Currency Decimal Increases Incoming Payment Window

Hi Expert,
My problem is related to Incoming Payment window (named Doc. Currency ) can I increase the decimal(Last Digit 3,4) in that Field.Actually I check the Seting in Administration Module but Digit not increase.
Please help me out from these problems.
Regards
Amol

Hi Gordon,
So i cannot increase the Decimal in Doc Currency field.Because the USD Currency amt For Eg :49.23321 so it round the decimal so amount calculate in Amount Due (LC) give differences in INR valuea and that field is Disabled.Otherwise i can input the value in that Amount Due (LC) Field.So suggest solution in these problem.
Thanks & Regards
Amol

Similar Messages

Need CardCode Column in Incoming Payments window

Hi! Im trying to add a CardCode column to the matrix in the Incoming Payments window, Ive tried the following;
- Added the User Defined Field U_Cod_Cte to the incoming payments lines
- Added a format search but it takes 25 minutes with 1000+ plus lines.
- Added a User Data Source but when trying to set the data in the matrix with the SetDataLine I get an exception with the message "Item is not user defined"
- Tried to set the value of the column iterating through all matrix rows casting the special field to an edit control ((SAPbouiCOM.EditText)_oMatrix.Columns.Item("U_Cod_Cte").Cells(i).Special),Vaue = "cardcodevalue" but it takes almost as long as the format search.
Please help!!!
Thank you very much.
Jose.
Edited by: Jose Ines Cantu Arrambide on Jan 31, 2010 3:20 AM

Hi Mohamed, I tried your suggestion, here is what Ive got,
SAPbouiCOM.Matrix _oMatrix = (SAPbouiCOM.Matrix)m_oPaymentForm.Items.Item("20").Specific;
            SAPbouiCOM.DBDataSource _oDS = m_oPaymentForm.DataSources.DBDataSources.Item("RCT2");
            for (int i = 0; i < m_oPaymentForm.DataSources.DBDataSources.Item("RCT2").Size;i++)
                try
                    _oDS.SetValue("U_Cod_Cte", i+1, i.ToString());
                catch (Exception err)
                    System.Diagnostics.Debug.Write(err.Message);
Im running this code when I click a button that I added to the form. "U_Cod_Cte" si the user field that I added, its an Alfanumeric of lenght = 10.
Im trying to test it just by setting the iteration number. The thing is that Im seeing a Size = 1 no matter how much rows I have. And also when I try to set the value, I get an exception "The item is not a user defined iitem".
Thank you for your help!
Jose.

Multi Currency in One Incoming Payment

Hi Dear;
in sbo we can't create incoming payment with more than one currency in the ssame incoiming payment.
i think it's better to have it.
thank you Dear;

Though the SBO system has an option of allowing incoming payment in multi-currency. The suitation you're talking is very rare and SBO has no answer for it, has will affect your cash flow statement.
As all such things are discussed rite in the very beginnig i.e. even before execution of work, the user should post invoices accordingly.
Assign points if useful.
Thanks,
Srikanth

Increase Incoming Payments in SAP FI

Hi guys, is there a SAP Module that allows you to process/calculate increasing payments? Please Help

Hi I am working on a new assignements analysing information from SAP, specifically PAYMENTS information and I have doubts about some basic things that perhaps some one could help me with:
I need to know what SR document Type is..
I also need to know if document type KZ and SR are associated to payments.
on the other hand I need to know if VENDOR PAYMENT is a payment done TO the vendor from the company I am analysing.
thank you very much and hope someone can help me
regards

Diffrent Currency in AR Invoice and Incoming Payments

Dear Experts,
I have an situation here where the AR invoice reads one currency but the incoming payments read a different one. What could be causing this ?

Hi,
Please clarify what you mean read here in your posting.
Thanks,
Gordon

Background Journal entry for Incoming payment

Dear Experts,
Would you please help me in how to get the journal entry for an incoming payment entered as "payment on account".
The relationship map does not show this, but I can see the credit entry for the customer is passed.
same happens for incoming payment made for specific AR invoices.
SAP Doc says...
Result
An incoming payment document is created.
A journal entry that credits the customer and the tax accounts (if tax is involved), and debits the receivable account, is created.
The journal entries of the incoming payments and the paid invoices are reconciled.
The paid invoices are closed; they no longer appear in the Open Items list and in the Incoming Paymentswindow as documents for payment.
So how to check the journal entries for incoming payments.
Regards
Message was edited by: Suman Roy

Hi,
To see journal entry, drill down arrow at transaction no of incoming payment window.
Thanks & Regards,
Nagarajan

Incoming payment linked to invoices not reconciling

1 incoming payment of $900 dated 1.8.08 has been linked to 3 AR invoices (dated in July), in the incoming payment window.
The 3 invoices have been pauid in full (NO part payment where made).
When running the customer aging report dated 16.9.08, the incoming payment receipt of $900 appears, but the 3 invoices appear to have been reconciled.
Why could this be occuring? How can I reconcile the invoices against the payment correctly?

Hi,
Please check for the Business Partner, for whom the Invoice were raised, the following :
1) Goto the Banking Module > Bank Reconciliation and Statements and Manage Previous Reconciliation
2) Enter the Business Partner and check the reconciliations.
When you highlight the row the details of the reconciliation are shown in bottom half of the window.
If you find the Invoices and the Payments, the same are reconciled.
However, there can be a chance that there is/are Credit Memo raised for the Invoices which are paid by that Incoming Payment and you need to Manually reconcile the transactions together,
Please confirm about the Credit Memos for the Invoices linked in that Payment.
Hope it helps.
Regards,
Jitin

Incoming Payment Discount

Greetings Gurus...
I need to generate a report to show the incoming payment discount taken during cash application to customers. For example, a customer has an invoice for $100, they pay only $99, the AR clerk puts $1 discount in the Incoming Payments window on SAP B1.
What table holds that $1???
How can I write SQL to show the $100, $1, and $99...
Thanks - Zal

Thank Gordon - that is exactly what I needed.
Now that I know there are more than one sub-table, next time I am just going to go down the list of XXX1, XXX2, XXX3 until I find it...
Take Care - Zal

Customer Vendor Ref. No. in Incoming Payment

B1 8.8 PL14 and PL18
Are we able to include the Customer Vendor Reference Number in the Incoming Payment?
1. Open Incoming Payment
2. Select Form Settings
3. Cust./Vendor Ref No is selected as Visible but the Incoming Payment window does not display the Cust./Vendor Ref. No.
I then Deselect Cust./Vendor Ref No in the form settings and Click OK. Then I open the Form Settings window and the Cust./Vendor Ref No. is still set as visible.
What am I missing?

This is what I did and is seams to be working.
1. Tools -> Customization Tools -> User Defined Field - Management
2. Expand Payments
3. Click Paid Documents
4. Click Add Button
5. Create a query to auto-populate the field
SELECT T0.[NumAtCard] AS 'BP Reference No.' FROM [dbo].[OINV] T0 WHERE T0.[DocNum] = $[$20.1.0]
6. Save the Query
7. Open the Incoming Payment window
8. Place cursor in the new field and select Tools -> Customization Tools -> User-Defined Values - Setup
9. Select Search in Existing User-Defined Values according to Saved Query
10. Select the Saved Query
11. Select Auto Refresh
12. Select When Field Changes
13. Select Customer/Vendor Code

Incoming Payment::Charges deduction issue

While incoming payments entry some times there are charges which are deducted by the customers. (RTGS transfer charges, Postal charges etc. ).
How to make remarks for these charges in the incoming payment screen itself?
For Ex:
      Total Customer Due amount 10000.Rs
      He deducted                        200 Rs for transfer charge
      So he pass the check only for 9800 Rs.
       If am entering 9800 Rs in check payment screen it shows balance due Rs 200
So i dont want to display this balance due Rs 200. i need to close this balance due
i need remarks entry for 200 Rs (Reason for deduction) on payment mean screen
Any possibilities for this
Help me out

Vijay,
There are a few ways to handle this.
1. Create a Service type Credit Memo for 200.00 on the Customer and in the description enter the details for the deduction and select the appropriate G/L account.
On the Incoming Payments window..select the Invoice and Credit Memo and complete the transaction.
2. As mentioned earlier...Internal reconciliation and create a balancing JE

Location field in Incoming Payment

Hi All,
My client requirement is that they want to have Location in the Incoming payment window but in that its not possible to get that. I can map that through UDF but this does not solve my problem as through UDF i can give it for storing the information as far as reporting i concerned i cant get it. So please help me out. Thanks is advance.
With best regards,
Murtuza Ahmed.

Hi
Can you please explain what does location field mean and where it is defined . Location is usually used in Item master data as UDF to work as a bin location .I don't think so your client want to see where item is located in incoming payment.
If you can define Location,probably can help to find your solution .
Thank you
Bishal

Sequence Code in Incoming payment

Hi Experts,
Is it possible that we can can show the sequence code in Incoming payment window and How ?.
Please can any one share their experience regarding the sequence code in Incoming payment window.
How we can accomplish this particular task in SAP Business One 2005B .
Regards
Amit Tyagi

Hi Marcella,
Thanks for reply
I would like to inform you that we can put the sequence of document by follow below path:
Administration>Setup>Finances>Tax>Sequence.
This functionality work when there are more than one profit center of an enterprise just for tracking of the document profit center wise.
I think above description help you to understand the concept of the sequence code.
Regards
Amit Tyagi

BP Ref Nbr in Incoming Payments

whenever my users are trying to create an incoming payment, we want the Doc Nbr to be shown at all times. But for some reason they are able to see only the BP Ref Nbr in the incoming payment grid. Although we go to Form settings and check OFF the BP ref nbr, the next time they close and reopen the Incoming Payment screen, that check mark for BP Reference Nbr comes back again.
Can i change it once and for all , to make it that only DOC Number shows and not the BP Ref Nbr in the GRID. If yes where can i change this setting to be default for all my users.
Thanks
raghu

Hi,
Please check the following steps :
Goto the Incoming Payment and uncheck the box reference number and check the box document number.
Then close the incoming payment window and re-open. You will see that the document number column is appearing and not the BP reference number.
Also, check Note No. : 715714 regarding the issue.
Kind Regards,
Jitin
SAP Business One Forum Team

Formatted Search in Incoming Payments

Hi All, I require some assistance with a formatted search and query please.
I have create a UDF at a header level in an invoice - the value will be either D or blank.
I have then created a UDF at a line item level in the incoming payment window.
I would like to create a formatted search that looks at the invoices at the line item level in the payment window, and returns the value from the invoice (D or blank). Any assistance on what the query should be would be greatly appreciated.
Also, as the invoice numbers are variable fields, what field should be used for the 'auto refresh' option?

Hi Lisa,
It is very difficult to have create FMS that can be linked to header from row since it has different table. Row table and Header table are different. Why could you try to use the info from invoice table directly that can return value from it (D or blank) as you want ? what is the point in the invoice that can return the value ? is it invoice number ?
Rgds,

Incomming Payment (payment means) default?

hello,
i want to change the default G/L Account in the Payment Means Window in the incoming payment, (see image attached) http://i264.photobucket.com/albums/ii184/abing430/IncommingPayment.jpg
thank you in advance.....
FIDEL

hello suda,
thanks for the reply, i been in Administration > Setup > Financials > G/L Account Determination > Sales tab...... then i tried to change the check received to 101160-00-00-00 but i cannot find the 101160-00-00-00 in the list provided, maybe it is because 101160-00-00-00 is a cash account, but when i am in the incoming payment window i can see the 101160-00-00-00, thats why i manually change the default 101112-00-00-00 Check Fund to 101160-00-00-00....
this is the image, pls follow link
http://img401.imageshack.us/img401/3692/coa1vj9.jpg
Regardz
FIDEL
Edited by: Avelino Fidel on Jan 20, 2008 2:46 AM
Edited by: Avelino Fidel on Jan 20, 2008 2:50 AM

Currency Decimal Increases Incoming Payment Window

Similar Messages

Maybe you are looking for