No Hyperthreading Function in BIOS menu

Hi!
Recently I bought MSI NEO2-FIS2R motherboard. I have Pentium4 processor 2.4GHZ with hyperthreading. I don't see "Hyper Threading Function" in BIOS so I can't Enable/Disable it. But in Windows XP I can see 2 processors. On the other hand, Linux is not able to use hyperthreading - I can see only 1 processor. Although, in /proc/cpuinfo I can see "ht" flag so processor seems to be OK.
Has anyone run into the same problem? Is it problem with BIOS or something else?
Thanks.

Quote
I found the answer. We need to update our BIOS to 1.7. Intel has a new stepping (old: SL6WF, new:SL6Z3) since August 03 and these CPU's could not be detected correctly with BIOS 1.5
The Sept 2003 Specification Update of the P4 indicates:
S-Spec CoreStepping CPUID SpeedCore/Bus Notes
6L6Z3 M0 0F25 2.4GHz/800MHz See 19,21
6L6Z5 M0 0F25 2.8GHz/800MHz See 19,21
19. These parts have some specifications that differ from those in the Intel Pentium 4 Processor with 512-KB L2 Cache on 0.13 Micron Process Datasheet. The specifications that are different from the datasheet are: Vmax = 1.425 V, Vmin = 1.350 V, Icc_max = 57.9 A, TDP = 75.1 W, Tcase = 72 °C, Isgnt = 32.0 A.
20. These parts have some specifications that differ from those in the Intel® Pentium® 4 Processor with 512-KB L2 Cache on 0.13 Micron Process Datasheet. The specifications that are different from the datasheet are: Vmax = 1.420 V, Vmin = 1.340 V, Icc_max = 60.5 A, TDP = 78.0 W, Tcase = 74 °C, Isgnt = 32.0 A.
21. Pentium 4 processor with 512-KB L2 cache on 0.13 Micron Process M-0 stepping is a unique and independent stepping of Pentium 4 processors.
Try CPU-Z to confirm this. Can you verify if
a. in PC Health Status, is Vcore down to ~ 1.42 V?
b. in Freq/Voltage Control, is the default CPU Vcore down to 1.42 V? What are the available increments?
Now the big question - because of the lower Vcore, does this CPU have lower temps and higher OC potential?

Similar Messages

Dynamically changing the functions in a menu based on the user (in SSHR)

Dear All,
I have a requirement to change the functions in a menu dynamically.
For Ex: An employee is allowed to apply Advance only in the first one month of his/her joining. I created it as an EIT and attached the function, to the menu. Now, i want to remove it automatically from the menu if his/her term in the company crossed one month.
Can any one tell me how to automatically disable it after one month.
Thanks and Regards
Raj
Edited by: SuperStar_Krishna on Jul 5, 2010 12:22 AM

The following code should do it. In this example, MyCellRenderer is the renderer class implementing TableCellRenderer, used for displaying combo box.
TableCellRenderer renderer= new MyCellRenderer();
(JComboBox)renderer.addActionListener(new ActionListener(){
public void actionPerformed(ActionEvent e) {
//Your event handling goes here
});

How to hide some functions in the menu bar of flash paper

Do anyone know how to hide some functions in the menu bar of
flash paper? As I want to show a swf file(converted from pdf) on
the website without printing function. How can I do it?
Also, if possible, can anyone know how to hide all functions
on the menu bar except the logo of flash paper?
Thank you very much, it is very urgent.

Here is an article about how to integrate flashPaper into
Director. It has most of the functions that can be executed on
flashPaper. Maybe it will help?
http://www.adobe.com/devnet/director/articles/flashpaper_in_director.html
and here is all his code
http://www.mediamacros.com/item/item-1006687373/
Note: it is for 1.01, but works with 2.0

How to attach a function to a menu

how to attach the supervisor TAB function to a menu in such a way that user can only query the staff number and do the updates to their supervisors.
pls help

Go to fastpath-> assignment form
Query for an employee record
Go to Help->Diagnostics->Custom Code->Personalize
1.Enter 10 in Seq number
2.Enter a description (e.g. hide tabs in assignment form)
3.Select level as form
4.In the conditions tab, select trigger event as 'WHEN-NEW-FORM-INSTANCE'
5.Processing mode 'Both'
6.If you want to do this only for a specific responsibility, select responsibility in the context level and enter the responsibility name
7.In the actions tab, enter seq as 1 and type as property
8.In the object type, select tab page
9.In the target object select ASSGT_TAB_CANVAS.SAL (or any other tab that you want to hide)
10.Property name as 'Enabled'
11.Click on get value which displays TRUE in the value field. change it to FALSE
12.and click on apply now
If you want to hide more tabs, enter new seq number in the actions tab and repeat the steps from 7 -12
let me know if this helps or if you have any questions..
-Jay

Help Lenovo G530 4446 BIOS Menu!!

Does anyone know what is there in the BIOS menu of this laptop Lenovo G530 4446...
Tell me where is the Onboard graphics - Dedicated video memory if available so i can change it....
Thanks.

If you have the InsydeH2O "BIOS" the option doesn't appears. At least, I saw in mine and it doesn't.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

New Mac PRO - Windows 8 Pro Ensure that the disk's controller is enabled in the computer's bios menu

Hello all,
I got a new Mac Pro 2013, and am trying to install windows 8 using the Boot Camp Utility. It creates a 200GB partition, partitioned in FAT. Having done this on my other computers, I usually hit advanced options and then reformat the partition as NTFS. I then install. When i format, I still get this error:
Windows 8 cannot be installed - ensure that the disk's controller is enabled in the computer's bios menu. I'm not sure how to get past this step. I am trying to boot from the windows 8 CD and run setup after I partition the drive. I have the USB key with the apple setup files on it.
What am I missing?

Apparently installing via an ISO fixed this issue for me.

Qosmio X70-A-K2S - How do I get to the BIOS menu?

Hello!
I have a laptop Qosmio X70-A-K2S.
I want to replace one of the hard drives on the SSD.
How do I get to the BIOS menu?
Recommendations from the user manual (reboot and release F2 for 1 sec.) do not help.
I can not get any BIOS menu or BOOT menu.
But easily fall into the recovery menu by pressing the 0.

>Recommendations from the user manual (reboot and release F2 for 1 sec.) do not help
Sure this is right is Win 8 preinstalled?
Probably this is the reason why you cannot access the BIOS.
The Windows 8 does not shut down the notebook by default but it perform hybrid shut down.
This allows to boot the notebook much faster but as I said, it prevents accessing the BIOS.
Take a look here how to perform shut down on Windows 8 preinstalled notebook:
[Perform a complete shutdown in Windows 8|http://aps2.toshiba-tro.de/kb0/TSB2B03EY0002R01.htm]
Greets

How to auto create Report Search functions and Breadcrumb Menu on new pages

Hi
First off I want to say I have just started using Html DB, and think its a great product! I have been using it for a few months now to create an application, and find it flexible, powerful, but still fairly simple to use.
When I create a new Application using "Based on Existing Tables", the pages that get created have some very nice Report Search functions and Breadcrumb Menu features generated automatically.
I want to do the same when I add pages to an existing application. That is, I want new pages to automatically include those Report Search functions and Breadcrumb Menu features.
I have tried various combinations of the existing wizards, but I have not been able to find any that generate all those features automatically. I know I can create pages using the page wizard, and then manually add the Report Search and Breadcrumb Menu. But that is very tedious. Nor can I find a better answer in the forum
Any suggestions or ideas?
Thanks
Richard

Can you show the scripts and reports screenshort, so we can have a clerarl idea.
madni

Query functionality in custom menu

Hi,
I have created my custom menu and attached to my form. when i compiled iam not able to see some standard functions like Query functionality. Is there any process to achieve query functionality in custom menu attached to form

You want to have something like an "Execute Query" in your menu. Add a menuitem of type PL/SQL and put the code
DO_KEY('EXECUTE_QUERY');Same procedure would be for other "query-menu"-items

P67A-GD65 bios 1.E mouse only moves vertically in bios menu

I have a Microsoft wireless explorer mouse
I updated my bios to v.1E
Now the mouse only moves vertically in bios menu
Does anybody has this problem to?
Ty Alex

Quote from: alexjakarta on 22-July-11, 21:58:34
I have a Microsoft wireless explorer mouse
I updated my bios to v.1E
Now the mouse only moves vertically in bios menu
Does anybody has this problem to?
Ty Alex
Yes, was also a problem in v1.D. MSI are aware... You can still navigate the BIOS using the keyboard.

H67MA-E45 BIOS menu freezes

Intel i3 2100T
MSI H67MA-E45 (B3)
Silverstone 500W SST-ST50F-P
Kingstone Dual channel 1333MHz 4GB (2x2GB) Dual Channel KVR1333D3N9K2/4G
Since day one of firing up my new build, the BIOS freezes while in any BIOS setup menu after about half a minute or so.
POST and bootup both go by without either issue or delay and I can still change BIOS settings if I'm fast enough.
The strange thing is, memtest86+ shows no errors and Windows is perfectly stable as far as I can tell, though I haven't put it under heavy load yet.
I've successfully tried flashing (via forum tool, after memtest) to the most recent BIOS version with no luck in fixing this issue.
Any ideas or things I might have overlooked?
EDIT: Eh, wrong section? Sorry if it is, was half asleep when I posted (and still am).

BIOS menu is no longer freezing. I think I stumbled onto the fix by coincidence.
New keyboard/trackball (IOGEAR GKM561R) came in the mail, so I installed it and removed the temporary keyboard and mouse I was using originally.
A little while later I went into BIOS and found that it didn't freeze anymore. Thinking it was an issue with the USB keyboard or mouse I previously used,
I tried entering BIOS with just the previous keyboard. It was stable, but once I tried again with both the keyboard and the mouse the problem returned.
I'm thinking the mouse (steelseries KINZU) or a combination of the keyboard (Razer BlackWidow) and the mouse was the cause.
Also, just finished putting the system under heavy load with no stability issues. Looks like I'm in the clear. Thank you guys for lending me a hand, though. I really appreciate it.
EDIT: Bernhard, I didn't see your post until after I posted this, but it seems you were right on the money about the keyboard/mouse.

Msi 970a g46 stuck inside bios menu.

I got my 970a g46 just a few days back. I can boot into windows, everything in windows works fine. But when I enter the bios menu and click on anything it just freezes up. The mouse does not move, keyboard does not respond etc. I have tried changing the ram, hdd etc. Can someone please tell me whats wrong. I have not updated the bios or anything.
I Overclocked only my CPU, but its absolutely stable when I get into windows, passes prime blend, can play BF3 whole day etc
I can go into the bios and everything seems fine but as soon as I click on anything it just freezes up, I cant change any settings.
My specs are:
AMD phenom II x2 560 OCed to 3.8 ghz, (224 x17)
Corsair vengeance DDR3 4gb 1600mhz
Nvidia GTS 250
Seagate 500GB HDD
Cooler Master 600watt PSU

Clear CMOS and retry: >>Clear CMOS Guide<<

6730 (655 Max-FISR) RAID BIOS menu - how to enter?

Hey all,
according to http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=424, this model (6730) should have RAID 0 or 1 support.
But I can't quite figure out anything in the BIOS menu of it that has to do with this. So I installed two Serial ATA hdds onto my motherboard, and they are being detected just fine, no problem at all. So according to the Serial ATA menu, I start installing win2000 and do the F6 and S stuff, loading the drivers for the SATA drives. Then when I get to where it asks me where to install windows too, I get TWO harddrives listed for me to choose from, not one (I'm trying to do RAID 0 btw).
Well coming to think about it, that's logical: I did not set ANYTHING in the BIOS about the drives being in RAID -- I read some guides online on how to install RAID drives -- supposedly you press Ctrl-F to enter the BIOS for RAID controller and set RAID0, RAID1 and those stuff there. Where is this RAID BIOS menu for the MS-6730 motherboard?
most threads I read here, when people talk about doing RAID, most people get through the step "configure the hdds as RAID 0/1" really quickly by a mention with a sentence -- I think that's the part I'm stuck on. Maybe my question should be... how do I enter the RAID BIOS for this motherboard at all? The manuals that came with the mobo don't really have anything on RAID *at all*...
[edit]
btw... I'm new to RAID arrays, so I'm not sure if I'm doing this right. I put my two (identical) hdds one connected to ser1 and one connected to ser2, on the motherboard. is that how you are supposed to do it? they are WD Caviar SATA drives (120gb) btw. jumpers shouldn't be a problem, the WD web site says for a SATA drive, the jumpers are only for power settings, no master/slave things.
Thanks for any help.

http://wdc.custhelp.com/cgi-bin/wdc.cfg/php/enduser/std_adp.php?p_sid=CxTASuHg&p_lva=&p_faqid=958&p_created=1050530240&%20p_sp=cF9zcmNoPTEmcF9ncmlkc29ydD0mcF9yb3dfY250PTImcF9zZWFyY2hfdGV4dD1qdW1wZXImcF9zZWFyY2hfdHlwZT00JnB
fcHJvZF9sdmwxPTk1JnBfcHJvZF9sdmwyPX5hbn l_JnBfY2F0X2x2bDE9fmFueX4mcF9zb3J0X2J5P WRmbHQmcF9wYWdlPTE*&p_li=
well assuming you have connected the sata lead and a power connector all i can think is your psu is very poor on the 12v line,how many amps does it give
you might try the jumper bit in the link as well
you will have to paste the full link in

Missing IPCA function in BIOS

I've been having some issues with standby on my new pc. I checked the power management portion of the BIOS, and I don't have a IPCA funtion to enable or disable. the menu starts at Sleep State. Also, I experience some weird crashes when running games or heavy Winamp visuals. Locks up as soon as it loads.
my bios version (according to Live Update) is 5.10
any help appreciated,
Imac,
K7N2-L
Athlon 2500 XP barton
2 X 256megs Apacer 2700
ATI Rage Fury Pro 32 meg (yes it's dated, but i'm broke)
Sound Blaster Live Value
WD 40G HD + 8.4G Quantum HD
Windows ME
350 Watt power supply

After thinking about this I'm sure they left it out because they didn't have enuff room to put it in the BIOS. They are limited to how much code they can put in the BIOS still...you'd think that after all of this time they'd have as much room as they need to write more code into the CMOS chip but alas they've slacked on that in the industry it seems...
Being that you can control these functions thru Win2K and XP I don't think they're really addressing/supporting any OS's lesser than those these days...I can't say I blame them really...they were such unstable OS's that they figured that most ppl would have upgraded by now...they're right in that most ppl have but there are a choice few out there that haven't for various reasons...
They're after the business of the majority these days and as is the norm in this business they leave everyone else behind...I'm not saying this is correct, just the reality...
Take care,
Bonz

USB Keyboard/Mouse do not function in Bios (Bios Change log too)

I have 1.7 and the system seems fairly stable, a few BSOD's occasionally and it normally seems to occur when the system is idle. I can work on that, but now when I boot my usb keyboard will not function for the EFI/Bios. I have a Old PS2 keyboard working for now but was hoping there is some work around that someone might now. Everything is enabled in the Bios and I even disabled, saved, re- enabled, saved.
Saving (F10) still causes the system to power down, but I can live with that.
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
Lastly I am used to new hardware having issues especially with OCing, but the EFI/BIOS seems extremely temperamental. First MSI board and my work is on the road a lot so I am hoping to get some of this fixed soon.
Thanks for any advice

Quote
a few BSOD's
What are the Stop: error codes? 124? 050?
Quote
Now for the BIOS, can we get a change log to determine what issues are being resolved with these update? I have 1.8b7 downloaded but last update I lost my Raid array so I want to see change logs before a possible rebuild.
https://forum-en.msi.com/index.php?topic=144655.0

No Hyperthreading Function in BIOS menu

Similar Messages

Maybe you are looking for