No Documents were created for in this run

Dear Friends:
Using T.code AFAB,I entered Co.code,Fiscal year 2006,depreciation run-003,planned post run,list of assets.
I got the message.
Error Analysis was ended, Refer to error log
No Documents were created for in this run
According to posting cycle, you should post period 001 next
Message no. AA683
Diagnosis
You cannot post depreciation in the period specified, as this will miss out a posting period.
System response
No posting can be made in this period.
Procedure
According to the posting cycle, you should post period 001 next. Either enter period 001, which corresponds to the posting cycle, or
request an unplanned posting run explicitly for this parameter.
If there is no Errors, How come no Documents were generated.Please advise.
Thanks&regards
Msreddy

Hi,
and have a look here: <a href="http://help.sap.com/saphelp_47x200/helpdata/en/4f/71ea3a448011d189f00000e81ddfac/frameset.htm">Update of Depreciation</a>
Andreas

Similar Messages

MPS run, planned orders were created for all levels ?

Hello PP members
I ran a small scenario
material    MRP Type     Low Level    SG           M/T Type
A      M0         000             40              FERT
B               PD              001              40             HALB
c               PD              002               10             ROH
Maintained PIRs(MD61) for material A, and ran MD41( Single Item Multi level Planning)
As material A is an MPS item, I was expecting that it should create planned orders only for material A, but in this MPS run it created planned orders for material B & C. (Looked into MD04, where I see planned orders were created
for all the levels)
As per the MPS run, it will plan only for one level of BOM (in this scenario for material A)
Any suggestions, why planned orders were created for material B & C
please clarify

Just check
System must have created a dependent requirement planned order and not the planned order for requirement you put in demand management for B and C
i.e. if you enter a demand in MD61 for B and C, run the transaction, system will not consider this requirement during MPS run. MPS run will consider the requirement if the requirement for the child is comming from parement where parent is MPS item.
Hence you need to run MRPm for B amd C if teh requirement(not dependdent requirement from A) is to be considered.
I hope you are clear
Edited by: Rajesha Vittal on Jan 28, 2008 8:06 AM

DAC error:'No Pools were created for this ETL'

Hi
when I excute a plan in the DAC, it was failed, and the error message is
'No Pools were created for this ETL. Make sure you have atleast one database connection defined for this ETL Definition.'
so what maybe caused this problem?

Hello Vitas,
Looks like its been a while, I am also facing the same issue and could you let us know how you were able to resolve this ?
DAC is up and running, all the connections are good. We were able to run Executions plans till today and facing this error all of a sudden. Below is the error message in the log file. Any help is appreciated.
START OF ETL
739594 INFO Thu Oct 17 14:41:43 CDT 2013 Creating Connection Pool.
739595 FINE Thu Oct 17 14:41:43 CDT 2013 Inside CreateConnectionPool: got a resultset of dbconnections.
739596 INFO Thu Oct 17 14:41:43 CDT 2013 No Pools were created for this ETL. Make sure you have atleast one database connection defined for this ETL Definition.
739597 SEVERE Thu Oct 17 14:41:43 CDT 2013 MESSAGE:::No Pools were created for this ETL. Make sure you have atleast one database connection defined for this ETL Definition.
EXCEPTION CLASS::: com.siebel.etl.engine.bore.NoConnectionPoolCreatedException
com.siebel.etl.engine.core.ETL.createConnectionPool(ETL.java:1051)
com.siebel.etl.engine.core.ETL.thisETLProcess(ETL.java:230)
com.siebel.etl.engine.core.ETL.run(ETL.java:659)
com.siebel.etl.engine.core.ETL.execute(ETL.java:911)
com.siebel.etl.etlmanager.EtlExecutionManager$1.executeEtlProcess(EtlExecutionManager.java:210)
com.siebel.etl.etlmanager.EtlExecutionManager$1.run(EtlExecutionManager.java:165)
java.lang.Thread.run(Thread.java:619)
739598 INFO Thu Oct 17 14:41:43 CDT 2013
739599 INFO Thu Oct 17 14:41:43 CDT 2013 The ETL took 0 Minutes
739600 INFO Thu Oct 17 14:41:43 CDT 2013 Returning an instance of EmailManager...
739601 FINE Thu Oct 17 14:41:43 CDT 2013 At the start of EmailManager.dispatch
739602 INFO Thu Oct 17 14:41:43 CDT 2013 EmailManager.dispatch : Created a message...
739603 FINE Thu Oct 17 14:41:43 CDT 2013 Starting Inside EmailManager.wrapMessage()
739604 FINE Thu Oct 17 14:41:43 CDT 2013 Inside EmailManager.wrapMessage(): template read and closed
739606 INFO Thu Oct 17 14:41:43 CDT 2013 Reducing repository pool size...
739607 FINE Thu Oct 17 14:41:43 CDT 2013 CONNECTION_ISSUE Repository entering restorePoolSize
739608 FINE Thu Oct 17 14:41:43 CDT 2013 CONNECTION_ISSUE Repository no pool size decrease required
739609 INFO Thu Oct 17 14:41:43 CDT 2013 Releasing connection pools...
739610 INFO Thu Oct 17 14:41:43 CDT 2013 Releasing the concurrency manager...
739611 SEVERE Thu Oct 17 14:41:43 CDT 2013
END OF ETL

No data media can be created for the proposal run - Bacs Payment

Hi,
When i schedule program RFFOGB_T for bacs payment and select proposal run only i get the following error "No data media can be created for the proposal run". But when i execute the program with out selecting the check box " Proposal run only...a file was getting generated...Could any onle pls help me resolve this problem.
With Best Regards,
M.Naveen Kumar

The post has been answered

FCN Document not created for SO : Message SY499-Urgent

While Saving delivery or doing PGI or while processing billing document i am getting below info message.
"FCN Document not created for SO " Message SY499.
I dont know why this message started coming now. I have added my country in VI49 settings. I wonder that due to that this message is coming.
I dont want this message to come whiel delevery processing. Pl. let me know how can this be possible.
Regards,
Vijay

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

How to check whether follow on document is created for sc or po,is there any table or fm available?

How to check whether follow on document is created for sc or po,is there any table or fm available?

Hello Venu
Check FM: BBP_PD_SC_GETDETAIL and BBP_PD_PO_GETDETAIL table E_HEADER_REL
Check this: SRM Shopping cart and PO tables link
Regards

Acctg document not created for cancellation invoice

Hi all,
We have a vehicle sales order created with payment card. The SO contains one item for vehicle and one item for parts. The items were delivered and invoiced separately. Hence, SO has one vehicle sales invoice (VSI) and one parts sales invoice (PSI).
The standard procedure was to post VSI first before the PSI. Accounting documents have been created when both invoices were posted. However, there was a need to cancel the PSI. When this was done, cancellation invoice was created but there was no accounting document posted for the cancellation.
I tried simulating the scenario in our test server and cancelled VSI 90000081 first before cancelling PSI 90000082 to test if this can be an alternative solution. Cancellation for VSI was posted successfully but error persists for PSI cancellation.
Order 67 06/19/06 Completed
. Delivery 80000081 06/19/06 Being processed
.. Picking request 20060619 06/19/06 Completed
.. GD goods issue:delvy 4900000293 06/19/06 complete
.. Invoice 90000081 06/19/06 Completed
... Accounting document 2000077 06/19/06 partly cleared
.. Invoice cancellation 90000084 06/19/06 Completed
... Accounting document 2000079 06/19/06 partly cleared
. Delivery 80000082 06/19/06 Completed
.. Picking request 20060619 06/19/06 Completed
.. GD goods issue:delvy 4900000294 06/19/06 complete
.. Invoice 90000082 06/19/06 Completed
... Accounting document 2000078 06/19/06 Not cleared
.. Invoice cancellation 90000083 06/19/06
.. Invoice 90000085 06/20/06 Blocked
Accounting status of 90000083 (where error occurs) in VF03->Header->Details is set to K or <b>Accounting document not created (authorization lacking)</b>.
Any inputs? Thanks in advance.

Hello Sheila,
sorry - my first answer was in mistake - Status K means:
"The transaction is processed using payment cards. The order, however, does not contain valid authorization.
This problem occurs in billing documents for follow-up deliveries."
Could you check this ? Last way would be to set a breakpoint into the FM 'RV_ACCOUNTING_DOCUMENT_CREATE'
and trigger this via VF02 -> Release to accounting.
Regards Wolfgang

Accouting document not created for PGI

Dear All,
I have done PGI for Delivery document.
The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
While PGI material document has been created but accounting document has not created.
Waiting for your valuable suggestion
Thanks & Regards,
Ratish

thanks for the reply.........
for movement type 601 and without special stock indicator accounting document has been created along with material document.
but for the MTO Scenario the material which are dispatch with special stock indicator "E" with movement type 601. for this scenario material document has been created without Accounting document.
Waiting for the reply.................
Regards,
Ratish

Profit center document not created for initial stock upload

Hi Gurus
We have created initial stock upload for one of the inventory items through movement type 561.Though the profit center was populated in the line items the profit center document has not been created and when we go and run balance sheet profit center wise there are no results for display? Any suggestions ?

Hello,
Check your 3KEH Settings
Check your OKB9 account determination
Make sure you have profit center number ranges in GB02
Regards,
Ravi

Follow on Document not created for the Purchase Request.

I can able to create a purchase request for the material with quantiy equal to or more than 16. If I create a purchase request for the same material with quantity less than 16., Follow-on Document not getting created. I checked the transaction BBP_PD, it does not show other status like Shopping card ordered , approved, Items in Transfer Process and Follow-on Document created. Any Reason for this.?

Hi,
please check if there is any tolerance enabled
Regards

Accounting document not created for the billing document in CIN

Hi Experts,
I have made conditon records for BED, CESS, Edu Cess and VAT. I hve defined the accounts in both excise transactions and VKOA Settings even then the accounting document is not getting created. I am getting the following error.
No account is specified in item 0000001003
Message no. F5670
Help to solve the above
Thanks in Advance

Open the document in VF02 / VF03, go to Environment -> Acct. Determination Analysis -> Revenue Accounts. (You can also press CtrlShiftF12). There check for the item no. 1003. You'll find no account has been determined for this item through any procedure.
In the right pane, it will also give other details like CoA, Sales Org etc (as per your access sequence) which it tried to find the account for. Assign an account for that combination in VKOA and then try to release the doc for accounting. It should work if you have assigned correctly.
Ravi.

Accounting document not created for PGI

Dear All,
I have done PGI for Delivery document.
The movement type is 601 and Special Stock indicator is E (Order 0n Hand).
While PGI material document has been created but accounting document has not created.
Waiting for your valuable suggestion
Thanks & Regards,
Ratish

Accounting / Materil Document in PGI:
These settings are pre configured by the SAP, Accounting document is generated based on the following combination-
Valuation Class in the Material Master + Account Modifier + Transaction Event = GL Account
These account modifier is assigned to Movement type settings in Transaction OBYC of Accounting and these Account modifier is determined based on the Movement type availabe in Delivery.
Material Document is generated based on the number range assigned on the combination of Documen type(WL) + Transaction code.

Material document not created for scrap

Hi all,
I am doing confirmation and goods movement through Co11. When i enter more yield than planned and some scrap the goods movement are posted ,but there is no material document accounting for the scrap. Also after the final confirmation the order status is still PCNF. Please give your suggestions.
Looks like I am missing some configuration,do let me know.
Thank you all.

1. The scarp qty that you enter here will not generate the material document.
Reason:
The scrap enter here proportiantely increases the consumption of the components but will not produce any FG or Byproduct for the materail.
2. When should we use this .
For scenarios like : If you are wokring in chemical industry when youproduct 10 litres of paint .25 litres of the material gets scrapped as residue and you just mix it to your sewage line : Here the FG paint whichere gets scraped is not accountedd as separate mateiral but we need to consume the component
in such scenarios only the scrap should be entered in the co11
3. Also if you need to catch the activity cost then this will be used
thanks and regards
i am also intresed to get different answer

Multiple Posting change notice created for one material document

Hi All,
The scenario is that the user needs to transfer material from unrestricted to quality stock type. while doing so the storage type is different than the actual storage type for the material. Meaning if the material is normally stored in high rack storage type, when it is found that the material is damaged or expired it need to be moved to the quality storage type. For this the user will first create material document in IM with movement type 322 transferring material from unrestricted stock to qualtiy stock. A PCN will be created in back ground which will in turn be converted manually by the user to a TO. while doing so the user will pick the quant manually from the required storage type and select the destination storage type as the quality or quanranntine area.
The issue here is that system creates one PCN for each material document line item. The requirement is that the system should create only one PCN with multiple lines for one Material document.
The setting in the movememnt type clearly says that it will behave as it is behaving.
Is there any other way or setting by which we can create one PCN with multiple line items for a material document.
Would look forward to your replies.
Regards,
Jeetendra

Thanks and Sorry for the delayed reply. We have now convinced the users that the system behaviour is standard and we cannot change the same.
To your question about the need to have one PCN with multiple lines please note that the setup is such that when material document is created for transferring material from unrestricted to quality and vice versa this document is created with multiple materials in one go. Now when the PCN is to be converted to TO then the user ends up in creating number of TO's equal to the number of lines in the Material Document. We wanted to avoid this and hence this was posted in SDN.

Physical inventory document created for Cycle counting

There are lot of physical inventory documents are created for materials around 2500 automaticallly
I have checked all MMR for materials, all these material set with cycle counting indicator 3 which mean that 25 pdhysical inventories and 10 physical intervels.
I have checked batch input but i did not any found batch input posted for this..
How the physical inventory documents are created automatically for these materilas.
Plz thorugh some light on me..

Hi
There is a process for creating the physical inventory document of your inventory. The lines are separately created for each product batch.
Probably the process will be scheduled and therefore it is executed and created the document.
Regards
Imran

No Documents were created for in this run

Similar Messages

Maybe you are looking for