No delta when changing Opportunity in CRM - 0CRM_OPPT_H

Hi,
I have discovered that when I create a new Opportunity in CRM the delta queue updates but not when I make a change in an old one.
The DataSource is 0CRM-OPPT-H and I have checked i SMQ1 and in RSA7 but not updates.
The DataSource is active in BWA5 and I have created and run an InfoPackage i BW where I used Initialize Delta Process and checked Initialize without Data Transfer. After that the queue appears in BWA7.
Is there anyone who can give me a clue whats wrong?
Regards,
Kerstin

Just try to create New opprtunity in CRM - and extraction again/ Everything should be fine after that.
Of cause - its not a solution for the source of this probleb< but it lets you to work with extraction from 0CRM_OPPT_H correctly.

Similar Messages

View change log for crm : opportunity management, activity management

hello
can anyone help me, i have been tracking down someone who changed an opportunity in crm but i cannot find in scu3. thanks.

Hi,
You can try your luck, by checking the requests filtered by dates if you know, and analyze it. If the person is not smart enough, you can get your hands on if the request is not deleted.
Not sure but you can try SLG1.
Regards,
Madde

Problem with delta on Business Partner on CRM

Hi all!!
I´m trying to send delta from Business Partners on CRM. I have activated the change pointers for the message type BUS1006, object BUPA_BUP and for table BUT000 on transaction BD52.
When I create a new Business Partner an entry must be inserted on BDCPV view and is not, however When I modify a Business Partner, its corresponding entry is inserted on view.
I have seen for other message types this doesn´t occur.
Can somebody help me, please???
Thanks in advance and regards.

Hi, Ralf
Thanks ! It worked ! I had to repair the function module. I assigned the points
Edited by: Frédéric GAUTHIER on Jan 29, 2010 11:12 AM

To create the follow up transaction automatically on status change in sap crm?

To create the follow up transaction automatically on status change in sap crm? If yes, how to make the setting for this?

Hi vishal,
As per the requirement transaction type is activity(ACTI) & sales order(TA). when the take order objective is complete system automaticaly craete a new activity of tele sales call or metting with wholesaler.
this is requirement of client.
now i am already create all type of transaction types of activity & sales order & create follow up transaction also. i have doam already create action profile also but when i am assign this action profile to transaction & try to create an sales order no follow up transaction could be create automatically. i think the condition is not right so please help me out in this. what should be the start & schedulec condition for this scenerio

Siebel Hangs up when changing the status of service request

Hi,
We are facing this typical problem since last 2 weeks. When closing the SR, CRM hangs for random(unable to detect a pattern till now) SRs.
The steps we follow to an SR is:
1. Enter the SR #
2. Change the status to "resolved"
3. Type the resolution in "resolution" text field and click on white space.
4. A new row gets generated with status "unscheduled"
5. Place a check mark near the newly generated row.
6. Change the status of the SR to "closed"
Now, some SRs get stuck at step 3. When clicking on white-space, CRM hangs.
We've tried everything from clearing IE cache / temp / cookies / increasing temp file size (to 5000 in IE6 and 1024 MB in IE7)
Even set-up a fresh system but no avail.
Even changed the primary internet link to secondary one but no help.
On top of that the SRs which make IE hang seem to be appearing randomly. Sometimes I can close 20 SRs at a stretch and sometimes 1-2 SRs get hanged every 4-5 SRs.
Once in a while an error pops up: "The selected record has been modified by another user since it was retrieved. Please continue (SBL-DAT-00523)"
No one else was working on the SR when such errors came.

You can ave a runitme event or workflow triggered that can generate such behavior.
First increase logging on your object manager (evtloglvl :) ) and look at any error message.
Second assess with your development team what automation has been setup ranging from script, Business Services, workflow to assist you in troubleshooting.
Best Regards
Evtloglvl

Transfer deltas on Business Partner from CRM to MDM

Hi all!!
I have to send the deltas on Business Partner from CRM to MDM. I know this is done with Change Pointers and the extractors.
I have the FM CRM_BUPA_EXTRACT to extract the data but I don´t know how do it.
Can someone guide me on this, please??? Is urgent.
I will be very thankful with your help.
Thanks in advance and regards,
Manuel

Hi Ahmed,
Check out the Delta Load settings on the CRM side.
Take input from the functional consultants around you.
Reward points if it helps.
Regards,
Amit Mishra

Delta Problems in Extraction of CRM data to BW

Dear Gurus, Arun,
We are using CRM 4.0 and BW 3.5 version
Process Chains are scheduled to extract
delta records every day from CRM to BW production server.
For the Opportunities report, we are facing a problem.
For a Customer "XYZ Corporation"
A correct Opportunity is displayed
with expected sales volume = 50,000 USD
and status = "WON"
and number of opportunities = 1.
But the same Opportunity report shows
Customer "XYZ Corporation"
also displays a record with
status "ACTIVE" and expected sales volume Amount 0 USD
and number of opportunities = 0
There is only 1 current transaction existing in CRM server
relevant to these 2 records displayed in BW .

This Error happens for 10 to 20% of total Opportunities displayed
Any Help is Appreciated / Rewards also : -))
Thanks,
Aby Jacob
=========

Dear Experts,
I am thinking of a Solution like this....
Since the data in Info Cube is looking Good,
and only some of the BW reports are having error records.
=====================================

In the BEx Query
I can filter the records having
"Opportunities = 0 "
Only records with Opportunity >= 1 will be displayed
Kindly advice if this is a Good solution ?
Any inherent defects in this Workaround plan ?
Thanks again,
Aby Jacob
=======

Problem to initialize delta queue of datasource from CRM 7.0.

Hi all,
I've some problem to initialize delta queue of datasource from CRM 7.0. After initialize the Init in BW, the delta queue was created but after the user changed data, this changed didn't populated into delta queue.
I tried the steps below but without any success. Anybody know how can I correct this issue?
Suggestion 3: Please check the following.
Please Check if the services have been generated in transaction GNRWB.
If they are not active(not marked 'X' before their names) then activate
the services following the steps here.
Go to transaction GNRWB
Select BUS_TRANS_MSG
Select (on the right, the services) : BWA_DELTA3, BWA_FILL, BWA_queue
Press Generate.
Also check for the following:
1. The delta should have been initialized successfully.
2. Confirm that all Bdocs of type BUS_TRANS_MSG
are processed with success in SMW01.
3. If there are queues in SMQ1 with erroneous status then activate
these queues.
In Transaction SMQ1 if there are Queues existing with
names beginning with CRM_BWAn (n is number) then
activate these queues in the same transaction.
4.a)If required activate the datasource
Go to transaction BWA5 > select the required datasource and
activate.
4 b) The Delta may not be active ,activate the delta in BWA7 by
selecting the name of the datsource and pressing the candle icon for
'activate delta'.
5. In BW system
Go to transaction RSA1 > modeling > infosources > select the
infosource > right mouse click on the selected
infosource > choose option replicate datasource
Activate the infosource.
6. Go to the scheduler for the infosource > select delta in the
update >choose the option PSA only (in the Processing tab)

Hi Peter,
Thank you for your answer.
But we need to find out what the reason for this import error is.
Our customer will not be very pleased to see that all IDocs from CRM system cannot be found in the IDOC folder.
IDX2 import of metadata is no issue.
We were successful for standard and customer Idocs here.
Additional information:
We are already importing Idocs from a SAP ECC 6.0 system into PI in another SWCV
successfully. So this is a CRM system specific issue in our environment.
Regards
Dirk
Edited by: Meinhard Dirk on Aug 27, 2010 10:30 AM

Change pointers in CRM for Product Data Extraction using MDM_CLNT_EXTR

Hi All,
We want to extract Product data in Delta mode using MDM_CLNT_EXTR.
I think change pointers are activated in CRM system in a different way. Please let me know steps to activate change pointers in CRM system for Product Data.
Thanks in advance for your help.
Regards,
Shiv

Hi,
   Please follow the below steps fro change pointers.
1.      In the Implementation Guide (IMG, transaction SALE), choose Modeling and Implementing ® Master Data Distribution ®Replication of Modified Data ® Activate Change Pointers ‑ Generally.
2.      Set the activation status Activate Change Pointers ‑ Generally, and save your entry (i.e BD61 Activate Change Pointers ).
3.      Choose the activity Activate Change Pointers for Message Types like ORDERS.
4.      Set the active indicator for the message type .
5.      Save your entries.
warm regards
Mahesh.

ORA-06502 on "Help Text" region when changing pages on a tabular form

Hello everybody,
We are developing an application on Apex 4.1.0.00.32. This application have some pages with tabular forms and these pages uses a page zero as template. In this page zero, we have added two sidebar regions: a list region to navigate on the application and a help text to describe how to use our application.
The problem occurs when the tabular split the records into pages (since it has more records that it can show on a single page). When the user clicks to change to another page, Apex raises an ORA-06502: PL/SQL: numeric or value error as described below:
Erro ao renderizar a região "Ajuda". ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
Informações Técnicas (visível somente para desenvolvedores)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: erro: erro de conversão de caractere em número numérico ou de valor
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Ajuda
error_backtrace:
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: em "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
Obs: Our database is in Brazilian Portuguese, so I guess it will be hard for some people to understand the first two lines! :)
We have tried to change the pagination style of the tabular form and change the region model of the help text but the problem still happens.
Does anyone an ideia about what this may be?
Thanks in advance!

I am getting the exact same message, to the line number, also in APEX 4.1.0.0.32.
Occurs when changing pages in a classic report, Standard region template, select list pagination, when selecting a different pagination set.
In English:
Error during rendering of region "Matched Participants Help & Hints".
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Technical Info (only visible for developers)
is_internal_error: true
apex_error_code: APEX.REGION.UNHANDLED_ERROR
ora_sqlcode: -6502
ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error
component.type: APEX_APPLICATION_PAGE_REGIONS
component.id: 2
component.name: Matched Participants Help & Hints
error_backtrace:
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654
ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204
There are no conditions on the region, and no date string within the Help text. Some HTML tags, that's it.
The Help region renders fine the first time.
The Debug info does not help any:
3.798360.00062Computation point: After Box Body4
0
3.798990.00081Processes - point: AFTER_BOX_BODY4
0
3.799790.00068Region: Matched Participants Help & Hints4
0
3.800470.00213Region rendered dynamically because request was not null4
0
3.802590.00096Add error onto error stack4
0
3.803550.00084...Error data:4
0
3.804400.00084......message: Error during rendering of region "Matched Participants Help & Hints".4
0
3.805240.00084......additional_info: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.806080.00081......display_location: ON_ERROR_PAGE4
0
3.806890.00081......is_internal_error: true4
0
3.807700.00084......apex_error_code: APEX.REGION.UNHANDLED_ERROR4
0
3.808540.00082......ora_sqlcode: -65024
0
3.809350.00234......ora_sqlerrm: ORA-06502: PL/SQL: numeric or value error: character to number conversion error4
0
3.811700.00082......error_backtrace: ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 3654 ORA-06512: at "APEX_040100.WWV_FLOW_DISP_PAGE_PLUGS", line 4204 4
0
3.812510.00081......component.type: APEX_APPLICATION_PAGE_REGIONS4
0
3.813310.00110......component.id: 24
0
3.814420.00099......component.name: Matched Participants Help & Hints4
0
3.815400.00076...Show Error on Error Page4
0
3.816160.00344......Performing rollback4
0
3.819610.00225Processes - point: AFTER_ERROR_HEADER4
0
3.821850.00268Processes - point: BEFORE_ERROR_FOOTER4
0
3.82453-End Page Rendering
Any thoughts on where to poke around for this one?
Thanks - Karen

How to update the table when change list item in classic report

hi ,
i worked with apex 4.2 and i create normal classic report with one select list(named loved)Column ,now i want to update table when user change the list with new value ,i can't create dynamic action to do this,i create check box with primary key and loop for check item to update the table but i can't get the value of list item. and for more speed the user want to do this when change the list value.
my question
1- how to do this by javascript and get the value from list item and update the table with new value
2- is i must use API to create list item so i can get the value of item in report or what.
Thanks
Ahmed

I coded the following to give you direction:
1. In the "Element Attributes" section of the DEPTNO column, I call a javascript function as:
onchange = "javascript:updateTable(this);"2. I wrote a simple javascript function that shows an alert when the user changes the select list as:
<script language="JavaScript" type="text/javascript">
function updateTable(pThis)
var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
alert('Row# - '+ vRow + ' has the value - ' + pThis.value);
</script>Now, you can call a AJAX on-demand process inside the javascript function to update the database value.

How do I output the smoothest video when changing or mixing frame rates from the original footage?

I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

Error message when changing from portrait to landscape when printing

I receive an error message when changing from portrait to landscape when trying to print. How do I resolve this issue?

Hi hillclimbing,
Can you please let me know the exact error message you see as that would be helpful.
Does this occur with all the pdf files.
What OS and Acrobat version are you using?
Regards,
Rave

How to restrict the change access in CRM for OLTP orders

Hi Guru's,
Please let me know how to restrict the change access in CRM for the orders that are created in ECC. The ECC orders will only for display in CRM but not for change,
We have the orders that are created in ECC, it will flows to CRM and should restrict the access to get in to the change mode in CRM but as of now CRM system is allowing change mode for ECC orders and ending up with errors.
Is there any additional middleware parameter that needs to be added to SMOFPARSFA table to get this functionality! Please advice! Thank your for your help.
Regards
Suneel

Hi.
You can use the PFCG role to control if the user is able to create, change, delete or only display a business transaction type.
Regards.

Have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.

have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely

Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371>

No delta when changing Opportunity in CRM - 0CRM_OPPT_H

Similar Messages

Maybe you are looking for