No audio when creating generator.

I just created a generator and all looks fine. Audio plays in the Motion timeline but does not play in FCP X. What am I doing wrong?
Cheers.
Tom

Any audio used in any effect created by Motion will be in the Media folder for the template once saved. If you're creating an effect/generator for public use, just include the instructions that the audio file can be found in that location and it will have to be imported separately into FCPX like any other media.

Similar Messages

Slideshow Elements 9: Lose audio when creating a .pdf file from the slideshow

I created the slideshow in Elements 9. Works great. Created the .pdf and I lose the audio. I'm trying to send the slideshow via email so it can't be too huge, so I didn't consider the .wmv. In troubleshooting it mentioned removing the artwork as one potential issue and didn't get into detail as to the other problems could be. So I removed the artwork in Itunes from the .mp3. I converted from .mp3 to .wav to see if that made a difference. Neither helped. I was able to create the .pdf of a slideshow with audio in Elements 7. What do I do to make it work?
Trying to get this figured out to send the slideshow for Christmas so any help/suggestions are appreciated...13 days to go

Sorry for the late reply. Have you been able to send the file?
However, i created a slideshow with a mp3 file and when i output the same into pdf format, it just played fine with the music i applied while creating.
Can you mention the number and size of the files that you used to create the slideshow.
Just to add, you can also create online albums with various templates like christmas and many more and can share them with friends.

PSE 8, No audio when creating a slide show

I am unable to create a slide show with audio. All other functions in the slide show function properly but unable to get the audio portion to play. Receive error message "Unable to add audio file, the selected file cannot be played because your system does not have the required compressor/decompressor (CODEC) installed." Checked and all the Vista CODEC's are installed & functioning properly. Checked and downloaded the latest CODEC from Realtek for the audio board. No audio recognized within Organizer or from file folders. Went to Adobe Tech. and got brushed off. Any thoughts or ideas would be greatly appreciated.

1. I have Windows Media Player 11. It plays my music files which are mostly .MP3 I am unable to locate the Adobe music files using Windows Explorer. May be an indication that they didn't load when the program was installed. I have uninstalled and re-installed PSE 8. from my disc's.
2. I Tunes is my primary player.
3. OS is Vista Home premium
After running around in circles for several days I have tried the following:
1. I opened PRE8 and created a slide show and imported audio file from my music folder. Played OK. Slide show performed OK. I did not locate the included music folder with program.
<edited>
3. In PSE8 I searched with Windows Explorer and could not locate any audio music files. The error message I receive is:
"Unable to add the audio file (C:\Program Data\Adobe\Photoshop Elements\6.0\usic\A_Taste_Of_Sicily.mp3) The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed."
Note that it is searching in PSE6 for the file. I missed that before. I long ago uninstalled PSE6 and PSE 7 was installed in its place and since PSE8.
Now I am suspicious that the music files never loaded with the install of PSE8 and it is searching for music files that no longer exist. Not sure what is corrupted and not sure what else to try. I think I will reload PSE7 and see if I can locate the included audio files and attempt to load a slide show with PSE7.

Garbled Audio When Creating Text Title

Hi!
I am having a problem with iMovie. I am new to using the software so I hope this isn’t something obvious that I’ve missed.
I wanted to add a title to the opening clip of a project. I laid it out and previewed it and it worked fine. When I placed it in the timeline, and allowed it to finish creating the clip with the title, the audio was garbled. I tried doing it a couple of times but still no success. Any ideas what went wrong?
Thanks in advance,
Fred

Hi Fred - I don't know what caused your problem, but try extracting the audio before you again try to superimpose the title. The extracted audio should remain locked in place, on the top audio track.
Hope this helps.

Problem with the audio when creating optimized media...

I am having a problem with the quality of my audio after I transcode the clip to optimized media. It sounds fine originally, and I have listened to the clips when I first import them, and they sound fine, it's only after they're optimized that they sound bad. There is a clicking sound that is randomly distributed throughout the clip. I thought at first that maybe this would be fixed after I published the content, as the whole point of optimized media was to make it lesser quality to improve performance while editing, but even when published the clicks could be heard distinctly. I tried editing the content with out optimizing the mdeia, but the editing is too slow as I am working with high quality media.
Has anyone had this problem? Anyone have an idea on how to I might be able to fix this?

One way would be to make sure the Preferences window under the Import tab says not to use optimized media. Then go to the timeline and Control Click the clip. Choose Reveal in Event Browser. This will select the clip in the event browser. The originally specified in and out points will be represented in the yellow border on the clip. Then in the File menu choose the Import ... Files and specify the original media. The clip in the event browser will be filled in again from the new import, and the timeline clip will also be replaced with the new material. In and out points will be honored and effects will still be in place on the timeline clip.
Now, I use this procedure to reconnect clips all the time ... I have not used it before to switch formats from optimized to original media so there is a little guessing here on my part. The option, of course, is to simply reimport from a camera archive or the camera of the SD card into a new clip then replace everything ... Again, this would need to be done having turned off the preference item to use optimized media. Hope this helps a little. Best wishes.
stephen

Display name not getting generated When creating user thorugh GTC

We are using GTC flat file as a trusted source. We see that display name not getting generated. And same thing happening when creating a new GTC mapping.
previously when we ran with few test user got created with display name through GTC flat file , Suddenly we see this issue display name not getting generated through flat file recon.
Manually user creation has no issues.
Please let me know if you have any idea about this issue.

Don't use GTC... GTC is inflexible and buggy technology... Nothing guaranteed... Rather create your own custom trusted recon code...
For more details
26 Known Issues of Generic Technology Connectors
http://docs.oracle.com/cd/E10391_01/doc.910/e10360/issues.htm

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

Cannot generate accounting doc when creating billing doc

When creating billing doc, no accounting document is generated, the posting status is "Error in accounting interface". I have checked and there is no problem in account determination. Does anyone get idea on this problem? Thanks!

Check the account determination in Transaction Code VKOA.
If the data is not maitained to determine G/L, in that case it gives error. Once you maintain the relevant data in VKOA, next go to billing document in change mode VF02 & release the same to accounting.
Regards,
Rajesh Banka
Reward points if helpful.

Change pointers are not generated when creating a material master

Dear Experts,
Change pointers are not generated when creating a material master.
However, when a change is made to the already created material, the change pointers are created according the fields in BD52.
Am I missing any settings?
I need to create change pointers immediately when I create the material master in MM01.
Please suggest.
Regards,
Shetty

did you follow the steps given in
http://help.sap.com/saphelp_nw73/helpdata/en/4a/6dcbe9c95261a3e10000000a421937/frameset.htm

Error when generating program when creating CVC using infoprovider

We are receiving the message "Error when generating program" when
creating CVC using infoprovider.
This may have something to do with the fact that we added an attribute
to the infoObject 9ALOCNO. We are getting an information message if we
run a consistency check in the POS.
We had this same issue in our development system. Here, I deactivated
and then reactivated the CVCs and this resolved the problem. However,
this is not a good solution since this is also a problem in our
production system and we do not want to deactivate the POS.
is there another option to fix this problem?
Thank you,
Rumi

Hi Rumi,
i would try these:
1. Make sure the cube is active and every thing ok there
2. Run programs /SAPAPO/TS_PSTRU_CONS_CHECK on POS and /SAPAPO/TS_LCM_CONS_CHECK on planning area respectively.
3. Check the CVC creation log in transaction /n/sapapo/mc62 for more details.

"Initial column cannot be generated" error when creating a planning book

Hi,
I have an error when creating a planning book with the planning book wizard. In the tab "data view", I enter values for the "Visible" and "Input" fields and validate. The following error is generated: "Initial column cannot be generated" and then "Maintain the time for the 'column visible from' field". I tried with different dates, and get the same error.
I am running SCM 5.0.
Any help would be greatly apreciated.
Regards,
Mikael.

Hi,
Generally these error come when we manually enter the value in the Visible and Input column. Instead we should try select value from the Drill down options which gets generated based on the Time Bucket Profile you have selected as input for Planning Horizon.

When I generate the "Create Process Manual" Report I'm not getting any links

Hi
I have a BPMN diagram in Oracle BPA 11.1.1.3. Many activities have links. When I generate the "Create Process Manual" report I don't get any links.
Regards

Thanks, HDMI does not appear to be option in either output or sound effects. Even when connect the RCA to the headphone jack. then and option appears in both output and sound effects, heaphones. Still not working.

Audio problem when creating slideshows

When creating slideshows in Adobe Photoshop Elements 9.0 I do not get any audio/music in the .pdf file.
I can get audio in preview and if I create a .wmv file but not in the .pdf file.
Why?
I seen some discussions on the forum but no real answer.
I have tried to add the document as a trusted document in the preferences.
I have tried with Adobe reader 7.0, 9 and X. Nothing works.
Note: My music is longer than the slideshow since I would like music during the whole slideshow. It is one musicfile.
I run on a PC, Windows XP, servicepack 3.
Is this a bug in Adobe Photoshop Elements??
Some error by me?
Or is there a workaround?
/Tor

OK!
Thank you!
Seemed so strange since the Adobe Photoshop Album 2.0 was able to do this. Sad that this function disappearred. Is there another way to get music in the .pdf file?
The .wmv file seem to distroy the picture resolution quite a lot. I get the impression that if I set the .pdf and .wmv output to same resolution the .wmv file gives pictures that seem to be done with a lower resolution (that the pictures get damaged in the transformation) . .....and as an extra disadvantage the file gets big.
Do you have any suggestion for what you think is the best option for me to do a slideshow?
Best regards
/Tor

How to generate an id for a vendor when create a new one?

Dear friends,
How to generate a new id for a new vendor when create the new vendor?
Thanks a lot!

>
Qiwei Yin wrote:
> Dear friends,
>
> How to generate a new id for a new vendor when create the new vendor?
>
> Thanks a lot!
Hi,
For many account groups, there is no need to specify vendor number while creating a new vendor. They will take internal number assignment and you can leave this field blank.
For external number assignment, you can assign you own number.
If you are creating vendors through program, and you want your vendors in a particular format, you can use your own number ranges created through SNRO.
regards
Sreenivas

Objects created when creating table maintenance generator

Hi guru's,
I heard that when we creating a table maintenance generator for a table, it will create view,search help and some else.Is it true?
Please tell me what objects will be created when we create table maintenance generator for a table and why? what is the exact use of creating table maintenance generator for a
table other than reduces the time for entering large volume of data.
Regards,
Rakesh.

Hello Rakesh,
TMG is a tool meant and designed to maintain Customizing table/views. Customizing essentially means, that the data should be transportable across clients/systems.
All this, and the facility to maintain data (display, edit, create, delete, translate) is provided by the TMG. When you make the changes like above, the TMG also provides you features to automatically also enter the changes into transport requests.
Coming to what objects are created when you generate a maintenance dialogue -
1) A Customizing Object (merely a class C/G table or view does not become a
                                    customizing object)
2) A function group (as entered in SE54 details, if the function group does not already
                              exist)
3) Lot of coding within the function group (Func modules, subroutines, includes)
4) Screen(s) (1 or 2, depending on a setting in the TMG)
5) An automatic recording of all these objects into a transport request, for you to conveniently ship them to other systems in your landscape (this, if automatic recording is
switched ON in your system)
Authorization group - It is not created automatically (unlike function group). You need to specify an existing Auth group, or use a different functionality to create on of your requirements.
Does this answer most of your questions? Please revert if you need more clarifications.
Regards
Rekha
PS: Actually, why dont you try generating a maintenance dialogue for a sample z-table and see what all gets generated?

No audio when creating generator.

Similar Messages

Maybe you are looking for