No Cursor at the Start for T440s
I bought the T440s slightly over one year ago. Everything was fine till one week ago. When I start or restart my laptop, there is no cursor in about 60% to 70% of chances. If there is no cursor on the startup screen, the plain screen with time and date, after managing login into my account into my regular desktop, there is still no cursor on the desktop. I have to shut down or restart, sometime for several times, to found the chance that the cursor is comig out.
My system came with Window 8.0, and was upgraded to 8.1 about one year ago.
How can I solve this problem?
pingke wrote:
I bought the T440s slightly over one year ago. Everything was fine till one week ago. When I start or restart my laptop, there is no cursor in about 60% to 70% of chances. If there is no cursor on the startup screen, the plain screen with time and date, after managing login into my account into my regular desktop, there is still no cursor on the desktop. I have to shut down or restart, sometime for several times, to found the chance that the cursor is comig out.
My system came with Window 8.0, and was upgraded to 8.1 about one year ago.
How can I solve this problem?
Just want ot clarify a little bit: My T440s was loaded with Windows 8.0 Pro, which was upgraded to Window 8.1 Pro one years ago. Below is the updated message:
I bought the T440s slightly over one year ago. Everything was fine till one week ago. When I start or restart my laptop, there is no cursor in about 60% to 70% of chances. If there is no cursor on the startup screen, the plain screen with time and date, after managing login into my account into my regular desktop, there is still no cursor on the desktop. I have to shut down or restart, sometime for several times, to found the chance that the cursor is comig out.
My system came with Window 8.0 Pro, and was upgraded to 8.1 Pro about one year ago.
How can I solve this problem?
Similar Messages
-
hi .after up dating my iphon5 to ios 8.1 and 8.1.1 my main cam dot wrong.dost not work correctly.the cam frizzing at the start for 10 sec.but second cam working normally.
I hate being the bearer of bad news, but from what I have read on the Forum and FAQ, you will need to un-install Network Magic from all of your computers making sure that no NM settings folders are left behind under users. Then unplug all wired computers and rebuild your network by re-installing NM in each computer before connecting it to your router. After you have added all of your wired computers, set up your wireless network and install NM and add each wireless computer.
That is a lot of work. I hope this helps.
Gary -
Since downloading Firefox 4, I am having problems archiving gmail conversations from my inbox view (either one or several conversations) as it says "No Conversations Selected" when I have selected one or several. Also, when I go to enter a new event in google calendar, I have to click the cursor in the box to type the event (it used to let me just start typing) or else it flips out and starts jumping to day view or another month. Does anyone know how to fix either of these?
I have had this problem; but while trying to fix another problem, I reset my preferences for Firefox and it fixed this problem as well. To reset preferences, follow this link: http://support.mozilla.com/en-US/kb/Resetting%20preferences
-
When watching youtube the video randomly jumps to the start of the video even if the cursor is not on the video. This happens randomly and does not seem to be a problem with the videos as they run fine. what is going on?
Several times every day YouTube shuts down some of their servers to update stuff. Be patient if YouTube is slow, stuck or mangled. Transmissions from YouTube to your computer are done in multiple tiny packets of data and flash at a time. That's why sometimes you may get any of these scenarios: bits and pieces of text/thumbnails in weird places; sluggish loading/buffering; the spinning circle going on forever; or the player being blank. This problem could fix itself within a few hours or by the next day.
If your YouTube continues to behave slow, stuck or strange, it's very possible that your directories of "temporary internet files" and RAM (sometimes known as "cache") are close to the maximum and just cannot take anymore, the end result being any of the above scenarios or videos that: A) come to a complete freeze; B) start/stop/start/stop in a choppy way; or C) never even make it onto your screen.
"Temporary internet files" are tiny bits of webpages that get permanently put on your hard-drive. They will remain forever on your computer, gradually plugging it up like hair stuck in a sink drain, until you finally get rid of them once and for all. Thus, exit out of YouTube, then clear your "cache" of all its "temporary internet files", "cookies" and "history". It is best if you shutdown and reboot afterwards. You'll be amazed at how "fresh" and "new" your YouTube will be. -
Ref cursor stopped returning values for the output.
Hi Everyone,
My DB version is
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bi
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Please do have a look at the code, and let me know where I've gone wrong, because select query is fetching data. Previously procedure was returning values too through ref cursor. Please correct me where I've gone wrong.
create or replace
PROCEDURE
SPL_SPN_MISSING_EMR_AOE_DTL (IN_PATIENT_ID NUMBER,
IN_FACILITY_ID NUMBER,
IN_DRAW_DT DATE,
IN_REQUISITION_NUMBER ORDER_REQUISITION_HEADER.REQUISITION_NUMBER%TYPE,
IN_CORP_ACRONYM CORPORATION.CORPORATION_ACRONYM%TYPE,
IN_ABCDEF_MRN PATIENT.ABCDEF_MRN%TYPE,
IN_ACCOUNT_NUMBER FACILITY_ACCOUNT_DETAIL.ACCOUNT_NUMBER%TYPE,
IN_HLAB_NUM FACILITY_ACCOUNT_DETAIL.HLAB_NUM%TYPE,
OV_COMMENTS OUT VARCHAR2,
OR_QUES_AND_ANS OUT SYS_REFCURSOR) AS
* Copyright (C) 2013 ABCDEF Laboratories
* All Rights Reserved
* This Work Contains Trade Secrets And Confidential Material Of
* ABCDEF Laboratories., And Its Use Of Disclosure In Whole Or In Part
* Without Express Written Permission Of ABCDEF Laboratories Is Prohibited.
* Company : ABCDEF Laboratories
* Project : ABCDEF Scorpion
* Name : SPL_SPN_MISSING_EMR_AOE_DTL
* In Parameters : In_Patient_Id Number
* In_Facility_Id Number
* In_Draw_Dt Date
* In_Requisition_Number Order_Requisition_Header.Requisition_Number%Type,
* In_Corp_Acronym Corporation.Corporation_Acronym%Type
* In_ABCDEF_Mrn Patient.ABCDEF_Mrn%Type
* In_Account_Number Facility_Account_Detail.Account_Number%Type
* In_Hlab_Num Facility_Account_Detail.Hlab_Num%Type
* Out Parameters : OV_COMMENTS Out Varchar2
* OR_QUES_AND_ANS Out Sys_Refcursor
* Description : This Procedure Will Fetch The Mising Emr Aoe Detail And Provide
* Necessary Comments As Well.
* Modification History :
* Date Version No. Author Description
* 21/01/2014 1.0 ABCDEF Initial Version
* 27/01/2014 1.1 ABCDEF Restricted the output for duplicate questions
* and answers, partially answered AOE. Also renamed
* the output variable names.
CC_PACKAGE_NAME CONSTANT VARCHAR2(50) := 'SPL_SPN_MISSING_EMR_AOE_DTL';
CC_PROCEDURE_NAME CONSTANT VARCHAR2(50) := 'SPL_SPN_MISSING_EMR_AOE_DTL';
VC_AVL_PAT_QUES VARCHAR2(1000);
VC_DUP_PAT_QUES VARCHAR2(1000);
VC_ACTUAL_QUES VARCHAR2(1000);
VC_ACTUAL_QUES_CNT NUMBER:= 0;
VR_QUES_AND_ANS SYS_REFCURSOR;
VN_AVL_PAT_QUES_CNT NUMBER := 0;
VN_DUP_PAT_QUES_CNT NUMBER := 0;
VN_EXACT_PAT_ID_CNT NUMBER := 0;
VN_DUPL_PAT_ID NUMBER := 0;
VN_EXTERNAL_ID PATIENT.EXTERNAL_ID%TYPE;
VC_OBX_QUES VARCHAR2(1000);
VC_OBX_QUES_CNT NUMBER := 0;
VN_OBX_QUES_CNT NUMBER := 0;
PAT_EXTERNAL_ID PATIENT.EXTERNAL_ID%TYPE;
VC_EXACT_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_EXACT_PAR_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_DUPL_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_DUPL_PAR_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_REJECTED_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_REJECTED_PAR_BOOLEAN_VAL VARCHAR2(10) := 'FALSE';
VC_COMMENTS VARCHAR2(100);
VC_PAR_COMMENTS VARCHAR2(100);
VC_RETURN_EXACT_PAT CHAR(1) := 'N';
VC_RETURN_DUPL_PAT CHAR(1) := 'N';
VC_RETURN_REJECT_PAT CHAR(1) := 'N';
VC_CHK_FOR_EXT_ID CHAR(1) := 'N';
VN_MAX_MSG_ID INTERFACE_A04_OBX_SEGMENT.MSG_ID%TYPE;
VN_MAX_COUNT NUMBER := 0;
VN_ITERATION_RUN NUMBER := 0;
BEGIN
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'Start of the procedure with Patient_Id:'||IN_PATIENT_ID||' Facility_Id:'||IN_FACILITY_ID||
' Draw_Dt:'||IN_DRAW_DT||' Requisition_Number:'||IN_REQUISITION_NUMBER||' Corp_Acronym:'||IN_CORP_ACRONYM||
' ABCDEF_Mrn:'||IN_ABCDEF_MRN||' Account_Number:'||IN_ACCOUNT_NUMBER||' Hlab_Num:'||IN_HLAB_NUM);
<<AOE_TEST_LOOP>>
FOR AOE_REC IN (SELECT ORD.TEST_ID
FROM ORDER_REQUISITION_DETAIL ORD
WHERE ORD.REQUISITION_HDR_ID = (SELECT ORH.REQUISITION_HDR_ID
FROM ORDER_REQUISITION_HEADER ORH
WHERE ORH.REQUISITION_NUMBER = IN_REQUISITION_NUMBER)
AND ORD.TEST_CODE IN (SELECT TEST_CODE FROM INTERFACE_ADT_AOE_MASTER WHERE SOURCE_SYSTEM = IN_CORP_ACRONYM))
LOOP
VN_ITERATION_RUN := VN_ITERATION_RUN + 1;
SELECT COUNT(DISTINCT PATIENT_ID)
INTO VN_EXACT_PAT_ID_CNT
FROM EMR_ADTAOE_DTL
WHERE PATIENT_ID = IN_PATIENT_ID
AND TEST_ID = AOE_REC.TEST_ID
AND FACILITY_ID = IN_FACILITY_ID
AND (DRAW_DATE = IN_DRAW_DT
OR DRAW_DATE = TO_DATE('2999/12/31','YYYY/MM/DD'))
AND SOURCE_SYSTEM = IN_CORP_ACRONYM ;
--Collecting all questions in interface_adt_aoe_master
SELECT STRAGG(SUB1.QUESTION_CODE), COUNT(SUB1.QUESTION_CODE)
INTO VC_ACTUAL_QUES, VC_ACTUAL_QUES_CNT
FROM (SELECT DISTINCT QUESTION_CODE FROM INTERFACE_ADT_AOE_MASTER
WHERE TEST_CODE = (SELECT TEST_CODE FROM TEST WHERE TEST_ID = AOE_REC.TEST_ID)
AND SOURCE_SYSTEM = IN_CORP_ACRONYM
ORDER BY QUESTION_CODE) SUB1;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_actual_ques:'||VC_ACTUAL_QUES ||
' vn_exact_pat_id_cnt:'||VN_EXACT_PAT_ID_CNT||
' aoe_rec.test_id:'||AOE_REC.TEST_ID||
' VN_ITERATION_RUN:'||VN_ITERATION_RUN);
<<MAIN_IF_BLOCK>>
IF
VN_EXACT_PAT_ID_CNT = 1 AND
VN_ITERATION_RUN >= 1 THEN
--Collecting avaliable questions in emr_adtaoe_dtl
SELECT STRAGG(SUB.QUESTION_CODE), COUNT(DISTINCT SUB.QUESTION_CODE)
INTO VC_AVL_PAT_QUES, VN_AVL_PAT_QUES_CNT
FROM (SELECT DISTINCT QUESTION_CODE FROM EMR_ADTAOE_DTL
WHERE TEST_ID = AOE_REC.TEST_ID
AND PATIENT_ID = IN_PATIENT_ID
AND FACILITY_ID = IN_FACILITY_ID
AND (DRAW_DATE = IN_DRAW_DT
OR DRAW_DATE = TO_DATE('2999/12/31','YYYY/MM/DD'))
AND SOURCE_SYSTEM = IN_CORP_ACRONYM
AND ANSWER IS NOT NULL
ORDER BY QUESTION_CODE) SUB;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_avl_pat_ques:'||VC_AVL_PAT_QUES||
' vn_avl_pat_ques_cnt:'||VN_AVL_PAT_QUES_CNT);
<<CASE_1_AND_2>>
IF
VC_AVL_PAT_QUES = VC_ACTUAL_QUES THEN
VC_EXACT_BOOLEAN_VAL := 'TRUE';
VC_COMMENTS := 'AOE AVAILABLE';
ELSIF--<<case_1_and_2>>
(VC_AVL_PAT_QUES != VC_ACTUAL_QUES OR VC_AVL_PAT_QUES IS NULL) AND
VN_AVL_PAT_QUES_CNT >= 0 THEN
VC_EXACT_PAR_BOOLEAN_VAL := 'TRUE';
VC_PAR_COMMENTS := 'PARTIAL AOE AVAILABLE';
END IF;--<<case_1_and_2>>
ELSIF
VN_EXACT_PAT_ID_CNT = 0 AND
VN_ITERATION_RUN > 1 THEN
VC_EXACT_PAR_BOOLEAN_VAL := 'TRUE';
VC_PAR_COMMENTS := 'PARTIAL AOE AVAILABLE';
ELSIF--<<Main_if_block>>
VN_EXACT_PAT_ID_CNT = 0 THEN
<<DUPL_PAT_LOOP>>
FOR PAT_ID_REC IN(SELECT DISTINCT PATIENT_ID
FROM PATIENT P
WHERE P.ABCDEF_MRN = IN_ABCDEF_MRN
AND EXISTS(SELECT 1 FROM EMR_ADTAOE_DTL EAD
WHERE EAD.PATIENT_ID = P.PATIENT_ID
AND EAD.TEST_ID = AOE_REC.TEST_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (EAD.DRAW_DATE = IN_DRAW_DT
OR EAD.DRAW_DATE = TO_DATE('2999/12/31','YYYY/MM/DD'))
AND EAD.SOURCE_SYSTEM = IN_CORP_ACRONYM)
AND P.PATIENT_ID != IN_PATIENT_ID)
LOOP
--Collecting avaliable questions in emr_adtaoe_dtl
SELECT STRAGG(SUB.QUESTION_CODE), COUNT(QUESTION_CODE)
INTO VC_DUP_PAT_QUES, VN_DUP_PAT_QUES_CNT
FROM (SELECT QUESTION_CODE FROM EMR_ADTAOE_DTL
WHERE TEST_ID = AOE_REC.TEST_ID
AND PATIENT_ID = PAT_ID_REC.PATIENT_ID
AND FACILITY_ID = IN_FACILITY_ID
AND (DRAW_DATE = IN_DRAW_DT
OR DRAW_DATE = TO_DATE('2999/12/31','YYYY/MM/DD'))
AND SOURCE_SYSTEM = IN_CORP_ACRONYM
AND ANSWER IS NOT NULL
ORDER BY QUESTION_CODE) SUB;
<<CASE_3_AND_4>>
IF
VC_DUP_PAT_QUES = VC_ACTUAL_QUES THEN
VC_DUPL_BOOLEAN_VAL := 'TRUE';
VC_COMMENTS := 'AOE AVAILABLE FOR DUPLICATE PATIENT';
ELSIF
VC_DUP_PAT_QUES != VC_ACTUAL_QUES AND
VN_DUP_PAT_QUES_CNT >= 0 THEN
VC_DUPL_PAR_BOOLEAN_VAL := 'TRUE';
VC_PAR_COMMENTS := 'PARTIAL AOE AVAILABLE FOR DUPLICATE PATIENT';
END IF;--<<case_3_and_4>>
VN_DUPL_PAT_ID := PAT_ID_REC.PATIENT_ID;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_dup_pat_ques:'||VC_DUP_PAT_QUES||
' vn_dup_pat_ques_cnt:'||VN_DUP_PAT_QUES_CNT||
' VC_COMMENTS:'||VC_COMMENTS||
' VC_PAR_COMMENTS:'||VC_PAR_COMMENTS);
END LOOP DUPL_PAT_LOOP;
VC_CHK_FOR_EXT_ID := 'Y';
IF
VC_CHK_FOR_EXT_ID = 'Y' THEN
<<EXTERNAL_ID_LOOP>>
FOR P_PAT_EXT_ID_REC IN (SELECT DISTINCT P.EXTERNAL_ID
FROM PATIENT P
WHERE P.ABCDEF_MRN = IN_ABCDEF_MRN
AND P.EXTERNAL_ID IS NOT NULL)
LOOP
INSERT INTO TT_A04_OBX_QUES_ANS_DTL
(SELECT IAOBX.MSG_ID, IAOBX.OBSERVATION_IDENTIFIER, IAOBX.OBSERVATION_VALUE, IAM.UOM
FROM INTERFACE_A04_OBX_SEGMENT IAOBX, INTERFACE_ADT_AOE_MASTER IAM
WHERE IAOBX.OBSERVATION_IDENTIFIER = IAM.QUESTION_CODE
AND (IAOBX.OBSERVATION_DTM = TO_CHAR(IN_DRAW_DT,'YYYYMMDD')
OR IAOBX.OBSERVATION_DTM = TO_CHAR(TO_DATE('2999/12/31','YYYY/MM/DD'),'YYYYMMDD'))
AND IAOBX.MSG_ID IN (SELECT IPID.MSG_ID
FROM INTERFACE_A04_PID_SEGMENT IPID
WHERE IPID.PATIENT_ID_EXTERNAL = P_PAT_EXT_ID_REC.EXTERNAL_ID
AND IPID.MSG_ID IN (SELECT IMSH.MSG_ID
FROM INTERFACE_A04_MSH_SEGMENT IMSH
WHERE (TRIM('W' FROM SUBSTR(IMSH.SENDING_FACILITY,5,LENGTH(IMSH.SENDING_FACILITY))) = IN_ACCOUNT_NUMBER
OR SUBSTR(IMSH.SENDING_FACILITY,2,LENGTH(IMSH.SENDING_FACILITY)) = IN_HLAB_NUM))));
BEGIN
SELECT STRAGG(SUB3.OBSERVATION_IDENTIFIER), COUNT(OBSERVATION_IDENTIFIER)
INTO VC_OBX_QUES, VC_OBX_QUES_CNT
FROM (SELECT DISTINCT OBSERVATION_IDENTIFIER
FROM TT_A04_OBX_QUES_ANS_DTL
ORDER BY OBSERVATION_IDENTIFIER)SUB3;
IF
VC_OBX_QUES = VC_ACTUAL_QUES THEN
VC_COMMENTS := 'AOE RECEIVED IN A REJECTED ADT';
VC_REJECTED_BOOLEAN_VAL := 'TRUE';
ELSIF
VC_OBX_QUES != VC_ACTUAL_QUES AND
VC_OBX_QUES_CNT > 0 THEN
VC_PAR_COMMENTS := 'PARTIAL AOE RECEIVED IN A REJECTED ADT';
VC_REJECTED_PAR_BOOLEAN_VAL := 'TRUE';
END IF;
VN_EXTERNAL_ID := P_PAT_EXT_ID_REC.EXTERNAL_ID;
EXCEPTION
WHEN NO_DATA_FOUND THEN
VC_REJECTED_BOOLEAN_VAL := 'FALSE';
VC_REJECTED_PAR_BOOLEAN_VAL := 'FALSE';
END;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_obx_ques:'||VC_OBX_QUES||
' vc_obx_ques_cnt:'||VC_OBX_QUES_CNT);
END LOOP EXTERNAL_ID_LOOP;
END IF;
END IF;--<<Main_if_block>>
END LOOP AOE_TEST_LOOP;
--Returning output as per the execution result.
IF
VC_EXACT_BOOLEAN_VAL = 'TRUE' AND
VC_EXACT_PAR_BOOLEAN_VAL = 'FALSE' THEN
OV_COMMENTS := VC_COMMENTS;
VC_DUPL_BOOLEAN_VAL := NULL;
VC_DUPL_PAR_BOOLEAN_VAL := NULL;
VC_REJECTED_BOOLEAN_VAL := NULL;
VC_REJECTED_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_EXACT_PAT := 'Y';
ELSIF
--VC_EXACT_BOOLEAN_VAL = 'TRUE' AND
VC_EXACT_PAR_BOOLEAN_VAL = 'TRUE' THEN
OV_COMMENTS := VC_PAR_COMMENTS;
VC_DUPL_BOOLEAN_VAL := NULL;
VC_DUPL_PAR_BOOLEAN_VAL := NULL;
VC_REJECTED_BOOLEAN_VAL := NULL;
VC_REJECTED_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_EXACT_PAT := 'Y';
END IF;
IF
VC_RETURN_EXACT_PAT = 'Y' THEN
--Returning result set (OV_COMMENTS,Question and Answer) for the exact patient.(Case 1 (AOE) and 2 (PARTIAL AOE))
SELECT MAX (SUB.COUNT_QUES_ANS)
INTO VN_MAX_COUNT FROM (SELECT COUNT(*) OVER (PARTITION BY EAD.QUESTION_CODE, EAD.ANSWER) AS COUNT_QUES_ANS
FROM EMR_ADTAOE_DTL EAD , INTERFACE_ADT_AOE_MASTER IAM, TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = IN_PATIENT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_REQUISITION_NUMBER) SUB;
IF
VN_MAX_COUNT > 1 THEN
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'exact patient duplicate scenario'||' vn_max_count:'||VN_MAX_COUNT);
OPEN VR_QUES_AND_ANS FOR
SELECT DISTINCT IAM.QUESTION_CODE,
(SELECT DISTINCT CASE
WHEN EAD.ANSWER IS NULL THEN NULL
WHEN LENGTH(TRIM(TRANSLATE(EAD.ANSWER, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', ' '))) IS NULL THEN EAD.ANSWER
ELSE TO_CHAR(TRUNC(EAD.ANSWER * DECODE(UPPER(IAM.UOM), 'KGS', 2.20462,1),2))
END
FROM EMR_ADTAOE_DTL EAD , TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = IN_PATIENT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD.ANSWER IS NOT NULL
AND EAD.STATUS = DECODE(IAM.MATCH_TYPE, 'AT', EAD.STATUS, 'N')
) AS ANSWER
FROM INTERFACE_ADT_AOE_MASTER IAM
WHERE IAM.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND IAM.TEST_CODE IN (SELECT ORD.TEST_CODE
FROM ORDER_REQUISITION_DETAIL ORD
WHERE ORD.REQUISITION_HDR_ID = (SELECT ORH.REQUISITION_HDR_ID
FROM ORDER_REQUISITION_HEADER ORH
WHERE ORH.REQUISITION_NUMBER = IN_REQUISITION_NUMBER)
AND EXISTS (SELECT 1 FROM EMR_ADTAOE_DTL EAD1, INTERFACE_ADT_AOE_MASTER IAM1, TEST T1
WHERE ORD.TEST_ID = EAD1.TEST_ID
AND IAM1.TEST_CODE = T1.TEST_CODE
AND EAD1.SOURCE_SYSTEM = IAM1.SOURCE_SYSTEM
AND EAD1.QUESTION_CODE = IAM1.QUESTION_CODE
AND EAD1.PATIENT_ID = IN_PATIENT_ID
AND EAD1.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD1.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD1.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD1.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD1.ANSWER IS NOT NULL
AND EAD1.STATUS = DECODE(IAM1.MATCH_TYPE, 'AT', EAD1.STATUS, 'N')));
ELSIF
VN_MAX_COUNT = 1 THEN
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'exact patient unique scenario'||' vn_max_count:'||VN_MAX_COUNT);
OPEN VR_QUES_AND_ANS FOR
SELECT DISTINCT IAM.QUESTION_CODE,
(SELECT DISTINCT CASE
WHEN EAD.ANSWER IS NULL THEN NULL
WHEN LENGTH(TRIM(TRANSLATE(EAD.ANSWER, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', ' '))) IS NULL THEN EAD.ANSWER
ELSE TO_CHAR(TRUNC(EAD.ANSWER * DECODE(UPPER(IAM.UOM), 'KGS', 2.20462,1),2))
END
FROM EMR_ADTAOE_DTL EAD , TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = IN_PATIENT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD.ANSWER IS NOT NULL
AND EAD.STATUS = DECODE(IAM.MATCH_TYPE, 'AT', EAD.STATUS, 'N')
) AS ANSWER
FROM INTERFACE_ADT_AOE_MASTER IAM
WHERE IAM.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND IAM.TEST_CODE IN (SELECT ORD.TEST_CODE
FROM ORDER_REQUISITION_DETAIL ORD
WHERE ORD.REQUISITION_HDR_ID = (SELECT ORH.REQUISITION_HDR_ID
FROM ORDER_REQUISITION_HEADER ORH
WHERE ORH.REQUISITION_NUMBER = IN_REQUISITION_NUMBER));
END IF;
OR_QUES_AND_ANS := VR_QUES_AND_ANS;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_exact_boolean_val:'||VC_EXACT_BOOLEAN_VAL||
' vc_exact_par_boolean_val:'||VC_EXACT_PAR_BOOLEAN_VAL||
' OV_COMMENTS:'||OV_COMMENTS);
END IF;
IF
VC_DUPL_BOOLEAN_VAL = 'TRUE' AND
VC_DUPL_PAR_BOOLEAN_VAL = 'FALSE' THEN
OV_COMMENTS := VC_COMMENTS;
VC_EXACT_BOOLEAN_VAL := NULL;
VC_EXACT_PAR_BOOLEAN_VAL := NULL;
VC_REJECTED_BOOLEAN_VAL := NULL;
VC_REJECTED_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_DUPL_PAT := 'Y';
ELSIF
--VC_DUPL_BOOLEAN_VAL = 'TRUE' AND
VC_DUPL_PAR_BOOLEAN_VAL = 'TRUE' THEN
OV_COMMENTS := VC_PAR_COMMENTS;
VC_EXACT_BOOLEAN_VAL := NULL;
VC_EXACT_PAR_BOOLEAN_VAL := NULL;
VC_REJECTED_BOOLEAN_VAL := NULL;
VC_REJECTED_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_DUPL_PAT := 'Y';
END IF;
IF
VC_RETURN_DUPL_PAT = 'Y' THEN
--Returning result set (OV_COMMENTS,Question and Answer) for the duplicate patient.(Case 3 (AOE) and 4 (PARTIAL AOE))
SELECT MAX (SUB.COUNT_QUES_ANS)
INTO VN_MAX_COUNT FROM (SELECT COUNT(*) OVER (PARTITION BY EAD.QUESTION_CODE, EAD.ANSWER) AS COUNT_QUES_ANS
FROM EMR_ADTAOE_DTL EAD , INTERFACE_ADT_AOE_MASTER IAM, TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = VN_DUPL_PAT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_REQUISITION_NUMBER) SUB;
IF
VN_MAX_COUNT > 1 THEN
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'duplicate patient duplicate scenario'||' vn_max_count:'||VN_MAX_COUNT);
OPEN VR_QUES_AND_ANS FOR
SELECT DISTINCT IAM.QUESTION_CODE,
(SELECT DISTINCT CASE
WHEN EAD.ANSWER IS NULL THEN NULL
WHEN LENGTH(TRIM(TRANSLATE(EAD.ANSWER, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', ' '))) IS NULL THEN EAD.ANSWER
ELSE TO_CHAR(TRUNC(EAD.ANSWER * DECODE(UPPER(IAM.UOM), 'KGS', 2.20462,1),2))
END
FROM EMR_ADTAOE_DTL EAD , TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = VN_DUPL_PAT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD.ANSWER IS NOT NULL
AND EAD.STATUS = DECODE(IAM.MATCH_TYPE, 'AT', EAD.STATUS, 'N')
) AS ANSWER
FROM INTERFACE_ADT_AOE_MASTER IAM
WHERE IAM.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND IAM.TEST_CODE IN (SELECT ORD.TEST_CODE
FROM ORDER_REQUISITION_DETAIL ORD
WHERE ORD.REQUISITION_HDR_ID = (SELECT ORH.REQUISITION_HDR_ID
FROM ORDER_REQUISITION_HEADER ORH
WHERE ORH.REQUISITION_NUMBER = IN_REQUISITION_NUMBER)
AND EXISTS (SELECT 1 FROM EMR_ADTAOE_DTL EAD1, INTERFACE_ADT_AOE_MASTER IAM1, TEST T1
WHERE ORD.TEST_ID = EAD1.TEST_ID
AND IAM1.TEST_CODE = T1.TEST_CODE
AND EAD1.SOURCE_SYSTEM = IAM1.SOURCE_SYSTEM
AND EAD1.QUESTION_CODE = IAM1.QUESTION_CODE
AND EAD1.PATIENT_ID = VN_DUPL_PAT_ID
AND EAD1.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD1.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD1.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD1.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD1.ANSWER IS NOT NULL
AND EAD1.STATUS = DECODE(IAM1.MATCH_TYPE, 'AT', EAD1.STATUS, 'N')));
ELSIF
VN_MAX_COUNT = 1 THEN
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'duplicate patient unique scenario'||' vn_max_count:'||VN_MAX_COUNT);
OPEN VR_QUES_AND_ANS FOR
SELECT DISTINCT IAM.QUESTION_CODE,
(SELECT DISTINCT CASE
WHEN EAD.ANSWER IS NULL THEN NULL
WHEN LENGTH(TRIM(TRANSLATE(EAD.ANSWER, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', ' '))) IS NULL THEN EAD.ANSWER
ELSE TO_CHAR(TRUNC(EAD.ANSWER * DECODE(UPPER(IAM.UOM), 'KGS', 2.20462,1),2))
END
FROM EMR_ADTAOE_DTL EAD , TEST T
WHERE T.TEST_ID = EAD.TEST_ID
AND IAM.TEST_CODE = T.TEST_CODE
AND EAD.SOURCE_SYSTEM = IAM.SOURCE_SYSTEM
AND EAD.QUESTION_CODE = IAM.QUESTION_CODE
AND EAD.PATIENT_ID = VN_DUPL_PAT_ID
AND EAD.FACILITY_ID = IN_FACILITY_ID
AND (TRUNC(EAD.DRAW_DATE) = IN_DRAW_DT
OR TRUNC(EAD.DRAW_DATE) = TRUNC(TO_DATE('12-31-2999','mm-dd-yyyy')))
AND EAD.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND EAD.ANSWER IS NOT NULL
AND EAD.STATUS = DECODE(IAM.MATCH_TYPE, 'AT', EAD.STATUS, 'N')
) AS ANSWER
FROM INTERFACE_ADT_AOE_MASTER IAM
WHERE IAM.SOURCE_SYSTEM = IN_CORP_ACRONYM
AND IAM.TEST_CODE IN (SELECT ORD.TEST_CODE
FROM ORDER_REQUISITION_DETAIL ORD
WHERE ORD.REQUISITION_HDR_ID = (SELECT ORH.REQUISITION_HDR_ID
FROM ORDER_REQUISITION_HEADER ORH
WHERE ORH.REQUISITION_NUMBER = IN_REQUISITION_NUMBER));
END IF;
OR_QUES_AND_ANS := VR_QUES_AND_ANS;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_dup_pat_ques:'||VC_DUP_PAT_QUES||
' vc_dupl_boolean_val:'||VC_DUPL_BOOLEAN_VAL||
' vc_dupl_par_boolean_val:'||VC_DUPL_PAR_BOOLEAN_VAL||
' OV_COMMENTS:'||OV_COMMENTS);
END IF;
IF
VC_REJECTED_BOOLEAN_VAL = 'TRUE' AND
VC_REJECTED_PAR_BOOLEAN_VAL = 'FALSE' THEN
OV_COMMENTS := VC_COMMENTS;
VC_EXACT_BOOLEAN_VAL := NULL;
VC_EXACT_PAR_BOOLEAN_VAL := NULL;
VC_DUPL_BOOLEAN_VAL := NULL;
VC_DUPL_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_REJECT_PAT := 'Y';
ELSIF
--VC_REJECTED_BOOLEAN_VAL = 'FALSE' AND
VC_REJECTED_PAR_BOOLEAN_VAL = 'TRUE' THEN
OV_COMMENTS := VC_PAR_COMMENTS;
VC_EXACT_BOOLEAN_VAL := NULL;
VC_EXACT_PAR_BOOLEAN_VAL := NULL;
VC_DUPL_BOOLEAN_VAL := NULL;
VC_DUPL_PAR_BOOLEAN_VAL := NULL;
VC_RETURN_REJECT_PAT := 'Y';
ELSIF
VC_REJECTED_BOOLEAN_VAL = 'FALSE' AND
VC_REJECTED_PAR_BOOLEAN_VAL = 'FALSE' THEN
--Returning result set (OV_COMMENTS) for the rejected ADT.(Case 7)
OV_COMMENTS := 'AOE NOT RECEIVED IN ADT';
OR_QUES_AND_ANS := NULL;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_obx_ques:'||VC_OBX_QUES||
' vc_rejected_boolean_val:'||VC_REJECTED_BOOLEAN_VAL||
' vc_rejected_par_boolean_val:'||VC_REJECTED_PAR_BOOLEAN_VAL||
' OV_COMMENTS:'||OV_COMMENTS);
VC_EXACT_BOOLEAN_VAL := NULL;
VC_EXACT_PAR_BOOLEAN_VAL := NULL;
VC_DUPL_BOOLEAN_VAL := NULL;
VC_DUPL_PAR_BOOLEAN_VAL := NULL;
END IF;
IF
VC_RETURN_REJECT_PAT = 'Y' THEN
--Returning result set (OV_COMMENTS,Question and Answer) for the rejected ADT.(Case 5 (AOE) and 6 (PARTIAL AOE))
--In case of multiple external id with same patient, facility and draw date; the lastest record should be picked.
SELECT MAX(MSG_ID) INTO VN_MAX_MSG_ID FROM TT_A04_OBX_QUES_ANS_DTL;
OPEN VR_QUES_AND_ANS FOR
SELECT DISTINCT IAM.QUESTION_CODE,
(SELECT DISTINCT
CASE
WHEN TOBX.OBSERVATION_VALUE IS NULL THEN NULL
WHEN LENGTH(TRIM(TRANSLATE(TOBX.OBSERVATION_VALUE, 'ABCDEFGHIJKLMNOPQRSTUVWXYZ', ' '))) IS NULL THEN TOBX.OBSERVATION_VALUE
ELSE TO_CHAR(TRUNC(TOBX.OBSERVATION_VALUE * DECODE(UPPER(TOBX.UOM), 'KGS', 2.20462,1),2))
END
FROM TT_A04_OBX_QUES_ANS_DTL TOBX
WHERE TOBX.OBSERVATION_IDENTIFIER = IAM.QUESTION_CODE
AND TOBX.MSG_ID = VN_MAX_MSG_ID) AS ANSWER
FROM INTERFACE_ADT_AOE_MASTER IAM
WHERE SOURCE_SYSTEM = IN_CORP_ACRONYM;
OR_QUES_AND_ANS := VR_QUES_AND_ANS;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'vc_rejected_boolean_val:'||VC_REJECTED_BOOLEAN_VAL||
' vc_rejected_par_boolean_val:'||VC_REJECTED_PAR_BOOLEAN_VAL||
' OV_COMMENTS:'||OV_COMMENTS);
END IF;
SPL_SPN_ERROR_LOGGING_SPK.INFO_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => 'End of the procedure with Patient_Id:'||IN_PATIENT_ID||' Facility_Id:'||IN_FACILITY_ID||
' Draw_Dt:'||IN_DRAW_DT||' Requisition_Number:'||IN_REQUISITION_NUMBER||' Corp_Acronym:'||IN_CORP_ACRONYM||
' ABCDEF_Mrn:'||IN_ABCDEF_MRN||' Account_Number:'||IN_ACCOUNT_NUMBER||' Hlab_Num:'||IN_HLAB_NUM);
EXCEPTION
WHEN NO_DATA_FOUND THEN
SPL_SPN_ERROR_LOGGING_SPK.ERROR_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => SQLERRM);
WHEN OTHERS THEN
SPL_SPN_ERROR_LOGGING_SPK.ERROR_PROC
(IC_PACKAGE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IC_PROCEDURE_NAME => 'SPL_SPN_MISSING_EMR_AOE_DTL'
,IN_BATCH_ID => '100'
,IC_MESSAGE_TEXT => SQLERRM);
END SPL_SPN_MISSING_EMR_AOE_DTL;
Regards,
BS2012.Hey Guys,
I'm sorry, that I troubled you all. But I found the issue and solved it.
The actual problem is residing at that max of that partition by query. I had a misconception that this query will always return a value which is positive number like 1,2 etc.
But sometimes it's returning null as well. So the ref cursor is fetching nothing. Now I've modified my code and everything is working fine. Thanks for your help and support.
Regards,
BS2012. -
For some time, now, at certain times the cursor returns to the start position after any character is inputted. Also, any drop down menus will not allow you to select items below the top one. This does not affect any other browser on my laptop or any other software.
Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
[[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you. -
Dear all, Since a week ago I observe that when I press the button for my macbook air to start a nap, first the screen turns to black (although I can see it is stil on) and I can see the arrow (pointer). Only after 15 seconds the arrow and the screen really shut down. It did not occur before, as a matter of fact it was instantaneous. What could be the problem?
Note the time in your Mac's menu bar or some other accurate timepiece. Then, press the button to put the MBA to sleep. Wait until the cursor disappears and for all indications that the Mac appears to be asleep.
Then, wake the Mac the way you normally wake it.
Then, find the Console app - it is in your Utilities folder and looks like this
You can find it by selecting Utilities from the Finder's Go menu.
Open Console.
If the log list column on the left is not already displayed, show the log list by selecting Show Log List from Console's View menu.
Locate system.log in the list and select it. Many date and time-stamped entries will appear, hundreds of them, and you must find the entries relevant to your Mac's sleep problem. To do that type the words sleep cause in the Filter field at the upper left of the Console window:
That will cause all log entries to be hidden, except for the entries containing those words. The last entry in the list will correspond to the last time you woke the Mac. It will have a time stamp in the form hh:mm:ss later than the time you noted in the Mac's menu bar prior to putting it to sleep.
Make note of that exact time in hours, minutes, and seconds.
Next: Clear the filter field by clicking the x in the above screenshot. It should then look like this:
All previously displayed log entries will reappear.
Next: Find the log entry that corresponds exactly to the time you noted in hours, minutes, and seconds containing the words "previous sleep cause". You may have to scroll up or down a considerable distance. When you find that line, select it and drag your cursor up and prior to the entry corresponding to the approximate time you noted before putting the Mac to sleep. This will result in a selection of perhaps 50 to 100 lines or so.
One or more of them, along with their time stamps, may reveal the reason for the fifteen second delay.
Copy and paste those log entries in a reply.
Most of the entries will be cryptic but will contain information you might consider personal such as your Mac's name. If you do not want that information to appear, delete or obscure it when posting your reply. Leave enough information so that the entries can be deciphered. -
i started having issues with my i pad yesterday afternoon, then i noticed the upper section of the safari which was grey was now charcoal? since then searches are odd and when i click on history to erase its not there? i went into the apps to see if there might be some i missed cleaning out and not only were there, but i cannot remove them, am i doing something wrong? im not a computer person at all so any help would be greatly helpful. your humble ammature, joe.
Try clearing Safari's cache : Settings > Safari > Clear Cookies And Data and also Clear History
If that doesn't work then try closing Safari via the taskbar and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Not sure what you mean by the 'list of waiting' (?). Do you mean that they are on your iPad's homescreens with 'waitin' against e.g. they have haven't finished downloading ?
You can delete fully downloaded apps from your iPad's homescreens by pressing and holding any of them for a second or two and they should start to shake. Then press the 'x' in the left corner to delete the ones that you don't want, and when you've finished deleting press the home button below the iPad's screen so as to stop the apps shaking. If you don't get the 'x' on any of the apps that you've downloaded (you can't delete built-in apps) then check that Settings > General > Restrictions > Deleting Apps isn't set 'off' -
How to get start date of the period for a given date from cube
I have a situation where i need to find the start day of the period for a given date. is there a way to know that. i want to use that in my report. i enter the date from my report(i have date parameter), depends on the date, i want to display the start day
of the period. how can i write expression for that in my report?
ramHi ramprasad74,
According to your description, you are using Analysis Services as a data source for the report, the cube has hierarchy: Fyear, FQuarter, FPeriod, fweek, Fdate. You want to add a date parameter to the report, after you changed value of the parameter, the
report will return the first day of FPeriod.
To achieve your goal, we need to add a parameter to the report, then use the parameter in mdx query. For detail information, please refer to the following steps:
In the Report Data pane, right-click on a dataset created from a SQL Server Analysis Services data source type, and then click Query. The MDX query designer opens in Design mode.
On the toolbar, click Design to toggle to Query mode.
On the MDX query designer toolbar, click Query Parameters symbol. The Query Parameters dialog box opens.
In the Parameter column, click <Enter Parameter>, and then type the name of a parameter.
In the Dimension column, choose a value from the drop-down list.
In the Hierarchy column, choose a value from the drop-down list.
In the Default column, from the drop-down list, select a single value.
Click OK.
In query designer dialog box, type the mdx query like below:
with member [Measures].[FirstChild]
as
[Date].[Fiscal].currentmember.parent.firstchild.name
select {[Measures].[FirstChild]} on 0,
[Date].[Fiscal].[Date].members on 1
from
( SELECT ( STRTOSET(@ParameterName, CONSTRAINED) ) on 0
from
[Cube]
Here are relevant threads you can reference:
https://social.msdn.microsoft.com/forums/sqlserver/en-US/c7146ac3-40ea-4d53-b321-c707aebbd405/how-to-pass-date-parameter-to-mdx-query
https://social.msdn.microsoft.com/forums/sqlserver/en-US/fd12a865-bc90-4a65-af42-ce38a8cfa29b/pass-date-time-parameter-to-mdx-query-ssrs
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
If you have any feedback on our support, please click
here. -
Is there a way to change the start day for the week?
So I really like the "Insert Categories from the following" functionality of the Reorganize tool, and I fell in love with it's ability to break down by date automagically. I've encountered one problem with my use of it, though: I start my "work week" on Sunday, and it defaults to Monday as the first day of a week without any seeming way to change it to Sunday. Is there a way to do this?
Hi Christopher,
The WEEKDAY function allows specifying either Sunday or Monday as the first day of the week:
WEEKDAY
The WEEKDAY function returns a number that is the day of the week for a given date. WEEKDAY(date, first-day)
 date: The date the function should use. date is a date/time value. The time portion is ignored by this function.
 first-day: An optional value that specifies how days are numbered.
Sunday is 1 (1 or omitted): Sunday is the first day (day 1) of the week and Saturday is day 7.
Monday is 1 (2): Monday is the first day (day 1) of the week and Sunday is day 7. Monday is 0 (3): Monday is the first day (day 0) of the week and Sunday is day 6.
But I think you are referring to the first day of the 'workweek', for which I do not see a means of defining a custom value.
Since you want to 'insert categories', though, you could easily define your own, using WEEKDAY(date) or WEEKDAY(date,1), plus an IF statement to return the category label appropriate to the day. Here's one for a Sunday to Thursday work week. Dates are in column A, the formula is in whichever column you want as the Category column. For the example, I've placed it in column B.
B2, and filled down: =IF(WEEKDAY(A)<6,"Work","Off")
The top table shows the weekday numbers returned for each day of the week for each of the three permitted values for the optional second argument. The bottom table shows the results from the formula above, used to define a category label for each date:
A10 was left blank intentionally, to determine if the lack of data resulted in an error. The Warning message, flagged by the blue 'warning' triangle, is "The formula uses a number in place of a date." The 'date' assigned to this numerical value of zero was a Friday, but I'm not certain when. Probably best to avoid extra rows with no date shown.
Regards,
Barry -
How to get blank records at the start of report output for label sheet?
Hello -
What is the best way to get an arbitrary # of blank records at the start of report output?
I am writing a report that will be printed out on label sheets -- some of which might already be used. For example, there might be 3 labels per page but the first 2 have been used the last time the report was run.. so the report needs to display 2 blank records first so that the first record that gets printed on a label is in the 3rd position on the page. (the user would indicate - through a parameter - what the starting postion would be)Hi Scott
Create a user parameter that reads in the number of blanks you need to 'print' before starting the actual printing.
In the Format trigger of the outermost frame of your report write code using SRW.SET_BEFORE_PRINTING_CODE.
Loop this method based on the user parameter and call this method with skip-line-command of your printer as its argument.
Regards
Sripathy -
How do I change the start/stop time for multiple songs not just one song at a time?
How do I chnage the start/stop time for multiple songs not just one song at a time?
I don't think you can in iTunes.
Multiple editing in Get Info does not offer an option to change start/stop times. -
I don't know if this can be done with VI Logger or need to use Labview V7.1.
After browsing through the VI Logger User Manual, it looks like the triggering that you are hoping to accomplish is possible. However, incrementing the filename for the next logging event is not going to be possible. VI Logger does exactly what its name tells - logs data. I don't think the automation that you are hoping to accomplish is possible.
For help with setting up your application, if you do choose to stay with VI Logger, make sure to chek out the Getting Started with VI Logger Manual.
Best of luck.
Jared A -
Okay: My start page is the one Google provides: http://www.google.ca/firefox?client=firefox-a&rls=org.mozilla:en-US:official and frequently it has a note underneath the search box that "You're not on the latest version of Firefox. Upgrade today to get the best of the Web!" But when I check for updates on the About Firefox window, it says my Firefox is up to date. So what is the start page looking for? Is there some setting I need to adjust? Or is this a Google marketing ploy to get me to switch to Chrome?
I tentatively think I have the solution; this is for when the session id value 'thing', in about:config, referred to in other answers is already on the default/rest state.
I am assuming, I don't what to imply certainty in-case there is a value wrong in our browsers, that the problem stems from the fact that our homepage is no longer the default for Firefox.
So, go to 'Options'>'General' and delete the homepage. This will reset it to the new address, which is 'about:home'.
I hope this helps some people. -
When I tried to recover my profile (I am going to be reformatting and wanted to save my bookmarks and passwords) the line in your help that I was supposed to type into the start menu came up with zero hits, if you could let me know what the problem may be I would appreciate it, thanks!
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.)
Maybe you are looking for
-
How to retrieve which user-agent in a java portlet?
Is there a way to get http user-agent info about which browser requested a page with a portlet from within the java portlet? It seems like the request.getHeader() always returns the same value no matter what browser we use. Have also tried portletRen
-
Error in layouts for custom bdoc's
Hi All, we are using some custom bdoc's to generate the layouts ( document generate) for the MSA. for the custom bdoc the getrecordset() method is throwing error in the following code of layoutSQLStatement business object. Kindly let us know for a
-
Dear Forum: A friend of mine, who is not very computer savvy, has a Xerox WorkCentre PE120i multifunction printer, which, unfortunately, is not directly accessible to me because of a great distance. It supports printing, scanning, copying and faxing.
-
RUNTIME Error using OWB 1.2.5.0.0
I recieve the following error: MICROSOFT VISUAL C++ RUNTIME LIBRARY RUNTIME ERROR! PROGRAM C:\JDK1.1.8\BIN\JAVA.EXE ABNORMAL PROGRAM TERMINATION This occurs when I'm using the capture wizard and specifing which MSACCESS I want. I used OWB this mornin
-
SSIS package works on one machine and gives conversion error on other machine
Hi All, I have 150 + packages, I am fetching data from Oracle (11g) and loading in SQL Server. My problem is all the packages works fine on one machine whereas some of the packages give error "cannot convert between unicode and non-unicode string dat