No connectivity between my Mac and Apple TV??

So if I understand it, you can't show in your TV what is showing on your MAC screen even though both are connected to the same WIFI-n network? Somehow that just sounds wrong. You know Photo's, Video, Sound, etc.

Thanks for the reply. I think the concept of C&C (Computers and Communications) or convergence of everything is the future. Why shouldn't everything we have not be able to exchange data among themselves? Atv seems like a good product but I think I will wait until the product integrates more than just my Ipod.

Similar Messages

Can I use the same apple ID to face time between my Mac and ipad2

I have tried to use FaceTime between my Mac and iPad 2 using the same apple ID and I cannot connect. Do I need two separate apple ID's to do this?

OK SO My original email on my ipad is a .mac ( which is my email from my apple ID)
After reading your advice above I added another email which is a .me email I tried to facetime my husband on his airbook and it would not work. Do I have to eliminate one of the email addresses? And if I do remove it from my Facetime settings on my ipad will it be removed from my macbook pro as well?

My home sharing continually fails between mac and apple tv 2.

my home sharing continually fails between mac and apple tv 2, even during watching a movie. I go to the mac to re-turn on home sharing but it is still on. Any tips? I also have to turn off and back on at the mac every time i switch on my apple tv.

Sharing Stopped working again over night.
I went to Apple Support Artical TS2972
As soon as I did this Home Sharing started working
http://support.apple.com/kb/TS2972
Firewall Section
5. Check Firewall Settings
If you have a firewall enabled in your router or computer, make sure that the firewall is not blocking communication between your computers. Home Sharing uses TCP port 3689 and UDP port 5353 to communicate with shared iTunes libraries.
In addition, Apple TV and Mac computers will use port 123 to set the time automatically. Incorrect date and time on either the computer or Apple TV can cause errors for Home Sharing and connections in general.
If you are unsure whether your router has a firewall or the required ports open, test additional devices or another network to help isolate the issue. If the devices tested work on another home network, it is your router or network configuration.
For Mac OS X, you don't have to edit the port addresses, but make sure the firewall in Apple () menu > System Preferences > Security > Firewall are not set to:
Block all incoming connections
Allow only essential services
If you use another security/firewall software on your computer or router, follow this article or contact the manufacturer or check the documentation on how to open TCP ports 123 and 3689 as well as UDP ports 123 and 5353.
It made sense to me, but its still puzzling me after restarting a router would (in my first attempt) resolve the issue for a day. This this time I applied the port forwarding TCP and UDP ports and saved the settings in the DLink DIR-655 and both my iPad2 and iPhone 3GS were now again finding the share. My ATV2 is also now accepting the Share.
Tommorrow will be the true test.

How do I connect both a Mac and PC to Apple TV Home Sharing?

Goal
- I am trying to share both my PC and Mac through my Apple TV2 on the "Computers" home sharing menu.
- These are 2 seperate iTunes accounts as they are 2 different owners of the PC and Macbook.
- However, home sharing only allows me to have one at a time, can I not have 2 computers connected?
(The menu is in fact plural and says "Computers" not "Computer")
Attempt
-I turn on home sharing on my PC with my PC iTunes account, it then shows up on the "Computers" list as PC
-I turn on home sharing on my Mac with my Mac iTunes account, it then shows up on the "Computers" list as Mac, but it deletes the PC share
Troubleshoot
-So I started from scatch and connected the PC share with my PC itunes account, it shows up,
-Then I connect the Mac home sharing with the same iTunes login as my PC, but it also erases my PC from the "Computers" list and just displays the Mac.
Question
-How do I connect both a Mac and PC to Apple TV Home Sharing?
-I want them both to show up in the "Computers" list.
-So the final result will look like this on my Apple TV menu:
Computers
-PC
-Mac
whew... I'm out of breath... I hope there is an Apple Genius out there that can help.
Thanks!

After retrying the home share with the SAME ITUNES ACCOUNT ON HOME SHARING I finally got it to work.

IOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change ?

iOS 5 used to allow Airplay between iPad (WiFi) and Apple TV (Ethernet) as long as they were on the same network, i.e. connected to the same wired/wireless router. In iOS 6, now both the iPad and the Apple TV have to be on the same network and both have to be connected using WiFi ? Why did they change this ? Means that the iPad and the Apple TV box both have to be in range of the wireless router when this wasn't a restriction before. Apple TV could be anywhere as long as it was connected to the same wireless router via ethernet cable. Seems like an unnecessary thing to restrict.

I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time!

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall. Help!

MY iPhone 5C suddenly stopped working. It wont connect to my Mac and repeatedly reboots from the apple Logo when plugged into the wall.
There is no water damage or anything. I got that checked at the Apple store. I also have Apple Care + but didnt let them give me a new one yet because I have photos on this that I have no yet backed up that are very important. They are the last photos I have with my grandfather. Can anyone help me. Please!

If the phone shows the "connect to iTunes" screen, the data on the phone is most likely lost.
Connecting in recovery mode is your only chance to use the phone again, besides getting it serviced by Apple.
iOS: Unable to update or restore

Can't establish wireless connection between the printer and computer.

I recently upgraded my wireless to an Apple AirPort Time Capsule. I'm able to set up the printer via USB cable. And I'm able to set up the printer on the network via the Airport WPA utility. However I cannot establish a wireless connection between the computer and the printer. When I go to the printers window in my system prefereces, there is no wireless printer available to add in the "available printers" menu. Only the USB version printer is listed and of course when I disconnect the USB cable it shows as offline.I've tried all the fixes on HP's support pages. I've tried reinstalling the printer on both the router and the computer numerous times. The only thing I haven't done is reinstall the printer using the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download). And when I reset the printer to factory settings, then connect it to the computer via the USB, there is no installation software that pops up. Cant even find the **bleep** thing in "Finder". (I'm assuming that it should show up as some sort of external device.) I've checked to make sure both computer and printer are on the same network. (sometimes my computer will grab a connection with the next nearest network.) I've checked all the settings for the printer via the HTML configuration utility. I've even updated my Macbook software and restarted it multiple times. Note: the printer actually worked for a bit when I first switched routers, but the printer's wireless function went offline several times and then quit altogether. Really frustrated that I bought another HP product thinking this time things would be different. HP is no help unless you want to pay $$ for a phone call. I'm about ready to take this thing out in the desert to use for target practice and never buy another HP product ever again.

Hi , I saw your post regarding the problems you are having with your LaserJet Pro P1102w Printer not showing on your Macintosh computer. I may have found some resources for you.
I have a few questions for you, so I can offer some additional assistance:Before you upgraded to the Apple AirPort Time Capsule, was the printer working wirelessly without any issues?
When you say; 'I reset the printer to factory settings', how where you trying to do this?
I found some instructions from this post: How do I reset my Laserjet p1102w to its defaults, copied here for you:
To restore the printer back to factory settings, turn the printer off, hold down the wireless button and the cancel button (x button) then turn the printer back on and don't release the two buttons until the printer stops making noise. (When they say turn the printer off, I think they mean unplug the power cable.)
"I've checked to make sure both computer and printer are on the same network." Do you know if you are able to access the printers Embedded Web Server (EWS)?To access the EWS - Make sure that the Ready light () is on and that the printer is idle and silent.Press and hold the Cancel button (), and release it when the Ready light () begins blinking.The configuration page prints.Type the IP address or host name of the product in the address field of a supported Web browser, and then press Enter on your keyboardLet me know if this page loads
To answer a few more items you have listed:... When I go to the printers window in my system preferences, there is no wireless printer available to add in the "available printers" menu.This could be an issue with your print system, I recommend resetting the printing system and then Repair Disk Permissions - after that try to add the printer again.
... the "Install Wizard" software that is supposed to come with the printer - (mine never came with it in the first place and of course HP doesn't have it available for download)HP provides their software/drivers to Apple to be released through your Apple software updates. You can review this document on how to Install a Mac Printer Driver Using Apple Software Update. Which leads into your next point...
... there is no installation software that pops upWhen you connect the USB cable your mac may still recognize the printer software as being already installed - check for apple updatesOn the Mac, click the Apple menu (), and then click Software Update, or click About this Mac, and then click Software Update. A list of available updates displays.
... Not seeing the printer in "Finder" From what I understand most printers will not show in Finder unless you install a memory card into a supported port on certain printer models, only then will it read it like an external device. A few more things you can check are that the new settings in the Apple AirPort Time Capsule are setup to allow the printer to communicate. There are several of these settings listed in this document; Tips and Workarounds for Common Wireless Network Printer Issues. HP regularly releases firmware updates that may also correct the problem you are experiencing. You can click on this link to Getting Printer Updates for HP LaserJet Pro P1102w Printer. I did find 2 more documents that may offer some additional information as well;HP LaserJet Pro P1102w Printer - Connecting the Printer After Changing Your Wireless NetworkAn 'Unable to Find Printer' Error Displays for the HP LaserJet Pro P1102w Printer Please let me know if any of these steps resolved your issue, or the details of what happened. I look forward to hearing from you, hopefully with good news! Thanks,

Remote connection between two macs.

I'm trying to set up a remote connection between my iMac and my MacBook so I can share them over the network. On the MacBook's Terminal I'm entering the following command: "ssh username@hostname" witch is supposed to let me remotely login into my iMac, after a few seconds the command line prompt me with this message: "connect to host 1.2.3.4 port 22: Operation timed out". What am I missing?

This forum is for troubleshooting Apple Remote Desktop, Apple's application for managing networked Macs. You should post your question in the OS X networking forums:
http://discussions.apple.com/forum.jspa?forumID=1222

(Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
Let me know if you know why this is happening.

With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
Something you can try:
System Preferences -> Network
Gear icon on the bottom left, next to the [+] [-] icons.
Select *Set Service Order...*
Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

Adding a mini mac and Apple TV .

I currently only have a iPhone. But would like to make the plunge to full apple.
I would like a mini mac and Apple TV.
I need advise on the best way to integrate them into my system.
I currently have:
A pioneer amp.
A ps3 and a Blu-Ray player, these plug into the pioneer amp via hdmi.
The amp is connected to my tv via hdmi.
The tv is a 48" Panasonic 3d plasma.
There are 2 spare hdmi ports in the amp.
Can both products be connected by hdmi?
Is that the best way?
Can I plug one to the other and save a hdmi port on the amp?
If so, what cables will I need?
Thanks for your advice in advance.
I'm hoping to get myself the gear for Xmas

Not all computers can use the "Mirroring" feature found in Mountain Lion.
You can still mirror using iTunes and use "Airplay".

Wireless connection between two macs.

I have a Intel iMac downstairs and a G4 power pc iMac upstairs. The downstairs iMac has an internet connection, upstairs does not. What do i need to have a wireless connection between the two and how do i go about connecting the two computers?

Hi widge-
What you need will depend on which Macs are already wireless and which you will have to add.
There is a lot more information available here: AirPort + Time Capsule
Luck-
-DP

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud?

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud? I want to free up disk space on my Mac and assumed that the icloud would be a good way to do this, but having 'moved' 70Gb of files to the iCloud drive (I've upgraded to 200Gb storage) my Mac is still nearly full and I've realised that it seems to just Sync files just like dropbox.

So, the big question is did the Apple guys confirm that this is how the new iCloud drive should be working? I'm guessing, from your response, that this is indeed the case. Are they going to fix this anytime soon? I thought that this was a new function of the iCloud drive in Yosemite.
I just want an online storage facility to back up my photo & music collections. I did look at Dropbox as they have a good deal going with their Dropbox Pro, however this is still just a sync service where the Master files reside on your local disk drive - although I have read that there may be a way to work around this. Still not ideal.

2px Difference Between FF Mac and IE, FF(PC)

The Colored Menu Links on my test page have a 2px difference
in height between FF-Mac and IE, FF-PC.
Any idea what is causing this?
Is it me or should I use a conditional comment?
Test
Page Here
CSS
Here
Rich

Hello and Welcome to Apple Discussions.
Starting as far back as I know about. Mac versions of Microsoft Office:
Office 98
Office 2001
Office v.X
Office 2004
Office 2008
Office v.X was basically the same as Office 2001 but ran on OS X rather than OS 9. I am running Office v.X right now. Word, Excel, Powerpoint and Entourage all have version numbers starting with 10.something.
Office 2004 is currently onsale and is the latest version but is only optimised for PowerPC processors. Since early to mid 2006 Apple has used Intel processors. Office 2008 will be Intel native. You can purchase Office 2004 today and obtain a free update to Office 2008 when it's released early net year.
If you are running PowerPC Macs then Office v.X may well be suitable in fact Office v.X still runs fine on my Intel iMac with Leopard.
You might also consider:
iWork (link)
NeoOffice (link).
cheers
mrtotes

Ipad won't respond to forced shutdown...spinning between battery icon and apple icon and flashing home screen

ipad wont respond to forced shutdown...spins between battery icon and apple icon and short flashes of the home screen

First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

Did Mountain Lion break calendar and note sync between the Mac and iPhone?

When I was running Lion, my calendars and notes synced properly between my Mac and iPhone (with notes going into Mail.app). After upgrading to Mountain Lion, the notes on my Mac were moved into Notes.app and my calendars appeared to be unharmed. I've recently noticed that neither my calendars nor my notes are syncing between my Mac and iPhone.
I use iTunes to sync my data (either via USB or WiFi) and have no interest in moving to iCloud. I have tried the suggestion of enabling iCloud sync on my iPhone, then disabling, as well as telling iTunes to overwrite the calendar data on my iPhone. Neither of these approaches has solved my sync problem.

I found a solution to my problem. Hopefully it helps someone else too.
I deleted the following file and folder:
~/Library/Calendars/Calendar Cache
~/Library/Calendars/Calendar Sync Changes/
When I synced my iPhone, I was presented with several sync conflicts to resolve. I resolved them and applied the changes immediately. Now my Mac and iPhone are in sync and I've confirmed that changes are syncing from my Mac to my iPhone (I'll confirm that it works the other direction tomorrow when I can look at my calendar at work).
This is the thread that helped me:
https://discussions.apple.com/message/19121379#19121379

No connectivity between my Mac and Apple TV??

Similar Messages

Maybe you are looking for