No INBOX Selection for the Partner

Hi Experts,
Could someone please tell me where we can configure a Vendor for "No INBOX Selection for the Partner".
Is this at some transaction level or in the Shopping cart.
We have this field in the table CRMD_PARTNER,  Field - DISABLED
Due to this the Vendor gets dropped and the PO goes into HELD status.
We have implemented the Preferred to FIxed Vendor and works perfectly, except for these partners with CRMD_PARTNER-DISABLED = 'X'.
Thank you.

thanks

Similar Messages

  • Error "No INBOX Selection for the Partner".

    Hi Experts,
    Could someone please tell me where we can configure a Vendor for "No INBOX Selection for the Partner".
    Is this at some transaction level or in the Shopping cart.
    We have this field in the table CRMD_PARTNER, Field - DISABLED
    Due to this the Vendor gets dropped and the PO goes into HELD status.
    We have implemented the Preferred to FIxed Vendor and works perfectly, except for these partners with CRMD_PARTNER-DISABLED = 'X'.
    Thank you.

    thanks

  • AFS ARun: sales order not been selected for the allocation run.

    Hi,
    I am setting up the Purchase-to-Order (similar to Indiv PO item sales order) Process for SAP AFS.
    When doing the Allocation Run (trx J3AT) after Goods receipt of Sales order stock, I get an error that ARun terminated because no requirements were selected. The delivery check report (/AFS/LIEF_CHECK) indicates that the sales order has not been selected for the allocation run.
    For this process, I have set-up an Allocation type with
    1.     Requirement selection that does not exclude MTO/PTO orders
    2.     Set-up stock selection which includes physical stock type for MTO/PTO orders to the customer special stock MSKA with the segment KALAB.
    Can someone suggest what I may have missed?
    Regards,
    PD

    Hi Pankaj, I have same exact issue. How did you fix this ?
    Thanks,
    Mahesh

  • How can I reduce the selection for the characteristics value in a BW query

    Good morning,
    I need to find out how I can reduce the selection for the characteristics values in a BW query.
    In a BW query I have a characteristic "Due month".
    The characteristic values shown in the query are from 01.2001->03.2007. I would like to reduce it to the last 2 years,in the query view,  without deleting the data for the other years in the cube.
    Do you know how this can be done?
    Thank you in advance for your feedback.
    Kind regards,
    Linda Verding
    Staff Consultant - CSC

    hi,
    First thing you have to do is check the report how the data is being restricted only to those months.
    1) one it can be variable in which the code is written for that to populate for last few years.
    or else it must have been hardcoded for these months.
    Go into your report and underneath the characteristicsCALMONTH there must be an variable or hardcoding.
    You need to change this here in the report.
    You dont have to delete anything there.
    Regards, Siva

  • I have just upgraded to Mountain Lion and my signatures for my Mail is not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice

    I have just upgraded to Mountain Lion and my signatures for my Mail are not showing up. I have the signatures inthe preference panes and selected for the email address, but when I make a new message, the signature shows as none and doesn't give me a choice. Yesterday, the signatures were stacking instead of switching to the one I wanted to choose.

    I had this and fixed it.
    I had upgraded to Mountain Lion and my signatures in Mail were fine. But then about a week later, I got a new computer and used Migration Assistant to copy my stuff to the new machine. Upon opening Mail, I had all the correct Signature information in the Preferences>Signatures window, but nothing worked.
    After lots of hunting, I found the Signature Folder. It's in:
    Yourusername>Library>Mail>V2>MailData>Signatures
    Looking at my previous setup (which works) I saw in that folder two types of files: .webarchive and .siganture
    Looking in my new machine's Signature folder, I saw only the .webarchive folders, not the .signature folders
    Since this was literally a clone of my previous setup to a new machine, here's what I did:
    1. Quit Mail
    2. In Problem machine, go to
    Yourusername>Library>Mail>V2>MailData>Signatures
    3. Move the Signatures folder someplace safe, but out of the MailData folder
    4. Get the Signatures Folder from the working install (like a backup) and copy it to the MailData folder on the problematic machine
    5. Start Mail on the problem machine
    This worked for me. I don't know why Migration Assistant didn't copy the full signature folder, but this fixed it. It worked perfectly partly because I had just backed up with Carbon Copy Cloner and the very next day set up the new machine. I don't know where Lion or earlier versions of mail stored signatures, but the absence of the .signature filetype seems to be the problem.
    Hope this helps

  • How do I change the image selected for the finalized movies pane in all events?

    How do I change the image selected for the finalized movies pane in all events? I made a movie some time ago in iMovie, and a still from this now appears as the image for Finalized Movies in the All Events pane (as well as showing up if I then click on this pane to take me to Finalized Movies). Anyone know how to change or delete this image, please?

    Unfortunately, the suggested solution in that thread does not work and the thread appears to be closed to replies.  That is, even though I am logged in the Reply|Quote|Mark as answer|Report as abuse items are missing.
    The suggested solution is:
    First, I found I had "img100.png" in  C:\Windows\Web\Screen  and
    C:\Windows\WinSxS\x86_microsoft-windows-themeui-client_31bf3856ad364e35_6.2.9200.16384_none_69ee3fa2269e545e
    1. Belonging to the Administrators Group, I replaced file Owner TrustedInstaller with my Username on both "img100.png" files
    2. After resizing the image I wanted to see on the Login screen to the resolution of "img100.png" file,
    I copied and pasted it to both "img100.png" files keeping this way the format (extension) and resolution of the original "img100.png" file,
    which I permanently deleted.
    However, I have not been able to replace the img100.pgn in C:\Windows\Web\Screen even after taking ownership of it and setting the permissions for my userid to All.  I edit it with mspaint and then try to save it. The save starts that then says the
    save was interrupted.
    The appears to be some additional protection besides the standard acls.
    http://www.saberman.com

  • Dynamic selections for the FBL5N report

    Hi Experts,
    Can any body help how to add the account assignment group field in dynamic selections for the FBL5N report.
    rgds / Srini

    Hi Alex,
    Thanks for your quick response, here for the report FBL5N the logical database is DDF and the field which should be add in dynamic selection is (KTGRD) account assignment group is available in KNVV table but this table is not available in DDF logival database.
    Please suggest us how we can pickup this field into the report FBL5N for dynamic selections.
    regards / Srini

  • Report Painter - cannot hide an element selected for the drill-down report

    Dear Experts
    I am using report painter to modify a report by trying to hide a row but getting the following error.
    You cannot hide an element that you selected for the drill-down list
    Message no. K7186
    Diagnosis
    You cannot hide elements that have already been selected for the drill-d
    System Response
    The function was canceled.
    Procedure
    Deselect the relevant row or column from the drill-down list.
    It says to deselect the relevant row from the drill-down list, but not able to find out how do i do it.
    kindly please help me to solve it
    thanks in advance
    Suresh

    Hi,
    If you are asking me whether i am trying to hide the row in the report painter form or in the output of the report, then, yes i am trying it in the report painter.
    I copied this standard form  '0SAPRATIO-01' for Cash Flow statements-Indirect method(tcode FSI5) and trying to modify the copied one. I tried to hide an existing row but it gave me the above message.
    any help?
    Suresh
    Edited by: rasuresh on Aug 10, 2010 12:44 PM

  • From where can I select for the apps store according to my own country?

    From where can I select for the apps store according to my own country? I am from Malaysia, just now the message pop out and ask me want to switch to USA store and I choose ok!

    The Complete Guide to Using the iTunes Store | iLounge Article
    "Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location."
    You can change the country / region on your iPod > iOS: Changing the signed-in iTunes Store Apple ID account

  • You can creat any open item , you are remember not selecting for the open i

    you can creat for any openitem, you are not selecting for the open item in FS00,, your already posting for the entries at the end of the month, you can select for openitem is it possible

    Hi,
    No.
    Aravind Boddupalli

  • Dynamic Data selection for the Filed entered in Selection Screen.

    Hi All,
    My requirement is as follows.
    1 select options in Selection Screen for MATNR (SO_MATNR)
    1 parameter field in Selection Screen for entering a MARC field name. (P_FIELD)
    Now the Program has to display the values of this Field (Entered by the user as P_FIELD) from MARC table, where MATNR is in SO_MATNR.
    I understand that this would require a dynamic select statemant but could not figure out the correct way.
    Please help me with the code for this requirement
    Regards,
    Sunil

    Not sure If I understand correct, but here's an example on what I think you are looking for. I don't have an ECC system here (we're on CRM), but you should adept it to your tables and fieldname.
    TABLES: but000.
    DATA: lt_feld TYPE TABLE OF name_feld,
          lw_feld LIKE LINE OF lt_feld.
    SELECT-OPTIONS: so_part FOR but000-partner.
    PARAMETERS: field TYPE name_feld DEFAULT 'MC_NAME1'.
    SELECT (field) FROM but000
      INTO TABLE lt_feld
      WHERE partner IN so_part.
    LOOP AT lt_feld INTO lw_feld.
      WRITE:/1 lw_feld.
    ENDLOOP.

  • Access sequence for the partner is optional?

    Hello Experts,
    Is the access sequence for determining the partners is optional? What if no access sequence is mentioned in the partner determination procedure for any of the partner functions? Is there any other way of determining the partners exists other than access sequence?
    Could you please clarify?
    Thanks in advance!
    Regards,
    Swathi

    No, you must use access sequence. The only other way would be that you write your own function in which you prefill partners and trigger this function with event or if you write the same logic in on of the suitable badies.

  • Dynamic Selections for the F.42 report

    Hii Experts,
    I want to add a field called Business Place(BUPLA) in dynamic Selection in tcode F.42.
    So, in F.42 KDF Logical Database is used, so i make a Custom Selection view for KDF database.
    Business place is successfully added in Dynamic Selection, but it doesn`t reflect when i execute F.42.
    When i test from SE36, it reflects.
    Nitin Garg

    Note 50370 explains in full detail how the system works for selecting the documents with dynamic selection.
    Balance report reads the transaction figures which are stored with the help of several different fields, so the selection according to further fields cannot be proceed. This is standard design.
    The dynamic selection for Document Data does not work for reports which use customer / vendor transaction tables (KNC1 LFC1),i.e., document data like doc.number and Doc.date is not stored in transaction tables.
    Dynamic selections can only be used with customer / vendor, company code
    or fiscal year fields.  The following reports are affected by this
    program design.
    S_ALR_87012186 - Customer sales
    S_ALR_87012082 - Vendor Balances in Local Currency
    S_ALR_87012093 - Vendor Business
    S_ALR_87012079 - Transaction Figures: Account Balance
    S_ALR_87012080 - Transaction Figures: Special Sales
    S_ALR_87012081 - Transaction Figures: Sales
    S_ALR_87012105 - List of Down Payments open at Key Date - Vendors
    S_ALR_87012172 - Customer balances in local currency
    RFKSLD00       - F.42
    RFDSLD00       - F.23
    Hope this clarifies.
    Kind Regards
    Soumya

  • Filter value selection for the query execution

    Dear experts!
    I am working with an input ready query (which is over an aggregation level), and we need to display in the selection variable screen the values for a charateristic from the InfroProvider, not from the Master Data.  I don't mind how to do this, but I need to do it and for the moment it seems impossible.  I've read note 984229 and in there it says that:
    <i>'Only Values in InfoProvider'
    In this case, only values of characteristics that are posted in the InfoCube dimensions or in the DataStore are used for the input value request. This D-mode is valid for InfoCubes or the DataStore as an InfoProvider and for MultiProviders that have only InfoCubes and/or a DataStore as part providers. An exception to this is characteristics that are modeled as a Line Item Dimension. D-mode is not supported for this.</i>
    I am over an aggregation level, and thus SAP says it is not possible with the F4, but I don't mind if I have to code whatever, but I need someway to do this.......
    I need whatever type of solution......I am open to any kind of help you can provide me...... =) please!!!!
    Points will be given to helpful answers
    Thanks and kind regards.
    Cecilia

    Could you please check as per Note 1565809 and make sure the F4 mode is really M mode in each level settings?

  • Drop down in the selection for the field from the table

    Hi.
    i want to put the drop down for the field from the table fo which i dont know the number of entries for the field zregion1 of the table zbwcntry.
    please tell me how to use the function module and what could be the line of codes.
    the drop down is for the select option on the slection screen of the classical report.
    please help .

    HI,
    Check below code..it may help you.
    REPORT Zbunu .
    TYPES :BEGIN OF STR ,
           MATNR TYPE MATNR ,
           END OF STR .
    DATA : ITAB TYPE TABLE OF STR WITH HEADER LINE,
           VAR TYPE MARA-MATNR .
    PARAMETERS : S_MATNR TYPE MATNR ,
                  P_MATNR TYPE MATNR.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_MATNR .
    SELECT MATNR FROM MARA INTO
    CORRESPONDING FIELDS OF TABLE ITAB UP TO 1000 ROWS.
    CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
      EXPORTING
      DDIC_STRUCTURE         = ' '
        retfield               = 'MATNR'
      PVALKEY                = ' '
       DYNPPROG               = SY-CPROG
       DYNPNR                 = SY-DYNNR
       DYNPROFIELD            = 'S_MATNR'
      STEPL                  = 0
      WINDOW_TITLE           =
      VALUE                  = ' '
       VALUE_ORG              = 'S'
      MULTIPLE_CHOICE        = ' '
      DISPLAY                = 'X'
      CALLBACK_PROGRAM       = ' '
      CALLBACK_FORM          = ' '
      tables
        value_tab              = ITAB
      FIELD_TAB              =
      RETURN_TAB             =
      DYNPFLD_MAPPING        =
    EXCEPTIONS
       PARAMETER_ERROR        = 1
       NO_VALUES_FOUND        = 2
       OTHERS                 = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    Regards
    Ansumesh

Maybe you are looking for