NLS patch failure and afterwards...?

Currently, System is running with R12.1.1 on RHEL 5.7
Patch 8576725 applied for language performance as pre-requisite, and 4 languages are merged to be applied.
Language license activated in OAM, and Maintain Multi-lingual Tables ran successfully.
Then while applying the NLS driver for merged languages, errors came with
AutoPatch error:
Error copying source file to destination file.
Source file is: /u01/patches/Language_Patches/target_merged_fi_sw_ru_lt/pa/forms/SF/PAXSUDRL.fmb
Dest file is: /d01/oracle/stkmnfun/apps/apps_st/appl/au/12.0.0/forms/SF/PAXSUDRL.fmb
There are some more files with the same error.
Presumably, the error seemed caused by the lack of disk space as when I checked the disk space just several dozen of MB available at the mounted point...
Or can there be also any other reason for this?
If it is caused by the lack of disk space, then the question is
When the disk space extended, can I re-run autopatch to apply the merged patch?
What could be the right procedure for this after the disk space is extended...?
Another question is;
If the problem is persistent even after disk space increase, is it ok just copy those form related files from the source to the destination?
Can anyone help me if somebody has tip for this?
Thanks.

Presumably, the error seemed caused by the lack of disk space as when I checked the disk space just several dozen of MB available at the mounted point...
Or can there be also any other reason for this?How much space do you have left?
If it is caused by the lack of disk space, then the question is
When the disk space extended, can I re-run autopatch to apply the merged patch?Yes.
What could be the right procedure for this after the disk space is extended...?Restart the failed workers or re-run the patch.
Another question is;
If the problem is persistent even after disk space increase, is it ok just copy those form related files from the source to the destination?
Can anyone help me if somebody has tip for this?Yes, but you should not get the same error if the issue is related to the disk space.
Thanks,
Hussein

Similar Messages

NLS patch for EBS 12.0.6

Hi ,
I have a EBS 12.0.6 fresh install. Now I wanted to install japanese language and i am looking for the NLS patch number. I am able to find the 6394500 for 12.0.4. Should I use the same for 12.0.6 also. Please help.
thanks in advance
Kala

Hi,
Can you help where can I find NLS patch for Japanese Language for R12.0.4 Check Oracle e-Delivery website and/or MOS. If you could not locate the files then log a SR.
Thanks,
Hussein

TS1574 My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.

My apple macbook pro retina 15'' ME664 has problems with sound.Either there will be no sound at all or at startup there il be very scary and broken sound and afterwards still there would be no sound.Secondly , it does not start in one shot.atleast 2 to 3 times pressing power button for longer time starts it up and afterwards still there will be no sound. Please help

This morning i was not able to hear sound on my recently purchased macbookpro retina 15 inch model.My attempts to resolve this issue by going to system preferences and removing the mute box that was ticked as active. i had downloaded much earlier a mac version of logmein app and noticed that in the sound box noted above that there was a bar indicating that the default was now to logmein. i had never used this app. Why it started today, i have no idea. I moved the logmein application to trash and deleted the app , however it did not remove the default option which still blocked the sound.
Going to a macforum gave the tha anser that to remove the logmein app, it first had to be reinstalled a nd them use the uninstaller option ftrom the dropdown menu. for now that has resolved the failure to allow sound oputput.

Applying NLS patches after upgrade to 12.1.3

Hi Experts,
Recently i install 12.1.1 and then upgrade it to 12.1.3.
Now i need to apply NLS patches(Canadian French and Spanish language).
On metalink i find pre-requisite of both patches and post patch are same.
The prerequisite patch for both is p8576725_12.1.0_R12_GENERIC.zip
and post patch is p6746000_R12_f.zip.
Can i apply it one by one or After applying french , i applied spanish patch ?
Can you please giude me.
Thanks
Mohammad

Hi;
Please see:
How to Add arabic language to exisitng 12.1.3
Re: How to Add arabic language to exisitng 12.1.3
Regard
Helios

Zenworks patch management and databases

Are there any known issues of Zenworks patch management deployment and corruption of Zenworks database? What would be best practices of Patch Managment and the Zenworks database?

Originally Posted by craig_wilson
Keep the Data Retention for Dashboard data low.
(No more than 30-60 days.)
Otherwise this table can grow very large and cause issues.
I believe 11.3 will have some redesign that will reduce the overhead
with that table and perhaps allow for longer retentions.
On 8/22/2013 10:46 AM, sflegnc wrote:
>
> Are there any known issues of Zenworks patch management deployment and
> corruption of Zenworks database? What would be best practices of Patch
> Managment and the Zenworks database?
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
And if you have say, 4,000 devices or more, I'd suggest even setting it down to 1 day or 7 days at the max. And set it WHEN you setup ZCM, not afterwards, because the database purge/changing isn't optimized properly (at least for Oracle).
Even with 7 days for us, it takes forever to delete a workstation/device along with a slew of other things. But Novell is aware of these things, and hopefully 11.3 will address most of the speed/performance issues.

TS1369 Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.

I am having the exact same problem. My ipod has been stuck in disk mode for over two hours and now itunes is frozen.

I desperately to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in in library but the folder is empty. Can anybody help me?

I desperately need to uninstall adobe reader from my Mac book air. I sent adobe reader to trash and afterwards look for internet plugs in library but this folder is empty in my library. Can anybody help me?

I looked for plugs in in my library but the folder internet plugs in is empty

I had a drive failure and lost the iWeb file along with other things. I did manage to save a lot of user file documents but I don't see or recognize the my iWeb site file. It was on a 15" G4 Titanium pb. I'm trying to find a way, using version 2.0.4

I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]

Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT

How to monitor OSD TS failure and get alert or report?

How to monitor OSD TS failure and get some alert or generate an report?
We have SCCM 2012 R2 CU1 with MDT 2013.
I have checked the OSD reports in SCCM and everyone is emty, where do SCCM get data to the what to activate?
(I thinking of "Task Sequence - Deployment Status" reports)
I am not sure people read report manually or lock at the MDT monitor view. So best I think that generate an email or incident in Service Manager when an TS fails.
We do have SCOM, SCSM, SCO.
Is there anyone that can point what way or what option I have?
/SaiTech

Specifically you could use this Status Message Query syntax to monitor your Task Sequences for errors:
select stat.*, ins.*, att1.*, att1.AttributeTime from SMS_StatusMessage as stat left join SMS_StatMsgInsStrings as ins on stat.RecordID = ins.RecordID left join SMS_StatMsgAttributes as att1 on stat.RecordID = att1.RecordID inner join SMS_StatMsgAttributes
as att2 on stat.RecordID = att2.RecordID where att2.AttributeID = 401 and att2.AttributeValue = "DOJ200A1" and stat.SiteCode = "DOJ" and att2.AttributeTime >= ##PRM:SMS_StatMsgAttributes.AttributeTime## order by att1.AttributeTime desc
Just replace DOJ200A1 with the Deployment ID of your Task Sequence and DOJ with your SiteCode.
If you want to generate an alert if the TS fails then you could run a script that calls a utility (or similar) which sends a pre-configured email to a specified address (as an alternative to Torten's response). This could be placed in the built in error
logging section of the SCCM integrated MDT Task Sequence when it fails which I assume you are using (right at the bottom, called Gather Logs and StateStore on failure).
There are heaps of ways of generating an email from a TS and controlling error logging just do a search - as you have Service Manager you could even use your instance of Orchestrator and call a run book in your TS which does the email?
Cheers
Damon

When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

When I take a picture with my iPhone 5s and afterward turn it laterally, the picture will not turn. It used to all the time. How do I fix this?

Hi there dworthen,
It sounds like you are experiencing issues when trying to rotate your display. I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Screen does not rotate
http://support.apple.com/kb/TS3805
-Griff W.

I just installed version 7 of Firefox and afterwards it told me my security module for my firm's bank account was disabled. Now I can't access my account and the bank is in Brazil. I MUST make transactions from the US. How can I go back?

I just intalled version 7 of firefox and afterwards it told me it had disabled a security module for access to my bank account. The account and my company are in Brazil and I am in the US. I must have access to perform transactions. Had the program warned me I would not have "upgraded". To reinstall the security module I must be physically in Brazil because a code is text messaged to my local cell phone as one of the securty precautions and I am in the US and Europe for t3 to 4 weeks. I need to make a wire transfer during that time and cannot do so now. How can I go back to the old version and recover the bank access? Thank you.

You can download last Firefox 6 version from [http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-6.0/ Here]
Regards

Trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password

I am trying to restore my Mac OS after a hard drive failure and my password is no longer recognized, however I can log in by double clicking on the Lion Icon? How can I reset my password

First, make sure caps lock is not on.
Another reason why your password might not be recognized is that the keyboard layout (input source) has been switched without your realizing it. At the login screen, you can cycle through the available layouts by pressing the key combinationcommand-space or command-option-space. See this support article.
If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions.

Music Files Deleted After Hard Disk Failure and First Sync After Hard Disk

Hi,
I recently had a hard disk failure and lost all of the data on my hard drive. I replaced the hard drive and reinstalled all of the software including iTunes. I am running Windows XP Home. The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes and since iTunes had no music files it deleted all of the music files on my Nano. How do I get them back and why on earth would iTunes do such a stupid thing??? My Nano contained many songs that I bought from iTunes and I want to get them back. I have found some third party software that will undelete the deleted files but it costs $69. I don't feel that I should have to pay to correct a defective feature in iTunes. Does Apple have an undelete utility? Can I redownload the songs that I purchased from iTunes?

*The first time I plugged my iPod Nano into my computer after the hard drive replacement it synced to iTunes*
When you connected did you get a message that your iPod was linked to another library, and then press Erase and Sync? When an iPod is set to update automatically and you connect to a computer with an empty iTunes and accept the message above it will erase the originals completely (as you have discovered). Also as you've seen, none of the recovery programs are particularly cheap so you have to decide if in your particular circumstances it's worth it to get your songs back. It may be if you have a lot of purchased tracks which you will have to pay to download again. If they came primarily from your CDs then it's most likely not as you can re-rip them.
*Can I redownload the songs that I purchased from iTunes?*
If you didn't make a back-up of your purchases to restore from then I'm sorry to say that the policy on lost purchases is that you have to pay to download them again:
"Once a Product is purchased and you receive the Product, it is your responsibility not to lose, destroy, or damage the Product, and Apple shall be without liability to you in the event of any loss, destruction, or damage." iTunes Store: Purchased content can be downloaded only once
You could try contacting the iTunes Music Store Customer Service and you might be able to persuade them to sanction a second free download. There have been occasional reports in the iTunes forum of this happening, however just be aware that they are not under any obligation to do so. If you click on any of the links on this page you'll find a space at the bottom to email your query: iTMS Customer Service

Cisco ISE 1.2 and Cisco ACS 5.4 patch 6 and support for snmp version 3

does anyone know if cisco ISE version 1.2 patch 8 and Cisco ACS 5.4 patch 6 support snmp version 3?
ciscoISE/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
ciscoISE/admin(config)# snmp-server
Ciscoacs/admin(config)# snmp-server ?
community Set community string
contact    Text for mib object sysContact
host       Specify hosts to receive SNMP notifications
location   Text for mib object sysLocation
Ciscoacs/admin(config)# snmp-server

No support SNMP v3 on ISE v1.2 and 1.3 except for profilling
http://www.cisco.com/c/en/us/td/docs/security/ise/1-2/cli_ref_guide/ise_cli/ise_cli_app_a.html#12768
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/cli_ref_guide/b_ise_CLIReferenceGuide/b_ise_CLIReferenceGuide_chapter_0100.html#ID-1364-00000d30

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about?

My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.

Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional.

NLS patch failure and afterwards...?

Similar Messages

Maybe you are looking for