No Audio on HD ripped movies on ATV3 with v5.1

I really enjoy streaming movies and the like from my iTunes library to my three Apple TV's (2xATV2 and 1xATV3). I have ripped and encoded much of my DVD collection and once i got around the audio channels and the fact that i need to have the primary as Stereo I haven't looked back. I use DVD ripper on an old PC and then create the MP4 file with Handbrake on my iMac......fantastic.
recently I have started ripping and converting my Blu-Ray collection into HD mp4's using Pavtube on my iMac. Again i seem to have no problem creating and watching them until recently i.e. Sunday when I upgraded my ATV3 to firmware v5.1........I now get no audio from HD files that i have ripped but no issue with DVD's or downloaded HD content.
My iMac plays the movies fine through iTunes, they play absolutely at 720p on my ATV2's (still on firmware 5.0.2) it's just my ATV3 where i have the problem.
So I have a few questions: -
1. Has anyone else experienced this tedious phenomenon?
2. Is it possible to downgrade the firmware upgrade to v5.0.2?
This isn't the first time that i have encountered oddities with firmware upgrades and an apparent lack of regression testing, but I love the products and what they offer when working. My kids and my wife can make it work!
Thanks

I thought this would be much simpler than its turning out. haha. i wish there was a simple way to take my MKV blu-ray rip and create a perfect copy that was playable on my apple tv.
that way i could store my blu-rays away and always have digital copies ready to play but without losing video quality!
i'll check out Blu Ray to Apple TV Ripper (yes im on a mac)

Similar Messages

Swapping audio channels in one movie

Hi,
I ripped the music video of The Streets, "Fit But you Know It" from the DVD of The Football Factory using Handbrake, and it turns out that the stereo channels are reversed: left is right and vice versa. This is a source problem, and not one created by the encode process. What's the simplest way of swapping the audio channels for this movie only?
I'd rather not re-encode the rip in the process, in order to avoid quality degradation. Handbrake GUI, unfortunately, doesn't offer any options for swapping the channels during encode. I tried using QuickTime 7, and was able to re-assign the channels in the Properties window, and then save the file as a self-contained movie. Unfortunately, QuickTime X ignores the change in the new file, even though QuickTime 7 recognizes it.
Suggestions? The resultant file should be natively compatible with QuickTime 7, QuickTime X and iTunes.
S.

I would leave it mono in the timeline and export to stereo.
It wont be real stereo but you will have the same audio on both channels.

K8N Neo4 Platinum Freezes playing ripped movie from hard drive???

System freeze's up usually after a half hour to 50 min of playing a ripped movie. Sometimes after freezing up reboots and stops at the raid boot. If you reset usually comes up missing the NTRL... or so. So I power down sys. wait 30 secs. to min. reboots fine. This also will happen if computer sits idol. Power Saver feature is turned off in Display setup, also no screen saver. Not sure if there was any of these features in the Bio's
AMD64 3000
Bio's 1.5v
Arrow 650 max (+3.3v - 45A) (+5v - 42A) (+12v - 22A) (-5v - .5A) (-12 - .8A) (+5vsb - 3A)
Kingston (KVR400X64C3AK2/1G) 2 - 512MB Dual Channel 2.6v set to. not sure what to set anything else to?
PowerColor X850 Pro 256MB
Maxtor PATA 40 Gig
Maxtor PATA 120 Gig
extra but pulled temp.
PATA Raid 5 Card Promise 4000 Lite w/4 - 250Gig Western Digital
Pulled out to see if it was a prob but made no difference.
The intention for this computer is as a Movie Server of all my DVD's to eliminate the load time, and to prevent damaging disc's by touching, possible drops. currently have a 300DVD changer and a 400 dvd changer expected any day. Preferr to have instant load instead of waiting for discs to load.
Future intentions are to add 500 gig drives when prices come down to a reasonable price.
Is this a nvidia driver prob? Any help appriciated
Thanks Matt

Quote from: iceman0304 on 22-July-05, 19:17:13
CPU-Z
Freq- 200.9
FSB Dram- CPU/5
CAS# Lat- 2.5 clocks
RAS# to CAS# Delay- 3 clocks
RAS# Precharge- 3 clocks
Cycle Time (tras)- 8 clocks
Bank Cycle Time (Trc)- 7 clocks
Dram Idle Timer- 256 clocks
These are the timings of the memory tab, aren't it??
If they are in BIOS put the CAS value to 3. because if go to the SPD tab you will see that the CAS value at 200Mhz is 3, I think....
Did you give more volts to the memory, as I sugested in my previous post??
Be well....

Audio file missing from MOV when exported as a quicktime movie.

Using Keynote 9, I imported video into presentation that was edited in iMovie 9. When I export the presentation to quicktime movie the audio is missing from the video file. The audio file plays fine in the standard keynote presentation mode.

This is STRICTLY a work around! Official fix will come from Apple as an update more than likely.
Duplicate item first (File > Duplicate). On newly duplicated project change file association type (File > get info). Under name and extension section take out .key). Close Get Info and save with removing .key. Double click to open the file (now a compression). Open uncompressed folder (same name as original file, now shows as a folder). Now in the Data folder find a .mov file named "Recording" with randomly generated letters and numbers behind it. Drag .mov file to desktop or any other directory. Open extracted .mov file with QuickTime to verify integrity. Save as audio file only. Get Info on file again and place .key value at end of file/extension for project. Open project. Under Play menu option delete the recording. Under Audio inspector drag the .mov of audio only to recording back in. Test play project to see if its accurate. Export to QuickTime and see if issue is resolved.
If issue persists:
Export with corrupted audio as QuickTime. Separate the audio from video track. Delete audio. Import the extracted .mov audio file. Share > File. Enjoy.

Audio not playing in mov format K'08

Ive seen a lot of threads but none had a solution to this.
With the slides, I included an mp3 from within itunes
dragged it from the media window into the documents soundtrack box
clicked looped
and played just fine throughout the manual presentation.
clicked export to .mov
checked include audio files
when the mov plays it is silent.
I tried one workaround, using the newly recorded audio file reimported into keynote 08 and exported again - still silent
has anyone figured out how to get the audio to play in .mov?
thanks

Believe it or not, I've been having this same problem since I bought my Imac G5 a few years ago. It just happened to my MacBook Pro, as well. Along with the fact that mpg audio is gone, so is flash audio. It seems to happen every so often, usually after one of my computers hang while loading a preview for a flash movie. The problem actually seems to correct itself after a few restarts, or loading of some programs.
In the process of writing this post, I regained support for mpg audio, and flash audio - and in quicktime player for that matter. When I started writing this, it didn't work. I dunno, quicktime is weird that way. The longest time I was without flash or mpg audio was for a period of 3 weeks. After which, it somehow was magically there again. I wish that wouldn't happen, as it usually happens at the most inconvenient times. The whole way flash is not supported through newer versions is rather irritating as well isn't it? Use SAFlash player for mac for those if you can: http://www.adobe.com/support/flashplayer/downloads.html
(sorry a little off topic there)
MacbookPro17" Mac OS X (10.4.7) Imac G5, PowerMac G3, Mac LC

Aimersoft ripped movies not playing on ATV2

I use the program Aimersoft DVD ripper to rip movies to my hard drive then I upload them to my iTunes so they'll play on my ATV2. Haven't had any problems with this until today. A movie I just ripped will play on my iMac just fine and will show up on my ATV2 screen but when I press play it won't play. I've checked all of the settings in iTunes for the movies that play correctly and nothing is different in the one that won't play.
Any suggestions?
Thanks!!!

May not help but ocaasionally restarting AppleTV/iTunes can actually fix some hiccups with the device.
If you have used the software without issue in the past, is it possible you've picked the wrong encoding setting/s this time? Might be worth trying again?
I have no experience with the software you mention and as others have said we can't discuss such things in detail anyway.

TS2289 I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

I updated iMovie and now why isn't there any audio when I import movies from my Sony camera?

What version of iMovie?
What camera?

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

Hi, I have downloaded some avi files and mov files. i am not getting audio while playing the movie. i tried to play with iTunes, QT, DivX player. but I am getting audio in mp4 files. can u help me to fix this

First, back up all data and then uninstall "DivX" according to the developer's instructions.
Then try this:
VideoLAN - Download official VLC media player for Mac OS X

Can one cut and paste an audio clip within a movie to use in another place?

can one copy and paste an audio clip within a movie to use in another place? Any help would be appreciated. Thanks

If you are wanting to use the audio from clip A into clip B then try......
First check that Advanced tools are enabled: iMovie>Preferences>General>Show Advanced Tools.
Drag clip A from the Event UPON clip B in the Project. When you release the mouse you will get a pop up menue.
Select Audio Only. Note the other options for another day!!!!
You will get a green bar as Karsten mentions above ( move it , shorten it etc, etc.)
Show Audio Waveform by selecting Blue Waveform Box ,bottom right of Project Window.
You can adjust audio level from clip A and clip B to your requirements.You can set either to zero volume if you require.
This may not be what you meant by "to use in another place "
If you want just the audio to use outside of iMovie, try;
With the required clip/clips only in the project> Share> Export Using Quicktime and in Export Select "Sound To AIFF. Save to desktop in the first instance so you can easily find it.

Adding a blank audio track to a .mov file

Hi,
I have a .mov file that I am trying to convert to MPEG-1 for burning to a VCD. I converted two .mov's that had audio in them, but now need to convert three that do not currently have an audio track. (Converting using ffmpegX)
I've created a blank audio file in Quicktime that is longer than any of the .mov's. Is there an easy way to add the audio track from the audio file to the .mov file without one? I could probably do it in iMovie if I can't do it with Quicktime, but would rather avoid that....

Open both files in Quicktime. Select All on the blank audio file, copy, then switch over to the MPEG-1 file.
Make sure the cursor is at the beginning of the film, then select "Add to Selection & Scale" from the Edit menu.
That should do the trick.
All of this, though, only works in QT Pro, which is very much worth it!
Good luck
Dual 2.5 GHz PowerPC G5 Mac OS X (10.4.7)

Any way to increase audio level of your movie?

I've uploaded a taped video into iMovie and when I play it back, the volume level is too low (I can hear it but it's not loud). I've increased the system pref vol, the vol level, and the volume level in iMovie so everything has been turned all the way up.
I saw where you can extract the audio. What can you do with it when you extract it? Incresase it? And if you can increase it, how would you add the audio back to the movie?
What I want to know is, is there another way to increase the volume if you've turned up all the computer volume controls and it's too low?
Mark

The best place to increase / adjust audio levels assuming the source video footage has something to work with is in the video editing app. Have you tried posting this question to the iMovie forum?
If your iMovie has low audio levels to start with then this will also be reflected w/in iDVD if no adjustments are made beforehand. Hope this makes sense.
Also check in the iMovie Help Menu if you haven't already:
I can't hear the audio in my movie
If you can't hear some or all of the audio in your movie, here are some things you can check:
Make sure your computer's volume is turned up. Use the speaker controls on your keyboard or the volume slider in the menu bar.
Use the volume slider below the iMovie monitor to increase the movie volume.
Make sure the audio checkbox is selected for the track you want to hear. The audio checkbox is to the right of each track in the timeline viewer.
If the audio checkbox is selected, then choose View > Show Clip Volume Levels and see if the audio levels for the tracks are set to a level that can be heard.
Making your movie louder or softer
If you find that all or part of your movie is too loud or too soft, you can adjust the volume of your movie in the timeline viewer. You can increase or decrease the volume of the entire movie or just specific audio clips. For example, at a certain point in a video you might dramatically increase or decrease the volume of accompanying music.
IMPORTANT: These instructions are for setting the volume of video that people will hear as they play your movie. If you only want to adjust the volume of your computer's speakers, see "Adjusting the volume of your computer in iMovie HD" below.
To make your movie louder or softer:
Click the Timeline Viewer button (shown above).
Select the clip or clips whose volume you want to change in the timeline viewer.
Tip: To learn how to select multiple clips, see "Selecting clips" below.
Click the clip volume button (shown below), and then drag the slider to adjust the volume.
Tip: You can also type a new percentage in the field next to the clip volume button to adjust volume.
You can also make finer audio adjustments within a clip. For more information, see "Fading audio up or down."
Message was edited by: SDMacuser

Appliaction to replace audio tracks in QT movies

Helloo,
I am looking for utility to replace original audio tracks with a new audio tracks in exisiting QT movie.
Technically, there is a folder A with QT movies (Video and Audio track in each) and folder B with Audio files only (length of movies and audio files is the same). I need the utilty that takes file from folder B and replaces na audio track in QT movie in folder A with it (matches by file name).
The reason I need this is that I've got a QT movies and I need to enhance an audio tracks. I can extraxt audio files, send them to audio batch processor, get them back... and I need another batch application to exchange original files with the new, processed files.
I know it could be done with Apple Script, but I feel that something ready to use could exist...
It would be great if there is a single applicaiton that can do it (audio extraction - processing - exchange).
Thank you.
Peter

Hi,
yes, I know. But I am looking for a way how to automatize this task. I am talking about a thousands of short movies and I need to process their audiotracks. I don't want to do it manually ...
Peter

Hearing Audio from placed background movie

I am trying to line up my audio from a FCP .mov file. When I play my movie...the video plays fine in LType but there is no audio that plays. Is there a setting Im missing? This has worked before for me where I can hear my audio adjust the graphics and all is well. Any help is appreciated!

What you probably want to do is,
From within FCE/FCP/FCS is
1. place timing markers within the sequence timeline.
2. File->Export->For LiveType and include the appropriate markers.
From within LT is "Importing a Background Movie With Timing Markers" which is found on page 45 of the LT2.1.4 manual.
My $1.45 worth. Hope it helps, even though it maybe a different workflow to what you had in mind.

Ripping movies onto Macbook Air

I recently bought a Macbook air and want to rip movies onto the disk for when I'm traveling. I bought the Superdrive, but only to get my DVD's onto the hard disk.
How do I do this? Is there some sort of application included in Leopard or do I need to download something external?
Thanks,
Dom.

Hi,
sorry, but since ripping is considered illegal in some countries, Apple doesn't allow discussion of such topics here. Of course, it is as important as a handbrake for your car... and you might get a clue from the last sentence.
Volker

Since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

since upgrading to osx 10.9.5 the audio on my quicktime movies are now garbled. is there a fix?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|(Bo|PO).+ sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA$|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:| VALI|xpma' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,Inter,iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" '/S*/*/Ca*/*xpc* >&- ||echo No' );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors XPC\ cache );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 50 32 52;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

No Audio on HD ripped movies on ATV3 with v5.1

Similar Messages

Maybe you are looking for