No coverage after 'no service' message in known coverage area, No coverage after 'no service' message in known coverage area

Have an issue, that if my phone will not log onto the cellular network after a an hour or so of being in a network blackspot/no coverage area.
Will not log back on, in a know good coverage area, untill i do a reboot or a 'flight mode on/off'.
Swapped phone, swapped SIM, and on the Optus Network in Australia.
Any ideas??

There is no problem with your iPhone. It just doesnt update cause maybe it still is searching. Maybe there is a small enough signal present that the phone just constantly tries to connect. If you have never gotten a signal in your home, just keep it on airplane mode if it bothers you.

Similar Messages

Do not seem to be able to backup iPad via iTunes on to my PC. Message after connecting is "iTunes was unable to load class information from Sync Services, Reconnect or try later" Have tried that but get the same result. Can anyone assist?

Do not seem to be able to backup iPad via iTunes on to my PC.
Message after connecting is "iTunes was unable to load class information from Sync Services, Reconnect or try later"
Have tried that but get the same result.
Remedies I've tried are:
wait and try again
reboot
reload iTunes
NB hp is a relatively new machine and has previously backed up quite happily.
Can anyone assist?

RHoodnkt-
Try rebooting the iPad. Hold down both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. It takes a minute or two to restart.
Also be sure your iPad battery is not completely discharged.
Fred

What can I do after receiving the following message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later". This is the message I have received the last 3 days, can anyone help. Thanks

What can I do after receiving the following message: "An error occurred while contacting the radio tuning service. Check your internet connection, or try again later".
I have received this message the last 3 days, is itune radio down or am I the only one experiencing this type of problem?
Need help.
Thanks
Sam3

Ok.. Apparently it's not just me
Apple needs to make a statement or something on this issue. I'm running Lion OS X 10.7.3

My iPhone 4S suddenly stopped synching with my Outlook after I downloaded latest updates. I get this message: iTunes unable to load provider data from Synch Services. Reconnect or try later. What to do?

My iPhone 4 suddenly stopped synching to my Outlook 2010. This may be a result of downloading the recent iPhone and iTunes updates. I get this message: "iTunes unable to load provider data from Sync Services. Reconnect or try later." Another message tells me to delete the back up data on my computer as it is corrupted. I cannot locate this back up data. What should I do?

got that once a reboot and it was fine again

Help ....Error message when trying to open itunes 11 after installing..cant solve it !!!

Keep getting an error message when trying to open iTunes 11 after installing...running Windows ...have tried most fixes ...message says ...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Also when iTunes first opesn after installing ....the message come up that says "A required iTunes component is not installed .please repair or reinstalll iTunes (-45075)"
Have repaired , reinstalled , created and used a restore point etc etc
How do I fix this !!! Please

...iTunes.exe - Bad Image ...iTunes c:\Program Files(x86)\Common Files\Apple Apple Application Support\CoreADI.dll is not designed to run on Windows or it contains an error .....
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7,now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP,head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

I have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

i have no service and i cant activate my iphone 3gs after update to ios 5.0.1 can anyone help ??

touch me wrote:
it says ICCID: unknown
Not a good sign. Try forcing the phone into recovery mode & restoring it. If this fails, make an appointment at an Apple store:
Turn your phone off. Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. H

I am trying to re-install Creative Suite 5.5 Design Standard on my Widows 7 Professional computer after I had to replace the hard drive. I keep getting error message and I get "Exit Code 15: Media DB Sync failed". I have run C Cleaner with same results. Have Disabled UAC and Startup items and Services with no success. Please help - frustrated to no end. Can someone help me?

make sure you're using the adobe cleaner, not crap cleaner, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
copy the installation files to a desktop folder and install from there.

SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
Swanl

Hi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

RDS server message: could not initialize class com.adobe.rds.core.services.Messages

I just moved to a new host with my own dedicated cloud server. Using CF9. Everything seems to be working fine with the server, but i get the following error when connecting to it via RDS through CF Builder 2.
RDS server message: could not initialize class com.adobe.rds.core.services.Messages
I get it when i first connect to the server, then if i try to access it again, it will let me in. I also get an error when i try to open the first file. Then its ok.
I have no idea what it can be, i have not run into this on any other server that I have connected to.

Hello,
After 2 months of it not working for love or money. I got a new machine and ColdFusion Builder 2 and started over. It worked for a while. Then when the trial version timed out a few days ago it killed it again. With the same error. So it is definitely something that gets “switched” within the code or configuration settings. Rebooting about 3x seemed to fix it this time after entering the license number.
Yes to answer your questions below. Yes, I did all those things below. Re-checked and checked numerous times. Keep in mind the installation there worked for over a year then all of a sudden stopped. I hadn’t changed anything at all. And it just stopped dead, started throwing up that error.
I asked all the experts in my office. One guy knows CF and Java inside and out and could not figure it out. I searched the web and the issue is listed many times but with no real answers.
Thanks for getting back to me. I am up and running with new machine. But since I’ve seen the error on this machine now, I live in fear it will reappear and stop working. So if you come up with any thoughts I would appreciate it.
Thanks,
-Lyle

Sound for messages and e-Mail get turned off after using handsfree in car

Does anyone have a solution when sounds alerting messages and e-mails are turned off after using the phone in var with handsfree (using Bluetooth)? The sounds are turned back on when restarting the phone but reoccurs after driving in car with handsfree again. This is very annoying when takling several trips with car during a day. The phone still rings when receiving a call.

I did find a solution to my iPhone-iPod-music-overriding-streaming-streaming-services-while-connected-to-USB problem Although, this solution is likely only applicable to BMW owners with the BMW Apps feature aka 6NR.
There may be other/simpler ways, but this seems to work:
1) Launch Pandora (or could be Mog, or other BMW Apps app) BEFORE you start iPhone/iPod playback
2) Start playback of Pandora via ConnectedDrive/BMW Apps.
3) Press Home button on iPhone, launch your streaming app.
The car still seems to think it's in the ConnectedDrive audio menu, as evidenced by the Entertainment details screen. You can now consistently play back any other audio service via your iPhone without the iPod audio overriding what you're doing. Good times! The only drawback so far is lack of ability to skip tracks via the steering wheel.
As long as you haven't started iPhone/iPod playback when you get in the car, you can often skip steps #1 and #2, and go straight into the ConnectedDrive menu, then go to step #3. Either way, following steps #1-3 works everytime.

Messages - no user is allowed to login after server reboot

Hello all together,
I had to reboot a XServe with Mac OS X 10.8.3 and Server App 2.2.1 installed using the command line because I couldn't connect via ARD anymore at that time and the users couldn't login at all with their OD accounts.
After the reboot no user was able to login to the messages server which wasn't any problem before this reboot. "User ID or password is wrong". The messages service in server.app is running. I restarted it twice without any advance. The passwordservice server log shows up all requests and the passwordservice error log has no entries at all. I couldn't find any related entries in any of the logs I searched in, especially not in the system.log.
The users trying to login are local network users which are allowed to use this service and are all members of one group which is also allowed to use this service.
If I turn the messages service off and try it again I get the same error. Therefor I can't even say if the service is definitely running but port 5223 is opened.
Any suggestions?
I really appreciate your help!
Kind regards,
ragob66

Hello,
for information purposes:
A second server reboot resolves this issue!
Thanks!
Kind regards,
ragob66

HT1923 I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system servic

I'm trying to re-install itunes on my laptop & I am getting a message that has stopped the re-install & it says: "Service 'Apple Mobile Device" (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services." The diaglogue box gives me the options to abort, retry, or ignore; when I tried retry and ignore the re-install process stays stalled & the dialogue box comes back & I don't want to abort & start this all over to probably end up with the same issue; what does this mean & what do I do?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Just updated to IOS 7 and two issues: First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services".

Just updated to IOS 7 and two issues:
First when I connect my iPhone to my computer I get this error message:itunes was unable to provider data from sync services". I'm not sure what this really means...
The second issue is when I try to select "Manually Manage Music"
The iPhone "My iPhone" is synced with another iTunes libary on "MY-PC". Do you want to erase this iPhone and sync with this iTunes library? An iPhone can be synced with only one iTunes library at a time. Erasing and syncing replaces the contents of this iPhone with the contents of this iTunes library."
So... I don't want to do that, but I do what to be able to Manage my music. I'm not sure what it means by being synced to another iTunes unless it means to an older version of itunes?
Anyone have any ideas?

I cannot address the sync services error right now, but the error that you receive when you change from sync to manually manage music is what happens when you change. Once you change to manually manage music, it erases all of the music and will only put the music that you want on the phone, content that you manually drag over to it. See if this support document helps you out. http://support.apple.com/kb/HT1535

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full" i dont know what to do. Its been 2 days now.

I need help. My ipad 2 was stuck in recovery mode. i tried to connect it to itunes and restore but after downloading the file and extracting the software there is a pop up message that says "the device is full. Deleting files and emptying your recycle been will help you restore." how am i going to erase files if i can't open my ipad. i dont know what to do. Its been 2 days now. please help. thanks.

yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

When playing music from Ipod in my car, music suddenly stops and message appears to restore in iTunes. After a few minutes, it starts to play again. I hear a click and the apple logo shows on the screen. Any ideas??

You may need to do a Restore in iTunes.
Clicking sounds from an iPod that has a hard drive is probably not a good thing. It is possible that your iPod's hard drive is becoming unreliable.

No coverage after 'no service' message in known coverage area, No coverage after 'no service' message in known coverage area

Similar Messages

Maybe you are looking for