No more bugs in C !!! just use PARASOFT solutions and forget about it all !

Just some quick links to the PARASOFT homepage ( www.parasoft.com ) so you can see how YOU could develop bug free applications in C. These are tools developed by professionals for professionals.
Check out how powerful they really are by trying them out.
Insure++ (runtime error detection tool )
http://www.parasoft.com/jsp/products/home.jsp?product=Insure
CodeWizard (automatic code review )
http://www.parasoft.com/jsp/products/home.jsp?product=Wizard
C++test ( automatic unit testing and coding standards enforcement)
http://www.parasoft.com/jsp/products/home.jsp?product=CppTest
Just have a look , try it out and see for yourself !!

Yes for the empty dataview problem try this:
Create a project wich measures for example 3 signals, create a dataview with 3 views in, one for each signal,
save the project.
Then open that project again and in my case there is then just one Dataview with no more subviews anymore,
also there is no signal bounded to the view anymore, so in fact I'm left with just an empty Dataview...
I normally measure a number of signals at a time, 8, 12, or so and I define datviews (tabs) with the raw signals, then with the
filtered versions, then with fouriers for example, that is one of the main reasons We buyed SE because it gives us this nice
view on different signal aspects in different tabs, once the project is running no problems (exept for thos damn Y scale labels overwitten
off course) but when I save the project and reopen it again, from the 5 tabs with lets say 3 views each only one remains intact,
the other views seem to have lost their layout or subviews or what you call it....
I can reproduce this error every time I save and re-open a project... but one time if I have 3 tabs with dataviews it clears to views,
the other time it clears one... very strange.
What exactly is saved with each project? I do hope the layouts of the tabbed windows also? It is annoying to redefine the views
each time I open up a project (the essence of SE is just to be able to measure signals, save the project and two hours later be able to
just open the project again and measuring immediately or am I wrong? It is a loss of time if I have to "makeup" the views again
just by opening the same project again!)
Kind regards,
PBRM

Similar Messages

TS1314 Dear all, greetings, I did not mean to offend anyone by typing all my texts in capital letters, I am just used to it and at my age (63) it is better and easier for my eyes to type all the texts in my messages in capital letters.I do apologize about

Dear all, greetings, I did not mean to offend anyone by typing all my texts in capital letters, I am just used to it and at my age (63) it is better and easier for my eyes to type all the texts in my messages in capital letters.I do apologize about it all. I can assure you that I do respect all of you more that you maight me thinking of. i have the same difficulties in typing in small letters like yours in reading texts in CAPITAL letters.......tant pis, c' est la vie
For web and computing experts I would like to remind them that all the peoples nowadays have the same needs (or hobbies if you wish) regarding the electronic devices, web, compouters, softwares and that sort of thing.
If I WERE not to have technical support because of my prefiously used capital letters in me text messages, I have to confess that next time I will be more carefull about the devices producers........ I live and always learn (SOCRATES, girasko, aei didaskomenos)
Two questions
1. I noticed on the you tube videos about the new ipad that the main icons are more than mine (i.e. the icon of facebook and a number or others are missing)
2. I would like to ask you to do me a favour, thanks for your patiene. Still I have not understood how (in which way, the pictures, transfered from my system or new taken by the ipad camera are uploaded directly to the FaceBook. I suppose that I will not have the same difficulties regarding the videos to both Facebook AND YoutTube. Thanks a lot for your patience with me, from now on I will be more carefull about posting messages to you referring to technical support
Constantinos
Athens, Greece

Some of the apps shown in adverts / videos have been downloaded from the App Store, they don't come pre-installed e.g. the Facebook app is a free download the app store : 'official' Facebook app.
To upload photos to Facebook you can use the above app - you can't, for example, use Safari on the iPad to upload content to sites.
Not sure whether any apps allow you to upload videos to YouTube (I don't use the site).

Can two accounts just use one macbook and one iphone.error occurred talking to the iTunes store

I have two accounts(A and B), of course I just use one iphone and one macbook.
but now ,the problem is,
the account A can use xcode organizer to upload App,
and the account B can't upload in the same MAC and Xcode,
the error message is: error occurred talking to the iTunes store
and the console print: *** Error: An error occurred while deserializing the JSON request. Error Message - Invalid JSON character read at index 0
(of course if I change from account B to A, upload success）
it cotinue for three days, of course there are many people have the same problem.
must I buy another iphone ,another macbook,and install another xcode
I am so sad.
thank you

the problem is , .ipa can't upload by(in) account B
I think the bug can be two possible list blow
      1. the .ipa is wrong
      2. the account(B) is wrong.
if   the .ipa is wrong
the .ipa can't upload by any account (account A or account B, just change the identifier and the sigh identity)
but if the .ipa can upload success by account A,
so , the .ipa(program) is right.
then, there is exist only one possible,   the account (B) is wrong,
K T , do you thine my logic for this problem is right

I am using iPhone 5 and tried to Erase All Contents and Settings but it is just showing an apple sign on the screen and nothing is happening now for about 3 days now. All it does is eat up my battery and still show apple sign after charging! Help!!!!

I am using iPhone 5 and tried to Erase All Contents and Settings but it is just showing an apple sign on the screen and nothing is happening now for about 3 days now. All it does is eat up my battery and still show apple sign after charging! Help!!!!

Hi DaVince Vince,
I'm sorry to hear that you are having issues with your iPhone. I also apologize, I'm a bit unclear what issues you were having that led up to the attempted Erase All, and/or exactly what behavior you are seeing now (restarting, not responding at all, etc). If you are seeing an Apple Logo screen and your iPhone does not appear to be starting correctly, you may find the following articles helpful:
If your iOS device restarts, displays the Apple logo, or powers off while you're using it - Apple Support
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Regards,
- Brenden

Hi All. My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.

Hi All,
I tried to search through the community, but with the sheer volume of posts, I didn't find anything that seemed like the same issue.
My iPad 4 just started having issues with the volume. On either Bluetooth or the iPad Speaker, anything I'm watching or listening to drops the sound to just barely hearing it and then, about 2 seconds later, it comes back.
I haven't tried wired ear phones, but I am sure they'll be the same way.
It's very random, but consistent enough to happen several times per day.
Thanks for any help that anyone can provide.
I have restarted it and also did a Hard Reboot and it didn't help.
Thanks Again,
Scott P.

Well there you go, when you advertise it just be sure to say that you can't even see the scratches at half brightness and see how it goes.
Of course you are saying you want $500 for one with many scratches on the screen, has been dropped, but the scratches aren't visible at half brightness, and has no warranty. Or I can buy a refurbished iPad 4 WiFi 32 GB directly from Apple with no scratches and a one year warranty for $499. http://store.apple.com/us/product/FD514LL/A/refurbished-ipad-with-retina-display -wi-fi-32gb-white-4th-generation
Why would I buy yours?
I wouldn't pay more than $300 for a used model with your specs in perfect condition. But yours is far from perfect. I think your high point is $250 which is why I said 50%.

Should I just keep Logic Pro and forget Pro X for now? ...

Should I just keep Logic Pro and forget Pro X for now?
Have Mavericks.
Have not been recording/using Logic since getting Mavericks, but getting ready for new projects.
How is old Logic Pro (not X) working with Mavericks? And X?
Are the upgrades in X worth the hassels I'm reading about on this forum?
Lena

As long as you have Logic 9.1.8 it will run fine under Mavericks. If there is no impending need to go to Logic X then don't bother. Updating for the sake of it when everything is working ok is not something I do. I only went to logic 9 from 8 about 7 months ago. Had the box install of 9 for a couple of years before moving to it because I had no need.
If you do decide to go to Logic X make sure you have 64bit versions of any 3rd party plug-ins.
There are some good features in Logic X but do you need them and do you need to move?

Word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

word has stopped working on my macbook air, i have used it before and powerpoint etc are all still working, but i can no longer open word or word files can anyone help?

Hi Rachel,
Have you tried reinstalling Microsoft Word? Have you tried reinstalling Office? Have you run any updates recently for Microsoft Office? There was one that came out this week. You may wish to ask this question over at the Microsoft Word forums, there's a good chance you'll get a better answer as well. This forum is primarily designed for the MacBook Air hardware and interoperability with OS X on a MacBook Air.
http://support.microsoft.com/gp/cp_macoffice2008_master

Just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

just download lightroom cc and not open at all. Have desistarei and will install several times and the problem continues ... I need a solution .. thank you Operating System Windows 7 64bit

Try the following user tip:
Troubleshooting issues with iTunes for Windows updates

I just bought an imac and want to transfer all my music from an iphone to imac - how is this done please

i just bought an imac and want to transfer all my music from an iphone to imac - how is this done please

1) authorize iTunes on the new machine for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPhone but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPhone with it.
for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip.

Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please

Hi there, I have much files saved on pages ( ios ipad) , I just open it today and did not find .all the files !!!! Just 4!!! Taken in consider that I did not delete or making any wrong action. How I can return the lost files!!!! Help please
its very important files!

tis true
I know, I always do that but I was in a rush to get somewhere and I was relying on my thousand dollar Mac to do some kind of recovery or something. I know Microsoft always keeps temporary files (I think Mac does too, part of me asking here in this forum was for someone to tell me where I can find those files) and when you go to open Office Works then it gives you the option of opening the last recent documents, saved or not saved.
I usually copy paste into my emial just in case something goes wrong with the created document but I just didn't have the time to login and do all that My loss, you live and you learn, BUT still if ANYONE got any info on this, PLEASE DO CHIME IN *keeping the hope alive*

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces?

Why can't GB let me use 'electric guitar' option when using Nio 2/4 interface - I have to use real instrument and miss out on all the effects. Is this normal for all interfaces? The Nio reads hte guitar but GB doesn't....

Usually effects packages are AU plugins that would have no effect on track selection. Interfaces should have no control over what kind of track you can select. I really think something else is going on her maybe something you overlooked.
Did you choose the input channel in the track info pane. Try both channel 1 mono or channel 2 mono. Make sure the track is record enabled.

I've just installed mountain lion and my files are all out of their previous folders. Can I set them back or do I need to manually put them back in order??

I've just installed mountain lion and my files are all out of their previous folders. Can I set them back or do I need to manually put them back in order??

Hi Thomas,
Thanks for the response. So, after the computer did it's restart thing after installing I went into finder where I usually have everything come up including my Macintosh HD folder and all it's folders and files.. Anyway it was this that hadn't come up and all the files were listed under All My Files and out of all their folders. I totally switched the computer off after posted the problem and now having switched it back on I see that it's all there and in it's proper files.

My ipad has been disabled, and says to plug it into itunes, i never synced it to itunes just used it wireless, and now i dont know how to get into it becuase i forgot my password

So, i put a password on my ipad, and i forgot it. I looked online of all the things to do, and ive tried, them, but i haven't synced my ipad to a computer... just used it wireless. So when, i try to plug it into itunes, it says it cant open it becuase, there is a password on the ipad, which i thought once i put it into itunes it would say to restore it. i need help badly!

If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
You may have to force iPad into Recovery Mode
http://support.apple.com/kb/ht1808

How to call external functions without a .DLL (just using a .H and .LIB file)?

Hello everyone,
actually I'm facing little difficulties on how to get an external function getting called from within CVI (Version 2009).
I was supplied with a .H file and a .LIB file to call an external function from within my CVI project. The .H file looks like this:
void exportedFunction(double *parameter);
As far as I know, the external function was written with MS Visual C++ 6.
So I tried to statically link to the extern al function like this:
- Add the .H file and the .LIB file to the CVI project
- #include the .H file where I needed to call the external function
- do the external function call
When building I get an unresolved external function call error from CVI so this seems not to be working.
I made some searches around and got up with two possible issues. Maybe one of you can help me get a bit further and get things working.
1) The "real" function code is located in the DLL file which was not delivered to me. Or is there a way to get things done (call external functions) just with a .H and a .LIB file (without any .DLL file included)?
2) The external function does not export according to "C-Style" rules. The function signature in the .H file shows no things like
extern "C" __declspec(dllexport) void __stdcall ...
Or maybe it's a combination of both issues (missing .DLL + wrong export style of function)?
I guess I could get around the wrong export style of the function when I manage to write a wrapper around the original function that actually uses C-Style exporting. But I guess I need the .DLL file for this try as well.
Thank you for your answers.
Best regards,
Bernd
Solved!
Go to Solution.

There is no need for the dllexport stuff. There is also the option for a static library without any DLL. But the 'extern "C"' is essential, because it forces the C++ compiler, which was probably used to compile the library , to use C calling convention.
If you can't ask the provider of the library to provide a version which was compiled using C calling convention the way to go is to write a wrapper with VC++6 around that library which reexports the functions using C calling convertion. Something like
extern "C" type0 myfunc1(type1 arg1, ...) {
return func1( arg1,...);
for every function , you need to use.
BTW. "unresolved symbol" is the linker error message, you can expect if you try to link C code against a library build with C++ calling convention.

Just used Migration Assistant and can't access files, get message

I just used Migration Assistant to move files (per directions on screen) from my older iMac to new G4 running 10.4.1. It seems as though everything has transferred, but when I try to open folders that have migrated, I get a window that says, "The folder could not be opened because you do not have sufficient access privileges".
Is there a way to obtain these privileges? Not sure how to proceed. If not, should I scrap everything and just drag and drop files? I had hoped to preserve all of my settings, address books, older email (using macmail program), etc...
Any help is greatly appreciated!

Hello christine:
Do you really mean OS X 10.4.1? The current level is now OS X 10.4.11.
Try running permission repair from disk utility. If that does not work, I think I would do an archive and install on the G4:
http://docs.info.apple.com/article.html?artnum=107120
Than would install a pristine OS X (which would need to be updated while preserving your files, programs, and settings.
Barry

No more bugs in C !!! just use PARASOFT solutions and forget about it all !

Similar Messages

Maybe you are looking for