No Component exists with the name /bic/zplant2

Hi,
i am getting the error for this abap code
this code is written in Start routine in BW.
but it is giving error while running or checking the program..
the same start routine works fine in Production, but it gives error in Quality.
r_plant like /BI0/MPLANT-/BIC/ZPLANT2,
WHAT IS WRONG HERE ???

the info object ZPLANT1,ZPLANT2 exists and is active in both quality and production.
but there is no data in master data tables for zplant1,2 in production/quality.
the requirement was to fill up the Key and text values into custom info objects
FOR e.g.
there exists hierarchy on 0plant
0plant has 2 sub nodes ...east and west
east has 3 subnodes east1,2,3
west has 4 sub nodes west1,2,3,4
now zplant1 should show east and west, key and text
zplant2 should show east1,east2,east3,west1,west2,west3,west4
so there was code written by previous Consultant who left company.
now the value doesnot populate in info objects zplant1 and zplant2 correctly
so i found it gives error in Development environment.
code exists in production and quality but no effect as those objects has no values in production and quality.
Basically , 0plant is attribute of 0MAT_PLANT and exists in transfer rules & update rules.
and i am trying to fill up the hierarchy off of 0plant nodes into Zobjects

Similar Messages

Runtime Error - No Component Exist with the name "FLAG"

This is an issue I am having from chapter 5 exercise 2 from the ABAP Basics book.
Moderator message - Welcome to SCN.
Please note that there is a 2,500 character limit to posts in the forums. Please post only the relavant portions of your code..
Also, Please read Please read "The Forum Rules of Engagement" before posting! HOT NEWS!! and How to post code in SCN, and some things NOT to do... and [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers] before posting again.
Rob
Edited by: Rob Burbank on Jun 16, 2010 3:12 PM

Declare variable flag in the top include

LSMW using IDoc Method *Error :No partner exists with the name '', type ''*

Hi All,
I am a newbie. I am trying LSMW using IDoc Method.
I got an error when i executed Start IDoc Generation step: No partner exists with the name '', type ''
Could anyone tell what wrong I might have done,
Thank you,
Shiv Ram

Hi,
You have to setup your IDoc configuration in LSMW:
1) Enter the menu \Settings\IDoc Inbound Processing
2) Create a FILE port by clicking "Maintain Ports"
3) Create a logical system (LS) partner number by clicking "Maintain Partner Numbers"
4) Be sure your partner profile that you create is "Active" by clicking "Classification"
5) In the end click "Activate IDoc Inbound Processing" bottom.
Run your LSMW again. This time it shoud run wothout any problem.
Hope it helps.
Chang

Create an object with the name passed in as a string argument to a method

Hi,
I am sorry if it's too trivial for this forum , but I am stuck with the following requirements.
I have a method
void abc(String object_name, String key, String value)
method abc should first check if there exists in memory a hashmap object with the name passed in as argument object_name.
If yes ..just put the key and value there.
if not , then create the hashmap object called <object_name> and insert the key/value there.
Can anybody help me in the first step i.e, how to check if an object exists with the name passed in and if not then create it.
Will getInstance method be of any help?
Thanks in advance for your response.
-Sub-java

Dear Cotton.m,
Thanks for your suggesstion. I will remember that.
But somehow I have a strong belief that you still need to consult dictionary for exact meaning of the words like "upset" , "frustration" etc. Not knowing something in a language , that too as a beginner, does not yield frustration, but increases curiosity. And people like petes1234 are there to diminish that appetite.
To clarify above, let me compare jverd's reply to my doubt with petes1234's.
jverd said it cannot be done and suggested a work around (It was perfect and worked for me) While petes1234 , having no work in hand probably, started analysis of newbies mistakes.
jverd solved my problem by saying that it cannot be done. petes1234 acted as a worthless critic in my opinion and now joined cotton.m.
Finally, this is a java forum and I do not want to discuss human characteristics here for sure.
My apologies if I had a wrong concept or if I chose a wrong forum to ask, where people like petes1234 or Cotton.m show their geekdom by pointing out "shortfalls" rather than clearing that by perfect examples and words.
Again take it easy and Cotton.m , please do not use this forum to figure out others' frustration but be a little more focussed on solving others "Java related" problems :)
-Sub-java

Cannot backup my files / copy my files and folders due to error message " The operation can't be completed because an item with the name ".DS_Store" already exists. "

Hi Apple community!
I have a [rather worrying] problem.
When I try to copy all my files from my documents on my mac [or the entire documents folder] into an external drive, I get this error message
" The operation can’t be completed because an item with the name “.DS_Store” already exists. "
I am not given an option to skip this file or anything else.
But I simply cannot complete the operation!
I have tried deleting a few of the .ds_store files, [both in the original and in the destinations]
but no success.
The same thing keeps happening.
At first, this was just happening when I was trying to backup to my dropbox folder [the one on my mac's harddrive, which gets synced to the cloud],
but then I tried to back up my documents to my external hard drive, and I realized it is giving me the same error message.
So effectively, it seems I cannot backup my files anywhere!
Any help or advice would be greatly appreciated.
Thank you.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Error message "The operation can't be completed because an item with the name .DS_Store already exists"

Major headaches with copying files and folders between drives. I constantly (and I mean constantly) have to resort to copying files across in small batches (fewer than 10 works best) because anytime I try to copy lots of files and folders from my mac to an external hard drive (or from one external HD to a second external HD), I ALWAYS get the error message "The operation can't be completed because an item with the name .DS_Store already exists".
The files and folders are all Mac-generated, so hint or trace of foreign OSs in the mix.
All file types are susceptible
the HDs are all Mac OS X formatted, no foreign file formats involved
the HDs are all journal-enabled, OS X extended formats
have looked on here for previous posts, past suggestion was to disable creation of DS_Store files - not really a solution and realistically, defeats the purpose of their creation
any ideas anyone?
would appreciate any thoughts or sugestions, this has got me beat
the context is that I have a lot of image files that I am copying (trying to...) new external 3TB drives for backup and the job appears endless if I have to do this in batches of 10 or so..!
many thanks for any suggestions

This is definitively a nuisance. When copying large amounts of files between volumes try opening a terminal window and use use ditto. You need to type the directory paths of the source and the destination volume. When it starts ditto just coupes and optionally overwrites anything on the destination. You can get a verbose mode where it lists all activities.
gunnars-mac-mini-i7:Volumes gunnar$ man ditto
NAME
     ditto -- copy directory hierarchies, create and extract archives
SYNOPSIS
     ditto [-v] [-V] [-X] [<options>] src ... dst_directory
     ditto [-v] [-V] [<options>] src_file dst_file
     ditto -c [-z | -j | -k] [-v] [-V] [-X] [<options>] src dst_archive
     ditto -x [-z | -j | -k] [-v] [-V] [<options>] src_archive ... dst_directory
     ditto -h | --help

Problem with copying to external drives 10.8.3 "the operation can't be completed because an item with the name .ds_store exists"

After upgrading from 10.7.5 to 10.8.3 I cannot copy certain folders to any external drive. the operation can't be completed because an item with the name .ds_store exists. I have seen this problem in discussions for many years with no real solution. Does anyone have a resolution? Please help. This is very frustrating as I work in two locations and copy folders back in forth all the time.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

The operation could not be completed because an item with the name xyz already exists

I am trying to make a click and drag backup on an external FAT 32 drive to compliment my Time Machine backup (long story) and I've done this each time by dragging my critical folders into the drive. I get a message asking me to stop, replace or skip, and whether to apply to all items. i click replace, apply all, and let it go.
however, one stubborn folder refuses to comply. every single time I click and drag a group of folder that includes that one, I get a message saying "the operation could not be completed because an item with the name xyz already exists" even after I selected the the "apply all" prompt. at which point, the Mac stops transferring ALL the other files.
I figured, OK, i'll just transfer the other folders individually and then deal with this folder later. so I do that, and once I get to the offending folder, I try to transfer just that one folder into the drive. no good; I get the operation message again. I decide to just transfer the contents of the folder, rather than the folder itself. No good, I just get the operation message about one of the folders within the main folder.
anyone know the cause, or at least a fix?

If you've installed a system modification called "TotalFinder," remove it according to the developer's instructions after backing up all data. Log out, log back in, and try again.
Otherwise, open the Info dialog on both the source and the destination volumes. What is the Format of each? For example, it might be "Mac OS Extended (Journaled)".
For some other possible solutions, see:
operation can't be completed because an...: Apple Support Communities

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

Error when creating a user - IAM-3010183 : An error occurred while checking if a user already exists with the Common Name generated.

in OIM 11g R2
Message was edited by: 2b3c0737-074f-48d0-a760-e24e3ed9a37c

SharePoint 2007 Content deployment Error: 'A folder with the name already exists.

Hi, In SharePoint 2007 one Content deployment job is failed with below error:
Content deployment job 'Remote import job for job with sourceID = some id' failed.The exception thrown was 'Microsoft.SharePoint.SPException' : 'A folder with the name PublishingImages/AEI-2014/Blue already exists.'
From last 3 days I am getting this error and previously this Job was running without any Error.
In Import Log file getting message: "FatalError: A folder with the name PublishingImages/sg-2015/yellow already exists."
Please tell me how to resolve the issue.

Hello,
It seems same folder exist in destination server that's why job is failing. You need to check destination server and remove the same name/GUID from site then try again.
See this technet for more info: (see "Conflicting content on source and destination" section)
http://technet.microsoft.com/en-us/library/dd795107%28v=office.12%29.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see<br/> Please remember to mark the replies as answers if they help and unmark them if they provide no help

Program related ENHANCEMENT-POINT/SECTION with the name LMEPOF8D_02 exists

Hello
In an upgrade, after finishing with the SPAU task we got the following error in the standard object LMEPOF8D:
A program related ENHANCEMENT-POINT/SECTION with the name "LMEPOF8D_02" already exists.
Anyone knows which cause could be generate this kind of error?
Thanks in advance for your help
Best Regards,
Leonardo

Hello Sandra,
We have finished with SPAU. Regarding LMEPOF8D include, we kept with the ECC6 standard code. Therefore, from a point of view of code, it should be ok. However, we have this sintax error.
As you said, the include contains the enhancement point LMEPOF8D_02 which generates the sintax error, but we couldn't find if this enhancement is used in another place.
We also found note 1331844 and tried to fix the issue by using the 2nd solution propose in the note. But, it didn't work neither.
Do you have any idea about what cause could generates this error?
Thanks in advance for your support.
Best Regards,
Leonardo

BI Platform: Parameter object with the name "URL_PARAM"... does not exist

Hi,
I'm facing this issue with only one dashboard in BI4 Platform. When trying to view it through the BI Launch Pad, I get the following error:
"Parameter object with the name "URL_PARAM" and the index "0" still does not exist in the parameter 1[...]".
I've seen this thread where a similar thing was reported with NetWeaver platform.
My client as well as server versions are Release 1.4 SP0 Patch2 (14.0.5).
Also, although some of the pictures referenced in the dashboard are not in the Public Folders on BI4. Could it be that it's not able to reference the images and hence not be displaying the whole dashboard?
Please let me know if anyone has a solution to this.
Thanks!
- Sakshi Dhakad

Hi,
So here are the versions we currently have:
SAP BO Design Studio (64 bit) - 14.1.0
SAP BO Design Studio 1.4 for BI Platform - 14.1.0.349
And on checking on Central Management Console, I get this:
SAP BO BI Platform 4.1 Support Pack 5 Patch 2
Version: 14.1.5.1568
Also, I'm not sure if I installed an add-on or the patch. Based on these versions, could you tell me how to fix the issue ?
Thanks!

The operation cannot be completed an item with the name "...already exists

Hello mac users,
please help me... I can't copy to Applications any larger *.app file. I try drag Ableton (live.app ~120mb) or Mailplane.app (76mb) to Application dyr, but I saw message: "the operation cannot be completed an item with the name "..." already exists". But i had never install this apps before.

So, you are dragging the application from it's folder on the disk image directly to your Applications folder. If that's the case and you still get this message, have you ever installed that application before?
If it was installed at some time in the past, look in /Library/Receipts to see if there is a .pkg or a .bom for it. If you find one, delete it and try again.
EDIT: I'm downloading ableton now to see what's going on... OK no problems here. I dragged it to my Applications folder and now have a folder named "Live 7.0.10 OS X" in my Applications folder.
Perhaps you are looking for it under the wrong name?
-mj
Message was edited by: macjack

How to install Exchange Server 2010 with the name of my existing Domain Controller.

I have my Primary domain Controller as abc.com in 2008 r2 standard. abc.com is registered. I want to set up Fresh Exchange Server 2010 sp2 with the name of the same
abc.com domain name. Please guide me the steps how to do that. Waiting for your kind response. :)

Hi,
From you description, you want to install an Exchange server 2010 in the abc.com. When you set up your Exchange, Exchange need to join in a domain. You just need to specify the domain to abc.com.
What's more, here is a helpful blog about Exchange 2010 installation for your reference.
HOWTO Install Exchange 2010 - Step by Step
http://blogs.technet.com/b/ferris/archive/2010/03/05/howto-install-exchange-2010-step-by-step.aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

PortalRuntimeException in Business Object document iview No portal component associated with the following context

Hi all,
We are stumped with a problem in our QA Enterprise Portal (7.3.1 Sp7) that throws a portal runtime error when we preview a Business Objects document iview. The Business Objects Server versions are 4.0 SP5 and/or 4.1 SP3.
The error is caught in the the defaultTrace file, /usr/sap/QNW/J00/j2ee/cluster/server0/log
[EXCEPTION]
com.sapportals.portal.prt.runtime.PortalRuntimeException: There is no portal component associated with the following context:
pcd:portal_content/com.summit.SES_BI/com.summit.iviews/Daily_Margin
at com.sap.portal.prt.component.PortalComponentContext.<init>(PortalComponentContext.java:93)
Here is what we have tried
* Confirmed the iviews exist in the PCD, by browsing to the content folders and right lick, preview on the iview.
* Our PRD and DEV systems work correctly and are on same versions of EP Runtime and java. 7.3.1.7.0.201..
* Occurs with all Businessobjects iviews from the QA portal and all doc types, webis, dashboards. Tried creating new iview.
* Reapplied the com.sap.businessobjects.iviews.templates.epa to the Portal from t he BI 4.1 SP3 distribution
* Deleted and recreated the BI portal system connector using the SAP BOBJ system template set path to http://bi-qas:8080/BOE
* Set the embed key value in the BI system connector property and in the custom global.properties file, restarted tomcat and SIA services
* Set permissions for everyone end user on the content folders and the BI system connector
* Confirmed Single sign on configured correctly between BI and Portal
* Confirmed that the QA BI server is configured correctly by directing the working DEV Portal to the QA BI server.
* Performed actions in note 1709737
We are certainly stuck and the defaultTrace file is not very informative. Any suggestions are greatly appreciated
Lee Lewis

This is resolve with note 1615838 - SAP Netweaver Enterprise Portal 7.3 iView creation with BI 4.0 results in exceptions.
The note includes a file portalapp.xml that need to be inserted into com.sap.businessobjects.iviews.par that is included in the BI server distribution.
Then deploy the ear file.....
Odd thing is that the note mentions 4.0 and we are on 4.1 SP3...
Environment
SAP BusinessObjects BI Platform 4.0 SP02 Patch 4 or lower
SAP Netweaver Enterprise Portal 7.3
Lee Lewis

No Component exists with the name /bic/zplant2

Similar Messages

Maybe you are looking for