No Dialog Box at "Connect As" for Server

I have not seen this issue mentioned elsewhere, so I thought I'd post. I will update with specifics when I get to the office. Here's the little I know:
The user's client, a late-model MacBook running Yosemite, connects to the network and can see the server, a recent-ish Mac Mini running Server 3/Mavs, listed in the Finder window. When you click the item, it reads "Connection Failed". When you click "Connect As", the status changes to "Not Connected". But there's no dialog box asking for user and password. Individual client machines in the network also appear in the Finder window, and those connections behave normally.
This is the only client machine with this behavior; another similar machine also running Yosemite connects without issues. I believe this is the first time problematic client machine attempted to connect to the server, while the one that works normally had connected many times previously before and after its upgrade to Yosemite.
Thanks in advance for any ideas. I will update with specific versions in a couple of hours.

DISREGARD: User was able to connect this device with no issues as of this morning.

Similar Messages

Never recvd verification code, in PHOTOMAIL dialog box it is asking for one when trying to email pictures,never saw any codes when setting this up

verification code, never received it when setting up contacts to email pictures, in PHOTOMAIL dialog box it is asking for one to verify my email address and said it was sent to my email, went back and checked and there wasn't anything there, where is it or what do I need to do now????

Does the account you are using have admin rights? I found this :
http://support.apple.com/kb/HT2397
+In Mac OS X 10.3 Panther and later, users with administrative privileges aren't prompted to change the region the very first time a DVD-Video disc of a single region is inserted. Instead, the region of the DVD drive is automatically set to the region of the DVD disc that was inserted. Accounts that don't have administrative privileges must authenticate with an administrator account name and password, because changing the drive's region code requires administrative privileges.+
Sounds like it might be worth a try from an admin account first.

Popping up a dialog box on client side for authentication in a proxy server

hi all,
we have wriiten a code for proxy server.now we want to add the authentication code in the same which will authenticate client by popping up a dialog box on the client side.though no code runs on the client side.only the client has to open the browser and enter the credentials.
we dont know how to pop up this authentication window on the client side when he requsts for the service.
Its almost like a SQUID where the pop up box appears.
The code for our proxy server is
import java.net.*;
import java.io.*;
public class BasicProxyServer {
     private static int serverPort;
     private static String primaryServerHost;
     private static int primaryServerPort;
     // 1st arg: port to listen on     // 2nd arg: primary server IP     // 3rd arg: primary server port
     public static void main(String [] args) {
          serverPort = Integer.parseInt(args[0]);
          primaryServerHost = args[1];
          primaryServerPort = Integer.parseInt(args[2]);
          BasicServer bserv = new BasicServer(serverPort,primaryServerHost,primaryServerPort);
class BasicServer extends Thread {
     private int serverPort;
     private String primaryHost;
     private int primaryPort;
     private ServerSocket servSock = null;
     public BasicServer(int port, String primSrv, int primPort) {
          serverPort = port;
          primaryHost = primSrv;
          primaryPort = primPort;
          start();
     public void run() {
          Socket clientSock = null;
          Socket primaryServerSock = null;
          try {
               servSock = new ServerSocket(serverPort);
          catch (IOException e) {
               e.printStackTrace();
          while(true) {
               try {
                    clientSock = servSock.accept();
                    primaryServerSock = new Socket(primaryHost, primaryPort);
                    PipedInputStream fromClient = new PipedInputStream();
//BufferedReader br= new BufferedReader(new InputStreamReader(clientSock.getInputStream()));
//String ipline=br.readLine();
//History hi=new History();
//hi.writeHistory(ipline);
//try{
//hi.getHistory();
//catch(ClassNotFoundException cne){
// System.out.println(cne);
                    PipedOutputStream toMainServer = new PipedOutputStream(fromClient);
                    PipedInputStream fromMainServer = new PipedInputStream();
                    PipedOutputStream toClient = new PipedOutputStream(fromMainServer);
                    Talk clientToMainServer = new Talk(clientSock, fromClient, primaryServerSock, toMainServer);
                    Talk mainServerToClient = new Talk(primaryServerSock, fromMainServer, clientSock, toClient);
                    clientToMainServer.start();
                    mainServerToClient.start();
               catch (IOException e) {
                    e.printStackTrace();
protected void finalize() {
if (servSock != null) {
try {
servSock.close();
} catch (IOException e) {
e.printStackTrace();
servSock = null;
class Talk extends Thread {
     private Socket incoming;
     private Socket outgoing;
     private InputStream in;
     private OutputStream out;
String urlrequest="";
     private InputStream from;
     private OutputStream to;
     Talk(Socket inSock, InputStream in, Socket outSock, OutputStream out) {
          this.in = in;
          this.out = out;
          incoming = inSock;
          outgoing = outSock;
     public void run() {
          int aByte;
          try {
               from = incoming.getInputStream();
               to = outgoing.getOutputStream();
               while(( aByte = from.read()) != -1 ) {     //read from socket
                    out.write(aByte);
if(new Integer("3128").equals(incoming.getPort()))
urlrequest=urlrequest+out.toString();
urlrequest=urlrequest+incoming.getPort()+outgoing.getPort();
// write to pipe`
                    // read the byte from the pipe
                    to.write(in.read());          // write it to the output socket stream
                    to.flush();
System.out.println(urlrequest);
               to.close();
               from.close();
               if(incoming != null) {
                    incoming.close();
                    incoming = null;
               if(outgoing != null) {
                    outgoing.close();
                    outgoing = null;
          catch (SocketException e) {
          // there is one for a closed socket. Seems to have no effect.
          //     e.printStackTrace();
          catch (IOException e) {
               e.printStackTrace();
waiting for reply.....

Install a java.net.Authenticator.

Open dialog box window with checkboxes for each child record - Please Help

Hello Everybody
I have a 10g form with master record and 20 child records. In the child record form, currently there is a “Notes” Editor, which pops up when user click the “Edit” button. In the “Notes” editor, user enters remarks if anything is missing. For example, typical remarks will be: Statement is missing, LOC paper is missing etc.
Now, I would like to replace “Notes” editor with a dialog box. In the dialog box , I would like to add checkboxes with values “Statement is missing” and “LOC paper is missing” etc. along with “Notes” field. The user can select checkboxes. The value of the checkboxes should go in the “Notes” field with the ability to edit it. This way, user doesn’t need to type the most common notes every time.
I have created a “NewNotes” dialog box with checkboxes and multiline text Item. It is pops up when I click on the button. I have also created to WHEN_CHECKBOC_CHANGED trigger for each checkboxes so that the its value will go in a multiline text item.
But, I am not sure how I can link “NewNotes” dialog box to the each record in child record block. I would really appreciate it if anybody could give me some idea.
Thanks,

if i understand correctly you have a note item (based on table) on every child record? when you open the dialog box: how do you put data from notes to dialog box? in the same way as you can write it back ...

Open Dialog box: disable image preview (For large images, it's SLOOOWWWW)

Open Dialog box in column view:
Can I disable image preview?
For large images, it's SLOOOWWWW !!!!!
( I often work with 8000 x 3500 panoramic images )

William
Mostly this is a problem in PhotoshopOK, my Photoshop is still a Classic version. I was looking at one or two others, like GraphicConverter, but the only pref there seems to be to generate a Preview if one doesn't exist.
I'll look some more—it's irritating me now

Save dialog box for text and pdf files

Hi,
I am using CRM UI framework for developing my components.
Currently i have a hyperlink for a file. On click of the hyperlink i want the Save dialog box to appear with SAVE/OPEN/CANCEL options. For Word/Excel/PPT files, dialog box appears. However for txt/PDF files, dialog box does not appear.
URL looks like the following:
http://uxcia0g.wdf.sap.corp:50026/sap/bc/contentserver/000?get&pVersion=0045&contRep=RPS_DB_02&docId=80215A5C348E1DEE8A9EC8FFDED05E54&compId=chk.pdf&content_disposition=attachment.
Could you please help me to resolve this issue?
Regards,
Vinay

First of all, you need an app on the iPad that can read those files that you want to transfer. Adobe Reader and iBooks are two free apps that will read PDF files. Adobe Reader is much more robust than iBooks as it offers so many more features like renaming files, creating folders, annotating, highlights, etc.
Download Adobe Reader in the App Store. Then read this about file sharing with iTunes.
iOS: About File Sharing - Support - Apple
There are other ways to get files to the iPad, like email, DropBox and some other apps that let you mount your iPad like a flash drive.
This should be helpful as well.
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad

Dialog box pblm in for loop

pl check this code sample at once..
for(int i = 0 ;i< sDoc.sAwData.smVec_List.size() ; i++)
     st.execute(sqlQuery);
     System.out.println("Tables Created ");
     JOptionPane.showMessageDialog (this,"Tables Created","Tables Title",JOptionPane.WARNING_MESSAGE);
i am executing the sqlQuery in for loop
as i am keeping the st.execute(sqlQuery) in for loop usually it will iterates that many no of times according to "i";
i also have to display the Dialog box using JOptionPane at one time only.
when the sqlQuery is successfully executed.
as i kept that dialog in for loop it is displaying morethan one time according to "i";
is there anyway to display that dialog at single time ??
pl give me some suggestions and if possible along with some sample code using for loop
thanks in advance

If you want to display the dialog box only once, put
it outside the loop!!Thankyou
but the pblm is when i keep that dialog box in outside the for loop, that will display even the sql query fails to execute the statement.
i want to display that dialog if the sql query executing
successfully.
thanksinadvance
yours
rajesh

Why is the dialog box for storing a bookmark so small and not resizeable??

I have about two dozen folders full of bookmarks, and some of them have sub-folders. When I go to bookmark a page, the dialog box is ridiculously small, for n apparent reason. If it started out much larger, or if I could resize it to the full height of my screen, it would be so much easier to use.
Also, it would be so much easier to provide feedback if you just had a "Suggestion Box" conspicuously located on your website.

'''Help > Submit Feedback ....''' right in Firefox.
https://addons.mozilla.org/en-US/firefox/addon/add-bookmark-here-2/ <br />
Has a resizable view port for the folders.

Dialog Boxes - For example Preferences Will Not Fit Screen

I am having a problem with Adobe Version 8 preset dialog boxes being too large for my screen. I also have the same problem in Quicken so it may not be an Adobe problem. In boxes such as Preferences or Properties when opened I can not access the bottom portion of the box. Particularly a problem when what is being hidden is the command button such as OK or SAVE or FINISH or CANCEL. The boxes open in a preset size and I can not modify the box size. Nor can I drag the header bar far enough off the screen to access the bottom command buttons. Use that lovely MS Vista. Might anyone have an idea on where to start? Danke Schoen!

I am using a Sony Vaio laptop. It uses a Generic plug and play monitor.
The screen size is 15 inches. Resolution is 1280 by 800 in true color 32
bit mode. Changing the screen resolution does not affect the problem in any
manner.
Knowing shortcut keys would not help. You can not see the bottom command
buttons, therefore which shortcut key do you use or is one even needed.
If the dialog boxes were resizeable then I would not have a problem. I went
looking for some setting in Version 8.1.5 that would allow me to resize
these boxes but it was like looking for a needle in a haystack.
I am updating to Version 8.1.6 to see if the newer version does anything to
help. And yes I the monitor drivers are all current.
James F. Thoma
. . . at home in the hills of East Tennessee . . .

Create dialog box for user/passw

Hello,
I need to create a dialog box where you ask for the user and password.
The idea is create a FM that launch the pop up and until user doesn't fill user/passw corerctly he can't continue.
I am not sure how do the popup dialog box and how do that dialog remains until a good user/passw is introduced.
Thx in advance

Hi!
Try these fm-s:
G_CHECK_PASSWORD
SSFH_PASSWORD_PROMPT
and any password ones in SE37...
Regards
Tamá

Shortcut for selecting non-default button in dialog boxes

I seem to remember that there was a keyboard shortcut many OSs ago. I can't seem to find it or replicate it. Particularly, I would like to choose the non-default button in a dialog box in Acrobat Pro for productivity's sake.
Thanks, Jon

Hi Jon, and a warm welcome to the forums!
No way to tell if Adobe follows the standard, but TAB generally moves through the Dialog buttons & Space Bar selects that choice where Enter/Return chooses the default blue button. Sometimes the CMD key + the first letter of the button selects it iirc. Sometimes the esc key passes for Cancel.
If it's not, in Sys Prefs change if the “Full keyboard access” under keyboard shortcuts is set to use text boxes and lists only, switch it to “All controls”.
http://forums.macnn.com/90/mac-os-x/401945/keyboard-shortcuts-for-dialog-pop-ups /

Why does it take so long for the Open, Save, or Save As Dialog Boxes to Open?

I'm having a problem throught CS6 with the Open, Save, or Save As dialog boxes not opening for a period of time after clicking on the desired functions. It can take over a minute just to get the Open dialog box up to browse for a file. Eventually, the dialog boxes open, but during the time that it's trying to open, the program is unresponsive. It is happening with all of my CS6 programs. I have unistalled and reinstalled with no fix. The programs are updated. Anyone else having this trouble? Any solutions?

Thanks for your response. The system is a Windows 7 64-bit system with 4GB RAM installed. I am not trying to save anywhere in particular. By default, it would open to the user's documents, and does eventually, but it currently just sits for about a full minute before doing anything. This machine was saving properly when CS6 was first installed about 5 months ago.
I've checked for unconnected network drives. I've also renamed the Illustrator preferences file based on a reccomendation that I found elsewhere. However, neither of these helped.
I can provide screenshots or anything else that's needed.

Crystal Report dialog box issues

I am very new at .NET, and this is my second post to this forum.
I've created a Crystal Report within a project using Visual Studio 2005 Professional Edition, on a Windows XP machine.
The report is handled by a CrystalReportViewer, which has its ReportSource set to the report.
Via a dialog box, the report asks for a signon and password for a SQL Server database. Then, via a second dialog box, it prompts for a parameter required by the report.
All of this works ok, but I have two issues:
1) I would like to set the database signon and password so that the user doesn't have to enter them each time he runs the report.
2) If the Cancel button is clicked on any of the dialog boxes, it renders the report unusable until I shut down the application and reopen it.
I have looked online for two days, but have not been able to find a solution to these above problems. It is probably simple, but I'm not seeing it.
I am attaching the relevant code for the button that runs the report.
    Private Sub cmdChecks_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles cmdChecks.Click
            CrystalReportViewer2.DisplayToolbar = True
            CrystalReportViewer2.Visible = True
            CrystalReportViewer2.Height = 600
            CrystalReportViewer2.Width = 1000
            CrystalReportViewer2.Left = 10
    End Sub
Can anybody help me with this?
Thank you!

Hi,
I would like you to know the code of the logon based on the object models-
If you are using the ConnectionInfo then use the below code:-
//For web application
ConnectionInfo crConnection = new ConnectionInfo();
// Connection Information
crConnection.ServerName="D-2818-W2K";
crConnection.DatabaseName="Northwind";
crConnection.UserID="sa";
crConnection.Password="sa";
crReport.Load(Server.MapPath("CrystalReport1.rpt"));
Tables crTables=crReport.Database.Tables;
foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
          TableLogOnInfo crTLOI = crTable.LogOnInfo;
          crTLOI.ConnectionInfo=crConnection;
          crTable.ApplyLogOnInfo(crTLOI);
          crTable.Location=crTable.Location;// for multiple table selection
CrystalReportViewer1.ReportSource=crReport;
====================================================================================
//For desktop application
ConnectionInfo crConnection = new ConnectionInfo();
// Connection Information
crConnection.ServerName="D-2818-W2K";
crConnection.DatabaseName="Northwind";
crConnection.UserID="sa";
crConnection.Password="sa";
crReport.Load(Application.StartupPath + "//CrystalReport1.rpt");
Tables crTables=crReport.Database.Tables;
foreach(CrystalDecisions.CrystalReports.Engine.Table crTable in crTables)
          TableLogOnInfo crTLOI = crTable.LogOnInfo;
          crTLOI.ConnectionInfo=crConnection;
          crTable.ApplyLogOnInfo(crTLOI);
          crTable.Location=crTable.Location;// for multiple table selection
CrystalReportViewer1.ReportSource=crReport;
=====================================================================================
If using ReportDocument object model
//For web application
ReportDocument crReport= new ReportDocument();
crReport.Load(Server.MapPath("CrystalReport1.rpt"));
crReport.SetDatabaseLogon("sa","sa");
CrystalReportViewer1.ReportSource =crReport;
=====================================================================================
//For desktop application
ReportDocument crReport= new ReportDocument();
crReport.Load(Application.StartupPath + "//CrystalReport1.rpt");
crReport.SetDatabaseLogon("sa","sa");
CrystalReportViewer1.ReportSource =crReport;
To download sample code click [here|https://boc.sdn.sap.com/codesamples].
You can also take help from [Dev library|https://www.sdn.sap.com/irj/boc/sdklibrary]
Hope this helps!!
Regards
Amit

Mailbox Cannt connect to the Server 2013

hi,
I cannt connect mailbox via outlook but owa\activesync work good.
I tried to reaper the mailbox\move to another DB and connect with 2 outlook version 2010SP2 and 2013
the problem its only with specific mailbox all other mailbox works.
the outlook get the [email protected] from the server and the mailbox details but cannt connect to download the folders\mails

If you are unable to connect Outlook for user
Try to configure the user profile in different desktop and different outlook version (May the desktop and client have hardened or blocked). It is always best to perfrom the test in some other computer since the impact is for only one user
Check out the legacyexchangedn - Using LDP.exe. Use the LDAP search "legacyexchangedn=/o=.....".
Perform the test using Test-Mapiconnectivity as follows
Test-MAPIConnectivity -Identity AD\Raji
Ref: http://technet.microsoft.com/en-us/library/bb123681%28v=exchg.150%29.aspx
Perfrom the test using Test-OutlookConnectivity using the below syntax
Test-OutlookConnectivity -ProbeIdentity "OutlookRpcCTPProbe" -MailboxID [email protected]
Ref:http://technet.microsoft.com/en-us/library/dd638082%28v=exchg.150%29.aspx
Also check if there is any duplicate address in your AD - http://support.microsoft.com/kb/318774/en-us
And also check the below settings
In Control Panel, open the Mail item.
Click Show Profiles.
Select your profile, and then click Properties.
Click E-mail Accounts.
Select the Microsoft Exchange Server account, and then click Change.
In the dialog box that contains your mailbox server and user name, click More Settings.
In the Microsoft Exchange dialog box, click the Security tab.
Click to select the Encrypt data between Microsoft Office Outlook and Microsoft Exchange check box, and then click OK (The
screen shot for this step is listed below).
Exchange Queries

Prevent Login Dialog Box Popup In EssVConnect

Using VBA code to automate worksheets. Our site updates and switches servers about every 2 hours. Code works great when 'server' is up but when switched and we don't know which one is active, the EssVConnect pops up the Login Dialog box requiring us to switch server names and press OK. This means it is not automated. We want to prevent the box from appearing and get a bad return code instead so we can cycle through all the servers until we find one that is active. Documentation implies it will do this. We have tried setting all messages off (EssVSetGlobalOption(5, 4)) but that does not seem to work for the dialog box. Any suggestions?

I am trying to remember if there are any issues and I think there is.. If I remember correctly, the EsbInit will not do what you want if called from within Excel VBA when the Essbase add-in is loaded because the C API used within the Excel add-in has already initialized the API with the wrong setting. You could try it..
Further, the result of EsbAutoLogin is to get an context handle (hCtx). The problem is, then, that you can't use that context handle to do Excel add-in operations. The opposite situation, where you can get the hCtx from a worksheet connected to Essbase is not only possible but is the recommended way to combine the VB API with the Excel add-in. Look at the GetHctxFromSheet function to see how to use that capability.
The only solution I can think to do what you want to do is to create an ActiveX EXE in VB 6 and have that ActiveX EXE call the EsbInit, etc and validate the server you need to login at a specific time. As it runs in a separate process and loads the Essbase API dlls at your command (EsbInit), you can control everything there. You can then use the CreateObject command in VBA to instance the object and call methods on it; your method will check the login for a specific server can could return the appropriate error message for you so you could validate which server is currently available and then call that server in your EssVConnect call.
Tim Tow
Oracle ACE
Applied OLAP, Inc

No Dialog Box at "Connect As" for Server

Similar Messages

Maybe you are looking for