No Fault When Dynamic Partner Link Is Down?

Hello,
I have an async process that establishes a dynamic partner link based on runtime data. I understand how to fire off to a dynamic partner link, however, I ran into a problem while testing a scenario where the partner link's endpoint is down.
In situations where the dynamic endpoint is up, my process calls it without any problems. However, when testing what happens if the dynamic endpoint is not available, I expected the process to throw a fault that I can catch. What I find is that an exception is raised in the logs (see below), but the calling process does not throw a fault. The process also continues on as if the call were successful?
Is there something that I can do to ensure that faults are raised in cases where dynamic partner links are down?
<2008-06-07 21:42:13,413> <DEBUG> <default.collaxa.cube.ws> <WSIFInvocationHandler::invoke> invoke failed
org.collaxa.thirdparty.apache.wsif.WSIFException: when invoking locally the endpoint 'http://alcalba2-lap:8889/orabpel/default/CDS_DNS_process/1.0', ; nested exception is:
ORABPEL-00000
Exception not handled by the Collaxa Cube system.
An unhandled exception has been thrown in the Collaxa Cube system. The exception reported is: "ORABPEL-02178
Process not found.
The BPEL process "CDS_DNS_process", revision "1.0" has not been loaded. Either the process was not initialized properly or the process has been disabled.
Please consult your administrator regarding this error. The application server logs may provide more information regarding this error.
v10.1.3.3.0
Thanks!

There is a catch all block. I have no fault policies or fault binding set outside of what is defaulted.
Shouldn't my catch all block be enough to pick this up? It's as if nothing is bubbling up to the process and I clearly see an exception in the logs.

Similar Messages

Dynamic partner link in BPEL2.0 in SOA Suite 11.1.1.6.0

Hi experts,
I would like to use the dynamic partner links in BPEL2.0 in SOA Suite 11.1.1.6.0 but I get this error:
<env:Fault xmlns:ns0="http://docs.oasis-open.org/wsbpel/2.0/process/executable">
   <faultcode>ns0:selectionFailure</faultcode>
   <faultstring>fromValue is nota sref:service-ref element</faultstring>As I know the dynamic partner link (in BPEL2.0) was not supported in 11.1.1.5.0 but it is in 11.1.1.6.0. So it should work but unfortunately it doesn't.
Could anyone please help me?
Thanks,
V.
      <assign name="Assign_set_EndpointReference_InventoryConfirmation">
        <copy>
          <from><literal><sref:service-ref xmlns:sref="http://docs.oasisopen.org/wsbpel/2.0/serviceref"
                                           reference-scheme="http://www.w3.org/2005/08/addressing">
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2004/08/addressing">
<Address>http://localhost:8088/mockInventoryConfirmationBinding</Address>
</EndpointReference>
</sref:service-ref></literal></from>
          <to partnerLink="PL_InventoryConfirmation"/>
        </copy>

That link leads to instructions for an async partner link. Is it appropriate for synchronous partner links?
Frankly -- this documentation is really irritating. It makes a lot of assumptions and is far to vague in places. The very first thing it says is "Create a WSDL file that contains multiple services that use the same portType." but it doesn't specify which wsdl (I have several in my project) and seems to be drawn from some example code with no explanation.
I have a wsdl for a partner link that looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<wsdl:definitions
     name="f17borrowerCheck"
     targetNamespace="http://xmlns.oracle.com/f17cPriorCaseCheck/f17borrowerCheck/f17borrowerCheck"
     xmlns:ns1="http://xmlns.oracle.com/A43ICSEF"
     xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype"
     xmlns:client="http://xmlns.oracle.com/f17cPriorCaseCheck/f17borrowerCheck/f17borrowerCheck"
     xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
     xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing">
    <plnk:partnerLinkType name="f17borrowerCheck">
        <plnk:role name="f17borrowerCheckProvider" portType="client:f17borrowerCheck"/>
    </plnk:partnerLinkType>
    <wsdl:types>
        <schema xmlns="http://www.w3.org/2001/XMLSchema" xmlns:plnk="http://docs.oasis-open.org/wsbpel/2.0/plnktype"
             xmlns:client="http://xmlns.oracle.com/f17cPriorCaseCheck/f17borrowerCheck/f17borrowerCheck"
             xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
            <import namespace="http://xmlns.oracle.com/f17cPriorCaseCheck/f17borrowerCheck/f17borrowerCheck"
                 schemaLocation="xsd/f17borrowerCheck.xsd"/>
        </schema>
        <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema">
            <xsd:import namespace="http://xmlns.oracle.com/A43ICSEF" schemaLocation="xsd/a43cisef.xsd"/>
        </xsd:schema>
    </wsdl:types>
    <wsdl:message name="f17borrowerCheckRequestMessage">
        <wsdl:part name="payload" element="client:process"/>
    </wsdl:message>
    <wsdl:message name="f17borrowerCheckResponseMessage">
        <wsdl:part name="payload" element="client:processResponse"/>
    </wsdl:message>
    <wsdl:portType name="f17borrowerCheck">
        <wsdl:operation name="process">
            <wsdl:input message="client:f17borrowerCheckRequestMessage"/>
            <wsdl:output message="client:f17borrowerCheckResponseMessage"/>
        </wsdl:operation>
    </wsdl:portType>
</wsdl:definitions>Edited by: Keith Fosberg on Oct 29, 2012 7:31 AM

Partner Link URL/WSDL or Dynamic Partner link

We are using a service similar to CreditRatingService in orderBooking Tutorial as a partner link.
The partner has different test vs production service.
I was wondering during deplyment on production is it possible to specify the URL in config file or do I have to change the designtime location in jdev and then deploy it in prod.
Can experienced folks here point me to deployment best practices ?
Part2 : Where does dynamic partner link fit in ?

JDeveloper is using ANT and is using a properties file during the compilation. You can change the properties when you want to deploy.
http://orasoa.blogspot.com/2006/08/using-ant-in-bpel-environment.html
Dyn PL are usefully when you want to call multiple/various web services that all take the same payload, but are using different end-points and operation. This reduces the code to make for every interface an PL.

A dynamic partner link for very distinct services.

Hello,
Is possible to create a dynamic partner link for very distinct services. for examples 10 services has different operation names, inputs, outputs.
Thank you.

Hello,
You could use an Oracle Services Registry ( UDDI ) to store the WSDL and dynamically select the needed WSDL.
Here is the general idea :
http://chintanblog.blogspot.com/2008/04/performance-with-esb-and-bpel-run-time.html
Cheers,
Arnaud

Why we use Dynamic Partner Link in BPEL process

hi,
What is the purpose of using Dynamic Partner link in BPEL process ?

Hi Shankari,
apart of using the the config plan you can change the endpoint uri in runtime if you define the property "endpointURI" in your composite
<binding.ws port="http://xmlns.oracle.com/bpel/workflow/taskService#wsdl.endpoint(TaskService/TaskServicePortSAML)"
location="http://localhost:7001/integration/services/TaskService/TaskServicePortSAML?ORAWSDL"
soapVersion="1.1">
<property name="weblogic.wsee.wsat.transaction.flowOption"
type="xs:string" many="false">WSDLDriven</property>
<property name="endpointURI"
type="xs:string" >http://localhost:7001/integration/services/TaskService/TaskServicePort</property>
</binding.ws>
then right click your composite in the enterprise manager and go to "Service/Reference Properties". There you can change the endpointURI property.
You can also change the endpointURI inside your BPEL process. Go to the invoke inside the bpel process and go to the "properties" tab. There search for the property "endpointURI" and set a value.
hope this helps
cheers Nicolas

Dynamic partner link for http binding

Hi all,
I'm writing BPEL code to call a web service with dynamic partner link.
I'm succesful in soap binding but fail in http binding, it does not run with new given address.
Could you please help me to solve this problem? Is the trouble coming from http binding?
This is the successful part:
- BPEL code:
<assign name="assign-Address">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing">
<Address>http://152.78.239.173/FusionWPS/Fusionservice.asmx</Address>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
<copy>
<from variable="partnerReference"></from>
<to partnerLink="WPS_Provider"></to>
</copy>
</assign>
<invoke name="invoke-1" partnerLink="WPS_Provider" portType="nsxml0:FusionServiceSoap" operation="getCapabilities" inputVariable="getCapRequest" outputVariable="getCapResponse"/>
- Binding and service:
<wsdl:binding name="FusionServiceSoap" type="tns:FusionServiceSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
<wsdl:operation name="getCapabilities">
<soap:operation soapAction="http://www.opengis.net/wps/getCapabilities" style="document" />
<wsdl:input>
<soap:body use="literal" />
</wsdl:input>
<wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="FusionService">
<wsdl:port name="FusionServiceSoap" binding="tns:FusionServiceSoap">
<soap:address location="http://1acb152.78.239.173/FusionWPS/Fusionservice1.asmx" />
</wsdl:port>
</wsdl:service>
This is the unsuccessful part:
- BPEL code:
<assign name="assign-Address">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing">
<Address>http://153.96.8.132:80/52N-SOSv2-01-00/sos</Address>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
<copy>
<from variable="partnerReference"></from>
<to partnerLink="SOSProvider"></to>
</copy>
</assign>
<invoke name="invoke-1" partnerLink="SOSProvider" portType="nsxml0:SOS" operation="GetObservation" inputVariable="getObservationREQ" outputVariable="getObservationRES"/>
- Binding and service:
<binding name="SOSBinding" type="tns:SOS">
<operation name="GetObservation">
<http:operation location=""/>
<input>
<mime:mimeXml part="parameters"/>
<mime:content type="text/xml"/>
</input>
<output>
<mime:mimeXml part="parameters"/>
<mime:content type="text/xml"/>
</output>
</operation>
</binding>
<service name="SOS">
<port name="SOS" binding="tns:SOSBinding">
<http:address location="http://153.96.8.132:80/52N-SOSv2-01-00/sos1"/>
</port>
</service>
Thanks for your help.
An Le

Dear all,
Thanks for your pay attention on my question.
I'm sorry, I have just taken my vacation, so I couldn't check your reply.
c|3k: If the server is not available, it must be throw an error message. But in my case, it took the old address to run and give me a unexpected result.
sashwat: I copied service name before, but it didn't work.
But let me try again.
Thank you all very much.
An Le

Need Help Regarding Dynamic Partner Link

Hi all
I am new to this Oracle BPEL.
I need to configure dynamic partner link.
need help with this.........
any useful links.. pls.

Hi',
Check this
http://blogs.oracle.com/dasoa/entry/11g_dynamic_partnerlink_example
there are plenty like this.
-Yatan

Exchange 2013 Split DNS, how to get WAN clients to use public Split DNS IP when inter-office link is DOWN?!

Hello,
I have an Exchange 2013 deployment and a LAN/WAN setup, we have many small remote WAN linked offices that can resolve to the Exchange Server's internal IP.
Outlook clients in remote WAN offices work fine as long as the link is UP since the Split Brain DNS for Exchange will resolve the internal clients to the internal IP of the Exchange server, Outlook connects up without issues.
However, in the event of loosing connection to our remote sites, they will no longer be able to resolve to the internal Exchange IP, but they still have a backup public internet that they can use. So should the inter-office connectivity fail we have it setup
so clients in remote offices can still browse the internet, etc.
However, their Outlook fails to connect because it has a cached DNS record for our Split Brain Exchange DNS setup and tries to resolve it to its internal IP, instead of refreshing the cache and grabbing the public IP of the Exchange server since now they
would be resolving it over the public internet.
Is there anything I can do with my existing configuration to allow the client to pick up the public IP of the Split DNS setup when our inter-office connection is down and the client is no longer able to use the internal IP they have cached for Exchange?
I guess I could lower the TTL on the DNS record to something like 1 minute so it does not cache the DNS record / IP for long? Is this the best approach?

http://public.wsu.edu/~brians/errors/lose.html
I would suggest that the best approach is to either improve the reliability of the WAN link or to configure DNS to always use the Internet path. You might want to work with your network guy, perhaps there's a way to have your gateways automatically
switch to an Internet VPN backup when the WAN link is down or something like that.
Ed Crowley MVP "There are seldom good technological solutions to behavioral problems."

Dynamic Partner Link.

Hi,
does anybody have an idea how to create a dynamic partner link.My requirement is that I recieve the service URL from database and then need to create a partner link to send message to that external service on that URL obtained.
Anybody have any info on that .Please let me know.
Thanks
Deepthi.

I haven't build this yet, so just some wild guesses.
<variable name="partnerReference" element="wsa:EndpointReference"/>
<assign>
<copy>
<from>
   <EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing">
   <Address>http://localhost:9700/orabpel/default/UnitedLoan</Address>
   <ServiceName
     xmlns:ns1="http://services.otn.com">ns1:UnitedLoan</ServiceName>
   </EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
</assign>If i see this peace of code, you should be able to assign the address of the service.
This value you will receive from the database service.
This partnerReference variable you will use for the invoke of the partnerlink

Strange problems with Dynamic Partner Linking, how to reset conversation Id

Hi,
We have dyanamic partner linking with synchronous BPEL process. For testing this I have created an xml which is having 3 Dyanmic links for the same partener link. When I execute the first one gets executed but second one onwards it throws bpel fault exception When I am looping through the XML the first linking is working but when it tries to do the second call to the same end point it faults out saying
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>GenericError</code>
</part>
<part name="summary">
<summary>null</summary>
</part>
</bindingFault>
I tried several ways, bottom line this what I am getting in Do parter link assing in both loops. In my observation it generates some conversation Id which is null in the first iteration but from second one onwards.. it is generating some value which I am unable to reset. I belive if I can reset that converstationId to null probably I won't get this bepelFault.
Please let me know if you need more information.
First Scenario:
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>null</conversationId>
<properties>{}</properties>
</partnerLink>
Second Scenario:
[2006/04/18 22:37:10] Updated variable "PartnerLink_Campus_PIDS" less
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>bpel://localhost/default/iXPPIDSUpdateBroadCast~1.0/8909-BpInv0-BpSeq1.5-5</conversationId>
<properties>{}</properties>
</partnerLink>
I clearing the end point the following way.
<assign name="ClearEndpoint">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://xmlns.oracle.com/PIDSUpdate_CHCS">
<Address/>
<ReferenceProperties/>
<ServiceName/>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
</assign><!-- set the address in the endpoint variable
Dynamic Links XML :
<Dynamiclinks xmlns="http://ixp.mhs.dod.gov/DynamicLinksSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
</Dynamiclinks>
Does any one how to reset the convesation Id, it will be a big help for me.
Regards,
Sridhar Dabbeeru

Hi,
We have dyanamic partner linking with synchronous BPEL process. For testing this I have created an xml which is having 3 Dyanmic links for the same partener link. When I execute the first one gets executed but second one onwards it throws bpel fault exception When I am looping through the XML the first linking is working but when it tries to do the second call to the same end point it faults out saying
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>GenericError</code>
</part>
<part name="summary">
<summary>null</summary>
</part>
</bindingFault>
I tried several ways, bottom line this what I am getting in Do parter link assing in both loops. In my observation it generates some conversation Id which is null in the first iteration but from second one onwards.. it is generating some value which I am unable to reset. I belive if I can reset that converstationId to null probably I won't get this bepelFault.
Please let me know if you need more information.
First Scenario:
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>null</conversationId>
<properties>{}</properties>
</partnerLink>
Second Scenario:
[2006/04/18 22:37:10] Updated variable "PartnerLink_Campus_PIDS" less
<partnerLink name="PartnerLink_Campus_PIDS" partnerLinkType="{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS">
<myRole name="null">
<ServiceName>null</ServiceName>
<PortType>null</PortType>
<Address>null</Address>
</myRole>
<partnerRole name="PIDSUpdate_CHCSProvider">
<ServiceName>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</ServiceName>
<PortType>{http://xmlns.oracle.com/PIDSUpdate_CHCS}PIDSUpdate_CHCS</PortType>
<Address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS</Address>
</partnerRole>
<conversationId>bpel://localhost/default/iXPPIDSUpdateBroadCast~1.0/8909-BpInv0-BpSeq1.5-5</conversationId>
<properties>{}</properties>
</partnerLink>
I clearing the end point the following way.
<assign name="ClearEndpoint">
<copy>
<from>
<EndpointReference xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns:ns1="http://xmlns.oracle.com/PIDSUpdate_CHCS">
<Address/>
<ReferenceProperties/>
<ServiceName/>
</EndpointReference>
</from>
<to variable="partnerReference"/>
</copy>
</assign><!-- set the address in the endpoint variable
Dynamic Links XML :
<Dynamiclinks xmlns="http://ixp.mhs.dod.gov/DynamicLinksSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
<Dynamiclink>
<address>http://val-ossminc:9700/orabpel/default/PIDSUpdate_CHCS
</address>
<service_name>ns1:PIDSUpdate_CHCS
</service_name>
</Dynamiclink>
</Dynamiclinks>
Does any one how to reset the convesation Id, it will be a big help for me.
Regards,
Sridhar Dabbeeru

Dynamic Partner links in BPEL (or ESB

Can we dynamically define Partner links at runtime and at runtime decide to call these services? If yes, can we also dynamically map the schemas?
BPEL cook book provides an example to for creating Dynamic Partner but this requires redeploying the WSDL?
This is not acceptable because redeploying the WSDLwill effect other processes running.

Just for your information it is recommended when dealing with Batch type processing that the you do not use BPEL variables larger than 5MB.
Therefore is this is the case it might be worth considering a mechanism (as described above) to de batch the process to provide a flow of data rather than a big hit of data.
Hope that Helps
Dave

Getting error: (301)Moved Permanently when invoking partner link

Hello,
I've set up and tested a web service that will execute a command on a host. I then built a BPEL process that invokes this web service as a Partner Link. However, I always received the following error when running the BPEL process:
Invoke_Host (faulted)
[2005/11/04 14:17:57] "{http://schemas.oracle.com/bpel/extension}remoteFault" has been thrown. less
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>HTTP</code>
</part>
<part name="summary">
<summary>when invoking endpointAddress 'http://web398.xxx.com:7780/itas/ws/host', (301)Moved Permanently</summary>
</part>
<part name="detail">
<detail>AxisFault faultCode: {http://xml.apache.org/axis/}HTTP faultSubcode: faultString: (301)Moved Permanently faultActor: faultNode: faultDetail: {}:return code: 301 {http://xml.apache.org/axis/}HttpErrorCode:301</detail>
</part>
</remoteFault>
Has anybody seen this error message? Any suggestions for finding out what's going on here?
Thanks

This is a standard HTTP error code, I am not sure what it means exactly, but maybe a network specialist can make sense of it.
http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
10.3.2 301 Moved Permanently
The requested resource has been assigned a new permanent URI and any future references to this resource SHOULD use one of the returned URIs. Clients with link editing capabilities ought to automatically re-link references to the Request-URI to one or more of the new references returned by the server, where possible. This response is cacheable unless indicated otherwise.
The new permanent URI SHOULD be given by the Location field in the response. Unless the request method was HEAD, the entity of the response SHOULD contain a short hypertext note with a hyperlink to the new URI(s).
If the 301 status code is received in response to a request other than GET or HEAD, the user agent MUST NOT automatically redirect the request unless it can be confirmed by the user, since this might change the conditions under which the request was issued.
Note: When automatically redirecting a POST request after
receiving a 301 status code, some existing HTTP/1.0 user agents
will erroneously change it into a GET request.

Dynamic Partner link in 11g-urgent pls

Version: 11.1.1.3
All,
I've a requirement to use partner link dynamically. I configured a DBAdapter which connects to a DB called 'DB1'. During run time, my payload has systemID based on the systemID I have to insert the doc to a table in appropriate DB. Note that the no.of DB is unknown. There may be 2 or 3 or more than 3 DB's would exist. How do I achieve it in fusion 11g? Any pointers would be grateful.
thanks
sen

Hi,
If you have differenet DB's ...you can pass the JNDI name to the ad adapter dynamically.Luk at the below post
http://shrikworld.blogspot.com/2011/04/change-db-jndi-dynamically-in-soa-11g.html

NUll Pointer Exception while assigning Dynamic Partner Link

Hi
I am currently working with the AIA2.4 Order 2 Bill PIP.
I am facing an issue in 'AssignPartnerlinkEndPointReference' activity in 'SyncCustomerPartyListCommsBRMProvABCSImpl'
It gives a null pointer exception when trying to invoke a BRM webservice.(BRMCUSTService)
The following code is the final step of the assign activity which is used to invoke the BRM webservice.
<EndpointReference><EndpointReference xmlns:wsa="http://schemas.xmlsoap.org/ws/2003/03/addressing" xmlns="http://schemas.xmlsoap.org/ws/2003/03/addressing">
<wsa:Address>eis/BRM</wsa:Address>
<wsa:ServiceName>brm:BRMCUSTService</wsa:ServiceName>
</EndpointReference>
</EndpointReference>
Kindly help me resolve this issue.
Thanks
Nidhi

Hi Nidhi,
Could you please ensure if the BRM JCA Adapter is configured properly If yes and issue persists, please post the relevant error details from opmn log file located at $SOA_HOME/opmn/logs/default~oc4j_soa~xx.log.
Regards
Rohit

WRVS4400N : DHCP not assigning IP addresses if WAN link is down

Hello,
With the latest firmware installed (the one suporting fixed IP based on MAC), I have one problem: the DHCP server is not assigning addresses when the WAN link is down. When it is up, it generally assign IP based on the configuration binding (MAC/IP). But it sometimes fail to do so. Before using the wrvs4400n I had no issues with DHCP wrt54G and other routers.
Any hints ?
Thanks.
V.

Hi there!
Thanks for contacting the business support - other guys got the same problem.
I'm now back on firmware version 1.00.16 and everything works fine.
But the new features were nice to have!

No Fault When Dynamic Partner Link Is Down?

Similar Messages

Maybe you are looking for