No buttons working when opening generated OpenXML workbook

Hi,
I've looked around for the answer to this, but have been unable to get anything, so probably looking in the wrong places.
I generate OpenXML worksheets as reports, and some may have stylesheets applied to match the source content defined, or contain charts.
Now the problem is that, while I get the XLSX file generated correctly with all content required, when opening the file in Excel, no menus or buttons are clickableat all - they are not disabled, they are just not clickable. This is the case whether or not
I apply a style sheet.
using OpenXML SDK 2.5, Excel 2010
thanks
francois

Hi,
sure, I'll upload a sample in the morning. Is it possible to upload xlsx files here themselves?
Pretty sure you haven't heard about this before because I might be missing something obvious.
When I open up the newly generated excel workbook, everything loads up fine. However, it seems as though the click events do not fire on any of the ribbon buttons or menus, as none of them fire at all. In fact, the only click event that does work is
to add a new sheet.
If I make a change to the sheet, then close it (red x), it asks to save. Re-opening that then is fine, everything working.
I generate the xlsx from scratch, but noticed the document app and core properties were missing, so I took the original I generated, and compared with the changed one (as above), and added the missing bits(docProps/app.xml and docProps/core.xml)
in my generation, but to no avail. Even if my newly generate file is the same as the working one, still doesn't work.
But strangely, when resizing the app seems to reset the handlers and everything is fine.
thanks

Similar Messages

Why Ctrl+Tab stops working when opening a flash embedded page?

This a huge pet peeve I have. Everytime I watch a video in youtube.com or megavideo.com, I can't just Ctrl+Tab to change tabs. I'll have to clic in some portion of the page without video to get it to work, but even that, isn't always the case.
- jtbandes
http://superuser.com/questions/12601/why-ctrltab-stops-working-when-opening-a-flash-embedded-page

There are other things that need your attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.1 r53
See:
*http://www.mozilla.com/plugincheck/
Update the Flash plugin to the latest version.
*https://support.mozilla.com/kb/Managing+the+Flash+plugin
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the Adobe Reader plugin to the latest version.
*https://support.mozilla.com/kb/Using+the+Adobe+Reader+plugin+with+Firefox
*http://kb.mozillazine.org/Adobe_Reader
*http://get.adobe.com/reader/otherversions/

Error message when opening a shared workbook with Excel 2007

Hello,
We would like to share a workbook outside BW (by saving into a serveur).Since we use Excel 2007, we can't anymore open this workbook.
We have a message error (see bellow).
For your information, it was ok with Excel 2003.
When whe save the workbook in local disk and then copy from local disk
to a serveur, it's ok.
We use SAPGUI 7.10 support package 8, patch 1 Revision 1443 & BI 7.0.
Best regards
Nicolas Triqnuand

hey Nicolas,
first of all, your error message is in French... not too many people out there will be able to understand. Eventhough I do understand French, it doesn't make much sense to me... BUT... in Excel2007 all macro's are by default disabled. When you enable them (you should get a "Security Warning" right under "the Ribbon"), your BI stuff should work again.
Just gave it a try, and it runs smoothly over here.
Cheers,
RafB

Oracle forms 6i designer has stopeed working when opening canvas?

forms 6i
Hi to all,
i have facing one problem when opening form canvas.i get the error message like this "oracle forms 6i designer has stopeed working".
any one help please
Regards,
Stevie

Hi
no os no db version not enough information ..!
Pls try to send adequate information Pls& look at the following thread this might help
connecting form 6i to oracle database 10G express edition
Amatu Allah

Works when opened in Acrobat 9 but not in IE ?

I'm trying to rewrite a plug-in that reads data from an external system using a COM component and it works just great when opened in Acrobat 9 pro, but when I open the pdf in Internet Explorer (on the same computer) I can see that the plugin is activated OK but all connections to the other system just doesn't return anything.
CoCreateInstanceEx returns OK as if everything is working as planned, no exceptions are thrown .. just nothing?!
Is Acrobat 9 pro somehow sandboxed when inside the IE window or is it because my plugin still isn't signed?
The old plug-in that I am rewriting works in both IE8 and IE6 but with Acrobat 4, so it isn't IE that is limiting the plug-in.
thanks
Ulrik

Yes I do write both debug and error messages to a log file.
I did further testing and found that it must be somewhere else the problem is because the object returned by CoCreateInstanceEx works just before the function returns.
What are the differences between running a plug-in in Acrobat 9 inside and outside IE? Like I have to get the AVDoc from a callback (AVDocDidOpen) function because AVAppGetActiveDoc() doesn't work in IE (external window)

I have just installed CS6 Master collection but indesign isn't working, when opening I get the message "Cannot load Assignment UI.InDesign because it requires Username. Please install the Username plugin and restart InDesign." not sure what to do next?

I have successfully installed the CS6 master collection and all the programs seem to be working apart from InDesign. When opening it I get the message "Cannot load Assignment UI.InDesign because it requires Username. Please install the Username plugin and restart InDesign.". I have no idea what to do next?

Many people use a font manager to organize a large collection of fonts, and sometimes these cause problems in ID. You might not realize that the font manager has installed a plugin in ID, but I think you would know if you added any other program extensions to help you work.
Can you show us a new crash report since the 8.0.2 update?
What happens if you start the Mac with the Shift key held down to prevent extensions from loading? What happens if you go to the System settings and create a new user, then restart the Mac and log in with the new user?

Video clips not working when opened through video ...

hello
Its been just a week that I brought my nokia e63 but it is giving me some problems
1. the video clips get stuck after some time, then it again pauses and plays it continues,,: when opened through video clips in gallery,, whereas it works fine when opened through real player or file manager
2. I can't sync my contacts through nokia Ovi suite it gives an error:80043bd3, it says u should consider updating your phone software, whereas the phone already has the latest software installed in it
I also have tried restoring my phone, but it didn't help. The software version is :500.21.009
plz help I'm really worried coz I can't bear these problems just after 1 week of its purchase
Moderator Note: IMEI/Serial Number removed. We kindly ask you not to share your phone's IMEI number publicly on this forum.
Lithin

I have the same problem also except the flash file has
disappeared from my computer. I have done a search and even tried
to use the run feature.

Error 97 when opening existing Excel workbook

I have a LabVIEW application that reads environmental data from two transmitters and writes the data to two sheets of an Excel workbook (this is done using ActiveX). I have run the application successfully on my computer and a laptop, both of which are running Windows XP and Office 2003. After installing the application on the computer that we want to use for the actual test, however, a problem was observed. If we attempt to open an existing Excel file (which is what we need to do), LabVIEW generates an error 97 message (null reference) and the program does not run. This computer is running Excel 2000. I checked the registry settings for Excel per a similar discussion and found no problems. Opening a new Excel file works fine. Thanks.

Hello,
A few things come to mind:
1. I wonder if the excel version matters here. Could it be that you have a different version of the activeX control on your target machine?
2. Posting a minimal, simplified version of your code may help as well... so we can see precisely where the error occurs. Maybe just the open operation and if relevant the ActiveX property node from which you are receiving the error - identifying precisely where the error originates will be helpful.
3. Here is another thread addressing the same error that may be helpful to you:
http://forums.ni.com/ni/board/message?board.id=170&message.id=172065
Give it a thorough read just to make sure you're not having a similar issue - if you are, you just may have the solution!
I hope this helps!
JLS
Best,
JLS
Sixclear

Error when opening a existing workbook

Hello,
I'm working with BI 3.5 and i'm having a error when i try to open a workbook.
The steps that i've made:
-create a new worksheet
-save as a new workbook
-open the workbook
A error message appears saying that no documents are in the archive.
In my user, i have a role with autorizations: S_GUI, S_BDS_DS and S_BDS_D.
Any idea?
Thanks and best regards
Maria

Hello,
I tried with another folder and the error still happens.
Thanks and best regards,
Maria

Write to Spreadsheet vi does not work when opened on my laptop.

Hello,
I have a very simple vi that collects data and writes to a spreadsheet. It works perfectly on my desktop computer but when I open with my laptop it does not write or give any indication that it's working.I know the vi is running but nothing happens. When I stop the vi it takes a moment to do anything and then at the top left corner it displays "Resetting Vi" and finally turns off.
Both computers have the same operating system and Labview edition.
I checked the vi properties and the labview options and both computers appear the same.
Any help would be greatly appreciated.
Thanks

I have no idea why your vis would do that, but I have developed LabVIEW to Excel vis that seem to work pretty well.
Why don't you try them and tell me how it goes?
There are 5 Sub VIs that interact with Excel and one example VI that shows one way they can be used. They're in a winzip self-extracting archive set to extract them into an 'Excel' folder on your desktop.
Use the example VI first. Type in the path of an existing workbook, or just 'Book1', the name of the sheet or just 'Sheet1',the excel cell address, and the corresponding desired cell value in the appropriate control and run the vi.
Start Excel opens and returns an automation reference to Excel. It sets the visibility of Excel to the specified Boolean state, sets the window state to Maximized,
Minimized, or Normal, and if there is no open workbook, it creates a new one.
Get List of Excel Workbooks accepts an Excel Automation Reference and returns an array of workbook names.
Set Cells in Excel Worksheet accepts an Excel Automation Number, a Workbook name, a Worksheet name, an array of Excel cell references (in A1 format), and an array of values corresponding to the cell references. After checking for the existance of the workbook and worksheet, it loops through the cell references with the 'Set Excel Cell to Value' VI.
The Set Excel Cell to value VI takes a OLE Excel Worksheet reference, a cell address and a value argument. It checks the cell address with the 'Check Excel Cell reference' VI, then sets the value of the excel cell to value.
The Check Excel Cell Reference VI checks the cell reference for validity. Cell columns may range from A to IV, and cell rows may extend from 1 to 65536. It converts A1 references to R1C1 references and returns a Boolean True if
the address is good.
Attachments:
excel.exe ‏162 KB

Print button moved when opening PDF in Firefox 26

I use Firefox with a company made website that allows me to create FedEx shipping labels. When I create the label, it opens in a pop up window as a pdf file. In Firefox 25 and previous versions, there was a button at the top that I could click for "print." This button now is placed on the right side in a drop down menu which has other options "go to first page" "go to last page" etc. Is there any way to get this button back separate from the others? It is not a huge deal but can be a pain when I create 100's of labels a day.
I also noticed when I open the file a different way that opens it in a new tab instead of a tab, it has the button separate. The only problem is, I have no way of forcing it to open in a tab the first time I make the label, I have to go back to it after it's created which takes even longer.
Anyone know how I can get it back to how it was? Worst case scenario I will reinstall 25.0.1 or just deal with it. Thanks in advance.

The toolbar changes depending on the size of the window. As the width of the window is reduced, some of the controls from the bar move onto the overflow drop-down. Can you enlarge the pop-up windows? You might be able to drag the lower right corner or, if Mac works like Windows, if you double-click the title bar of a pop-up window it would be maximized.
Some sites may code their pop-ups not to be resizable. There is a way to override this if you run into that problem. (Too detailed to describe if not relevant.)

N97 camera won't work when opening the lens/runnin...

I have the latest firmware v21 (jan 14 2010). This problem persists from firmware 1.0 (first firmware) and until now.
The problem is when I open (slide) the lens cover to take pictures, the camera application runs, displaying all the button/menus but in the middle where the scene should be displayed is black.
I can still adjust options such as flash, zoom in/out but its all dark, as if there's something covers the lens.
When I try to press the "Capture" button, either the hard one or the one on screen, it says "processing" and stay there forever.
This problem does not happen all the time, but rather 80% of the time. When I reboot the device, sometimes it works, sometimes it doesnt. I think it's most likely to be the sooftware problem.
Anyone got the same issue that you can't use the camera at all on your phone? Should I send it for warranty?
Thanks,
-Caten

You gotta send it back. I didn't have this problem I had another, BUT when I sent it back many, but not enough of the phone's "slow ups" were because of a faulty lens or something like that. RMA it asap.
Samsung Galaxy S4 'Black' (current)
My N9 Black (backup phone)
My N8 Green runnin Xeon^4 3.2.1
My E72 White
My E63 BLUE
http://www.youtube.com/Jeahavee
http://www.reverbnation.com/jeahavee
Stop with the popup notes Nokia sheesh I don't need help from you :/
I run Windows 7 Home Premium 64bit/Black Opal on my HP Dv6 1030us (DiViUs)
Windows 7 64 bit Pro and Black Opal on my custom desktop (Giniro)

.swf working when opened with Flash Player but not when opened with Mozilla

I'm having a problem with the .swf I created.
It works fine when I open it on my computer with Flash Player.
When I attempt to open it with Mozilla:
- it wont play or allow a button to navigate to Frame 3.
-it will allow another button to fullscreen the .swf and bring it back to small screen.
This also happens when Flash Professional creates the HTML. (Autoplay = true)
Is there some restrictions on AS3 when used on a webpage that don't apply when Flash Player is used independently?
I've been trawling through the forums without any luck
Any help would be very much appreciated
Thanks

Hey,
Yes there are some links but when using the right click menu to play the swf the links are there and working.
Thanks Ned for your intrest and attempt to help! It gave me courage to dig deeper.
After a rest and feeling less presure - I discovered the problem.
When in webpages you can't automatically Fullscreen - its fine if on a button though. I had to take out the line below
stage.displayState=StageDisplayState.FULL_SCREEN;
Cheers

Acrobat 8.1.2 Stops Working When Opening a Drop-Down Dialog Box

Whenever I try to open a drop-down dialog box in Acrobat the application stops working and Vista requests that the application be closed and that I will be notified of a solution when one is available. I've experienced the problem for six months. I must now solve this problem.
I've already tried repairing the Acrobat installation without any improvement. What should I do next?

Thanks, seems to solve some of the problem, perhaps I need to uncheck more in this dialogue box... May be 'a' correct answer but not the complete solution. Anyway if all I need to do is uncheck a choice in a dialogue box then it must be a bug or driver incompatability as there seems to be no reason why I shouldn't be able to use 2D graphics acceleration.
Works if you highlight several PDFs in File Manager and then right click and 'Open with Adobe Acrobat', the error still occurs if I drag these files into an open instance of Acrobat beyond two files. Also seems to be more of a problem if one of the files is a 'colour document ' or 'greyscale document' scanned by Acrobat itself.

Fscommand is not working when opening PDF document in browser with Acrobat 9, why?

We embedded a flash application in PDF using screen annotation. In the flash we use fscommand to call methods available in AcroJS. In acrobat reader 9, if we view the document in Internet Explorer, we receive a security sandbox violation message saying that it cannot make fscommand calls to <unknown> (allowScriptAccess is ). But when we open the document in Firefox, it works fine.

Have a read of this article on the web:
http://www.actionscript.org/resources/articles/99/1/FS-Command-JavaScript-Library/Page1.ht ml
The part that caught my eye was the following:
"...These methods will not work with Internet Explorer on Macs. This lack of functionality is a brower issue with communication with plugins and cannot be resolved by anyone except MicroSoft. "
I wonder if the same is true for Windows?
Sabian

No buttons working when opening generated OpenXML workbook

Similar Messages

Maybe you are looking for