No layout available

Hello!
On press to F4 Button in my selection screen there
are no layouts existing although I have saved some of them by the ALV output.
What is wrong at the following scenario.
Regards
ertas
SELECTION-SCREEN SKIP.
PARAMETERS: pa_lv TYPE disvariant-variant.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_lv.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
    EXPORTING
      is_variant                = wa_variant
*     I_TABNAME_HEADER          =
*     I_TABNAME_ITEM            =
*     IT_DEFAULT_FIELDCAT       =
*     I_SAVE                    = ' '
*     I_DISPLAY_VIA_GRID        = ' '
*   IMPORTING
*     E_EXIT                    =
*     ES_VARIANT                =
*   EXCEPTIONS
*     NOT_FOUND                 = 1
*     PROGRAM_ERROR             = 2
*     OTHERS                    = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
wa_variant-report = sy-cprog.
IF NOT pa_lv IS INITIAL.
    wa_variant-variant = pa_lv.
    save = 'A'.
ENDIF.
CALL METHOD gr_alv->set_table_for_first_display
       EXPORTING
         i_structure_name              = 'ZITAB
         is_variant                    = wa_variant
         i_save                        = save
         i_default                     = 'X'
         is_layout                     = wa_layout
      CHANGING
        it_outtab                     = it_li
        it_fieldcatalog               = it_fcat
       EXCEPTIONS
         OTHERS                        = 4

Hi, you can see this codes perrhaps he will be helpful :
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
       EXPORTING
            is_variant = w_g_variant
            i_save     = w_g_save
       IMPORTING
            e_exit     = w_g_exit
            es_variant = w_gx_variant
       EXCEPTIONS
            not_found = 2.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
       EXPORTING
            i_save     = w_g_save
       CHANGING
            cs_variant = w_gx_variant
       EXCEPTIONS
            not_found = 2.
    CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
         EXPORTING
              i_save     = w_g_save
         CHANGING
              cs_variant = w_gx_variant.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program     = w_g_repid
            is_layout              = t_layout
            it_fieldcat            = t_fieldcat
            i_default              = 'X'
            i_save                 = w_g_save
            is_variant             = w_g_variant
            it_events              = t_events
       IMPORTING
            es_exit_caused_by_user = t_exit
       TABLES
            t_outtab               = t_edition
       EXCEPTIONS
            program_error          = 1
            OTHERS                 = 2.
reward if it helpful, or if you have a question.
rergards.
Mustapha

Similar Messages

GL Upload Planning Layout - Available characteristic (WBS element)

Hi All,
In the GL upload planning layout, does anyone have any idea why there is no WBS element in the section of the available characteristic?
I am trying to create a planning layout for GL upload, and I would like the initial screen at the Tcode: GP12N - Enter (New) has selection criteria for user to put in as follows:
Company code:
Version:
Fiscal year:
Profit center: (in range, if possible)
cost center: (in range, if possible)
WBS element: (in range, if possible)
Kindly advise accordingly.
Thanks.
sbmel

Hi all,
I found out that the GL planning upload does post to table: FAGLFLEXP; and this table does not have any fields for WBS as well as internal order.
Does anyone have any idea on this why FAGLFLEXP (or FAGLFLEXA) does not have these fields?
Is it because this 2 objects are just temporary cost capture object, and therefore should not exist in these 2 tables.
Kindly advise.
Thanks and regards,
sbmel

Is there any common layout available in Universal?

I am searching for a common layout by which I can position my design that automatically position based on WP devices or surface.

Hi,
You can refer some good articles around it.
Shared XAML Layouts for Windows Universal Apps
Strategies for sharing XAML code in Universal Apps (1/2)
Strategies for sharing XAML code in Universal Apps (2/2)
Generally you'll want a different layout for a large screen than for a small screen. You can do this by providing different Xaml or by using visual states to move things around.
Simple layouts can be shared using typical adaptive controls such as Hubs, ListViews, Grids, etc.
Rachit
Please mark as answer or vote as helpful if my reply does

Acrobat X Pro Missing Grid with File Preview Layout for Portfolios

In Acrobat 9 Pro, there was a Portfolio layout called Grid with File Preview. We use it as our primary layout for PDF portfolios because it allows users to rapidly view PDFs within a portfolio. This was our primary reason for using Portfolios. Unfortunately, this important feature was removed in Acrobat X Pro resulting in clunky and very slow PDF viewing.
Adobe needs to immediately reinstate Grid with File Preview into Acrobat X Pro. Until this happens, I will continue to use Acrobat 9 Pro.
I encourage everyone to use the Feature Request/Bug Report Form to submit this as a Bug. Unless everyone complains, nothing will happen.

Check out this free layout and instructions for installing. This is just what I've been looking for since we upgraded to Acrobat X. My attorneys hated reviewing thousands of PDF files that looked like flying cards. http://blog.practicalpdf.com/2012/07/grid-with-file-preview-pdf-portfolio-layout-available -now/

Planning Layout 8A-157

I all,
I would like to find the list of planning layout available on SAP, and especially the planning layout 8A-157.
I would like to customize it via Report Painter, but I couldn't find it anywhere in the system up to now.
I tried transactions CJR2, KPF6, KEPM, KP65.
Thanks for your help.

Hi
Planning layouts you can find in GRR2.. You cant customize layouts starting with a numeric no... You can copy it, make changes and give it a name starting with Y or Z
Once you define this form, click on "Create report" button in the form and your report will be created
Ajay M

9KE0 Reposting profit centre u2013 SAP delivered Layout?

We are trying to repost profit centre for incorrect posting of profit centre entries in 9KE0. There is no SAP delivered layout available in the layout field. This may have been our first attempt of doing reposting for PCA in 9KE0. Anyone knows the name of SAP delivered layout or form so I can import them from client 000? Appreciate any help.

Hi,
if you call 9KEJ, all the available standard layouts will be displayed. You can use one depending on what
characteristic you need. For example: you can use 8A-001, if you only need characteristics profit center and account.
You can also use the transactions 9KES (also 9KET) to define your own layouts for the postings.
There you can only choose the fields which are in table GLPCT and also in structure RPCAC80.
So only this field will be activated forthe layout in 9KE0.
Regards,
Greta

Page layout problem when using more than 3 iviews(with Tab Strip controls)

Hello Experts,
I am using MS Visual Studio 2005 and PDK 2.5 for .net.
I have created four iViews where two iViews are having TabStrip control which are dynamically added to iView.
When I add iViews to the page and view page ,I am not able to see the content of iViews having TabsStrip controls.
But I can see contents with individual iView.I am using 3 columns layout for this scenario.
I have tried all possible layouts available in EP.
How should I placed iViews in page so that contents of iviews having Tabsrtip control will be displayed.
Any help appreciated
Regards
Sunil Pawar

Hi Sunil,
Try changing the isolation property of iView to URL(Isolated) from Embedded-->Save .Now assign these iViews to the page.
For more info,
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/97/0be13dc2fd605ae10000000a11405a/content.htm">Isolation Property</a>
Regards,
Vinoth.M

WebDynpro(ABAP) - Defining a page layout

Hi!
I have the following problem: I want to design a two column page containing at least three WebDynpro(ABAP)-iViews. One is placed alone in the left column and should be around 150 pixel in width. The others are located in the right column and should use the rest of the screen.
I think I have to create my own layout, but I don't know where and how. And I'm not shure if it is possible to get a layout, that dynamically adjust the width of the left column. Is there any standard-layout available, that can do that?
Any hint on that?
Thanks in advance!
Kind regards,
TopperDEL

Hello Michael,
Have a look at this -
In the SAP Enterprise Portal, you can process different application types in special iViews on the same portal page. Here, iViews can be included using different technologies (such as Web Dynpro ABAP, Java, or BSP). The communication between these iViews takes place through an event function u2013 portal eventing (or client-side eventing).
Sample WD ABAP application "subscribing to the event" -
method WDDOINIT .
data: L_API_COMPONENT type ref to IF_WD_COMPONENT,
        L_PORTAL_MANAGER type ref to IF_WD_PORTAL_INTEGRATION,
        VIEW type ref to IF_WD_VIEW_CONTROLLER.
L_API_COMPONENT = WD_COMP_CONTROLLER->WD_GET_API( ).
L_PORTAL_MANAGER = L_API_COMPONENT->GET_PORTAL_MANAGER( ).
VIEW ?= WD_THIS->WD_GET_API( ).
L_PORTAL_MANAGER->SUBSCRIBE_EVENT(
        PORTAL_EVENT_NAMESPACE =
        'my_namespace_for_Web_Dynpro_documentation'
        PORTAL_EVENT_NAME = 'showCustomer'
        VIEW = VIEW
        ACTION = 'RECIEVE_CUSTOMER_ID' ).
endmethod.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/c6/1a73412de25658e10000000a1550b0/frameset.htm
Hope this helps ! ~ Dhanz

How do I rotate a layout when making a book?

I want to use the layout using two pictures. They are both vertical pics, but I can't seem to get it to do anything but landscape.

Did you check to see if there's a layout available with two portrait photos? What theme are you using? What version of iPhoto and system are you running?
OT

Change in Print Layout

Hello,
I am working on a interactive PDF whose Print Layout is different from the screen view of the form.
So what gets printed is different from what is seen on the screen. I have the Print Layout available to me.
Hope I am clear. Can this be done?
I am using Livecycle designer 8 and Acrobat Pro 8.

You can make objects visible only on the screen by selecting Object => Presence => Visible (Screen Only). You can do the same for printing by selecting the Visible (Print Only) option.
Hope this helps,
Mike

Tile Layout in Portfolio - Acrobat X

Acrobat X displays Acrobat Packages in a custom Layout 'Tile'. I find this more attractive than the standard 'cartoony' layouts available. Anyone know where I can download this custom layout from to import to my options? (there is still nothing in Acrobat Users 'Exchange'). OR Why the heck is it not already there for a new portfolio, given that it must be hiding somewhere in the code?

If you tell your user that the links are actually there, they can take the files out of the portfolio - and then the links still works.
The above was written in 2012 - does anybody know if it is still not possible to have the links survive in the portfolio?

Dvorak Keyboard Layout

Is there a Dvorak keyboard layout available for the iPhone?
While I touch type on the standard QWERTY keyboard, I find the Dvorak layout much better suited for typing with my thumbs.
Who do I ask for one if there isn't one now?
Thanks,
Byron

Byron C. Mayes,
You are welcome to suggest it on the feedback page the link for the iPhone is:
http://www.apple.com/feedback/iphone.html
However, speaking personally, I would think the reasons for the way QWERTY is laid out might be valid on the iPhone. QWERTY is laid out the way it is so that letters that are likely to appear together in English are separated to avoid accidental keystrokes.
Hope this helps,
Nathan C.

Bluetooth keyboard layouts

This is really annoying. Although my mother language is Portuguese, for which I have a Portuguese-layout Apple Bluetooth keyboard, I have many emails to which I have to reply and write in English. However, when I select the English language in order to use auto-correct options, spelling, etc., the HARDWARE keyboard layout changes into an English keyboard, and it is completely different from what is indicated in the keys. That is: I have to spend a HUGE amount of time trying to find the proper character.
Worse: you cannot tell the English keyboard to have the layout of a Portuguese keyboard, which would be the way to solve this problem. Therefore, I could write in Portuguese AND in English with the same hardware keyboard layout.
And this is only a matter of software, because if you select the English language you have 12 (twelve!) hardware layouts available, NONE Portuguese, which is spoken, and used, by some 240 million people worldwide.
Please do correct this, with the possible urgency.
Thank you.

ruibvale wrote:
if you select the English language you have 12 (twelve!) hardware layouts available, NONE Portuguese, which is spoken, and used, by some 240 million people worldwide.
By all means send feedback to Apple. I think part of the problem is that Apple considers the US and US International PC layouts to fit the needs of Portuguese users in Brazil and has just neglected the "Portuguese" layout used in Portugal. There is no reason they could not add it to the list. Hopefully more people will raise the issue with them (yours is the only message I have ever seen about it thus far).

2 Layout's for 2 screens different F4 Help needed for same program

Hi Friends,
I have 2 layouts in the selection screen the first layout is for screen 1 and the second layout is for screen 2.
I save the layouts when I run the report.
Now when I do F4 Help for the first layout it shows me all the layouts available for the program and the same thing
for Second layout too.
Is there a way for the first layout I need to get only the layouts for the first screen when I hit the F4 button
and for the second layout I need to get only the layouts for the second screen when I hit the F4 button. in order to choose
I am using REUSE_ALV_VARIANT_F4 and passing report name to is_variant and i_save = 'X'.
Thanks,
chaithanya.

I think this is not possible.
Variant names get stored on Report Name as key.
a®

Bulgarian Phonetic Keyboard Layout on iPad

Hello Apple guys.
The iPad is great. I love it - so do more are more people from Bulgaria.
I was very disappointed to see that it lacks Bulgarian Phonetic Keyboard Layout.
When can we expect to have Bulgarian Phonetic Keyboard Layout available for iPad?
A keyboard layout which is already available in iPod Touch 1g, 2g, 3g, iPhone, iPhone 3G, iPhone 3Gs and ( I hope) in iPhone 4 as well.
It doesn't seem like something very difficult to include Bulgarian Phonetic Keyboard Layout in iPad as well.
When can we expect to have Bulgarian Phonetic Keyboard Layout available for iPad?
Thank you.

Please can anyone who needs Bulgarian Phonetic Keyboard to use the link bellow to provide feedback and request Bulgarian Keyboard with Phonetic Layout.
The lack of Bulgarian keyboard really limits the use of the iPad for me. I have to use my PC for anything that requires typing in Bulgarian...
So far I have not been able to find alternative solution or even an app to satisfy this lack of functionality...

No layout available

Similar Messages

Maybe you are looking for