No message in Monitoring

Hello guys , i did saw some previous posts based on this : but while sending some data from R/3 --> XI using proxy i dont see messages in Moni , each message seems status scheduled? i am doing this for first time.

Hello,
i did the same when i had a similar problem , try registering ur queues if its first time u r using proxy.
here is how u can do it :
Go to Transaction SMQR : Registration(F6) from menu : then dialog pops up :
Queue Name: *
EXEMODE: D
MAXTIME: 60
USERDEST :
NRETRY: 30
TDELAY: 300
vara
[Please reward for Posting]

Similar Messages

How to pass self-defined message to Monitor

Hi all,
i am asked to define several Exception situations and pass the message to monitor if any of the exception situation occurs. Can anyone give me a sample code?
This is what I wrote, but it didnt work... please help! Thanks!
Message Z***** (message ID)
          001 : *****. (message number and text)
          002 : *****
          003 : *****
          004 : *****
          005 : *****.

Hi Linda..
Use like this:
Either declare the Message id at the top of the report:
REPORT zxxxxx
MESSAGE-ID <msg id name>.
Else, you can use the message id in the message too..
MESSAGE <message type> <message no> (<message id>) WITH text.
Where, message type can be E, I, W or S.
For ex. MESSAGE E999(ZZ) WITH 'Incorrect entry'.
Thanks and Best Regards,
Vikas Bittera.

SWL order Error message on monitor 'Sum of % 200.0 exceeds 100%'

Dear all,
i am getting the following error for shop with limit order.
User has created A SWL PO with all identical data like vendor, Pur org, product category and only description change for 2 lines. Its showing only one PO which is in 'Error in Process' .
How can a cart with two lines convert into a 2 line PO ?? as per standard SRM it should create 2 different PO.
Noted that Error message in monitors reads 'Sum of %>200.0<exceeds 100%' in RZ20.
Line 1 reset. Sent to for approval. Ran resubmission process - did not work
Error in process. Error message in monitors 'Sum of %>200.0<exceeds 100%'>

Hi,
I think that the error is with the backend system which cannot handle 2 limits for one PO...
There is an OSS note...
Kind regards,
Yann

Out of range message on monitor screen

Have a Mac Mini desktop. On startup of computer, monitor, everything is normal. When monitor goes to sleep, and I wake it up with the mouse, I get an "out of range" message on the screen. My monitor's resolution specs call for a 1280 x 1024 resolution with 60 Hz. I have set that as the required resolution, but it still displays the message on a black screen. I have tried not shutting the monitor off completely and turning it back on, as well as letting it go to sleep after 7 minutes. Nothing stops the message from displaying.
Could my video graphics be going bad? Had some power surges 2 weeks ago with the energy company, and wonder if those surges could have affected my Mac somehow?
Anyone with a suggestion?

Hello,
See if it's related to this...
The 2012 macs (and later apparently) not waking normally from sleep after hours being in sleep. (noted here ...
http://www.xlr8yourmac.com/archives/feb13/022813.html#2012macswontwake
"Why 2012 iMac/2012 Mac Mini won't Wake After Hours of Sleep (Hibernates/Powers Off)")
The sleepimage file still reappears even if never slept. Delete it (hibernate off, etc) - within minutes its back.
A note on that here - http://www.xlr8yourmac.com/feedback/Chameleon_SSD_Optimizer.html
About iMac sleep...
http://forums.macrumors.com/showthread.php?t=1529750
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

How to post own message to monitor RSMON from transfer rules

I'd like to post descriptions for errorneous (for business process, not for R/3) data which drop package by setting ABORT <> 0 or RETURNCODE <> 0.
How can i do this in start routine for transfer rules and in transfer rules themselves?
I tryed RSSM_MON_WRITE_MONITOR_IC and RSAL_LOG_WRITE. But really this messages don't appear in monitor. The most i achive is to show message during "sumulate transfer" using RSSM_MON_WRITE_MONITOR_IC.
And another thing, that I don't want to create my own message class and messages, Just to post text as error. Is that possible?

Hi,
I had given wrong answer.
Appending lines to MONITOR is only poosible when we want to create logs for wrong data at the time of Update Rules.
Here You will create a routine for an info object.And then you check some condition .If it is not satisfying you will add lines to MONITOR. Here you donot require to declare it. It is already declared in Program RS_ROUTINE.This program will be included for each routine of upadte rule.
In the similar mannner, you will add lines to G_T_ERRORLOG , in transfer routine,if want to give error message at the time of transfer rule. Here you donot require to declare it. It is already declared in Program RS_ROUTINE.This program will be included for each routine of Transfer rule.
With rgds,
Anil Kumar Sharma .P

"no signal" message on monitor

A friend gave me her lenovo 3000 h series desktop. I am attempting to set it up. I have hooked up all of the wires that I know of. (we took it apart and I brought it home and am now attempting to connect it). The monitor when turned on displays "no signal" and nothing else. Any thoughts?

Hey dkcowles,
The monitor, is it using a ..
1. VGA input - http://www.firebird-systems.com/graphics/tuners/cmt345_files/dual_vga_cable.jpg
or
2. DVI input - http://www.serialdigital.com/wp-content/uploads/2008/11/dvi_connector.jpg
Depending on the back of the computer, its either a DVI or a VGA type.
if your monitor is VGA and the computer is DVI.. you will need a converter. and if you are using a converter and you get that error of "no signal" .. try changing the converter.
or you could test the monitor on a different computer
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

Message Que Monitoring in ECC

Dear All Gurus,
I need your expert advice on this...
We have PROXY to JDBC (asynchronous - scheduled job running) and WSDL (PROXY) synchronous scenario running at our client org.
IF im not mistaken for Que Monitoring I need to login to ECC - R/3 (not PI) server and use ex : SMQ2 for this...
Is there any way to do message monitoring without loging to ECC for SMQ2 monitoring..
Our client has tight policy on ECC - R/3 - production system user license since it is a limited...

Hi Tharu - You won't be able to monitor the queues without logging in but what you can do is setup alerts for any failures.
May be you can make of QRFC API something like explained in the below blog..
SAP XI/PI: Alerts for Queue Errors

Too many messages in monitoring

My scenario is
FileSender -> BPM -> FileRecever && JDBCRecever
In Integration Engine monitoring I see 9 rows for 1 message!
1. FileSender -> BPM
2. FileSender -> BPM
3. BPM (Branched)
4. BPM -> FileRecever
5. BPM -> JDBCRecever
6. BPM -> FileSender (Acknowledgment)
7. FileRecever (no receiver)
8. JDBCRecever (no receiver)
9. FileRecever (no receiver)
Could you explain why are there 2 senders ( rows 1,2)
2 senders (rows 7,9) ?
Could you explain the existence of rows 7,8,9 without recever ?

> You are using fork step rite???
I am not using fork. It is a simple BPM with only receiver and send step.
> As i understand your scenario is sending the same message to a file and database
Yes. I understand a branching. But Why are there 2 pair of senders(1,2 and 7,9) ?

Message on monitor when cartridge is changed?

Everytime I install a new ink cartridge a message appears on the monitor "Genuine HP print cartridge installed". Since I have installed three cartridges there are three of these messages, I have to click OK on each one to clear them. Everytime I print anything, they reappear and OK has to be clicked three time to clear them. How can I remove these messages and stop them from appearing everytime I print a document???...................David

Try the following: go to Start, Control Panel, Printers and Faxes, right click on the Officejet 7310, Properties, Ports and uncheck the box for "Enable bidirectional printing".
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

No show message in monitor for processed XML messages

Hi,
I get the document 'VALIDANTING A CONNECTION BETWEEN SAP R/3 AND SAP XI WITH RFC' and following the steps until step 9 it's ok but I can execute the step 10 I get 2 problem:
First Problem - I dont know where see the ABAP code STFC_CONNECTION, How do you know?
The Second Problem is the step 11 the system not show message and the documentation show message.
Please Help-me.
Any Ideas ?
Regards.
Mattos.

Hi, Ashish thanks for anwser my doubt.
So, the step 10 is "10. Refer to the following ABAP code snippet for executing the STFC_CONNECTION programmatically
instead of using the user interface shown above.
Call STFC_CONNECTION to send/receive request/response to/from XI***
DATA: v_msg_text(80) TYPE C. "Message text
CLEAR v_msg_text.
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'XI'
EXPORTING
requtext = 'REQUEST_TEXT'
EXCEPTIONS
communication_failure = 1 MESSAGE v_msg_text
system_failure = 2 MESSAGE v_msg_text.
IF SY-SUBRC NE 0.
**Write your code here**
ELSE.
**Write your code here**
ENDIF."
and the setep eleven is "11. Check the Integration Engine monitor for the processed XML messages (SXMB_MONI):
Shows Sender Interface:"
But I not see messege in my Monitor.
Other doubt in step 5 the document order to create the RFC_Sender Communication Channel, this configuration have the parameters PROGRAM ID (mandatory), we dont have any idea what input there, Can you Help-me? How can find this parameters? in document we have the exemple INTEGRATION_SERVER.
Thanks.
Regards,
Mattos.

When opening Elements 13 I have a message The monitor profile "Dell S2340L color profile, D65" appears to be defective. I have a new Dell PC with Windows 8.1?

When I open Elements 13 I have a message. The monitor profile "Dell S2340L color profile, D65" appears to be defective. I have a new Dell PC with Windows 8.1

You can check if the standard Srgb profile has been change.
Close Elements.
Go to Start menu >> Control Panel >> Color Management.
Click the Devices tab.
From the Device pop-up, select your monitor.
Check the ‘Use my settings for this device’ checkbox.
Make a note of the currently selected profile, which is marked as (default). If there isn’t an existing profile, you can skip this step.
Click the Add button.
In the Associate Color Profile dialog, select sRGB IE61966-2.1 (sRGB Color Space Profile.icm) and press OK.
Back in the Color Management dialog, select the sRGB profile and click Set as Default Profile, and then close the dialog.

Complete message flow Monitoring from webclient to SAP CRM system

Dear Friends,
I need some step by step monitoring guidance for my scenario friends.
My Scenario:
Webclient-->PI7.0--
>SAP CRM
-<-- <--
Step !:
1. When webclient send the SOAP Request to PI through sender soap adapter with qos (Best Effort )
2. It reaches PI and send the data to SAP CRM sytem *through Server Proxies ( Mode - sync )*
3. I have creted wsdl file in ID and send the file to the person who is working in webclient.
When a webclient send the request it waits for the response.
I need your guidance on how to monitor the as a step by step guidance.
Friends i am a Novice to PI.
Kindly help me.

Hi friends,
When i run the transaction I am getting the following error in SXMB_MONI in PI
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
<SAP:P1>401</SAP:P1>
<SAP:P2>Unauthorized</SAP:P2>
<SAP:P3 />
<SAP:P4 />
Kindly suggets me what i need to do...

Can Iphone 4 activity (including internet activity - facebook messages) be monitored by someone if they had access to your phone (like a family member)? How can you check?

I am wonderimng just how safe the iphone 4 is - if someone has access to your phone (say a family member) can they put sometrhing on ur iphone (that isn't jail broken) that tracks your activity - particularly things like messages in facebook (by using the messenger app that you can down load from the app store)? If so is there anyway to tell if it's been done? Everything I read seems to indicate that its not possible to install spyware on an iphone - but strange things happen - including slow response and being logged out of online accounts (ie facebook messenger). I know that one solution would be to restore to factory defaults but when you do this is it ok to restore your phone from back up or should it be rstored like a new phone (especially if the itunes account is a shared account)?
I keep thinking I am just being paranoid but it would be good to get some up to date advice about this.

That's the great thing with ios is it uses a sandbox file system. So installing spyware confines it to its sandbox so it cannot access other file or track anything. Unless you jailbreak at that point there is no more sandbox.

XI Message performance monitor / alert

Hi Experts,
I need your help, i'm involved in a project to monitor some XI aspects and I need to check if all of them are possible and of course if you know.. how
The XI topics that I'm already confuse are:
- XI Mapping Performance: It is possible monitor the performance of the mapping process? if yes how?
- XI Backlog Monitor. The same than above, is possible? how?
- And the last one is FTP directory backlog monitor.
All comments will be much appreciated.
Best regards and thanks in advance.

For setting alerts and monitoring in Integration / Mapping side you might use RZ21 / RZ20 CCMS, it has a good number of options based on setting tolerances and thresholds. I haven't done what you are trying to do in terms of alerting for a transaction that is running too long, but I would like to do this sometime.
For setting alerts at the Adapter / J2EE level you might try the alert configuration in Runtime Workbench.
I've also heard of a tool called Wiley Introscope that might help with the end to end monitoring and alerting when integrated with Solution Manager.
Sorry I don't have direct answer but these are some areas you can look if you don't want to develop custom abap.
-Aaron

Error Message - in Monitor Screen

Hello ,
In the monitor screen i am seeing the error
Data Package X : arrived in BW ; Processing : Data packet not yet processed
Update PSA / Transfer rules / Update rules / Processing end OK .
I am seeing Update ( 0 new / 0 changed ) : Errors occurred .
I checked the other forum stuffs and came to know i need to process the data package manually .
Is it correct .
What about the other data package data .
I mean if i do it manully the other data is updated to target and the request turns green .
And the total data of all the data package i can see in the target
I checked the dumps already nothing is there .
Edited by: Rahul Rai on Apr 6, 2009 5:22 PM

Yes you can try to load the data manually package by package...
For manually loading the data do the following:
Go to RSMO for your request
Go to menu Edit -> Init. Update -> Setting for further update -> Package should be processed in the background
Then under the Details tab, go under Transfer (IDocs and TRFC), right click on each data package and select 'Manual Update'.
This will need to be done for each data package...the request will turn green once all the data packages are processed
Hope this helps,
Sita.
Edited by: Sita Pulavarti on Apr 7, 2009 11:20 AM

No message in Monitoring

Similar Messages

Maybe you are looking for