No declaration of property 'imageview' found in the interface
i am having trouble with these two errors i have tried many ideas but still no luck, here is how it looks
#import "IntroViewController.h"
@implementation IntroViewController
@synthesize imageview; <no declaration of property 'imageview' found in the interface
-(void)viewDidLoad {
imageview.animationImages = [NSArray arrayWithObjects: <' undeclared (first use in this function)
[UIImage imageNamed:@"Logo 1.jpg"],
[UIImage imageNamed:@"Logo 2.jpg"],
[UIImage imageNamed:@"Logo 3.jpg"],
[UIImage imageNamed:@"Logo 4.jpg"],
[UIImage imageNamed:@"Logo 5.jpg"],
[UIImage imageNamed:@"Logo 6.jpg"],
[UIImage imageNamed:@"Logo 7.jpg"],
[UIImage imageNamed:@"Logo 6.jpg"],
[UIImage imageNamed:@"Logo 5.jpg"],
[UIImage imageNamed:@"Logo 4.jpg"],
[UIImage imageNamed:@"Logo 3.jpg"],
[UIImage imageNamed:@"Logo 2.jpg"],
[UIImage imageNamed:@"Logo 1.jpg"], nil];
imageview.animationduration = 6.00;
imageview.animationRepeatCount = 1;
[imageview startAnimating];
[self.view addSubview:imageview];
the < represent the errors, please help and thanks!
thank you that was what the error was, but now i am having a new issue that i can't find an answer for. When the program runs and builds it brings up a black screen then just closes without any of the images ever showing up. any ideas?
Similar Messages
-
Newbie question - "no property of label2 found in the interface"
In the HelloWorld sample application, I added a second label.
Then, in MyController.h, inside "@interface MyViewController", where label was defined as
IBOutlet UILabel *label;
I added a line below that
IBOutlet UILabel *label2;
After doing that, in the Interface Builder, I was able to connect a line from the label to File's Owner and "label2" appeared amongst the selection there, so I made the connection. I figure I did that right.
As far as that goes, the app built and ran ok with no errors.
In MyViewController.m, however, I noticed there was a line:
@synthesize label;
I still don't understand what that means, but figured if there was one for label I ought to add one for label2 as well, so I added a 2nd line
@synthesize label2;
However, if I do that, I get a compile-time error: "no declaration of property "label2" found in the interface.
My questions are:
(1) Why do I get that error if I did, in fact, declare label2 in the interface?
(2) What does @synthesize mean anyway?
Thanks,
dougThanks, g.difalco.
Yes, that what was missing. When I added
@property (nonatomic,retain)UILabel *label2;
the compile error went away even with the @synthesize label2 in the MyViewController.m file. Thanks. While looking for "symmetry" with the label definition on the MyViewController.h file I overlooked that one.
Now let's see if I can wrap my mind around the rest of what you said. I am new to Objective-C, but I did read that the "dot syntax" for properties that I have been used to for years in JavaScript is a relatively recent addition to the language.
So you are saying that the @synthesize line allows that new, convenient syntax to be used.
OK. I'll go along with that. I don't know why the word "synthesize" is use for that purpose, but I will let that sink in.
Is there a reason the @synthesize line goes in the @implementation inside MyController.m rather than in the @interface in MyController.h?
Thanks,
doug -
Hi,
My application was working fine some time back. I am not sure what has changed.I am receiving following error :
A message received by adapter "FILE" on receive location "FILE Edi_Receive_Location_EANDIS" with URI "C:\AMR46783\OUT\*.edi" is suspended.
Error details: There was a failure executing the receive pipeline: "Umix.Van.Pipeline.Custom_Receive_BackupEdi_Pipeline, Umix.Van.PipelineModule, Version=1.0.0.0, Culture=neutral, PublicKeyToken=7e83b13ccba9e75d" Source: "EdiDecoder" Receive Port: "FILE_Custom_Receive_Port" URI: "C:\AMR46783\OUT\*.edi" Reason: Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly.
Any help would be appreciated.When using custom or 3ed party Adapter you might receive this message "Loading property information list by namespace failed or property not found
in the list" in the event log”
Usually this error caused by when deleting default application (BizTalk Application 1) that used to store message context
property field schemas that are provided by adapter vendor to
You can solve this problem by simply reinstall the adapter or selecting repair adapter option. Or GACing and deploying required property files
manually.
Please mark answers that solve your problem. -
Hi,
We are facing issue in BizTalk 2010 837 Institutional claim process. The Error is “Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly”.
We have used Custom Pipeline component to update the promoted property like MessageType. When we drop the XML File in Receive Location it generates the XML file through Pipeline but promoted property MessageType is not updated in Receive Location and throw
the error as mentioned.
We have the schema which is not duplicate as well as different version.
Could you please help on this issue.
Thanks in advance.Praveen,
There are two issues here.
“Loading property information list by namespace failed or property not found in the list. Verify that the schema is deployed properly” issue is normally due to the deployment issues. This more often occurs when you have same schema with multiple
version and this issue is due to the sequence/order in which these two schemas are deployed. If you run the following SQL query in your BizTalk management db replacing it with your target namespace of the schema deployed
SELECT *
FROM bt_XMLShare
WHERE target_namespace like N'http://YourTaggetNameSpace'
You shall see two version of the same schema listed and both of them should have Activate flag set to 1. If any of the schemas is set to 0, then you will have the above mentioned issues. This is due to the way the different versions of the schemas are deployed.
You can undeply both the version, deploy them together or deploy the older version first and the later version later.
And for another issue of custom property not updating the MessageType property, debug the pipeline component code. This issue has no direct impact to the above issue. If you you’re your Message Type to be updated and if it’s not getting changed, then debug
the code and check why its not been updated.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
NO Interface Mapping found in the Integration Directory (Configuration)
Hi,
I've got following problem with PI 7.0::
I have a Mapping Scenario designed in the IR. It works - using test function - there. If I go to the COnfiguration Tool during creating of the Interface Determination it doesn't find the Interface Mapping. The Sender resp. Receiver Interfaces are correct assigned to the Business Systems.
- Sender Business System is a FTP Server, which contains the needed Sender Interface.
- Receiver Business System is a SAP R3 System containing the RFC Receiver Interface.
I had to change the Related Integration Server of the SAP Business System in the SLD. How can I be shure, that my PI System is syncronous with the SLD? How can i get the newest changes - BS, TS or SC - from the SLD updated to my PI?
Thx in advance
MichaelHi,
You must make sure that you have correctly identified the interfaces in your interface mapping.
1. Message Interfaces are correctly configured
2. Outbound/Inbound Interfaces are correctly declared in Interface Mapping
Otherwise, your interface mapping would not be found in the interface determination in Integration Directory. -
I have a Director MX 2004 based training course that is
periodically getting the following error:
property not found: #text
This training program was developed in Director 6.5 and
updated last year to MX 2004. The training program had been running
without error for six years prior to the update. I didn't update
the script that is causing the error until after receiving the
error reports.
After getting the error report I was able to reproduce the
error while running in MX 2004 and the error said:
Script error: Property not found
set the text of member "IN" = tempIN & sp &
pretempIN
#text
I checked the debugger and the local variables were all valid
and nothing seem out of place. The field cast member "IN" exists
and the member's sprite is static in the score (i.e., it's not
being dynamically created).
Since I couldn't figure out what the problem was I updated
the field update scripts to the new syntax:
member("INText", "Internal").text = tempIN & sp &
pretempIN
I also changed the name of the cast member thinking that the
name "IN" may be causing the problem. There are no other cast
members of the same name. Unfortunately, I'm still getting the same
error. There are other field member sprites that are getting
updated successfully before this line of code but for some reason
this particular field member sprite is causing the error, even
after changing the name of the member. I've since moved my text
formatting script to the frame script in the score where the field
members are located and tried preloading the member but neither of
those changes helped.
This error is very sporadic and I've only been able to
reproduce it few times on my local machine, and not since I updated
the script syntax and the field name, but my client is still
encountering the error. I checked that my client's program file
installation is up-to-date and they're running the newest
executable.
Any ideas of what might be causing the problem? I'm
stumped...
Markquote:
You seem to be using #field member and #text member
interchangably. They're
not the same type of member and they have different
properties.
Actually, I'm not. It's a field member. The member's name
"INText" probably led you to believe it's a text member. I changed
the member's name from "IN" to "INText" as I thought perhaps the
"IN" may be causing the problem. The member has always been a field
member. I'm not formatting the field or anything like that, I'm
only replacing the field contents. I don't use Director much
anymore, other than this project, but having used both 7.5 and MX,
I assumed that I could access the text property of a field using
the member("myField", "castName").text syntax as per the docs.
As for the concatenation, the variables are all strings so it
shouldn't really matter. The real problem is that the field
member's text property can't be found, not what I'm putting into
it. And the fact that it only happens occasionally is what I can't
figure out. Since I encountered the error myself inside of Director
and was able to run the debugger I was able to see all of the
variables in the debugger and check for the field member and its
properties in the Message window and everything looked okay.
quote:
To double check the member coflickt issue (director always
operates on the first occurance of a member name
It's definitely the only member using the name "INText",
plus, I checked all cast libs and it's a unique name.
When I originally converted the movie I do recall that I had
another cast member named "IN", the original name of the field
member, when I converted the movie. I can't remember the type of
member it was but I'm pretty sure it wasn't a field. Perhaps the
movie still has some kind of reference to that not field member and
may point to it occasionally, even though I've since renamed the
original field cast member to "INText".
Mark -
ADF Customization (Fusion Apps) - Property not found exception
All
Trying to customize a Fusion Apps application(essentially ADF) where in a popup has to be inserted into an existing page and displayed on UI on a Submit button click.
I have bound the popup to a backing bean property 'Sp1' so that the popup can be invoked programmatically from an action listener method. Note: Show popup behavior is not an option due to some of the business requirements.
When the page renders, it throws the exception 'Sp1' property not found in the backing bean class. Although the Submit button is able invoke the action listener method without an issue.
Not sure why the property is not found to the page when it is able to invoke other methods in the class. Any pointers?
Here are the steps followed:
1. Opened JDev in Fusion Apps Dev role > Created a ViewController project > Created a java bean A, manually added a RichPopup property Sp1, added an action listener method 'submitForApproval'
2. Created an Adf jar and deployed > Placed the jar under WEB-INF/lib directory under the EAR/WAR on the server and redeployed so that the jar becomes available to the Fusion App
3. Created another app which is a FA Customization App and a project under it
4. Now re-opened JDev in Fusion Apps Customization role > and opened up the FA Customization App
5. Customized the Fusion Apps page to associate the 'submitForApproval' bean action listener method to the existing Submit button on the page
6. Customized the page to insert a popup with Id='Sp1', marked the property contentDelivery=lazyUncached
7. Customized the corresponding taskflow to add the managed bean entry for the new bean
When I apply the customization MAR on the APP and run the page on the server, I see 'property Sp1 not found in the bean class' exception on the page.
However, when I click on Submit button anyway I see that the contents of the method are executed. So, I believe the page is definitely finding the class but not this property.
Verified that Sp1 property is of type RichPopup and has accessors in the bean.
Any pointers would be much useful.
Thanks
NiranjanSince we donot use FusionApps , it will be hard to comment on this . Please post this on the internal ADF Frontend Forum @ myforums.oracle.com
-
No Property Editor Found Exception -JSF 1.2
Hi I am migarating an application from weblogic 9.2 to weblogic 10.3. I am using tomhawk jsf libaray 1.10.While migarting i am getting an error
I checked all the compatibilty ...servelet 2.5. I also kept valid webxml for servlet 2.5 etc. But still i am getting the same error.
Please help me,
No property editor found for the bean "javax.el.ValueExpression".
<f:selectItems value="#{dataAdmin.dataAdminVO.tablesList}" rendered="#{!empty dataAdmin.dataAdminVO.tablesList}"/>
^------------------------------------------^
at weblogic.servlet.jsp.JavelinxJSPStub.compilePage(J avelinxJSPStub.java:328)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStu b.java:237)
at weblogic.servlet.jsp.JspStub.prepareServlet(JspStu b.java:182)
at weblogic.servlet.internal.ServletStubImpl.execute( ServletStubImpl.java:235)812883 wrote:
yes it is urgent lot of issues are pending need quick ansoh dear - the moderator's reply sailed right past him. It has even been marked 'correct' :) -
The VCC property was not found on the resource
Hi all,
I used a subversion to download/upload process in one of my application.
At a point it give an error like this.
svn: The VCC property was not found on the resourceCan someone tell me what that error means, and how to fix it.
Thanks in advance,
itsjava :)There are several resources available if you do a Google (or other favorite search engine) search on this such as [this one|http://www.svnforum.org/2017/viewtopic.php?t=6271&highlight=vcc+property+resource] and [this one|http://svn.haxx.se/dev/archive-2003-10/0674.shtml] and [this one|http://readlist.com/lists/subversion.tigris.org/users/2/11220.html] (that talks about this usually being a web server configuration error). I recommend specifically focusing on Subversion forums such as the [General Setup & Troubleshooting forum|http://www.svnforum.org/2017/viewforum.php?f=16] at [SVNForum.org|http://www.svnforum.org/].
-
Bean property and public field found with the same name: getid
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
[build.xml]
[work.jar]In article <[email protected]>, lcl <[email protected]> wrote:
-=-=-=-=-=-
Hi all,
I have a ejb jar file contains some local entity beans and one session bean
, the session bean has some functions suck as findXXXByQuery() , InsertXXX()
, and I have created some model class for the entity bean , and use it as
the parameter or return type of the session bean , then I want to transfer
the session bean as a webservice , using ant automaticly . All this function
successfully in weblogic 6.1 , but when I want to run ant command in
weblogic 7.0 , an error occured :
[servicegen] weblogic.xml.schema.binding.BindingException: Error: bean
property
and public field found with the same name: getid
Yes , I have a getid field in table , a getid in entity bean , and a getid
property in model class , but what different does it make ? Would you mind
to test my jar file ? I send all files as attachments .
Any advice will be appreciate .
lcl
-=-=-=-=-=-For better or worse the JAX-RPC spec requires this behavior. From
section 5.4.1:
"There is no standard mapping for the case when a JavaBean property
has the same name as a public field. A Java to XML mapping
implementation is required to flag this case as an error."
Since you are not the first person to run into this restriction I'm
beginning to think we need an option to bypass it.
--Scott -
Property or collection #comment was not found in the component interface
Hi All,
I am a Java developer trying to connect my java application to a peoplesoft webservice.
I have been able to connect to the PS webservice and access "GET","FIND" methods successfully.
But when i am trying to connect to the CREATE(insert) method, i get the following message text.
<faultcode>SOAP-ENV:Client</faultcode>
<faultstring>Component Interface API.</faultstring>
<detail>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>74</messagenumber>
<messagetext>Property or collection #comment was not found in the component interface at the given level.</messagetext>
</messages>
</detail>
I dont have any access to peoplesoft or db logs, i started using SOAP UI to get the detail messages.
Can anyone tell me what this message could be??
Basically its an insert method which takes around 40 parameters out of which 2 are mandatory.
The input that i send from my soap ui looks as follows
+*<kcm:CASE_ID></kcm:CASE_ID>*+
<kcm:DISP_TMPL_ID>CRM_GOV</kcm:DISP_TMPL_ID>
<!--Optional:-->
<kcm:QUICK_CD>?</kcm:QUICK_CD>
<!--Optional:-->
<kcm:PROVIDER_GRP_NAME>City Manager Action</kcm:PROVIDER_GRP_NAME>
<kcm:BUSINESS_UNIT>KCM01</kcm:BUSINESS_UNIT>
<!--Optional:-->
<kcm:PRODUCT_ID>?</kcm:PRODUCT_ID>
When i dont send any parameter in case_id i get the above error and when i send +*<kcm:CASE_ID>?</kcm:CASE_ID>*+
i get a sql error
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SQL error. Stmt #: 650 Error Position: 123 Return: 1722 - ORA-01722: invalid number</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>200</messagesetnumber>
<messagenumber>0</messagenumber>
<messagetext>SELECT /*+ FIRST_ROWS */ CASE_ID, DISP_TMPL_ID, BUSINESS_UNIT, RC_STATUS, RC_SUMMARY FROM PS_RC_ADD_CASE_VW WHERE CASE_ID=:1 AND DISP_TMPL_ID=:2 ORDER BY CASE_ID, DISP_TMPL_ID</messagetext>
<explaintext/>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>48</messagenumber>
<messagetext>Error accessing search record. {KCM_WEB_CASE_CI} (91,48)</messagetext>
<explaintext>An error occurred while accessing the search record.</explaintext>
</messages>
<messages>
<type>Error</type>
<messagesetnumber>91</messagesetnumber>
<messagenumber>61</messagenumber>
<messagetext>Failed to create the Component Interface</messagetext>
</messages>
I am not understanding how do i debug this further as its very difficult for me to get any peoplesoft logs or db logs.
Any help will be appreciated.
Thanks
Ash
Edited by: ash81 on Jun 14, 2010 1:24 PMThis will be very hard to troubleshoot without access to PeopleSoft.
Ideally, the best way to test it would be replicate the steps you are performing in your code through the component interface/web service, and then on the actual PeopleSoft component to see if you get the same error.
The second case where you haven't put in the parameters, make sure you clear out the ? marks and leave the value empty if you don't need to specify it.
E.g.
Instead of <kcm:QUICK_CD>?</kcm:QUICK_CD>
Use: <kcm:QUICK_CD></kcm:QUICK_CD>
I generally work backwards from soapUI -- look at the soapUI error, then test through the component interface tester in PeopleSoft application designer, then if required test in PeopleSoft. -
Hi All,
I am new to Siebel and installed Siebel 8.1.1.11 on RHEL 5.5 (64 bit). Everything is fine Siebel server and gateway server are up and running but i am unable to open login page.
Login Error : The server you are trying to access is either busy or experiencing difficulties. Please close the Web browser, open a new browser window, and try logging in again.[15:36:09]
Siebel Server log file error :
GenericLog
GenericError
1
00006c5c52eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6352eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6452eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6552eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c6652eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c7152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c8152eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9052eb6e6f:0
2014-01-31 13:06:04
(sccnmsys.cpp (1306) err=2883609 sys=0) SBL-SCC-00025: No value found in the Gateway. Default value in the repository is used.
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccitems.cpp (310) err=2555932 sys=0) SBL-SCM-00028: Key not found
GenericLog
GenericError
1
00006c9152eb6e6f:0
2014-01-31 13:06:04
(sccconfg.cpp (2149) err=2555932 sys=0) SBL-SCM-00028: Key not found
I can connect to Siebel Server manager using command as : srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
ODBC connectivity is also ok and i can connect as : ./odbcsql /source Sieb81_DSN /u SADMIN /p SADMIN
While installing Siebel i had left one step i .e.. creation of siebenv.sh using CreateSiebSrvrEnvScript because i got error when executed this script as :
Execution command : ./CreateSiebSrvrEnvScript /u01/siebel/ses/siebsrvr 192.168.0.163:2320 ENU Oracle
Error : cp: cannot copy a directory, '/u01/siebel/ses/siebsrvr/locale/' , into itself , '/u01/siebel/ses/siebersrvr/locale/C/locale'
Please suggest me what to do because if i want to configure again the same issue with CreateSiebSrvrEnvScript.
Message was edited by: Prabhakar2991Hi Prameela,
You can see all application objects are online and running. One more thing I have also checked ODBC is also working fine. I mean , user SADMIN can connect using ODBC.
=====================================================================================================================================
[oracle@siebel163 siebsrvr]$ srvrmgr /g 192.168.0.163 /e Sieb81 /u SADMIN /p SADMIN
Siebel Enterprise Applications Siebel Server Manager, Version 8.1.1.11 [23030] LANG_INDEPENDENT
Copyright (c) 1994-2012, Oracle. All rights reserved.
The Programs (which include both the software and documentation) contain
proprietary information; they are provided under a license agreement containing
restrictions on use and disclosure and are also protected by copyright, patent,
and other intellectual and industrial property laws. Reverse engineering,
disassembly, or decompilation of the Programs, except to the extent required to
obtain interoperability with other independently created software or as specified
by law, is prohibited.
Oracle, JD Edwards, PeopleSoft, and Siebel are registered trademarks of
Oracle Corporation and/or its affiliates. Other names may be trademarks
of their respective owners.
If you have received this software in error, please notify Oracle Corporation
immediately at 1.800.ORACLE1.
Type "help" for list of commands, "help <topic>" for detailed help
Connected to 1 server(s) out of a total of 1 server(s) in the enterprise
srvrmgr> list components
SV_NAME CC_ALIAS CC_NAME CT_ALIAS CG_AL IAS CC_RUNMODE CP_DISP_RUN_STATE CP_STARTMODE CP_NUM_RUN_TASKS CP_MAX_TASKS CP_ACTV_MTS_PROCS CP_MAX _MTS_PROCS CP_START_TIME CP_END_TIME CC_INCARN_NO CC_DESC_TEXT
siebelsrvr BusIntBatchMgr Business Integration Batch Manager BusSvcMgr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr BusIntMgr Business Integration Manager BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr SCCObjMgr_enu Call Center Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr CustomAppObjMgr_enu Custom Application Object Manager (ENU) CustomAppObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr DQMgr Data Quality Manager Dqmgr DataQ ual Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr EAIObjMgr_enu EAI Object Manager (ENU) EAIObjMgr EAI Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr InfraEAIOutbound EAI Outbound Server BusSvcMgr EAI Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr EIM Enterprise Integration Mgr EIM EAI Batch Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr FSMSrvr File System Manager FSMSrvr Syste mAux Batch Online Auto 0 20 1 1 2014-01-29 02:48:25
siebelsrvr GenTrig Generate Triggers GenTrig Workf low Batch Online Auto 0 1 2014-01-29 02:48:30
siebelsrvr JMSReceiver JMS Receiver EAIJMSRcvr EAI Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr MqSeriesAMIRcvr MQSeries AMI Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MqSeriesSrvRcvr MQSeries Server Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr MSMQRcvr MSMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SMQReceiver SMQ Receiver EAIRcvr EAI Background Online Auto 0 20 2014-01-29 02:48:30
siebelsrvr SServiceObjMgr_enu Self Service Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr ServerMgr Server Manager ServerMgr Syste m Interactive Running Auto 2 20 2014-01-29 02:48:20
siebelsrvr SRBroker Server Request Broker ReqBroker Syste m Interactive Running Auto 25 100 1 1 2014-01-29 02:48:20
siebelsrvr SRProc Server Request Processor SRProc Syste mAux Interactive Running Auto 2 20 1 1 2014-01-29 02:48:25
siebelsrvr SvrTblCleanup Server Tables Cleanup BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr SvrTaskPersist Server Task Persistance BusSvcMgr Syste mAux Background Running Auto 1 1 2014-01-29 02:48:25
siebelsrvr AdminNotify Siebel Administrator Notification Component AdminNotify Syste mAux Batch Online Auto 0 10 1 1 2014-01-29 02:48:25
siebelsrvr SCBroker Siebel Connection Broker SCBroker Syste m Background Running Auto 1 1 2014-01-29 02:48:20
siebelsrvr WorkActn Workflow Action Agent WorkActn Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WorkMon Workflow Monitor Agent WorkMon Workf low Background Online Auto 0 5 2014-01-29 02:48:30
siebelsrvr WfProcBatchMgr Workflow Process Batch Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr WfProcMgr Workflow Process Manager BusSvcMgr Workf low Batch Not Online Auto 0 20 0 1 2014-01-29 02:48:30
siebelsrvr WfRecvMgr Workflow Recovery Manager BusSvcMgr Workf low Batch Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eChannelCMEObjMgr_enu eChannel Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommunicationsObjMgr_enu eCommunications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCommWirelessObjMgr_enu eCommunications for Wireless Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eCustomerCMEObjMgr_enu eCustomer Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyObjMgr_enu eEnergy Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eMediaObjMgr_enu eMedia Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eEnergyOGCObjMgr_enu eOil Gas & Chemicals Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eSalesCMEObjMgr_enu eSales Power Communications Object Manager (ENU) AppObjMgr Commu nications Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
siebelsrvr eServiceObjMgr_enu eService Object Manager (ENU) AppObjMgr CallC enter Interactive Online Auto 0 20 1 1 2014-01-29 02:48:30
37 rows returned.
srvrmgr>
=======================================================================================================================================
Please suggest me what to do.
Thanks
Prabhakar -
Business Rule Error: Fact not found in the rule engine working memory, rule
I am trying to create a simple decision table with an input(ValidateInput) and a output(ValidateOutput). The input and output schemas have unbounded and nested elements(Parent-child relationship). When I create a condition(specific condition on input) and in the action I am asserting the output object. But when I run using EM it throws the following exception. It would be helpful if somebody could tell me what could be the problem. Please note when I set the output as ValidateInput object then it runs fine. Also it executes fine with ValidateOutput if it doesn't have unbounded(List) element inside it.
Error Message: {http://xmlns.oracle.com/OracleRules10/OracleRules10_DecisionService_1}operationErroredFault
Fault ID rules:211
Fault Time Jun 18, 2011 10:45:13 AM
Non Recoverable Business Fault :
Fact not found in the rule engine working memory, rule session execution failed. The rule session 270013 failed because an instance of the fact com.example.customer.ValidateResponse could not be found in the working memory of the rule session. This is most likely a rule modeling error. The decision service interaction expects the fact instance to exist in the working memory of the rule session. Check the rule actions in rule designer and make sure that a fact of the expected type is being asserted. If the error persists, contact Oracle Support Services. 270013
Edited by: reachsky on 18 Jun, 2011 9:57 AMIt's working now..I had to use Global variable to declare child element of the output variable and use the same during action.
-
Openshot + Blender: No frame was found in the Output from Blender
Can't get this to work. Anyone know why?
Using OpenShot version 1.4.0
blender -v
Blender 2.61 (sub 0)
build date: 2012-01-05
build time: 10:31:02
build revision: unknown
build platform: Linux
build type: Release
build c flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wcast-align -Werror=declaration-after-statement -Werror=implicit-function-declaration -Werror=return-type -Wstrict-prototypes -Wno-char-subscripts -Wno-unknown-pragmas -Wpointer-arith -Wunused-parameter -Wwrite-strings -Wno-error=unused-but-set-variable
build c++ flags: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -D__STDC_CONSTANT_MACROS -fopenmp -msse2 -msse -pipe -fPIC -funsigned-char -fno-strict-aliasing -Wall -Wno-invalid-offsetof -Wno-sign-compare
build link flags: -pthread
build system: CMake
Blender command: blender -b '/usr/lib/python2.7/site-packages/openshot/blender/blend/blur.blend' -P '/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py'
Traceback (most recent call last):
File "/home/user/.openshot/blender/fdd1c574-44dd-11e1-bf0d-54e6fc88c972/blur.py", line 150, in <module>
bpy.context.scene.render.file_format = params["file_format"]
AttributeError: 'RenderSettings' object has no attribute 'file_format'
No frame was found in the output from Blender
Blender render thread finished
Last edited by whoops (2012-01-22 09:47:37)yes, that is correct that it crashes with the new code when i have both made it a separate library function node and when i incorporated it into an existing code. the odd thing is that it actually seems to work now. i believe that i was using the wrong environment to call the new codes, which is why whenever i tried to revert to the original code previously, it still crashed. it seems that in order to be called, i need to use Deployment rather than Development and ppc instead of i386 in the active configuration and architecture in Xcode, respectively. while playing around with the iphone app, it must have reset my defaults to a non-labview friendly form. so now that i've got that part of the code working, i need to find out why it's still crashing on me. at first, i thought it must be the random number generator, but testing that separately in the code works just fine, so there must be something internal in the code. probably a memory allocation fault. but now that i can actually get everything running once more, i should be able to sort that issue out myself.
thank you very much for the help. sorry i didn't actually have anything to fix, unfortunately. i'm going to spend some time trying to debug this section of code to find where the fault lays. i may come back if i cannot find it in there, but hopefully it will not come to that.
take care and many thanks,
justin -
No EJBs found in the ejb-jar file
Hello all, we are thinking about migrating from JBoss to WebLogic server, so as a proof of concept I am trying to migrate a JBoss Seam web application to WebLogic server.
I have followed all the instructions here: http://docs.jboss.org/seam/2.0.2.SP1/reference/en-US/html/weblogic.html and I have set up ebvryhting that is needed in order to start the server (JMS queues, datasources, etc) but when the server starts and tries to load the web application I got the following error message
<29 ═Ύί 2010 4:34:51 ΉΉ EET> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'myapplication-ear' due to error weblogic.application.ModuleException: Exception preparing module
: EJBModule(MyApplication.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with t
he @Stateless, @Stateful or @MessageDriven EJB annotation...
weblogic.application.ModuleException: Exception preparing module: EJBModule(MyApplication.jar)
[EJB:011023]An error occurred while reading the deployment descriptor. The error was:
No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with t
he @Stateless, @Stateful or @MessageDriven EJB annotation..
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:467)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:507)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
Truncated. see log file for complete stacktrace
Caused By: java.io.IOException: No EJBs found in the ejb-jar file 'MyApplication.jar'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at l
east one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
at weblogic.ejb.container.dd.xml.EjbDescriptorReaderImpl.createReadOnlyDescriptorFromJarFile(EjbDescriptorReaderImpl.java:219)
at weblogic.ejb.spi.EjbDescriptorFactory.createReadOnlyDescriptorFromJarFile(EjbDescriptorFactory.java:93)
at weblogic.ejb.container.deployer.EJBModule.loadEJBDescriptor(EJBModule.java:1242)
at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:395)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
Truncated. see log file for complete stacktrace
The MyApplication.jar is where we keep all the models and we are using an exploded folder for the ear file. We have declared all the classes to be entities by using the @Entity and @Table annotations and we have also defined an interceptor in the ejb-jar.xml file (shown below).
<?xml version="1.0" encoding="UTF-8"?>
<ejb-jar xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/ejb-jar_3_0.xsd"
version="3.0">
<interceptors>
<interceptor>
<interceptor-class>org.jboss.seam.ejb.SeamInterceptor</interceptor-class>
</interceptor>
</interceptors>
<assembly-descriptor>
<interceptor-binding>
<ejb-name>*</ejb-name>
<interceptor-class>org.jboss.seam.ejb.SeamInterceptor</interceptor-class>
</interceptor-binding>
</assembly-descriptor>
</ejb-jar>
I have tried to compile everythign from scratch by using weblogic.appc but I am getting the same error: No EJBs found in the ejb-jar file 'ejbModule'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
Any ideas what is going on and how I can resolve the issue?
Regards
Panos
Edited by: 816483 on 29 Νοε 2010 6:53 πμHi John,
I am working on development an enterprise application using EJB 3.0 on Weblogic 10.
While developing, I am keeping all my classes (from ejb's as well as web) into APP-INF/classes directory. It is working fine for Web and ejb 2.0 packages, but ejb 3.0 packages, I get the following error when I keep my ejb 3.0 beans classes in APP-INF/classes directory.
No EJBs found in the ejb-jar file 'customer'. Please ensure the ejb-jar contains EJB declarations via an ejb-jar.xml deployment descriptor or at least one class annotated with the @Stateless, @Stateful or @MessageDriven EJB annotation.
One solution is to keep the classes under customer ejb directory, but I wan tto keep all the classes in APP-INF/classes directory so that when using Eclipse IDE I can output all compiled sources into APP-INF/classes directory.
Has anyone faced this situation? Any suggestions to fix this issue?
Maybe you are looking for
-
Connecting BI Pub with Microsoft SQL server 2008
I am trying to connect Microsoft SQL server 2008 as a Data source in BIP . Using below info : Driver Type : Microsoft sql server 2005 Database Driver class : com.microsoft.jdbc.sqlserver.SQLServerDriver Connection String : jdbc:sqlserver://TXHOURDB71
-
hi friends, 1.in ALE/IDOC wat are the methods and when do we use that methods like1. standalone 2. mesage cntrol 3.function module 2.when we extend basic idoc [add few fields ] how to trigger that segment if u have any learning material withexample
-
Cannot connect to Policy Server
Hi - I've just started using Policy Server and am trying to connect to it using the SDK. I've got a very small amount of source code which I took from the API documentation which should literally create the properties & then calls EDCFactory.connect.
-
Nexus7009 Howto Install NON NPE NX-OS on NPE installed system
I bought 2 SUP2Es; they are factory installed with Software BIOS: version 2.11.0 kickstart: version 6.2(2) system: version 6.2(2) BIOS compile time: 01/09/2013 kickstart image file is: bootflash:///n7000-s2-kickstart-npe.6.2.2
-
Scripting error appears again and again in Console - the cause?
The CONSOLE reports scripting errors around Xmail.osax, again and again. How do I figure out what's wrong? 8/30/10 Aug 30 2:46:02 PM [0x0-0x78078].com.apple.Console[1918] Console: OpenScripting.framework - scripting addition "/Library/ScriptingAdditi