:22.69 spid19s 2014-10-31 12:19:22.71 spid9s 2014-10-31 12:19:22.90 spid9s 2014-10-31 12:19:23.36 spid9s 2014-10-31 12:19:23.46 spid9s 2014-10-31 12:19:23.67 spid20s 2014-10-31 12:19:23.67 spid20s 2014-10-31 12:19:23.73 spid20s 2014-10-31 12:19:24.67 spid5s 2014-11-01 00:00:08.70 spid28s 2014-11-02 00:00:23.48 spid29s 2014-11-03 00:00:53.66 spid29s 2014-11-04 00:00:08.08 spid19s 2014-11-04 18:03:23.74 spid53 2014-11-04 18:03:23.79 spid53 2014-11-04 18:03:24.72 spid54 2014-11-04 18:03:24.78 spid54 2014-11-04 18:03:27.74 spid53 2014-11-04 18:28:12.10 spid52 2014-11-04 18:28:12.13 spid52 2014-11-05 00:00:26.82 spid18s a copy of my setup for a coworker in a different country to work with i can't make this two services to start. A timed out error shows and maybe the logs say something but i can't understand it.
Microsoft SQL Server 2012 - 11.0.2100.60 (X64)
Corporation
on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (Hypervisor)
(c) Microsoft Corporation.
All rights reserved.
Server process ID is 2540.
System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
Authentication mode is MIXED.
Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
The service account is 'NT Service\MSSQLSERVER'. This is an informational message; no user action is required.
Registry startup parameters:
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\master.mdf
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\Log\ERRORLOG
SQL Server\MSSQL11.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
Command Line Startup Parameters:
SQL Server detected 1 sockets with 2 cores per socket and 2 logical processors per socket, 2 total logical processors; using 2 logical processors based on SQL Server licensing. This is an informational message; no user action is required.
SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
Detected 3071 MB of RAM. This is an informational message; no user action is required.
Using conventional memory in the memory manager.
This instance of SQL Server last reported using a process ID of 2532 at 31/10/2014 12:18:20 p.m. (local) 31/10/2014 06:18:20 p.m. (UTC). This is an informational message only; no user action is required.
Node configuration: node 0: CPU mask: 0x0000000000000003:0 Active CPU mask: 0x0000000000000003:0. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
Software Usage Metrics is disabled.
Starting up database 'master'.
CLR version v4.0.30319 loaded.
SQL Server Audit is starting the audits. This is an informational message. No user action is required.
SQL Server Audit has started the audits. This is an informational message. No user action is required.
SQL Trace ID 1 was started by login "sa".
Server name is 'WIN-3FNEFF25D4V'. This is an informational message only. No user action is required.
A self-generated certificate was successfully loaded for encryption.
Server is listening on [ 'any' <ipv6> 1435].
Server is listening on [ 'any' <ipv4> 1435].
Server is listening on [ 'any' <ipv6> 1433].
Server is listening on [ 'any' <ipv4> 1433].
Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
Server is listening on [ ::1 <ipv6> 1434].
Server is listening on [ 127.0.0.1 <ipv4> 1434].
Dedicated admin connection support was established for listening locally on port 1434.
SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational message. No user action is required.
SQL Server is now ready for client connections. This is an informational message; no user action is required.
The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/WIN-3FNEFF25D4V ] for the SQL Server service. Windows return code: 0xffffffff, state: 63. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/WIN-3FNEFF25D4V:1433 ] for the SQL Server service. Windows return code: 0xffffffff, state: 63. Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually registered.
Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
A new instance of the full-text filter daemon host process has been successfully started.
Starting up database 'msdb'.
Starting up database 'mssqlsystemresource'.
Starting up database 'CMOVILBD'.
Starting up database 'ArgusTec'.
The resource database build version is 11.00.2100. This is an informational message only. No user action is required.
Starting up database 'model'.
Clearing tempdb database.
Starting up database 'tempdb'.
The Service Broker endpoint is in disabled or stopped state.
The Database Mirroring endpoint is in disabled or stopped state.
Service Broker manager has started.
Recovery is complete. This is an informational message only. No user action is required.
This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.
Attempting to load library 'xpsqlbot.dll' into memory. This is an informational message only. No user action is required.
Using 'xpsqlbot.dll' version '2011.110.2100' to execute extended stored procedure 'xp_qv'. This is an informational message only; no user action is required.
Attempting to load library 'xpstar.dll' into memory. This is an informational message only. No user action is required.
Using 'xpstar.dll' version '2011.110.2100' to execute extended stored procedure 'xp_instance_regread'. This is an informational message only; no user action is required.
Starting up database 'Argus'.
Attempting to load library 'xplog70.dll' into memory. This is an informational message only. No user action is required.
Using 'xplog70.dll' version '2011.110.2100' to execute extended stored procedure 'xp_msver'. This is an informational message only; no user action is required.
This instance of SQL Server has been using a process ID of 2540 since 31/10/2014 12:19:24 p.m. (local) 31/10/2014 06:19:24 p.m. (UTC). This is an informational message only; no user action is required.

Sorry i feel so stupid. Here it is. I can clearly see the errors now
2014-11-05 10:49:47.43 Server Microsoft SQL Server 2008 (SP1) - 10.0.2531.0 (X64)
Mar 29 2009 10:11:52
Copyright (c) 1988-2008 Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1) (VM)
2014-11-05 10:49:47.43 Server (c) 2005 Microsoft Corporation.
2014-11-05 10:49:47.43 Server All rights reserved.
2014-11-05 10:49:47.43 Server Server process ID is 4596.
2014-11-05 10:49:47.43 Server System Manufacturer: 'VMware, Inc.', System Model: 'VMware Virtual Platform'.
2014-11-05 10:49:47.43 Server Authentication mode is MIXED.
2014-11-05 10:49:47.43 Server Logging SQL Server messages in file 'c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2014-11-05 10:49:47.43 Server This instance of SQL Server last reported using a process ID of 5720 at 05/11/2014 10:28:35 a.m. (local) 05/11/2014 04:28:35 p.m. (UTC). This is an informational message only; no user action is required.
2014-11-05 10:49:47.43 Server Registry startup parameters:
-d c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\master.mdf
-e c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l c:\Program Files\Microsoft SQL Server\MSSQL10.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2014-11-05 10:49:47.44 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2014-11-05 10:49:47.44 Server Detected 2 CPUs. This is an informational message; no user action is required.
2014-11-05 10:49:47.46 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2014-11-05 10:49:47.49 Server Node configuration: node 0: CPU mask: 0x0000000000000003 Active CPU mask: 0x0000000000000003. This message provides a description of the NUMA configuration for this computer. This is an informational message only. No user action is required.
2014-11-05 10:49:47.50 spid7s Starting up database 'master'.
2014-11-05 10:49:47.59 spid7s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'SQLEXPRESS'.
2014-11-05 10:49:47.60 spid7s SQL Trace ID 1 was started by login "sa".
2014-11-05 10:49:47.60 spid7s Starting up database 'mssqlsystemresource'.
2014-11-05 10:49:47.61 spid7s The resource database build version is 10.00.2531. This is an informational message only. No user action is required.
2014-11-05 10:49:47.67 spid7s Server name is 'WIN-3FNEFF25D4V\SQLEXPRESS'. This is an informational message only. No user action is required.
2014-11-05 10:49:47.67 spid10s Starting up database 'model'.
2014-11-05 10:49:47.68 spid7s Informational: No full-text supported languages found.
2014-11-05 10:49:47.68 spid7s Starting up database 'msdb'.
2014-11-05 10:49:47.76 spid10s Clearing tempdb database.
2014-11-05 10:49:47.83 Server A self-generated certificate was successfully loaded for encryption.
2014-11-05 10:49:47.83 Server Error: 26023, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server Server TCP provider failed to listen on [ 'any' <ipv6> 1433]. Tcp port is already in use.
2014-11-05 10:49:47.83 Server Error: 17182, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server TDSSNIClient initialization failed with error 0x2740, status code 0xa. Reason: Unable to initialize the TCP/IP listener.
2014-11-05 10:49:47.83 Server Error: 17182, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server TDSSNIClient initialization failed with error 0x2740, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors.
2014-11-05 10:49:47.83 Server Error: 17826, Severity: 18, State: 3.
2014-11-05 10:49:47.83 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-11-05 10:49:47.83 Server Error: 17120, Severity: 16, State: 1.
2014-11-05 10:49:47.83 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.

NIS: Initializing the master server

Similar Messages

Maybe you are looking for