No longer able to fax with 10.5.8 iMac

Suddenly, I am unable to send a fax. Earlier today I was able to go the fax queue where it showed the fax was being printed and waiting for the internal modem to become available which never happened. Prior to that I was able to send a fax. Now, the document I wish to fax doesn't even show up in the fax queue. I have restarted my computer to no avail and I have also unplugged and replugged my internet connection.

Same issue with me. I use my iMac G5 as my workhorse and it does a great job. Apple doesn't need to turn it's back on the older PowerMacs for the simple fact they are old. I worked for Apple a million years ago and this was their strategy then. It would be nice if a couple of software engineers would look at the code of 10.5.3 versus 10.5.8 and figure out were the comm issue is. This is not a closed issue and does not need to be closed until a true solution is implemented and not a work-a-round that kinda works.

Similar Messages

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Communication Failure: The computer is no longer able to communicate with your printer.

    Hello, I have a HP Officejet J6480 All-in-One printer.  When I try to print, I receive this error message:
    "Communication Failure: The computer is no longer able to communicate with your printer. Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
     I am using a Mac PowerBook G4, OS v10.5.7.  I have tried the following:
    -- rebooted my Mac
    -- turned printer off/on
    -- rebooted wireless router
    -- tried to print using USB cable.
    I continue to receive the same error message. Helllllllllllllllp!!!!
    A couple of other things I need to mention:  I bought this printer in June and have been able to print just fine since purchasing
    this printer. As recently as Friday, July 3, I was able to print and printed 6 or 7 pages then.  This is CRAZY!!!!
    Thanks.
    Barb
    Message Edited by BarbNPhx on 07-05-2009 10:55 AM

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • Genius no longer able to function with certain songs

    A couple of months ago I noticed that Genius was no longer able to work with certain songs that it had previously generated playlists for.
    If this were for little known artists then I could understand, but it is unable to generate playlists for ACDC - Highway to ****, and other 'big' artists.
    Does anyone have any ideas?

    A couple of months ago I noticed that Genius was no longer able to work with certain songs that it had previously generated playlists for.
    If this were for little known artists then I could understand, but it is unable to generate playlists for ACDC - Highway to ****, and other 'big' artists.
    Does anyone have any ideas?

  • Visual Studio 2012 is no longer able to interact with any TFS server

    I can connect to the on-premise TFS2012 server using the instance of VS2012 installed on the server machine as well as the instance of VS2012 installed on a coworker's machine.
    I was able to interact with TFS2012 using the instance of VS2012 installed on my Win7 x64 machine, but only one time. Many reboots later, both of the server itself and my machine, I haven't been able to get VS2012 to interact properly with TFS.
    When I click on "Team" and select "Connect to Team Foundation Server", the "Team Explorer" VS window opens. In that window, no matter what button or link I click on, Visual
    Studio won't connect to TFS or allow me to choose a TFS server.
    1. Clicking on the Home icon takes me to page with two buttons: Pending Changes & settings.
    Clicking on "Pending Changes" takes me to a page where I can do 3 things: click on "no workspace" (nothing happens), click on Actions -> Open Source Control Explorer (which opens an
    empty Source Control Explorer Window, from which I can do nothing), click on "Settings", which shows me a page with 4 options:
    Security: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
    Group Membership: clicking it results in the message "Team Foundation Error. Object reference not set to an instance of an object"
    Source Control: clicking it results in the message "Value cannot be null. Parameter name: serverName"
    Process Template Manager: clicking it results in the message "Value cannot be null: Parameter name: tpc"
    2. Clicking on the "Connect to Team Projects" icon takes me to a page where I can click on either:
    "Configure Team Projects": clicking it does nothing
    "Connect": clicking it does nothing
    "Sign Up": opens a Visual Studio Online page on my web browser
    If I instead go to File -> Source Control -> Advanced, there is only one option which appears to be working:
    Change Source Control. When I click on it I get a window with a table with rows that correspond to the current solution and the projects in the current solution. ie:
    Solution/Project: {item name}
    Server Name: "<No Server>"
    Server Binding: "<No Server>"
    Connected: {gray uncheckable checkbox}
    Status: "Not Controlled"
    Local Binding:
    Provider:
    Relative path:
    The buttons "Connect", "Disconnect", "Browse" are disabled. Clicking on the "Bind" button results in a window with the message "The mappings
    for the solution could not be found" and two buttons: Ok and
    Help. Clicking on Help results in a white window with the message:
    "The 'EurekaPackage' package did not load correctly. The problem may have been caused by a configuration change or by the installation of another extension. You can get more information by examining the file 'C:\User\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml'.
    Continue to show this error message?"
    Clicking "yes" open the following page on my web browser, which essentially tells me to go back to the "Change Source Control" window and unbind the project, which VS is not letting me do:
    http://msdn.microsoft.com/query/dev11.query?appId=Dev11IDEF1&l=EN-US&k=k%28vs.tfc.sourcecontrol.MessageConnectionManagerCantBind%29;k%28TargetFrameworkMoniker-.NETFramework
    The following is an excerpt from the "ActivityLog.xml" file mentioned in the white window that appeared when I clicked on the "Help" button:
      <entry>
        <record>651</record>
        <time>2013/12/20 13:35:53.354</time>
        <type>Information</type>
        <source>Profile manager</source>
        <description>Begin export of category &apos;Source Control_TeamFoundation&apos; ({2A718788-A6D9-44C5-90EF-438BF5B06A74}) from package &apos;Microsoft.VisualStudio.TeamFoundation.VersionControl.HatPackage, Microsoft.VisualStudio.TeamFoundation.VersionControl, Version=11.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a&apos; ({4CA58AB2-18FA-4F8D-95D4-32DDF27D184C}).  3349472 KB of virtual memory currently available.</description>
      </entry>  <entry>
        <record>652</record>
        <time>2013/12/20 13:35:53.354</time>
        <type>Information</type>
        <source>Profile manager</source>
        <description>End export of category &apos;Source Control_TeamFoundation&apos; ({2A718788-A6D9-44C5-90EF-438BF5B06A74}).  3349472 KB of virtual memory currently available.</description>
      </entry>
      <entry> <entry>
    <record>664</record>
    <time>2013/12/20 13:48:51.961</time>
    <type>Error</type>
    <source>VisualStudio</source>
    <description>CreateInstance failed for package [Microsoft.Data.Entity.Design.BootstrapPackage.BootstrapPackage, Microsoft.Data.Entity.Design.BootstrapPackage, version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a]</description>
    <guid>{7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB}</guid>
    <hr>80070002</hr>
    <errorinfo>Could not load file or assembly 'Microsoft.Data.Entity.Design.BootstrapPackage, Version=11.2.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.</errorinfo>
    </entry>
    <entry>
    <record>671</record>
    <time>2013/12/20 13:50:19.757</time>
    <type>Information</type>
    <source>VisualStudio</source>
    <description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
    <guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
    </entry>
    <entry>
    <record>672</record>
    <time>2013/12/20 13:50:19.757</time>
    <type>Warning</type>
    <source>VisualStudio</source>
    <description>Unexpected system error mode before loading package [Visual Studio Web Browser Package]</description>
    <guid>{E8B06F41-6D01-11D2-AA7D-00C04F990343}</guid>
    </entry>
    <entry>
    <record>676</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Information</type>
    <source>VisualStudio</source>
    <description>Entering function CVsPackageInfo::HrInstantiatePackage</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    </entry>
    <entry>
    <record>677</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Warning</type>
    <source>VisualStudio</source>
    <description>Unexpected system error mode before loading package [EurekaPackage]</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    </entry>
    <entry>
    <entry>
    <record>679</record>
    <time>2013/12/20 13:50:19.820</time>
    <type>Error</type>
    <source>VisualStudio</source>
    <description>CreateInstance failed for package [EurekaPackage]</description>
    <guid>{8C28E535-ABC9-4F92-B5C9-6C16617C8884}</guid>
    <hr>80070002</hr>
    <errorinfo>Could not load file or assembly 'file:///C:\Program Files (x86)\Microsoft Visual Studio 11.0\Common7\IDE\Extensions\Microsoft\Web Tools\Eureka\Microsoft.VisualStudio.Web.Eureka.dll' or one of its dependencies. The system cannot find the file specified.</errorinfo>
    </entry>
      <entry>
        <record>559</record>
        <time>2013/12/20 14:30:48.880</time>
        <type>Error</type>
        <source>VisualStudio</source>
        <description>Could not convert file time to system time</description>
        <hr>80070057 - E_INVALIDARG</hr>
      </entry>
    </activity>
    What, if anything, can I do in order to be able to get Visual Studio 2012 to interact with TFS?

    I'll add that when I run devenv.exe with the flag /TFSLink, VS opens a Team Explorer window that contains the following text:
    An exception was encountered while constructing the content of this frame. This information is also logged in "C:\Users\<username>\AppData\Roaming\Microsoft\VisualStudio\11.0\ActivityLog.xml".Exception details:System.NullReferenceException: Object reference not set to an instance of an object.   at Microsoft.VisualStudio.Shell.Interop.IVsShell5.LoadPackageWithContext(Guid& packageGuid, Int32 reason, Guid& context)   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.GetPackage()   at Microsoft.VisualStudio.Platform.WindowManagement.WindowFrame.ConstructContent()

  • A/V Component cables no longer able to work with iPhone 1st Generation?

    I purchased the Apple A/V Component cables to be able to hook my iPhone up to my stereo at work and TV at home. Before the 2.0.1 update, it worked ok. No hassles or problems what so ever. Now, after the 2.0.1 update, I can no longer use this device for what it seems it was made for. It seems that now it's a $50 iPhone charger and that's about it. Anyone know of any fix or maybe something I did to make this happen? I called Apple and they said "that's odd, it should be working" and then asked if I could bring it in.
    Any help would be greatly appreciated.
    Message was edited by: Chargehammer

    It seems it's not just the A/V Component cables that aren't working with the new upgrade. Apparently some other people have had issues with docking stations and speaker extensions after the upgrade. Anyone?

  • HP C4580: Communication Failure: The computer is no longer able to communicate with your printer.

    Hi,
    After having successfully set up the C4580 and run some test printouts which were all very satisfactory, this morning the above message appeared.
    The error message box suggests to "Turn the printer off, check your printer connections and check for printer errors, and turn the printer back on."
    I tried this, but I'm still unable to print. Any suggestions? By the way my computer is a Mac if this helps.
    Many thanks

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • No longer able to backup with Time Machine

    I have backed up my 2.93 GHz 640 GB iMac with 4 GB of memory for years to a 1TB external drive via Time Machine. I'm using OS X version 10.7.5.  I've started to run out of space on the iMac so I got a 2TB external drive to move my photos to.  Before I did anything, I made sure I had multiple backups on both Time Machine and my cloud storage (Back Blaze).  I had backups going back over a year.  I moved my photos via Lightroom and have been able to create one successful backup but now I get an error message that there's not enough space on the 1TB to backup and only the one backup exists in Time Machine.  I've run a Disk Utility on the external backup drive and there are no issues.  I'm not understanding how all of a sudden I can no longer back up when I have the same amount of data, actually less since I deleted some duplicate files.  And all the old backups have disappeared.  I'm concerned that I only have one backup from last night.  It's as though that one backup is huge.  When I try to click on the folder to check the folder size, the drive keeps churning and never returns the file size.  Is this a sign of a corrupted or damaged drive? Any other options or troubleshooting?

    Let's try to make this less confusing:
    You have a 2TB external drive for storing photos. That drive is working fine.
    You have a 1TB external drive for your TM backup. That's the drive with the error message that there's insufficient space on the drive.
    Now, after deleting some duplicate files, the old backups have disappeared.
    I understand that you have multiple backups of your data.
    If you've made multiple copies, and have the data backed up on the Cloud, wouldn't you be able to copy the Cloud copy onto your 1TB external?
    Is it possible that a prior TM backup has the data you need? Are there any error messages on the 1TB external? Is the drive new? (As you probably know, drives either go bad early, or last for years.)

  • ITunes no longer able to sync with Outlook

    Hello,
    This is my first ever post on any forum so please go easy on me.
    I have an iPhone 4s, and iPad1 and run Windows7. I recently tried using iCloud but didn't like the Outlook calendar (appearance or speed) so wanted to go back to just syncing via my USB cable.
    I have followed all steps on here, restoring the iPhone, removing and reinstalling iTunes completely (5 times now) and my phone and iPad will no longer sync, they just sit in never land at either backing up calendar or contacts (I have tried leaving them on for hours at a time). I have now lost my calendar and all of the music off the iPhone so hoping for a solution.
    I have heard iTunes no longer supports syncing via iTunes, they want you to use iCloud but can't find anything definitive on this but it would explain why I can't get this to work.
    Any help would be greatly appreciated as I feel like I have tried everything.
    Thanks in advance.

    Have you tried using Google's sync services that are free yet? It sounds to me like you are not using Exchange for your iPhone with work. So, that would leave it open to use with Google. Keep your Google sync with your work calendar (Outlook), then sync up the Google Calendar with iCal so you have the calendar at home. Separately, setup your iPhone to sync real-time with your Google Calendar using the Microsoft Exchange settings. If all you are trying to do is get your one calendar to be the same everywhere, that will do it and it's all free. Here are links to instructions:
    *Google Calendar Sync To iCal:*
    http://www.google.com/support/calendar/bin/answer.py?hl=en&answer=99355
    *Google Calendar Sync To iPhone:*
    http://www.google.com/support/calendar/bin/answer.py?hl=en&answer=99355
    *Google Calendar Sync To Outlook (sounds like you already have this setup):*
    http://www.google.com/support/calendar/bin/answer.py?hl=en&answer=99355
    Unless I missed a detail, I think that does it for you.
    Message was edited by: supermurph

  • IPhone 4s no longer able to sync with iTunes

    My iPhone 4s seems to be going through the motions of synchronising and I haven't had any synch issues prior to now but I can no longer transfer files to the phone.  iTunes is showing my phone and contents in the sidebar but every time I try to synch a digital movie download (from Paramount and specifically downloaded for iTunes to and to play on all Apple devices) and a music track ripped from one of my cd's I receive a notification with either 'iPhone locked' or 'not recognised.' I have tried sending the files both via iTunes and My Document files and also synchronising from the phone itself. I have also un-authorised and re-authorised my laptop but am now at a loss as what else to try I have tried searching the communities but have been unsuccessful so any advice would be greatly appreciated.
    Many thanks.

    I also had this issue since updating to iTunes 12.  My phone was not showing up in "devices" at all, yet it was syncing to iPhoto just fine.  What ended up fixing the issue for me was turning both my phone and computer off and back on again, and unplugging any other USB devices so that only my phone was the one connected.  It then synced just fine.
    FYI, I am running iOS 7.1.2 on an iPhone 5

  • WSUS errors - no longer able to sync with MS

    Our environment is SCCM 2012 R2 CU1.  We have a primary site server with local SQL (2012) on a Windows 2012 R2 server.  We also have WSUS and the SUP on this server as well.
    Permissions were changed on the C:\Program Files\Update Services folder.  TrustedInstaller was the owner.  This was changed, which in turn "broke" WSUS.  The permission was restored back to TrustedInstaller.  Unfortunately,
    there were other permission changes as well.  Subfolders under the C:\Program Files\Update Services have domain\Domain Admins as the owner.
    Due to these changes, I can no longer sync with MS for updates.  There are also multiple errors for the SMS_WSUS_CONFIGURATION_MANAGER, SMS_WSUS_CONTROL_MANAGER and the SMS_WSUS_SYNC_MANAGER.
    In the wcm.log file, the errors are:
    System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.ApiRemoting' threw an
    exception. ---> System.UnauthorizedAccessException: Access to the path 'Update Services' is denied.~   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)~   at System.IO.Directory.InternalCreateDirectory(String fullPath,
    String path, Object dirSecurityObj, Boolean checkHost)~   at System.IO.Directory.InternalCreateDirectoryHelper(String path, Boolean checkHost)~   at Microsoft.UpdateServices.Log.GetUsableLogFileName(String fileName, LogFileLocation&
    actualLogLocation)~   at Microsoft.UpdateServices.Log.InitializeFromConfig()~   at Microsoft.UpdateServices.Log.InitializeIfNeeded()~   at Microsoft.UpdateServices.Internal.ApiRemoting..cctor()~   --- End of inner exception
    stack trace ---~   at Microsoft.UpdateServices.Internal.ApiRemoting..ctor()~   --- End of inner exception stack trace ---~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~  
    at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
    Remote configuration failed on WSUS Server.
    In the wsusctrl.log file,
    System.Web.Services.Protocols.SoapException: System.Web.Services.Protocols.SoapException: Server was unable to process request. ---> System.TypeInitializationException: The type initializer for 'Microsoft.UpdateServices.Internal.ApiRemoting' threw an
    exception. ---> System.UnauthorizedAccessException: Access to the path 'Update Services' is denied.~   at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)~   at System.IO.Directory.InternalCreateDirectory(String fullPath,
    String path, Object dirSecurityObj, Boolean checkHost)~   at System.IO.Directory.InternalCreateDirectoryHelper(String path, Boolean checkHost)~   at Microsoft.UpdateServices.Log.GetUsableLogFileName(String fileName, LogFileLocation&
    actualLogLocation)~   at Microsoft.UpdateServices.Log.InitializeFromConfig()~   at Microsoft.UpdateServices.Log.InitializeIfNeeded()~   at Microsoft.UpdateServices.Internal.ApiRemoting..cctor()~   --- End of inner exception
    stack trace ---~   at Microsoft.UpdateServices.Internal.ApiRemoting..ctor()~   --- End of inner exception stack trace ---~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~  
    at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer()~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String ServerName, Boolean UseSSL, Int32 PortNumber)
    Failed to set WSUS Local Configuration. Will retry configuration in 1 minutes
    The SMS_WSUS_CONFIGURATION_MANAGER messages are Message ID 6600:
    WSUS Configuration Manager failed to configure upstream server settings on WSUS Server "server.domain.com".
    Possible cause: WSUS Server version 3.0 SP2 or above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP2 or greater is installed. Verify that the IIS ports configured in the site are same as those configured on the WSUS IIS website.
    The SMS_WSUS_CONTROL_MANAGER  errors are Message ID 700 and 7003:
    WSUS Control Manager failed to configure proxy settings on WSUS Server "server.domain.com".
    Possible cause: WSUS Server version 3.0 SP2 or above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP2 or greater is installed. Verify that the IIS ports configured in the site are same as those configured on the WSUS IIS website.You can receive failure because proxy is set but proxy name is not specified
    or proxy server port is invalid.
    WSUS Control Manager failed to monitor WSUS Server "server.domain.com".
    Possible cause: WSUS Server version 3.0 SP2 or above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP2 or greater is installed. Verify that the IIS ports configured in the site are same as those configured on the WSUS IIS website.
    The SMS_WSUS_SYNC_MANAGER errors are message ID 6703:
    WSUS Synchronization failed.
     Message: WSUS server not configured. Please refer to WCM.log for configuration error details..
     Source: CWSyncMgr::DoSync.
      The operating system reported error 2147500037: Unspecified error
    The SUP WSUS configuration is set to use ports 8530/8531.  We do not have "Require SSL communication to the WSUS server" selected.
    We do have both "Use a proxy server when synchronizing software updates" and "Use a proxy server when downloading content by using automatic deployment rules" selected. 
    We do not use a WSUS connection account.
    If I open the WSUS console, I cannot connect to the server at all.
    In IIS, under the WSUS Administration site, the bindings are set to http-8530, https-8531.  Authentication for the site has the "Anonymous Authentication" enabled.
    I'm trying to restore the permissions and get WSUS working again without having to un-and re-install.
    Is there a document which outlines the permissions needed for the C:\Program Files\Update Services folder(s)?

    Unfortunately, what I've found is that you cannot remove WSUS and leave the DB (at least in Server 2012 R2).
    So the only option is backup the SUSDB, remove WSUS and the DB, reinstall with a new DB, then restore/replace with the "original" SUSDB.

  • Not no longer able to sync with Outlook

    I recently upgraded to Windows 7 on my computers.
    Ever since, I have not been able to sync on any of my computers with my storm.
    An error message of "No available messages stores" comes up when trying to set up the sync parameters.
    Does anyone know what this means and or is it a Windows 7 issue????
    Many thanks for your help.

    On your new computer, to what are syncing? Outlook?
    Read this:
    No available messages stores
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Changed our ASA IP address and we're no longer able to Authenticate with RSA.

    Hi,
    We changed our ASA IP last night and since then we can no longer authenticate with RSA.  I know we had to modify the IAS policy on our DC to the new IP but I'm not sure where I would change that in RSA.  Any one have an idea?
    ASA 5510 (8.3)
    RSA (6.1)
    Thanks.

    I don't have
    /* Style Definitions */
    table.MsoNormalTable
    {mso-style-name:"Table Normal";
    mso-tstyle-rowband-size:0;
    mso-tstyle-colband-size:0;
    mso-style-noshow:yes;
    mso-style-priority:99;
    mso-style-parent:"";
    mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
    mso-para-margin:0cm;
    mso-para-margin-bottom:.0001pt;
    mso-pagination:widow-orphan;
    font-size:11.0pt;
    font-family:"Calibri","sans-serif";
    mso-ascii-font-family:Calibri;
    mso-ascii-theme-font:minor-latin;
    mso-hansi-font-family:Calibri;
    mso-hansi-theme-font:minor-latin;
    mso-bidi-font-family:"Times New Roman";
    mso-bidi-theme-font:minor-bidi;
    mso-fareast-language:EN-US;}
    > Programs > RSA ACE Server
    I have the following...
    RSA Authentication Manager Configuration Tools > RSA Authentication Manager
    RSA Authentication Manager Configuration Tools > Configuration Management
    RSA Authentication Manager Configuration Tools >  Replica Management
    RSA Authentication Manager Database Tools > Compress
    RSA Authentication Manager Database Tools > Dump
    RSA Authentication Manager Database Tools > Load
    RSA Authentication Manager Control Panel
    RSA Authentication Manager Host Mode
    RSA Authentication Manager Log Monitor
    RSA Authentication Manager Remote Mode
    RSA Security Center
    Where would I find the configuration from those items?

  • Why is my iPhone no longer able to communicate with adobe bridge cs3?

    We have 2 iphone 4's that I have been able to download photos from and into my imac for the last year while using the adobe bridge cs3. Recently, it began giving me  an error meassage: " Adobe bridge cs3 cannot obtain files from this device. Please ensure that the device is connected properly,or that the battery is charged, adn try again".
    I did both and that message still pops up. My usb ports are working fine as well as the usb cords(as far as I know of) and the batteries are fully charged when I do so. So what is the deal here??? If anyone can please help I would greatly appreciate it.
    Thanks!!!

    Maro,
    I'm running VISTA on my PC. None of the suggestions solved the problem. I uninstalled iTunes removing all suggested files from another post and reinstalled iTunes 11.1.3 and removed the iTunes Ibarra from my iPhone Remote. I restarted the computer, iPhone &amp; router. I added the iTunes library to my iPhone remote. I didn't get an icon on the menu bar of the iTunes on the PC but a dialog came up asking for the code which was on my phone. I typed in the code and the library showed up on my iPhone Remote. I selected it and got an error message that it couldn't connect. This is extremely weird and frustrating. What should I do now?
    Jake

  • Airport Extreme no longer able to connect with PPPoE

    Came home last night to find the amber light blinking on my Airport Extreme 802.11n. I figured it and the DSL modem needed a power cycle (they often do). However, even after power cycling several times I was still unable to connect to the internet. When I plugged my macbook pro directly into the DSL modem and used a PPPoE connection I have set up for just these times, it connected instantly. I tried upgrading the airport to the most recent firmware, no change. I tried downgrading several times until I got all the way back to the 7.3 release. Still no change. I have the macbook set to display connection time in the menu bar. When trying to use the airport for internet, it keeps saying "Connecting to PPPoE" but then fails. It will keep trying and failing.
    I've had this exact setup for years, no problems. Could it be that the base station is dead? I can't understand how that could be since it seems like a software thing? Please help with any thoughts! Thanks.

    I've only just got a Vigor 120 ADSL Modem (PPPoA->PPPoE bridge) and had some problems of a similar nature. Part of the problem (something Apple could address if they wanted) is that if you set it to PPPoE for WAN port, it can't talk plain Ethernet on that port so you can't see the ADSL status without unplugging the ethernet which of course resets the ADSL connection. It'd be nice if Apple allowed it to work. The easiest "option" I think they could add would be:
    On the PPPoE page, an option "Route private addresses outside PPP" default to off.
    Enabling this would mean any routed IP (modem is 192.168.2.1, airport LAN is 192.168.1.1/24) would not be PPP encapsulated if it was a private address (192.168..., 10...) allowing the status page to work and not breaking anything internet wise. I'm sure this wouldn't just be useful to me... Tell you what, Apple, if you make this happen, I'll upgrade to the new 802.11n dual band.
    I was getting "Looking for PPPoE host" "Negotiating PPPoE connection" for ages. Some combination of resets and replugging the ethernet cable to the back of the modem did fix it, I haven't worked out exactly what works reliably yet and I don't want to screw up my signal->noise ratio more by doing unnecessary modem resets.
    Message was edited by: Faye Pearson

Maybe you are looking for