Business Process not initiated

Hello,
I have implemented a little business process that works in conjunction
with 2 other systems.
System one sends asynchronously a message to the business process, that
bp transforms the message and sends it synchronously via rfc to the
system two.
For this situation I have created a business process and a business
scenario, which are all configured properly at least according to the
checks in the integration designer.
At next I have transfered the scenario to the integration configurator
and configured the business systems. So far there was no problem in
doing so.
In the end I have 2 configured business systems, 1 business process, 2
receiver determination and 2 interface determinations and 1 receiver
agreement.
After that I have generated a proxy via sproxy in the business system 1
and called the proxy asynchronously. This call is monitored in the XI
correctly, but it is flagged as "Message scheduled (commit missing)".
Then nothing happens any more. I have checked the workflow engine
(sxmb_moni_bpe) whether something has been received, but this was not
the case. I also checked whether there are 2 identical entries for the
receiver determination.
Although the CPA cache seems to be ok at the moment according to
transaction (sxi_cache) and the information from the integration
repository, I had some problems today while creating the scenario, it
said "unable to refresh cache content" and the signals in the
repository where red. But right now, everything looks fine except the
fact, that the message from my abap proxy is not routed through
correctly.
This seems to be very strange, has somebody an idea what the status:Message scheduled (commit missing) actually means?
Thank you very much,
Oliver Budde

I trying to design a Business Process. After a success creation of my Business Process, I trying to insert the components and it's work but when a trying to assign any interface or configuration to my components, they don't allowm assign anything because the properties aren't enable...
Any one already faced it?
Thanks in advance.
Edaurdo.
[email protected]

Similar Messages

  • BPEL Process not initiated.

    Hi,
    I created a empty BPEL process. My process is as follows: I have a file adapter which reads a csv file. Then I invoke a database adapter which calls a procedure to insert data into the table. It is fairly a simple process.
    I have the file adapter set as follows: Selected the physical path and the direcotry of incoming data is specified to a directory path on the BPEL server (/home/temp/data) where the process is deployed. I have places a csv file in that directory.
    I deployed the process onto the server and it was deployed succesfully, but in the console, I do not see any process getting initiated....Can anyone please let me know if I'm doing anything wrong or missing anything.
    Thanks so much
    -Prapoorna

    I have this message in the domain.log. I removed the / after the temp but still the same error. Are there any setups we need to do on the server so it reads from this path?
    Thanks
    -Prapoorna
    <2008-11-11 18:14:45,011> <INFO> <newdomain1.collaxa.cube.activation> <File Adapter::Inbound> Recovery still not possible after 50 attempts due to ORABPEL-11001
    Invalid Input Directory.
    The value specified for the input (Physical/Logical)Directory activation parameter has an invalid value "/home/temp".
    Ensure that the following conditions are satisfied for the input directory :
    1) It exists and is a directory (not a file). and
    2) It is readable (file read permissions). and
    3) If activation parameter "DeleteFile" is set to "true" then the directory should also have granted write permissions. and
    4) If using a logical name, then ensure that the mapping from logical name<->physical directory is correctly specified in the deployment descriptor.

  • SAP business processes - HR

    Hi gurus,
    Can you please tell me where I can find standard SAP business processes (not any client specific) ?
    For example, 1. Benefits - from enrollement, changes, termination.
    2. Payroll - Hire employee, maintain pay roll area, payroll status, then maintain IT 07, 08 ,,, then run Payroll Run program(what is the program name), then how to transfer the results to FI.
    3. Time - what are the infotypes maintained (why), then what/which is the time evaluation program, how the time results used in calculation of Payroll...
    Please let reply if you have any general idea where to search for this (any module is ok)?
    Can some one please help?
    thanks,
    Rupali.

    Hi Rupali,
    There is not really any such thing as "standard business processes". There are best practices, but generally these are not really documented. Business processes vary from business to business. SAP has functionality and the ability to adapt the system to meet many business process scenarios.
    Best regards,
    Luke

  • Business Process Definition

    Hello,
    I run into problems when I want to define a business process that initially receives a message via a asynchronous message interface, then this message is transformed. After this transformation into a message I want to use the message for sending from a synchronous interface, but this doesn't work. I have read that there exists a sync/async bridge, but I need the other one async/sync, how does it work any examples available?
    Thanks
    Oliver

    Hi Nicolas
    You might find the "Layout" button in the top right corner of the process helpful.
    I'm a bit obsessive about the way the processes are drawn so I don't use it. Sure there is someone out there who uses this, but believe most of us manually layout the processes.
    Be sure to click Save button before clicking the Layout button. Worse case is that you see what it does and then hit Cntl-Z to undo it.
    Dan

  • Down payment process for Poland, new business process or not ?

    Hello,
    I'm a little bit confused about implementation down payment process for Poland.
    The OSS-notes 818079 and 1007635 describe a solution for this.
    How do I have to implement the correct down payment process for Poland ? Do I have to create an extra business process with new sales order type, new billing type, separate calculation procedure, new output type and so on ?
    Or is it possible to use existing business processes in sales and distribution for down payment processes ?
    Thanks in advance
    Holger

    hi,
    Check the process for down payment processing
    The following Customizing settings have to be made for down payment processing:
    Settings for the billing plan - To activate the billing plan function, maintain the materials, for which you wish to process down payments, with item category group 0005 (milestone billing). This gives the item type TAO via item type determination. The item type TAO calls up the billing plan function.
    You need to implement the following activities in the billing plan for down payments:
    Maintain deadline category - This determines the billing rule (percentage or value down payment) for the down payment request. The system assigns billing type FAZ (payment request) defined in the standard system with billing category P. (For the billing type FAZ there is the cancellation billing document type FAS in the standard system).
    Maintain the deadline proposal - Use the down payments that are due for the proposed deadlines.
    Maintaining a Pricing Procedure with the Condition Type AZWR:
    In the standard system the condition type AZWR is delivered for the down payment value already provided but which has not yet been calculated. You must include this condition type in the relevant pricing procedure before output tax.
    Enter condition 2 (item with pricing) and the calculation formula 48 (down payment clearing value must not be bigger than the item value) for the condition type AZWR.
    Before the condition AZWR you can create a subtotal with the base value calculation formula 2 (net value). If the condition AZWR is changed manually, you can get information on the original system proposal from the subtotal.
    Maintain the printing indicator - The pricing procedure can not be marked as a transaction-specific pricing procedure (field Spec.proc.) The condition type AZWR has the calculation type B (fixed amount) and the condition category E (down payment request / clearing).
    Maintaining the Billing Document - In the standard system there is the billing type FAZ (down payment request) and the billing type FAS for canceling . The down payment is controlled using the billing category P of the billing type. A billing type becomes a down payment request when the billing category P is assigned. You have to maintain blocking reason 02 (complete confirmation missing) for the billing documents and assign it to billing type FAZ.
    Copying control - Copying requirement 20 must be entered in copying control at item level for the down payment request. In the standard system the order type TA for copying control is set up according to the billing type FAZ for the item category TAO.
    Copying requirement 23 must be entered in copying control at item level for down payment clearing. In the standard system the order type TA for copying control is set up according to the billing type F2 for the item category TAO.
    Financial Accounting settings - A prerequisite for down payment processing is that the account is assigned to the underlying sales document. To do this, change the field status settings in Customizing as follows:
    Set reconciliation accounts (transaction OBXR) - For the `received down payments' and `down payment requests' from
    the G/L accounts you have selected, you should assign the field status definition G031.
    Maintain accounting configuration (transaction OBXB) - For the down payments (posting key ANZ in the standard system) and the output tax clearing (posting key MVA in the standard system), you must maintain the posting key.
    You must also carry out a G/L account number assignment for the tax account.
    Maintain the posting key (transaction OB41) - For posting key 19, set the sales order as an optional field !!!
    Maintain the field status definition (transaction OB14) - For field status variant 0001, field status group G031, set the
    sales order as an optional field !!!
    Assign the company code to the field status variants (transaction OBC5)
    chandu

  • Business Area not showing during MIGO line item process

    Hi,
    We are doing the MIGO process w.r.t. PO....there in Line item...Business Area not showing in its Field.
    If we create another MIGO document with other PO, BA is showing...
    What should be the issue...

    Hi,
    is this an account assigned PO ? Please check the PO document for the acct asst Tab .
    whather the BA is populated .?
    Please reenter the detials of GL account and try again for the PO.Please check whather the co object is properly assigned or not ?
    Regards,

  • Message not passed to Business Process Engine

    Hi,
    I have a simple test scenario:
    File --> Integration Process --> File
    The process only has a reveive and a send step and sends the message further using the File adapter (this is just for testing purpose and no real-life scenario).
    This works correctly until the message needs to be passed to the Business Process - in message monitoring I can see that the receiver and interface determination worked successfully and that the message needs to be passed to the Integration Process and that's it. No active process, no obvious error message...
    Any hints what I could do to analyze what's happening? Where can I find more information on what the problem could be (any additional logs, monitoring, etc.)? What can go wrong when a message is passed from the Integration Engine to the BPE?
    Thanks for your help,
    regards,
    Peter

    OK Im trying to understand you....
    Your saying that it works correctly until the BPM...
    Well this is not possible as the first step would be the sending from the source Business system to the Integration Process so in essence you would have not done anything....
    Basically the flow is Comm channel to Pipeline which then sends to BPM which then sends back to the pipeline and to the target system. So in SXMB Moni no receiver would of been foun if you are saying that it doesn't get to the BPM....
    Maybe im not understanding properly....
    In fact now that I think about it... Have you specified the message in BPM... (Abstract Interface etc)
    Message was edited by:
            Alex Ong

  • Business Process Graphics are not coming in SOLMAN 3.2

    Hi,
    In my solman system graphics for business processes are not coming.I am getting an error message "The page cannot be found".
    The link is as follows...
    http://itssvr.tsm.com:8000/sap/bc/solman/defaultUser/graphic/solmangraphic.htm?sap-language=E&sap-client=100
    &_appl=SOLAR&_cmd=READ&_cacheid=032E57B2E
    6FDB14188B4313543C5393E
    I have checked sap-bc-solman-defaultuser-graphicdata is activated.
    Please suggest.
    Thanks & Regards
    Mrutyunjay

    hI,
    Go to vtlf  copy controls in item data  vbrk/vbrp give 001  try this it my work out.
    Best regards,
    venkataswamy.y

  • Business Process Step properties  not loading

    Hi All,
    I believe the problem is apparent enough from the topic itself . After i create a Business process and then decide upon the steps and later on when i try to load the properties of the individual steps its not getting loaded. i belive its not the problem with the momory sizing of the server as we have another server with much lower memory working well.
    any sort of suggestions ... folks???
    regards,
    Rahul

    Rahul,
    This problem is because the Metadat has nt been imported correct.
    Ask your BASIS team to reimport the SAP Basis SWCV corresponding to your SP level in the IR .
    This would do the trick.
    Regards
    Bhavesh

  • Business process 300900 is not yet planned in version 0/2008.

    Hi Friends,
    I am doing easy cost planning---> execution services  for Internal activity allocation but when I am posting the document getting the below error.
    How can I overcome this.Pointers will be rewarded.
    Business process 300900 is not yet planned in version 0/2008.                                                                               
    Message no. BK505                                                                               
    Diagnosis                                                                               
    You did not carry out planning for business process 300900 in fiscal      
        year 2008, version 0.                                                                               
    Because process 300900 also has no active actual price indicator, you     
        cannot carry our actual allocation.                                                                               
    Procedure                                                                               
    In order to allocate to the business process in actual:                                                                               
    o   Carry out activity planning for the process                                                                               
    o   Alternatively, set the actual indicator for the process so that the   
            R/3 System carries out revaluation in actual                          
    Carry out planning and maintenance of the price indicator in the    
    Activity-Based Costing component.                                   
    Regards

    Hi Amit,
    1. Check the master data settings of process 300900 in CP02. In the "Allocation" tab. all the necessory settings are maintained such as process diriver and defalut values like cost element, actvity allocation (should be "1" i.e. manual entry in your case)
    2. Maintain the planning data for this business process through CP26 for year 2008.
    Regards

  • Business Process Repository not displaying data for 4.7 systems

    Hi All,
    Having a bit of an issue finding any 4.7x200 related stuff on the Business Process Repository on solar_project_admin, I checked an this should be related to the ST-ICO patch but im in ST-ICO 150-700 patch 17...
    Any ideas?
    System is SolMan 7.0 EHP1
    Regards
    Juan

    Hi
    The BPR is accessed via solar01
    solar_project_admin is used for project creation and logical component is added here for 4.7 or other systems as per req.If that is not appearing contact ur basis team they will create a logical comp for ur req.
    OR
    are you having prob in adding the buss processes than you can add as shown in this guide as follows
    https://websmp210.sap-ag.de/~sapdownload/011000358700002006042008E/HowTo_Impl_Bus_Proc.pdf
    Hope it solves ur prb
    Regards
    Prakhar

  • Business process  is not yet planned in version 0/2010

    HI,
    In Timesheet entry in CAT2, i am facing the following error
    Business process EPI0001 is not yet planned in version 0/2010
    Please help to solve it.

    HI,
    the message means that there are is no activity / price planned for fiscal year 2010 (thus your time entry in CAT2 can not be valuated).
    Check who is responsible for the missing entry in CP26, maybe the business process is outdated and there is a new one to be used?
    best regards, Christian

  • Process Manager is not initialized

    Dear MDM/DRM experts,
    New to DRM, I seek your help in configuring DRM on my local machine. I have installed server and its is running well. I can connect to database as well. The problem is, when I try to login with mdm_system user, I get this message "Process Manager is not initialized". In DRM console, I see a "No" against MDM Process Manager and MDM event manager. There is no service created with the name MDM Process Manager in Windows services panel.
    I have created two users with admin access on my machine: mdm_system and mdm_db. There is a point I need to mention here, I got an error while installing com+ applications. Rest goes fine after that. I don't know if the error has anything to do with COM+ installation.
    Any ideas on above problem are appreciated.
    Thanks in advance,
    Ashish K

    As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
    What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
    However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
    -- Adi

  • Facing an error while restarting the services : Process Manager is not initialized.

    while setting up the MDM environment I somehow messed up all the database connections.
    Now im unable to start or stop the services properly.
    Below is the error shown in the event viewer log for process MDM Ntier Process manager :
    The description for Event ID ( 3 ) in Source ( MDM NTier Process Manager ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. You may be able to use the /AUXSOURCE= flag to retrieve this description; see Help and Support for details. The following information is part of the event: Exception Emdm_Exception with message 'Process Manager is not initialized.'.
    Kindly help
    I suspect this is because incorrect password for Engine login MDM_SYSTEM or incorrect configuration file (config.xml), However i may be wrong.

    As far as the "Process Manager is not initialized" error is concerned, we got the same error recently.
    What we did was restart the DRM services on the server - The N-Tier Client and the Web-Publisher.
    However, after doing it - we still got the error or DRM would not respond. On looking through it again, we saw that the Task Manager on the Server did not kill the DRM processes and so we did it manually. Then we restarted the services and it worked fine this time. See if this works for you - first kill all the services on the client sides and then on the server side, check for the client and server side process task manager and then restart the service. This worked for us, hopefully it works for you too.
    -- Adi

  • NOTIF_CREATE has grayed out "Business Process" Field, BP are not selectable

    Hello all,
    related to another thread (notif_create), I am trying to select Business Processes in the NOTIF_CREATE Dialog. My Solution has Business Processes assigned, and I can see them in the F4 Help List, but I cannot apply them (green check mark is grayed out)
    How can I make this field changeable?
    Thank you for your help
    Kind regards

    disregard, this is another issue than what I was thinking.
    Edited by: Jason H on Feb 5, 2009 8:07 PM

Maybe you are looking for