NO BATCHES FOR TRANSMISSION
We've upgraded our XI server and now when connecting to an FTP site to pick up a file we are receiving the following error...
Could not process due to error: com.sap.aii.adapter.file.ftp.FTPEx: 550 *** ERROR *** NO BATCHES FOR TRANSMISSION
Has anyone seen this error?
Also the file does exist and is able to be picked up by our server that wasn't upgraded.
Thanks
Hi,
To configure FTP Protocol in XI, please go through all the following links. They should help you do the same.
http://help.sap.com/saphelp_nw04/helpdata/en/8c/607fe4756b654ab9f420097c29f6e9/frameset.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/9a50465ccf84479e39a6d50c90fb3f/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/6c9442c22d1131e10000000a1550b0/frameset.htm
Configuring the Sender File/FTP Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/e3/94007075cae04f930cc4c034e411e1/content.htm
Configuring the Receiver File/FTP Adapter:
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://www.sapgenie.com/xi/
http://help.sap.com/saphelp_nw04/helpdata/en/43/0e16bfd7b021aee10000000a1553f6/frameset.htm
If content conversion is involved, You have to mention the field names in header of data type: fieldNames. Hence if the key field is not present it will throw an error in adapter monitoring, FIELD NOT FOUND.
To make note mapping cannot be performed with a flat file as XI understands only XML. Hence content conversion required.
Please go thru these links for step by step procedure to do the same:
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/sap.user72/blog/2005/01/06/how-to-process-csv-data-with-xi-file-adapter
Hope they are helpful for you.
Regards.
Praveen
Similar Messages
-
Goods receipt of more than one batches for Production Order
Hi ,
We are assigning the Batch number in CO01 t code as A1234.1 for Order quantity 100.
I am doing the partial GR and also for the next successive GR's I want to do the GR with batch number as A1234.2, A1234.3..
System is not allowing me to do the Goods recipt for the Batch A1234.2, .3, .4...in MB31.
Please let know if any other way to Goods Receipt.
Amit ShahWe are assigning the Batch number in CO01 t code as A1234.1 for Order quantity 100.
Dear You are assigned the Batch number in production order, SO It won't allow other than That Batch Number during GR.
IF you want different batch for each GR then remove the Batch assignment in Production order -
Gr in more than one batch for 1 prd ord
Hi Gurus
I have a tipical problem. We have batch creation at the time of order release. Now some times due to some process error we recevie output with different characterstics so the whole output cannot be said as one batch. Is is possible now to do GR in 2 different batches.
Also this happens some time so i cannot go for batch creation at material movement as it will always create new batch.
Regards
Abhishek RaiAbhishek,
You can implement the user-exit EXIT_SAPLCOBT_001 under enhancement PPCO0001 where-in based on your requirement you can create multiple batches for your production order. We have used this user-exit at current client to create multiple header batches based on header material characteristics and store the information in a custom table to validate while doing GR.
You can use CALL FUNCTION 'VB_CREATE_BATCH' to create the batches as per your requirement having the characteristics value that you want.
Also make sure the automatic batch creation setting in Prodn Scheduling profile has been turned-off so that the batch is created only through the user-exit.
Please try and revert back.
Swapnil -
Manual entry of batches for finished product
Dear Guru's,
I want the manual entry of batches in the production order & automatic batches for raw materials. I have maintained the autoamtic batch number assignment as Inactive in T-code OMCZ. After maintaing this system is asking for manual entry for batches for raw materials also. I want the manual entry for production order & automatiic entry for raw materials.
I have changed the setting to " No automatic batch creation in production / process order" in production scheduling profile through T-code CORY. Assigned this production scheduling profile in work scheduling view. Even though I am facing the problem.
Hope it is clear. Need your inputs.
Regards
KalyanDear,
Kindly follow the path > logistic general > Batch management >Define Batch Creation for Goods Movements (here you can use function for creation of batch against movement type)
> logistic general > Batch management > Define Initial Creation of Data for Batch Master Transaction (Here you can use function for creation of batch against material type)
Kindly check and revert back.
thanks
Muhammad Ashfaq -
Multiple batches for a production order and mapping with components
Hello Gurus,
Our business requires to create multiple batches for one production order + they want to trace which component in the production order has been issued to the main equipment.
For example, I am creating production order for 'A' equipment for 4 qty. Business wants to create 4 different batches for these equipment
Lets say now 4 batches are created A001, A002, A003 and A004.
Now lets assume 2 nos of 'B' component are required for 1no of 'A' component. So the requirement of B component is 8.
Lets say 8 batches are generated B001, B002 ......B008
Now lets say batch B001 and B002 are issued for A001 and packed together. How do we map this?
I understand we can do some enhancement for creating the multiple batches but I still dont know how to map them with each other.
Please helpHi Ethan
There is a functionality called WIP batches, that allows you keep the batch traceability within an order.
With WIO batches you can track which batch of component was used to produce each batch of finished product.
See this link for more details:
Work-in-Process (WIP) Batch - SAP Library
BR
Caetano -
How to create a batch for a material, with batch characteristic input?
I am currently using BAPI_BATCH_CREATE to create batch for materials in my program. However, I find no way to input the batch characteristics. Is there any existing function module responsible for that? Thanks!
Hi,
You can use FMs 'CLVF_INSERT_AUSP' or 'CLVF_INSERT_AUSP' to insert or update characteristics for materials.
In the structure INS_AUSP or UPD_AUSP -
OBJEK corresponds to the material number,
ATINN is the characteristic name,
KLART is the class type which is '001' for materials, and
ATWRT is the characteristic value.
Populate values into the above fields for the batch of materials and call this FM.
Reward points if found useful...!
Cheers
Abhishek -
Create payment batches for credit memos
Hi,
I want to create payment batch to pay several credit memos.
When I issue "Select invoices" and "Build payments" processes, it does not select any of credit memos.
I try to add manually the credit memos on "Modify payment batch" window, but after selecting the first credit memo it displays the message:
"You cannot create a negative mount payment.".
Please help me how to create payment batches for credit memos.
Thank you.Hi Manish,
I am using 11i version.
Actually I followed the advices on this note, but still the same problem, the payment batch does not allow credit memos (as they are with negative amount), even when adding them manually.
Please help me to find where is the problem.
Thank you. -
Skip lot across multiple batches for same material
Hi,
I am looking for a way to control skip lots across multiple batches for the same material.
We need to do a quality check in production after a certain quantity produced (on a machine, for a material). My idea was to do skip lots (for GR) until we reach a threshold (say 10.000 pcs) and then do an inspection for the next GR for that material.
Any ideas how to set that up?
Thanks for any hint
AndreasHi mergler,
Ref to your query pls check this link Stock Posting for Skip Lots
Thanks in advance -
IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA
Hello All,
We use batch management for serialized materials only at our central plant. For all other plants, there is no batch control. Sometimes we need to return materials back to the central plant but with a different batch number.
When we do two step stock transfer 303 / 305, we receive the following error message if we don't use the original batch number.
"IO 229 - Batch for serial number 1234 (BBB) differs from document batch AAA".
However, when we use one step plant to plant stock transfer 301, there is no error message. The batch number is also updated correctly in IQ02.
I wonder if there is any configuration to use 303 / 305 with different batch numbers.
Thanks,
HakanThanks Arminda.
64044 recommends to use 309 to change the batch, which works but this is an additional step.
Currently 1 step plant to plant transfer i.e. 301 doesn't require this additional step. It updates the batch information with no problem.
Is there any configuration option to change the behavior of 305, so that we don't have to do an additional movement? -
Create batch for 531 movement in transaction COR6N
Hi,
I am using COR6n to record process order confirmations. As part of the usual 261 and 101 movements, I want to record a 531 (goods receipt of a bi-product). This is to record bi-product coming off the production line that can be used in other manufacturing processes. When I try tor record a 531 mvt in cor6n I am prompted for a batch number, the system does not create one automatically. Even if I go to the menupath Component -> Batch Management -> Create Batch I get the following error
Error when creating a new batch
Message no. GOODSMOVEMENT016
Diagnosis
When creating a new batch for material abcde in plant 123 an error
has arisen.
Procedure
You have the following options:
o Check automatic batch assignment.
o Check whether the material is currently locked.
o Check the batch number range.
I have maintained the necessary batch management customizing. Is there any way to create a batch number in cor6n for a 531 mvt?Dear,
in general it shall be possible for GR by-product.
Message GOODSMOVEMENT 016 appears under the following conditions when tyring to create a batch:
material_not_found
plant_not_found
stoloc_not_found
lock_on_material
lock_on_plant
lock_on_batch
lock_system_error
no_authority
illegal_batch_number
no_batch_handling
no_valuation_area
valuation_type_not_found
no_valuation_found
wrong_status
interval_not_found
number_range_not_extern
object_not_found
error_check_batch_number
no_external_number
no_customer_number
As you can see there are many possibilities. You may try to find the reason, at best together with an ABAPer, checking the sy-subrc when calling function module VB_CREATE_BATCH.
But from far away it is almost impossible to find out the reason.
Regards, Andreas -
Financial Reporting - Exporting Batch for Command Line Scheduling Issue
Financial Reporting 11.1.2.2
When I export, a successfully run scheduled batch, for command line scheduling the xml file that is exported only has the following information in it. I think that it is missing alot of information.
Any ideas what I am doing wrong, if anything?
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
<JOB_OBJECT OBJECT_ID="0">
<DATA_SOURCE_USER_CREDENTIALS DS_PASSWD="" DS_USER_NAME=""/>
<HR_USER_CREDENTIALS HR_PASSWD="" HR_USER_NAME=""/>
<OUTPUT_OPTIONS>
<HTML VALUE="No"/>
<MHTM VALUE="No"/>
<PDF EXPORT_PDF_FOLDER_LABEL="" VALUE="Yes"/>
<SAVE_AS_SNAPSHOT VALUE="No"/>
<PRINT VALUE="No"/>
</OUTPUT_OPTIONS>
</JOB_OBJECT>Hi again,
I am not sure if you can extract the formatting to Excel... I had also issues.
Can you please try to retrieve the report into Excel via Smartview? Check page 136 of http://docs.oracle.com/cd/E40248_01/epm.1112/smart_view_user.pdf
Regards,
Thanos -
Single batch for a component in production order goods issue
Hi,
We have a requirement where during good issue to a production order
through CO11 & MIGO, more than one batch of a particular component
should not be issued i.e. only one batch for a component should be used
for goods issue for a production order..If the stock for a particular
batch not full it should not allow the system to issue that batch. We
want an error message or any other restriction where system will not
allow more than one batch for a particular componet to a production
order.
Please advise how to design such scenario.
Regards,
ChandanHi Chandan,
Try with below steps,
- Create Batch Search procedure -
- Create Batch Determination Strategy for that Material (Create it for both COB1 and MBC1)
- Set NO. of Batch Split as 1 and don't tick Check box for Change Allowed
- Then go to Order type Dependent Paramter OPL8 - Assign your Batch Search Procedure and also tick Check Batch (This will check the auto check if Batch Determination is done manually and if you have violet the Batch Determination it will throw an error Massage)
Regards,
Dhaval -
Different batches for same product in one HU
Dear SAP Gurus:
I have a couple of questions:
1. Can you have multiple batches for the same product on one HU?
2. If the answer is YES, what do I need to do because right now when we try to scan the product ID which includes the batch the system does not saves the scanned batch on the HU but it leaves the one that the "Delivery Document" already had. We tried deleting the batch (leaving it blank) on the "Delivery Doc." but still it does not saves the scanned batch.
Thank You in advance for your help.Mario,
Be sure you can pack multiple batches in one HU in standard system. What's more, you can pack several different materials and HUs in one HU.
I'm not familiar with RF but you can check this link and you can also ask HU experts on LE forum:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/76/ea7c38b5e211d391cf0008c7d94f4b/frameset.htm
You can use this transaction to pick and pack material in one step. This can be useful, for example, if you need to pick several materials to be packed into one handling unit (HU). You can select an existing handling unit or create a new one. Identify the materials to be picked and packed by the delivery number.
Regards,
Csaba -
Create/Merge batch for HR payroll BCM (Bank Communication Management)
Hi All,
This with reference to BCM (Bank Communication Management) EHP4
How to create/Merge batch for HR payroll in BCM?
Thanks in advance for your support
Regards,
MSHi MS,
First go to t-code 'OBPM5 -'Reservation for cross payment run Payment media' and reserve a Prefix for HR payment runs.
Then in IMG maintain a rule for HR payment runs:
In IMG go to Financial Supply Chain Management > Bank Communication Management > Payment
Grouping > Rule Maintenance
Here if you want to select all HR payments into one merged payment run just select 'Merge ID' as the selection criteria. You can also include multiple rules to merge them separately. For example if you want to put all HR payments below USD10000.00 into one payment run and all others into another payment run then you can create two rules or one rule with two selection critera.
It is very flexible. If you want I can send a SAP's cofig guide.
Kalyan -
Dispay of aavailable batches for a material
Dear Friends,
I want to see the available batches for a specific material-plant/storage location combination.
Can anybody guide me how to find out the available batches for this combination.
Thanks & Regards
SatyaHi,
Try MD04 > it won't display batch but you can get information on availability. If you want to see stock level please check MB52, MMBE, MB5B.
Csaba
Edited by: Csaba Szommer on Jul 24, 2008 1:02 PM
Maybe you are looking for
-
I am having a problem burning a disc with ITunes. I get a message that I have to download the program again as there are some files that didn't download because of another disc burning program. I am sure this is true as I have Media Player and Nero o
-
BOOTMGR is missing in Windows Server 2008 R2
I have tried putting the dvd in and then running the recovery console via the command prompt. I only have the options for "system Image Recovery", "Windows Memory Diagnostic" and Command Prompt. I ran Bootrec /RebuildBcd, Bootrec /FixMbr and Bootrec
-
I need a copy of the receipt for my purchase
Hello, I need urgent a copy of the receipt for my purchase. I live in Brazil and I can not go to the store where purchased to get this receipt. Information that I have: - Date: 10/05/2014 - Product: GoPro 4 HERO Black - Price: U$544,36 - Store: 622
-
I got a new iMac and i want to move my website to my new computer. I made my website with iWeb. But i don't find the way to export into the iweb. Because when i satrt the iWeb it, give me the option to open a new site but i dont find the way to just
-
Item Prices in the oInventroyGenEntry DTW
Hello, I am trying to make an Entry with the DTW, In the DocumentLines template there is a field named "Price" , but this price is ignored when i import the document. Is it possible to set the prices via DTW? Thanks Jacobo