SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

Hi
I have SharePoint 2013 farm and installed Workflow Manager 1.0 and configured it and have been runing fine for several months. I upgraded this farm to SP 1 and then started having some issue with publish WF 2013 with task in SPD.
I re-Registered using Register-SPWorkflowService command and that fixed the problem and WorkFlow Manager running again OK. It has been couple of monthle and now I am having the problem again but with a different error on SPD
So doing what I did before, I tried to re-Registered WFM but this time getting the error below
Register-SPWorkflowService : The data or messaging layer is unavailable. Please retry
after 300 seconds.
The only possible resolution that I found is to add the -AllowOAuthHttp in my Register-SPWorkflowService cmdlet but that didnot not resolve the problem. I tried that anyway eventhough we do not allow http.
I did some checking for status and configuration and Get-SBFarmstatus showing all WFM services are running OK
I browsed to the WFM server https://servername:12290 and get the same error
- <Errorxmlns:i="http://www.w3.org/2001/XMLSchema-instance">
<Code>UnexpectedError</Code>
<Message>The data or messaging layer is unavailable. Please retry after 300
seconds.</Message>
</Error>
If anyone have advise / suggestion to resolve this issue, please share
Thanks in advance for all comments
Swanl

Hi Swanl,
Please refer to the article below for troubleshooting actions for workflow manager:
http://blogs.msdn.com/b/vincent_runge/archive/2014/01/07/troubleshooting-actions-for-sharepoint-2013-workflows.aspx
Moreover, activate workflow manager logs and see if there is any error message that could be help.
Regards,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected] .
Rebecca Tu
TechNet Community Support

Similar Messages

Clear Data Manager Package Error "The data file is empty."

Hi,
When I run the Clear data package in Data Manager, I receive the error "The data file is empty." I selected a very specific set of dimension values (none are calculated) and am on BPC 7.5 SP3. I subsequently turned on debugging to troubleshoot, but do not see any obvious issues leading the the error message. The log file with debugging turned on is below. Any help would be greatly appreciated!
Thanks.
Tom
TOTAL STEPS 3
1. Export_Zero: completed in 1 sec.
2. Load Cube: Failed in 0 sec.
3. Clear: completed in 0 sec.
[Selection]
ENABLETASK= Yes
CHECKLCK= Yes
(Member Selection)
Category: ACTUAL
Time: 2010.C_SEP
Affiliate: az_swhd
Account: Donor_DART_ID_1
Functional: Benchmark_F
Report: Cons
Restriction: AnyRestricted
[Messages]
The data file is empty. Please check the data file and try again.
[EvModifyScript Detail]
12-28-2010 17:30:05 - Debug turned ON
INFO(%TEMPFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, APPSET, ESMetrics)
TASK(EXPORT_ZERO, APP, CONSOLIDATED)
TASK(EXPORT_ZERO, USER, NESSGROUP\tbardwil)
TASK(EXPORT_ZERO, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(EXPORT_ZERO, SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
TASK(EXPORT_ZERO, DATATRANSFERMODE, 2)
TASK(LOAD CUBE, APPSET, ESMetrics)
TASK(LOAD CUBE, APP, CONSOLIDATED)
TASK(LOAD CUBE, USER, NESSGROUP\tbardwil)
TASK(LOAD CUBE, FILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(LOAD CUBE, DATATRANSFERMODE, 4)
TASK(LOAD CUBE, DMMCOPY, 0)
TASK(LOAD CUBE, PKGTYPE, 0)
TASK(LOAD CUBE, CHECKLCK, 1)
TASK(CLEAR COMMENTS, APPSET, ESMetrics)
TASK(CLEAR COMMENTS, APP, CONSOLIDATED)
TASK(CLEAR COMMENTS, USER, NESSGROUP\tbardwil)
TASK(CLEAR COMMENTS, DATATRANSFERMODE, 0)
TASK(CLEAR COMMENTS, SELECTIONORFILE, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp)
TASK(CLEAR COMMENTS, ENABLETASK, 1)
TASK(CLEAR COMMENTS, CHECKLCK, 1)
INFO(%ENABLETASK%, 1)
INFO(%CHECKLCK%, 1)
INFO(%SELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%TOSELECTION%, [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'))
INFO(%APPSET%, ESMetrics)
INFO(%APP%, CONSOLIDATED)
INFO(%CONVERSION_INSTRUCTIONS%, )
INFO(%FACTCONVERSION_INSTRUCTIONS%, )
INFO(%SELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\FROM_51_.TMP)
INFO(%TOSELECTIONFILE%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\TO_51_.TMP)
INFO(%DEFAULT_MEASURE%, PERIODIC)
INFO(%MEASURES%, Periodic,QTD,YTD)
INFO(%OLAPSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%SQLSERVER%, ETSCSAP047940.EASTER-SEALS.ORG)
INFO(%APPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\)
INFO(%DATAPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\DataFiles\)
INFO(%DATAROOTPATH%, C:\BPC\Data\WebFolders\)
INFO(%SELECTIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\SelectionFiles\)
INFO(%CONVERSIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\ConversionFiles\)
INFO(%TEMPPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\)
INFO(%LOGICPATH%, C:\BPC\Data\WebFolders\ESMetrics\Adminapp\CONSOLIDATED\)
INFO(%TRANSFORMATIONPATH%, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\TransformationFiles\)
INFO(%DIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time])
INFO(%FACTDIMS%, [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID])
INFO(%CATEGORY_DIM%, [Category])
INFO(%TIME_DIM%, [Time])
INFO(%ENTITY_DIM%, [Affiliate])
INFO(%ACCOUNT_DIM%, [Account])
INFO(%CURRENCY_DIM%, )
INFO(%APP_LIST%, Consolidated,ES_INC,GrantMgmt,LegalApp,LRate,Ownership,Rate)
INFO(%ACCOUNT_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_SET%, AZ_SWHD)
INFO(%CATEGORY_SET%, ACTUAL)
INFO(%FUNCTIONAL_SET%, BENCHMARK_F)
INFO(%REPORT_SET%, CONS)
INFO(%RESTRICTION_SET%, ANYRESTRICTED)
INFO(%TIME_SET%, 2010.C_SEP)
INFO(%ACCOUNT_TO_SET%, DONOR_DART_ID_1)
INFO(%AFFILIATE_TO_SET%, AZ_SWHD)
INFO(%CATEGORY_TO_SET%, ACTUAL)
INFO(%FUNCTIONAL_TO_SET%, BENCHMARK_F)
INFO(%REPORT_TO_SET%, CONS)
INFO(%RESTRICTION_TO_SET%, ANYRESTRICTED)
INFO(%TIME_TO_SET%, 2010.C_SEP)
INFO(DATAMGRGLOBALBPU, )
INFO(DATAMGRGLOBALCLIENTMACHINEID, ETSCWLT048794)
INFO(DATAMGRGLOBALERROR, )
INFO(DATAMGRGLOBALPACKAGEINFOR, )
INFO(DATAMGRGLOBALPACKAGENAME, C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\DataManager\PackageFiles\System Files/Clear.dtsx)
INFO(DATAMGRGLOBALSEQ, 51)
INFO(DATAMGRGLOBALSITEID, )
INFO(MODIFYSCRIPT, DEBUG(ON) PROMPT(SELECTINPUT,[CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED'),,"SELECT THE MEMBERS TO CLEAR",[Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[Time]) PROMPT(RADIOBUTTON,1,"DO YOU WANT TO CLEAR COMMENTS ASSOCIATED WITH DATA REGIONS IN BPC?",1,{"YES","NO"},{"1","0"}) PROMPT(RADIOBUTTON,1,"SELECT WHETHER TO CHECK WORK STATUS SETTINGS WHEN DELETING COMMENTS.",1,{"YES, DELETE COMMENTS WITH WORK STATUS SETTINGS","NO, DO NO DELETE COMMENTS WITH WORK STATUS SETTINGS"},{"1","0"}) INFO(C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempfdla_51_.tmp) TASK(EXPORT_ZERO,APPSET,ESMetrics) TASK(EXPORT_ZERO,APP,CONSOLIDATED) TASK(EXPORT_ZERO,USER,NESSGROUP\tbardwil) TASK(EXPORT_ZERO,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(EXPORT_ZERO,SQL,
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) TASK(EXPORT_ZERO,DATATRANSFERMODE,2) TASK(LOAD CUBE,APPSET,ESMetrics) TASK(LOAD CUBE,APP,CONSOLIDATED) TASK(LOAD CUBE,USER,NESSGROUP\tbardwil) TASK(LOAD CUBE,FILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(LOAD CUBE,DATATRANSFERMODE,4) TASK(LOAD CUBE,DMMCOPY,0) TASK(LOAD CUBE,PKGTYPE,0) TASK(LOAD CUBE,CHECKLCK,1) TASK(CLEAR COMMENTS,APPSET,ESMetrics) TASK(CLEAR COMMENTS,APP,CONSOLIDATED) TASK(CLEAR COMMENTS,USER,NESSGROUP\tbardwil) TASK(CLEAR COMMENTS,DATATRANSFERMODE,0) TASK(CLEAR COMMENTS,SELECTIONORFILE,C:\BPC\Data\WebFolders\ESMetrics\CONSOLIDATED\PrivatePublications\tbardwil\TempFiles\Tempwbh9_51_.tmp) TASK(CLEAR COMMENTS,ENABLETASK,1) TASK(CLEAR COMMENTS,CHECKLCK,1) BEGININFO(
select [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 as SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) as ZeroTable group by [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1)
) SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM ( SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFACTWBCONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED') UNION ALL SELECT [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID],0 AS SIGNEDDATA FROM TBLFAC2CONSOLIDATED WHERE [CATEGORY] in (N'ACTUAL') and [TIMEID] in (N'20100900') and [AFFILIATE] in (N'AZ_SWHD') and [ACCOUNT] in (N'DONOR_DART_ID_1') and [FUNCTIONAL] in (N'BENCHMARK_F') and [REPORT] in (N'CONS') and [RESTRICTION] in (N'ANYRESTRICTED')) AS ZEROTABLE GROUP BY [Account],[Affiliate],[Category],[Functional],[Report],[Restriction],[TIMEID] OPTION(MAXDOP 1) ENDINFO )
Edited by: Tom Bardwil on Dec 28, 2010 5:20 PM

You can greatly improve your chance of receiving a helpful answer to your question if you state the version (MS or NW) and the release (5.1, 7.0, 7.5) of BPC which you are using.
Also notice the sticky [note|Please do not post BPC, SSM or FI/CO questions here!; at the top of this forum whereby we announced new dedicated forums for BPC which are the proper place to post your questions regarding BPC in the future to be able to reach the right audience for your question.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Applications Regional Implementation Group (RIG)

How to configure workflow manager 1.0 ? Scenario "sharepoint 2013 and sql server 2012 workflow manager in one server" .

i have sharepoint 2013 and sql server 2012 in one server . how to configure workflow manager 1.0 on the same server ?

Please follow below technet article :
http://technet.microsoft.com/en-us/library/jj658588(v=office.15).aspx
Installing and Configuring Workflow Manager 1.0 (Step by Step)
Note: The steps in this article apply to SharePoint Server 2013.
The SharePoint 2013 Workflow platform is not supported in SharePoint Foundation 2013.
If my contribution helps you, please click Mark As Answer on that post and
Vote as Helpful
Thanks, ShankarSingh(MCP)

Pairing Workflow Manager with SharePoint Online

Hi everyone,
I found
this post by Adis Jugo and I wondered if this is (or maybe is planned to be) supported in SharePoint Online?
I created custom code activity, used it in workflow (sharepoint app) and it works on SP 2013. What I want to do, if it is possible ofc, is to use the same sharepoint app in SP Online..
This is the tutorial which was followed to create Workflow CodeActivity..

Hi Mahesh,
According to your description, my understanding is that you got an error when you register workflow manager for SharePoint 2013.
Firstly, please check whether you install SharePoint Developer tools Preview for VS 12. If yes, please uninstall it , and restart the server, then run Register-SPWorkflowService.
If this issue still exists, go to Central Administration, and check whether the web application is connected to Workflow service application proxy.
Here are some similar posts for you to take a look at:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/dcb16362-d93c-4f05-b0ba-7b4519caa541/sharepoint-2013-workflow-manager-error-when-i-register-workflow-service?forum=sharepointadmin
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f1482967-cd0f-4509-aa85-36ed4ba6e07d/error-during-register-workflow-service-2013?forum=sharepointadmin
http://sharepointdeal.wordpress.com/2013/07/08/register-spworkflowservice-failed-to-query-the-oauth-s2s-metadata-error/
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

I found my old ipod touch and it says the ipod is disabled and to connect it to itunes but when i try to connect it to itunes it says cannot connect cause ipod has passcode but i cant unlock passcode cause ipod disabled. Please anyone have an idea?

I found my old ipod touch and it says the ipod is disabled and to connect it to itunes but when i try to connect it to itunes it says cannot connect cause ipod has passcode but i cant unlock passcode cause ipod disabled. Please anyone have an idea?

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...

ITunes cannot connect to my iPhone4. Unknown error (0xE8000003).

iTunes cannot connect to my iPhone4. Unknown error (0xE8000003).

Another port of call for an error message (in addition to Anamusic's link) is Google. (More direct than our own search box).
There are many references to it, amongst them the link below.
Using Msconfig to troubleshoot conflicts in Windows XP

ITunes Cannot connect to iPhone due to unknown error (0xE8000065)

Hello!
When I plugin my iphone to a wall, it refuses to charge (it just keeps making a bleeping noise).
And when I try to connect my iPhone to iTunes, I can't. It just says: iTunes Cannot connect to iPhone due to unknown error (0xE8000065)
Any suggestions? I replaced the battery hoping that would do the trick, but nada.
Cheers

iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting
Did you try a different charger and a different cable? If it won't charge the error will go away soon also when the battery dies.

Hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!

hello! i am using ipad n i am not able to connect to itunes store.Whenever i open itunes it syas "cannot connect to itunes store".i tried resetting the network settings n also tried changing the dat and time settings as mentioned but it still doesnt work!please help!

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
 Cheers, Tom

Ada cannot connect to adobe...showing error 100

ada cannot connect to adobe...showing error 100

Have Ada meet Adobe at the coffee shop in San Jose around the corner from the corporate offices
More seriously, what is ada? What version of Adobe Reader are you trying to use? What OS and/or device are you running Reader on? Adobe Reader runs on Macs, PCs, cell phones, etc. More information is needed.

HT1212 my ipad just died. When i hook up to my computer on itunes it says cannot connect because it is locked with a passcode. i know my passcode but nothing is coming on, the screen is just blank and it is was fully charged

My ipad will not turn on. It was fully charged before it just died and would not turn back on. When I hook it up to my computer on itunes it says cannot connect because it is locked with a passcode. I know my passcode but the screen is just black, no power, so I cannot enter a pass code.

FORCE IPAD INTO RECOVERY MODE
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
ON COMPUTER
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. Select "Restore iPad"...

Itunes cannot connect to this iphone an unknown error has occured. Please help.

Hi,
I have just got an iphone 5c. However i'm having trouble with my itunes on my laptop.
I'm getting 2 error messages:
Error message 1 is ( an unknown error occured 42032 ) this happens every time i open itunes.
Error message 2 is ( itunes cannot connect to this iphone, an unknown error has occured ) this happens every time i try to connect my new phone.
I am running the latest itunes version on windows 7.
So far i've tried uninstalling all components and reinstalling them to no avail.
I've spent 3 hours today on the phone to both Apple and Microsoft with both blaming each other.
Please someone help.
Kind regards
Dale

Hi prolough,
Here is a link that should help:
http://support.apple.com/kb/TS3221
Cheers,
GB

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Hi, My problem is I cannot connect my apple tv to my account, the user name and password are definitely correct, I upgraded the software, reset the device, but no chance. What should I do?

Try this:
Reboot device by pressing both the home button and sleep/wake (power) buttons at the same time for 10-15 seconds until the apple logo appears on the screen, then let go.
If that doesn't work then reset the device by going to settings/general/reset/reset all settings (or for network connection issues 'reset network settings').
(no media or data will be deleted from the device, this will only take a minute).

HT3529 cannot connect to itunes store from iphone error message

cannot connect to itunes store from iphone error message

More than likely its your router. You need to make sure that the router's firewall, if enabled(most are by default), permits connection to these domains as trusted:
* itunes.apple.com
* ax.itunes.apple.com
* albert.apple.com
* gs.apple.com
This article may prove helpful in identifying the problem:
http://support.apple.com/kb/HT3501

HT203175 itunes cannot connect to tunes store an unnone error occured( 0x80090318)

itunes cannot connect to tunes store an unnone error occured(0x80090318)

Hey there Arogarch,
It sounds like you are getting this error code when trying to access the iTunes Store. This specific error is referenced in the article named:
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123
Thank you for using Apple Support Communities.
Cheers,
Sterling

SharePoint 2013 - Cannot connect or Register WorkFlow Manager with error "The data or messaging layer is unavailable. Please retry after 300 seconds"

Similar Messages

Maybe you are looking for