No catalog profile has been maintained for notification category

Hello
I have created the Catalog Profile with catalog code groups and assigned the codes..The profile have been maintained in technical object masters .No catalog profile is maintained for any notification type. Now when I am creating a notification M1 it says "No catalog profile has been maintained for notification category M1"...It copies the catalog profiel of the technical object after I maintain the technical object in Notification .
I want to avoid this info message..How  do I avoid this message for the notifications without catalog profile...
The message details are:
No catalog profile has been maintained for notification category Z1
Message no. IM005
Procedure
Please maintain the corresponding entries for the catalog profile and allocate this catalog profile to the notification type.

Hi Shaikh,
This message can not be skipped with any SPRO settings because this message
Viz.: < ELSE.
    CLEAR E_RIWO02.
    MESSAGE I005 WITH I_TQ80-QMART RAISING  INITIAL_REPORT_CAT.
  ENDIF.> 
is hard coded in program LIWO2U05.
If at all you want to bypass this message then you need to change the above mentioned program for bypassing the message.
Sundar

Similar Messages

  • No country information has been maintained for IQ

    Hi Guys
    We have recently enabled the Embargo service , now when the Purchase Order is being created its getting blocked in embargo for the entirely wrong reason.
    When checking the Customs document log in GTS i see that its blocked in embargo because of the below message
    There is no partial embargo for country pair "IQ"-"US"
    No country information has been maintained for IQ
    What setting am i missing here?
    Regards
    Carl

    Hi Carl,
    Please check the following thread, you will found the answer there:
    Message for Embargo "No country information has been maintained for US" 
    Re: Message for Embargo "No country information has been maintained for US"
    Regards.
    Mouaz

  • Message for Embargo "No country information has been maintained for US"

    Hi
    I have activated the legal Regulation EMBUN for country DE and US where country of departure is DE and US is country of destination. Entry in Emb. Exp. is 2Check : Export (exclusively) for both DE ans US.
    In the Log it shows aEmbargo block and the reason it states is "No country information has been maintained for US" for the BP.
    Is the Log showing the correct information?
    My objective is to have Embargo block for export from DE to US.
    Your help is appreciated.
    Regards,
    Shailesh

    Hi,
    First of all the determination of the Legal Regulation is at country level, so in the Customizing you should only put the Country departing from to activate the legal regulation (the send to is not being considered in the activation of the Legal regluation unless you change the determination strategy -which I do not recommend-).
    Then go to transaction /SAPSLL/CNTRY and give the information for ALLcountries as not relevant for Embargo, except for the US (its a lot of manual work, but I think there might be an oss note to do this automatically).
    Then go to transaction /SAPSLL/CEEMB and give departure Country DE and execute. in the next screen create new and enter US. then transfer the data and mark it as embargo.
    Then ur all set,
    Cheers,
    Marc

  • No country information has been maintained for US - Message no. /SAPSLL/CON

    Hi
    I have activated the legal Regulation EMBUN for country DE and US where country of departure is DE and US is country of destination. Entry in Emb. Exp. is 2Check : Export (exclusively) for both DE ans US.
    In the Log it shows aEmbargo block and the reason it states is "No country information has been maintained for US" for the BP.
    Is the Log showing the correct information?
    My objective is to have Embargo block for export from DE to US.
    Your help is appreciated.
    Regards,
    Shailesh

    .

  • Embaargo Error :No country information has been maintained for USA

    Hi Gurus,
    I hava a PO in which the supplier is internal , with in USA. However my PO is blocked in GTS , In the log I see the message "No country information has been maintained for USA".Why should it block an internal (with in US) supplier in EMBAGO check.
    Please advice. Whats is wrong and what I need to do.
    Regards

    Hello,
    Usually when there is an Embargo with the messge "No country information has been maintained for XX" , this is usually an issue with the check date not getting sent to GTS from the feeder side.You will probably see in the log that  No relevant check date could be determined for the item
    There is a SAP note 848050 (although it mentions License the solution is also valid for Embargo) .
    Basically GTS needs a reference point in time at the item level to perform the embargo (and license determination) checks.
    That time stamp is provided from the feeder system via the schedule line (for Sales Orders and deliveries).
    The standard logic for the relevant check date for Embargo is as follows:
    1) first check if a confirmed schedule line is available for the sales order line item.
    2) if no schedule line is available requested delivery date(VBAK-VDATU) of the sales order is used.
    To include this data for documents of such types which do not have a relevant definitive date please use the User Exit SLL_LEG_CDPIR3_002 in R/3. Implement the mapping of a suitable date into the internal table CS_API6800-ITEM-DAT in the user exit SLL_LEG_CDPIR3_002 in R/3 to fill the date structure on item level. This internal table should be filled with the following data for each item:
    ITEM_NUMBER   = (item number)
    TYPE_OF_DATE  = CHECK                           > this is a constant
    REL_POINT_IN_TIME_TS = (suitable date for check)
    If you do not want to use the SLL_LEG_CDPIR3_002 user exit you can fill the REL_POINT_IN_TIME_TS field (relevant document date)in the ITEM-DAT table of the GS_API6800 API structure.
    Once the time stamp is provided, the system should be able to find the country and the embargo wont occur.
    Hope this information helps you,
    Kind Regards
    Ann Marie

  • Help!! My Profile Has Been Deleted for the 3rd Time!

    Can anyone help me with this. I just tried to login to discussions, with the same password I have been using for the last year (since the last time this same problem happened to me), and when I tried to login, a popup showed saying "invalid password". I use Safari and Firefox to save the id and password, so I know it is enter properly.
    OK. Fine. So I had the reset password sent to my dot mac account. However, when I login in with the reset password, I am immediately sent to the default, first sign up page! What!!!! I have been using my dot mac id for 7 years as my login!
    So, I enter in the same alias that I have always used, and I am promptly told that it is already taken!!!???
    The last time this happened I had to go through the same process and I lost all my Level points - when from several hundred to Zero, which has happened again!
    Can some tell what happened and how I can get my profile and alias back?
    I looked up my previous alias and it is still there:
    http://discussions.apple.com/profile.jspa?userID=306818
    Thanks
    Gary Sumlak (really)

    4181
    Hello Gary,
    Your profile (userID=306818) is not deleted, and be sure there is a way to eventually go on with it.
    Here's what I would try:
    - First, delete your cookies in both Safari and Firefox (in Preferences>Security or Preferences>Privacy), so you make sure to start fresh with no possible interference at all on you browsers' side.
    - Then go to "My Contact Info" again, and enter your complete ID as it has always been from the beginning
    (should be something like [email protected] ?)
    - Now that everything is straight, the only possible problem left is the password:
    Try the very first, old password.
    If it doesn't work, try the new password I understand you tried to change afterwards.
    In any case: do not use autofill; type IDs and passwords yourself this time.
    You'll be able to leave it to autofill in the future when the problem will be fixed.
    Good luck!
    Axl

  • No country information has been maintained for US

    We have run into an issue of an older delivery going on Embargo block for a domestic order, shipping within the US.
    Here is what we have in place for the US.
    Do I need to make a configuration change to prevent domestic orders from going on Embargo block?  I dont think any changes have been made to this configuration since we implemented in 2007.
    Thank you, Alison

    Hi Alison,
    1) Firstly the reason for block is something different. If you check the document check log clearly, system couldn't find a valid date to be considered for performing Embargo check.
    So, please check if there is a delivery date available in the Sales order. If there is no delivery date in Sales order, system cannot determine if embargo for a particular country is valid for that delivery date.
    Please check and maintain delivery date. This should solve the issue.
    2) As you pointed out, yes it is not necessary to have embargo check activated for domestic scenarios. You may remove it after checking why this was setup to check for domestic scenarios. Just wanted to make sure if there was a valid business case to set this up for domestic as well.
    Regards
    Dhilipan

  • Problem of setting Priority type for notification category

    Dear Expert,
    I have created a new notification type and number range have been created for that notification. Actuaaly i am facing problem when i craete notification for that type which is I have created then after entering in IW2, show error message "Priority type not maintained for notification category".
    I also want "Field displaying user status" and "Control box" for My notification of showing fields.
    Please suggest me how solve this error and field displaying.
    Thanks & Regards,
    Deepak

    Hi,
    In addition to above response, also customize the following:
    Define Action Box -> Define Follow-Up Functions
    Notification Types ->Activities ->Dependent Follow-Up Functions ->Define Follow-Up Actions for Tasks-> Define follow-up actions
    Follow-up actions -> Function modules.
    Regards,
    Lucky

  • No quality notification type has been defined for inspection type 89

    Hi
    When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
    I want to know where do I configure it??
    Regards
    Suresh

    Hi
    Path for assigning the Qualtiy notification type to Qualtiy  inspection type:
    SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
    Maintain Inspection types.
    Select the inspection type and goto details screen
    You can find notification type field in the details.Give the value and Save.
    Regards
    Ramakrishna

  • Output type config error:No communication data has been defined for transmi

    Hi Gurus,
    i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
      green Object 0000000133                                        
      green Output type: UK Sales Order                              
      green  Processing log for program RSNASTED routine ALE_PROCESSING
       RED   No partner profiles (message control) maintained         
    I tried adding communication data in VV11 but i get the below error.
    No communication data has been defined for transmission medium A
    Message no. VK603.
    I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
    V1 ZORD SD10 values.
    Please suggest me to correct these errors. Your help is much appreciated.Thanks.
    Regards.
    Sanjeev

    Hi V V Reddy,
    Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
    So i deleted all the partner profiles and created and generated them agian.
    I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
    Thank you very much.
    Regards,
    Sanjeev

  • This Apple ID has been disabled for security reasons

    When I try to log in to my iTunes store account i get the following message:
    *This Apple ID has been disabled for security reasons*
    I've waited a while and tried again (as in a week or longer), and the account is still disabled.
    Can anyone tell me how to get the ID enabled again, since as of now I'm unable to buy / download any content from the store. Which makes my iPhone a sad phone
    My assumption is the problem is i have a rather desirable account name: i am constantly receiving notifications of failed logins to my account, presumably by scripts trying to hack it. But i have a secure password, so no problem. But perhaps this has led to the account being deactivated?
    Any help / or reactivating the account would be great.

    Contact customer support: http://www.apple.com/support/itunes/contact.html?form=account&topic=iTunes%20Sto re%20Account%20and%20Billing&subtopic=Billing%20Inquiries

  • My iPad has been syncing for 18   hours since I am trying to do the iCloud thing.  What happens if I stop the back up process? Getting tired of waiting for it to get done.  Could this be caused by the fact that I have 5gb of photos on the iPad ?

    My  iPad has been syncing for 18 hours / back up process since I tried to work with the iCloud.  Some items ie., contacts are synced to my new iPhone 4si and also books from the app store and also kindle stuff is okay.  No photos yet.  iPad has 5 gb of photos on it.  What happens if I stop the back up/sync process before it completes? Does it mess up my iPad??? Thanks

    Delete your old Firefox Profile and create new one
    *http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    Backup and Restore your profile data's
    *https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
    *http://kb.mozillazine.org/Profile_backup

  • Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down.  The window will not close ever, just keeps spinning around...help!

    How can I stop the 'Adobe Reader Update' from constantly trying to download?  It's been over a week now, preventing me from signing out of my computer and other issues too. Can you help please? thanks!

    Hi! The version is OS X 10 8 5...not sure what that means lol but it makes a difference obviously! 
    I did what  you said now and it has worked, thanks so very much for getting back to me.  I really appreciate your help!!
    Can I ask you questions in the future or do I just do that through the forum?\
    Thanks again, Jennie 
          From: Anubha Goel <[email protected]>
    To: rubyrose1950 <[email protected]>
    Sent: Sunday, April 26, 2015 10:42 PM
    Subject: You have been mentioned by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community
    |
    You have been mentioned
    by Anubha Goel in Re: Adobe Reader Updater has been 'downloading' for over a week now...it is preventing me from signing out and closing my mini Mac, can't close down. The window will not close ever, just keeps spinning around...help! in Adobe Community - View Anubha Goel's reference to you  Hey rubyrose1950, Could you please let me know what version of OS are you working on.You might try uninstalling Reader and install it again from the below mentioned link:Adobe Acrobat Reader DC Install for all versions Let me know how it goes. Regards,Anubha 
    Participate in the conversation by replying to this email
    To stop receiving these messages whenever you are mentioned, go to your preferences and disable notifications for direct social actions. |

  • No output has been selected for printing in Proforma Invoice

    Hi,
    I have created PO for STO and delivery (Delivery Type NL) through billing VF01, billing type (JEX) and creation of excise invoice, T-code u2013 J1IIN with reference to Proforma Invoice, it is working fine. 
    I have maintained the billing output (JEX) in condition records (T-Code- VV31).  When I have save the proforma invoice and selected the issues output system showing Error u201CNo output has been selected for printingu201D Message no. VF302"
    Can any body tell me what is problem for configuration steps or I have missing any steps?
    Useful answers duly rewarded
    Regards,
    Devendra

    Hi Devendra
    check the following things :
    Go to VF02 ->header data ->output-> click on analysis
    Check the access sequence (key combination) in your output type details.t.code V/40.
    check wheather the output procedure has been assigned to the output type or not
    check the condition record has been maintained or not VV31 . If maintained check the key combinations entered, transmission medium also .
    Regards
    Srinath

  • No Output has been selected for priniting

    Hi,
    While tryig to issue output (RD00) to Printer/Screen, we getting the error No Output has been selected for priniting.
    Please advise where to maintain this?
    Regards,
    Edited by: STUDENT on Oct 2, 2008 7:20 PM

    Hi friend
    As  it is billing then it is RD00. as per your query , once you create billing go to header data-> output and give manually output RD00 and then give  the communication method as LP01.and once you save the billing document.go to menu->  output -> issue output to screen .
    Regards
    Srinath

Maybe you are looking for