No choice of sound output with lightning HDMI adapter connected.

When the lightning HDMI adapter is plugged in, sound is piped through HDMI but I want the option to have the sound come through the iPad speaker, because the mini projector I use has only a 1 Watt speaker built-in, and the iPad sound is louder. Anyone figure out how to choose speaker output?

I don't believe that is possible.
Does the projector have an audio output jack to connect powered speakers?

Similar Messages

Problem with lightning hdmi adapter

I Just got a new lightning digital av adapter To connect my iphone 6 plus to my tv. Initially it was working great, then I received a phone call.. Since then nothing. The little blue bar comes up on the top of my iphone screen for a few seconds, then it goes away. If I try watching any video, it displays only on my phone screen. Tried connecting to my ipad mini, and it worked just fine. I'm sure there's a simple solution but I'm stumped. Help would be much appreciated.

I don't believe that is possible.
Does the projector have an audio output jack to connect powered speakers?

Lightning HDMI Adapter not working with iOS 6.1.2

I have an iPhone 5 which was updated from 6.0.2 to 6.1.2 recently and the Lightning HDMI adapter stopped working altogether for video mirroring; was wondering if anyone has the same situation/any solution for this?
I also have an iPad retina generation which is at 6.1.2, and the Lightning HDMI adapter is not working for it as well.
I've tried replacing HDMI cables, rebooting the iPhone with the cable plugged in, and plugging out/in several times with the charger in/out. The adapter works, cause when I plug it in; I see the top bar flash for a bit... but no dice on the video mirroring to my TV.

I also have this problem and am very unhappy with the way Apple is handling it. Called today to enquire on when the fix will be available and was told it is a software issue that could be fixed if we paid $35.00 to talked through process on the phone. Highly disappointed with Apple, why should it cost me money for them to fix there own issue. Since they are aware of the issue the least they can do it posted the information for the fix online @ no charge.
If I wanted crap service I could have gotten a phone from anyone. Reconsidering purchasing a 5 on next upgrade.

What adapter do i need to be able to use my ipod classic with a new sound bar with lightning adapter?

I have an ipod classic pre-2009. what adapter do I need to be able to use it with a new sound bar with lightning adapter?

Probably something like this:
http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter?fnode=3c
I have 3 of them scattered around the house for using my old 30 pin stuff with my new iPhone 5s....
Is that what you are looking for?
GB

Hello, I am interested in buying this week of a mac mini 2011 with intel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster933HD monitor. How would it look better with the hdmi-dvi connection or a built-in display adapter port-vga

Hello, I am interested in buying this week of a mac mini 2011 withintel graphics HD3000 but I'm not sure it looks good with my Samsung SyncMaster 933HD monitor. How would it look better.... with the hdmi-dvi connection built in, buying a HDMI 1.3 cable and HDMI-making or buying an adapter hdmi display port - vga and connected through the port thunderbolt
Thanks

I originally set up my mini with the included HDMI -> DVI adaptor to connect to a Sycmaster monitor. The graphics were very good.

Lightning HDMI adapter no sound

With iOS 8.2 the sound still plays out of my ipad speakers when I use the apple lightning hdmi connector. The video works correctly with no issue. I have tried 2 different adapters with the same result. My iPhone 6 running 8.2 works correctly with the adapter.
Anyone having the same issue?

I had a similar problem and had to laugh when I figured out what was wrong. I untangled the cords! Seriously.

No Sound Output with Digital Output Mac

Hi There,
I normally use my Blackmagic card for sound output on my Mac with Premiere CS6. I want to work with the digital output on my current project but when I try switching to digital out under Preferences>Audio Hardware the audio still comes out of the Blackmagic card but not the digital audio out on the Mac. I'm testing with the bars and tone in the browser and my timeline sequence. FCP 7 works as expected when digital out is selected, and I know digital out is working properly on my computer.
Any suggestions?
Thanks!
Gerry

OK, sorry it was that I had to switch audio device under plackback.
Perhaps this should be added to the FAQ under No Sound During Playback, which doesn't include the Preferences>Playback as part of the troubleshooting for MAC.
Thanks!
Gerry

How to get Composite video output with Lightning devices?

I am replacing my last 30-pin device this week, and now all of our devices are Lightning cords. I have the Apple Composite AV cables in my vehicles, but Apple does not offer a Lightning version of them. From what I read on the 30-pin to Lightning adapters, they do power and audio only at best, and so don't support video. So, does anyone either know of a lightning AV adapter (with composite out), or a 30-to-8 pin adapter that will work with the above cables?
Thanks.

I should add, I saw this (http://store.apple.com/us/product/MD824ZM/A/lightning-to-30-pin-adapter-02-m?fno de=3c) but reviews said they had issues with video. Does anyone know if that works with video?

Sound output with sound and vibration toolkit

Hi!
Wants to setup a system with two microphones that are connected to DAQ NI USB-9162 and perform a Frequency Response between them where one of them has the undisturbed signal (close in space) and the other the respons (further away). My problem is that I want to send out noise or multitone through labview to an amplifier with internal D/A connected to my USB (turns up as a soundcard in windows). I can not find this option to send out sound in the sound and vibration tool.
Using evaluation version of both Labview and the sound and vibration kit since I wanted to see if it was possible to perform this application with Labview. Feels close but lack the success still.
Best regards
Fredrik

Fredrik76 wrote:
Ok so I have to use the Labview interface instead of the sound and vibration toolkits interface? I see the sound out option in Labview where my card apperas but not in the sound and vibration toolkits interface. Guess I have to add the options for the analysis manually then?
It should be easy to do some modifications if you have some code doing what you want, but not with a sound card. If you have some code just post it. So I can take a look. Note that sound cards do not support all sample rates. But all sound card do support 44100 Hz as sample rate. And newer sound card also higher rates. And how good your setup will be. Will depend somehow on your sound card. But by all means give it a try
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Will my W2072a monitor sound work with VGA to VGA connection?

HP guy said I need DVI to get sound. I used HDMI from PC to DVI on Monitor and still no sound No where in documentation does itr say VGA to VGA won't work for sound! Tried most everything in forums Sound vard ok as external speakers work fine. HELP!!!!

vga is a simple video signal, also most dvi will not support audio.
Some graphics card seems to support this now, see:
http://en.wikipedia.org/wiki/Digital_Visual_Interface#DVI_and_HDMI_compatibility
Normally you have to use a hdmi graphics card or a monitor which can be connected to the audio output of the pc.
HTH
V.
*** Say 'Thanks' with Kudos ***

No sound over HDMI, picture works fine but in sound manager tells me HDMI not connected

Hi There
I have a tm2 1050ez and am experiencing problems with my HDMI port.
When I connect it the display automatically gets duplicated and everything works fine, but when I try to play a movie with vlc for example I do not get any sound through the TV, only on the tablet.
Of course I went into the sound manager because I suspected that you must tell the tm2 where to play the sound, but to my surpise it said that the HDMI cable was not connected?
I therefore could not make any changes to the default output device...
Even in the IDT application wants to tell me that the HDMI cable is not connected. I have plugged and unplugged it several times to no avail.
I hope someone can help me on the above, I already searched the net for several hours but havn't seen a similar problem, with the most problems it does show the cable as conneted..
Thanks in advance!
Geen
This question was solved.
View Solution.

I have same issue as reported by another board member.
I've HP DV4t 1300 laptop with Vista 64bit with service pack 2. I upgraded all drivers and everything is upto date.
On awaking from sleep/hibernation AUDIO is screwed up on LCD connected via HDMI. No matter what I do if I make my computer sleep/hibernate and then connect LCD I'm unable to get audio working.
Help from technician will be appreciated. Technician can reporduce issue as I mentioned.
Thanks,

Ipod 4th gen had no picture with AV hdmi adapter

I've got the apple 30pin to hdmi adapter, and it works great on the iphone 4/4s and ipad2 to the TV.
When I connect it to our daughter's ipod (4th gen) there is sound with no picture on the TV. The ipod recognises the adapter as it appeas the the setting/about and is identified as an apple AV adapter.
Is there a setting somewhere that's needed to get the hdmi video out enabled? The same ipod works fine on a small bedroom tv with built in docking station for videos.

No app yet, the other devices show the main menu or home screen with all the icons, even the slide to unlock appears on the TV, or games have exactly the same as the touchscreen shows.
The ipad2 is still ios5, the iphone4s is ios6.
I've also tried another ipod touch 4th gen, doesn't work with ios5 or ios6 on two different ipods.

I have always been able to connect my Ipad to the tv with the HDMI adapter but since most recent software update it does not work. Is it me or has others expeirenced this?

I have tried to stream movies and live TV using my HDMI adapter and cable . I have always had it work but with the most recent update it no longer will connect. I hope someone has a good solution.

It still works for me.
Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after It shuts down, press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

Hey Guys, from Germany. I want to connect my iMac 21" with my Tv just for fun. Does anyone know, how it works. With a Hdmi adapter?

Hey guys! I want to connect my Imac 21 " with my Tv just for fun. Does anyone know , how it works?

Selecting the correct adapter and cable depends on which year model iMac you have and what inputs the TV has?
Check the User's Guide that came with your iMac or your Spec's at > Apple - Support - Technical Specifications
to see if your iMac has a Mini-DVI or Mini DisplayPort and then select that adapter with the correct connection for the TV.
Example: if you have a 2010 or 2011 iMac and an HDMI ready TV, then you would want the > Moshi Mini DP to HDMI Adapter with Audio Support - Apple Store (U.S.)

No sound through mini DVI-HDMI adapter.

I've never had a problem hooking my Macbook Air up to my TV through the HDMI cable before. I believe the change happened after updating to 10.8.2, but I can't be sure. When I plug in the adapter, the picture goes through to the TV (just as before), and in the Sound settings panel it has the option for playing through the TV (just as before), but no sound. Using the same adapter on a Macbook Pro running 10.7 - no problems.
Thanks for any help or tips in advance.

You already tried most of the steps to get this working, but I do suspect the ATI/AMD driver has somehow been corrupted.
You already tried the AMD drivers from HP's site, so I would give the drivers directly from AMD. Worst case scenario is it doesn't resolve the issue. The linked driver is what was returned when selecting the options for the notebook on AMD's driver page. Notebook>Radeon HD>Mobility Radeon HD 4XXX Series>Windows 7 64bit.
Let me know what happens.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

No choice of sound output with lightning HDMI adapter connected.

Similar Messages

Maybe you are looking for