No combinations could be generated
Hello,
i am working with IP and we are using characteristic relationships. And i have a warning message in the messages after the initializing a workbook. The message is "Cannot generate combinations for MultiProvider 'ZCS_PA054'" and "Cannot generate combinations for MultiProvider 'ZCS_PA056'" and a third message "No combinations could be generated". The thing is that there are many queries but just these two queries based on these two mentioned aggregation level have that warning. Second is that everything worked fine but after an upgrade to EHP 4 for ERP and an upgrade to EHP 1 for Netweaver. Before the upgrade it worked fine.
I am not an expert but I tried to debug it and i think it has something to do with the interface method IF_RSPLS_CR_CONTROLLER~create method but i am not sure. Does anybody faced a similar issue? Can anybody help me with this?some hint would be very nice and helpful.
Thanks and kind regards,
Murat
done
Similar Messages
-
Could not generate flash file.
Hi all,
Hoping you can assist!
I'm experiencing the error message when trying to export my dahsboard - "Could not generate the Flash file (SWF); the cause is not known".
Things to note:
*Only occurs when using multiple series on a combination chart (I.e. exports fine when only using a single data series, as soon as a add a second, it won't export.
*Doesn't occur when i copy/paste values over formula (suggests a formula related issue)
Has anyone experienced a similiar error message before? If so, what did you do to fix the problem.
Happy to provide the .XLF is required.
Cheers,
ChrisHI,
Yes, we've used several date formulas. I have remove the =today() however we still have quite a few day/month/year formulas. Still having the same issue.
The date formulas a required as the user needs to have the ability to adjust the data they are looking at by period (daily/monthly etc).
It seems to work okay when the number of cells the graph is reffering to are reduced (approx 20). I currently have it looking at 31 days of data which is a requirment.
And no add-ins are currently installed. This issue is repeated on 2 other pc's.
Any other ideas?
Thanks! -
Thread: Could not generate the XML in single thread mode
Hi all,
I have created a report using PLSQL Procedure method after submitting the request I am getting the following Error.Couldn't sort out why I am getting the error while running the report.
Error in "Multi threaded or single threaded execution block" of XXRX_REPORT_OUTPUT_PKG.insert_into_nested_table procedure
ERROR :ORA-20005: Could not generate the XML in single thread mode
XXRXERROR: XXRX_REPORT_OUTPUT_PKG.run_report SQLERROR: ORA-20005: ORA-20005: Could not generate the XML in single thread mode
Can someone help me out finding the issue
Thanks in AdvanceHi,
Please read SQL and PL/SQL FAQ
We cannot guess what is the error if you don't post any part of your code.
Additionally when you put some code or output please enclose it between two lines starting with {noformat}{noformat}
i.e.:
{noformat}{noformat}
SELECT ...
{noformat}{noformat}
Regards.
Al -
Error creating AIR file: could not generate timestamp
I have been getting this error the last few days.
Error creating AIR file: could not generate timestamp:
sun.security.validator.BalidatorException:PKIX path building failed:
sun.security.provider.certpath.SunCertPathBuilderException: unable to find
valid certificatio path to requested target.
https://timestamp.geotrust.com/tsa
I found one thread saying this url must be accessible but when I go there I get "404 -- page not found".
Since this was working now it is not I'm looking for a direction.Hey Karthik,
First of all, are you using ECLIPSE? What is your development
Environment. I had run into same issue, after hours of trying
different things, I installed the FLEX BUILDER and was able to
create the application without any issues. I have also noticed that
FLEX BUILDER works more smoothly than Eclipse and since then I have
been developing within FB.
Thanks. -
I am getting the following error message when I try invoking
a webservice.
Could not generate stub objects for web service invocation.
Name: ProgrammePrivilege. WSDL:
https://clientaccweb.reseaudistinction.com/CardHolderInfo.asmx?WSDL.
org.xml.sax.SAXException: Fatal Error: URI=null Line=11: The
element type "META" must be terminated by the matching end-tag "".
It is recommended that you use a web browser to retrieve and
examine the requested WSDL document for correctness. If the
requested WSDL document can't be retrieved or it is dynamically
generated, it is likely that the target web service has programming
errors.
The problem is, the webservice is working fine, the
application was working yesterday, the error message just appears
after a couple of days and I have to refresh the service in the CF
Administrator. Once I refresh it, everything starts working again.
Anyone else got this problem? ANY help would be appreciated!
If you guys need my code anyway, I can attach it but like I
said, everything works for a couple of days, then, out of the blue,
it stops working so I doubt that it's my CFINVOKE that's the
problem...Similar kind of problems here - reported back to Adobe a
couple of months ago, so let's wait and hope for the best. My
problems have related to registering multiple web services and
executing them. One problem is that, If I register two identical
(and quite complex) web services, I can only execute either of
them. After CF restart, either of them works, but invoking the
other doesn't work.
For example; CF_Restart -> Try A first, A works -> B
doesn't. Also, CF_Restart -> Try B first, B works -> A
doesn't.
CFMX7.0.2, Apache 2.2, WinXP -
SCB indicator is missing or is not valid-No DME could be generated for the
Hi All,
Using transacttion F110,
vendor payments were generated. Payment run successful.
In 'Display Payment Run log',
Warning: Check whether a duplicate payment medium has been created
SCB indicator is missing or is not valid
No DME could be generated for the following documents
CoCd Payment document/Payment order
0100 2000199545
>
> Overview of the files generated (DME)
> Name / File name
> DME file (TemSe) - bank BK03 / DTA111128154701_3215
>> Error log / LISTFS / 0000093865
I have checked the document has SCB number stored.
please suggest.
Thanks and Regards
ReenaHi Reena,
The error you have mentioned in the initial description is the error code F0265.
Regarding the error code F0265, this arises because the payment medium programs RFFO* look for the field bseg-landl and bseg-lzbzk to be filled.
These fields are necessary for Germany as the f1-help states and if they are missing, you receive these error messages f0265. Please have a look at note 23562 as well for more information.
Sometimes users forget to enter SCB indicator in the invoice document and thus it results in problem reported error messages
at the time of creating payment medium.
In this case either you can make the SCB indicator field "required" in the field status or create a validation rule for those invoices for which SCB indicator should be entered.
To derive SCB indicator automatically I think substitution rule could be of help too as a workaround.
Hope this helps.
Kind Regards
Soumya -
No persistent reference could be generated for object 'PAYLOAD'
Hi,
I'm using a multimapping inside BPM mapping 2 messages into one message and it fails for some reason but when I try to have a look at the BPM workflow, I cannot see the 'PAYLOAD' in the MESSAGES_IN and MESSAGES_OUT properties of the container. However the HEADER of the incoming message and outgoing message is visible.When I try to see the payload it says 'No persistent reference could be generated for object 'PAYLOAD''.
The mapping gets executed without any issues via BPM or when we test it manually in interface mapping.This is the case with all other BPM's too so it more looks like some property which has to be set in PI to make the payload visible.
Thanks & Regards,
Harish.Guys,
Can somebody help me ?
The main reason behind why I am trying to see the payload inside BPM is
that I am using a multimapping where I send two requests (input 1:one
with parameters/values to be replaced and second one(input2) has the
actual payload where replacement should happen) and output should be
the second message with values replaced.I am using a java mapping and
when I test it standalone it works whereas inside the BPM I get the
output same as the input2 i.e the replacement doesn't happen.
I am trying to see how the BPM is merging the two inputs to the
multimap which is stopping the java map to work as expected.
I guess something is wrong with the namepsaces as the input2 is the result of a webservice call and carries namespaces like pns, rpl etc. -
HI
When I put a network shared variable with fifo RT activated on my diagram, the arrow is broken.and I' ve got this message:
""LabVIEW could not generate code for the shared variable.You must open the VI in the project that contains the library where the shared variable resides""
If I uncheck FIFO RT option for this variable the arrow isn't broken anymore.
I 've no idea how to correct this weird error?
Autodeploy is on, and I've check copy / delete in diagram in tool/options\diagram
regards,
jamesHello,
I don't reproduce this error.
Could you send your VI?
Regards
VéroniqueD
NI France -
OWB: Not Able to Deploy Schedule, Says 'No dates could be generated'
Logging in as repository owner.
I have defined schedule and tagged with the process.
But there is no 'Deploy' option available against the schedule in control center.
Then tried to Edit the schedule where in 'Schedule Preview', its showing error message as 'No dates could be generated because the design repository is not installed on Oracle 10g or later. This does not prevent you from deploying the schedule to a 10g schedule location.'
Please help me for this.Logging in as repository owner.
I have defined schedule and tagged with the process.
But there is no 'Deploy' option available against the schedule in control center.
Then tried to Edit the schedule where in 'Schedule Preview', its showing error message as 'No dates could be generated because the design repository is not installed on Oracle 10g or later. This does not prevent you from deploying the schedule to a 10g schedule location.'
Please help me for this. -
Can I use AWT elements in a JSP, and so could I generate events with them?
This is because I�m doing a simple JSP that showing a button, my JSP is:
<html>
<%@ page import="java.awt.*" %>
<%! Button b = new Button("Hola!!!"); %>
<% add(b); %>
</html>
But when I tried to see the button in the browser, my JSP generates the following:
Compilation of '/RAID5/weblogic/myserver/classfiles/jsp_servlet/_gep/_alterno/_23_mayo/__mr4.java' failed:
/RAID5/weblogic/myserver/classfiles/jsp_servlet/_gep/_alterno/_23_mayo/__mr4.java:79: cannot resolve symbol
probably occurred due to an error in /gep/alterno/23_mayo/mr4.jsp line 7:
<% add(b); %>
Could somebody help me please?.....
Can I use AWT elements in a JSP, and so could I generate events with them?
Thanks!!!There are 2 ways to run a web page dynamically:
1) Reload the page via use of javascript or some other scripting language.
2) Use an applet to regularly check a URL for the data
Remember, as Paul pointed out, JSP's only generate HTML output. AWT components need to run inside a JVM not a just the browser.
I could recommend an applet but you may have problems with IE6 not supporting java. Otherwise there shouldn't be too much of a prob.
If you prefer to use an AWT/Swing setup (for example an application) rather than a JSP setup, Webstart is good for delivering online applications which operate standalone or remotely.
When you consider that the Java-Plugin and the Webstart puligin are about the same size it's just a matter of weighing up who your target clients are and whats easiest.
Cheers,
Anthony -
Adt.bat Could not generate timestamp: Cannot parse the response
I am using the command line to build an air app as follows:
adt.bat -package -storetype pkcs12 -keystore mycert.pfx
-storepass xxx -tsa
http://timestamp.verisign.com/scripts/timstamp.dll
myApp.air myApp-app.xml myApp.swf
However, I receive this error:
Could not generate timestamp: Cannot parse the response
I am using a Verisign issued Authenticode certificate. Has
anyone got any idea why this might be happening?
ThanksThere is no previous thread running for this application
(that's the first thing I checked out). As I said in the last
message, I can successfully launch my app from within FlexBuilder3,
but not from a generated .air file install.
At your suggestion, I created a simple "Hello World" type of
Flex application in FlexBuilder3. From within FlexBuilder3, I
exported it to an AIR file and installed it. This simple
application does indeed run on my system after being installed from
the .air file.
So there's something different about this new public release
of the FlexSDK than the last bet release. I compared that simple
project contents and layout to my project. The big difference is
that all the source files for the simple project was automatically
dropped/created in a child 'src' folder under the main project
folder. I also noticed that when installed, there were files
missing for my app, but not for the simple app. The big difference
there being that only the files in the src folder were copied into
the AIR installer to be installed. Nothing outside of that folder
was part of the install codebase!
I therefore refactored my code (yet again) to move all my
source files (including my external config XML files) into a 'src'
folder under the main project folder. After a lot of tweaking in
FlexBuilder3 to get it all working again and running, I exported to
an AIR file once again. This time all the files were included, when
I ran the new installer. The application now launches successfully.
The next step is to replicate this via the command-line ADT
tool.
It would have been nice to know the changes in this area (src
folder) before going this far into the process. Unless they are
documented in some obscure release note somewhere that I am not
aware of yet.
I'll let you know how the ADT run goes when I get the chance.
Thanks for your help everyone. -
CiscoWorks LMS 4.0.1 - Could not generate the report
Hello,
I am running CiscoWorks LMS 4.0.1 since 6 months and I wanted to generate today a report about the interface utilization on 2 Cisco switches (Catalyst 3750G). The corresponding job is created, it runs and then i get "succeeded with info" in the "Run Status" column. When I want to click then on the "View Report" link, I get the following error: "Could not generate the report. Either data is not available for the specified duration or the report job failed."
I tried the same procedure with 2 other switches but I have got the same result.
Does anybody has an idea of how I can fix this issue?
Thanks a lot in advanced.
Best regards,
Marc HoffmannHi Marc,
I have this problem too. I rebooted my Windows but no solved. You known the service name responsible for this error? You have any other sugestion?
Thank you !!! -
How could I generate sample schema's after 11g r2 installation
Hi,
I appreciate if anybody let me know that how could I generate sample schema's after database installation (11g r2).
Regards,hello
you can download the script in the this link
http://www.oracle.com/technology/obe/obe1013jdev/common/files/sample_schema_scripts.zip
or
sqlplus /nolog
conn / as sysdba
@mksample.sql
regards
zekeriya -
Could anyone generate a SolMan Key for me?
Dear All Experts,
I have to install an ECC 6.0 IDES as soon as possible, but there is something wrong with our solman system, could anyone generate a solman key for me?
my SID is IDS
my host name is sap
and my instance number is 00
It's really urgent, thanks for your kind replies.
Best Regards,
AfshinPaul Babier wrote:
> You may not request a license key n this fashion.
> You can acess service.sap.com/licensekey
> You can call your CIC please refer to this note 560499.
>
> But how do you expect another custoemr to generate a license key, when I will belong to their installation?
> This is just not an acceptable request.
Paul, a license key is not the same as the requested SolMan Key.
A License Key is provided by SAP (and will be installed via transaction SLICENSE in case of ABAP Web AS Systems).
A Solution Manager Key is generated through SAP Solution Manager, transaction SMSY. (SAP Note 811923 - Generating the SAP Solution Manager key)
Anyhow, requesting a Solution Manager Key is not appreciated in this forum.
Regards, Ruediger -
SQL2310N the utility could not generate statistics: error "-911"
Hello,
we have a 46c system with DB V.8.2.2. Everytime we planned over db13 the runstat_all we get an error message.
Errormessage: Error -2310 in dmdb6upd.c(687):
SQL2310N the utility could not generate statistics: error "-911"
Regards,
Alexander TürkHere some more information:
07.01.2007 13:00:31 Ausführung des logischen Kommandos REORGCHK_ALL auf Rechner b0d0m102
07.01.2007 13:00:31 Parameter: -t all -n PH0 -z 3600 -m b -l 1800
07.01.2007 20:01:09 pct_long_lob has been set to 10 percent
07.01.2007 20:01:09 Checking for old entries in db6treorg/db6ireorg ...
07.01.2007 20:01:09 Reading table names for runstats ...
07.01.2007 20:01:09 Tables to process: 26350 ...
07.01.2007 20:01:09 ERRORMESSAGE: Error -2310 in dmdb6upd.c(687):
07.01.2007 20:01:09 SQL2310N The utility could not generate statistics. Error "-911"
07.01.2007 20:01:09 was returned.
07.01.2007 20:01:09
07.01.2007 20:01:09 table: SAPR3.DB6PMHT
07.01.2007 20:01:09 ERRORMESSAGE: Error -2310 in dmdb6upd.c(687):
07.01.2007 20:01:09 SQL2310N The utility could not generate statistics. Error "-911"
07.01.2007 20:01:09 was returned.
07.01.2007 20:01:09
07.01.2007 20:01:09 table: SAPR3.DB6PMHT_HD
Maybe you are looking for
-
Taking long time to get the data while trying to drill down the freechar's
hi experts, i have a query on 0sd_c03, in this query PLANT and SALES ORG. are in free characteristics, whenever i am trying to drill down the plant or sales organization it is taking lot of time to retrieve the data. what is the problem, give me sugg
-
Artist on ipod touch showing up as unknown but not on itunes
I have an ipod touch 4G which is updated with iOS 5.0.1. I am trying to organize some of my music by artist names and album titles.But for some reason after i went into itunes and put in the names of some artists for their songs,the artists won't sho
-
Statistics aggregation is not enabled
Hi, in 10g R2, in OEM for a server I have this message : Statistics data is not available because statistics aggregation is not enabled for the selected clientWhat should I enabled to have statistics aggregation ? Thank you.
-
Hi, my phone is showing this [N] symbol on right side of the status bar for certain apps like Facebook, Whatsapp, etc. Any one knows what it means?
-
I have a 5th generation ipod touch 32gb. The ram is about 75% full, it is running extremely slow, consitantly lagging, and always freezing/ crashing. The battery is also draining way slower than it should, any advice? This is ruining my experienc