Should I just keep Logic Pro and forget Pro X for now? ...
Should I just keep Logic Pro and forget Pro X for now?
Have Mavericks.
Have not been recording/using Logic since getting Mavericks, but getting ready for new projects.
How is old Logic Pro (not X) working with Mavericks? And X?
Are the upgrades in X worth the hassels I'm reading about on this forum?
Lena
As long as you have Logic 9.1.8 it will run fine under Mavericks. If there is no impending need to go to Logic X then don't bother. Updating for the sake of it when everything is working ok is not something I do. I only went to logic 9 from 8 about 7 months ago. Had the box install of 9 for a couple of years before moving to it because I had no need.
If you do decide to go to Logic X make sure you have 64bit versions of any 3rd party plug-ins.
There are some good features in Logic X but do you need them and do you need to move?
Similar Messages
-
My hard drive crashed on my Mac Book Pro and I just had it replaced yesterday. After restoring my data, Safari will not open. The error message I continue to receive is "Safari quit unexpectedly" Should I just delete the application and download a new one?
http://swcdn.apple.com/content/downloads/37/23/041-5058/lr5tynbldi18zcrqo8a8uq88 rnjushqliu/Safari6Lion.pkg
Here you go..... -
I can't get rid of the message, n error occurred with the publication of album. It just keep coming back, and can't move around in IPhoto.
Okay, folks, after a 3 1/2 hour phone call with a (very patient) telephone support person at Blackberry, here's what I learned.
You can check your USB drivers this way:
Plug in your phone into your USB drive. Assuming your Blackberry is "seen" by your computer...
Go into the Device Manager on your computer (control panel)
Expand the Universal Serial Bus controllers item on the bottom of the list
Right-click on BlackBerry Smartphone and choose Properties
Click on the Driver tab
Click on the Driver Details button
You should see one driver. I saw two. The one the BlackBerry likes is the RimUsb one.
So here's what NOT to do: We tossed the entire driver that was the "extra". This effectively made using my mouse and keyboard impossible, as they are USB, and sent my poor husband into the basement to find a million-year-old keyboard (and then a mouse) with the old fashioned kind of connectors (PS2). Bleh. Don't do that.
Here's what I did that worked (not saything this will work for you -- this modifies the Registry so better do a system backup with that backup and restore if you're nervous about this sort of thing):
From the start menu, choose run, and type regedit to get into the Registry editor.
Follow this file path: Computer, HKEY_LOCAL_MACHINE, SYSTEM, CurrentControlSet, Control, Class
Click on: {36FCE60-C465-11CF-8056-4445535400000}
If there's an item on the right called "UpperFilters", delete it. (see pictures)
Hope this helps someone.
Karin
First pic: shows "before"
Second pic: shows full file path and "after" -
I just bought a new macbook pro and my CS6 migrated, but now when I open existing documents, it launches a free trial version. There doesn't appear to be a way to enter my serial number or communicate that I simply have a new computer. HELP! There is no customer support for this. I can't believe what a poor service company Adobe is!!
The problem was that you migrated CS6. Unfortunately, migration doesn't work because it doesn't move all the files.
First, you'll need to use the Adobe Cleaner Tool to remove the components that were installed:
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Second, you should install a clean copy of CS6. Here is a link:
Other downloads -
The power button on my iPad mini is stuck in so iPad just keeps turning on and off
The power button on my iPad mini is stuck in so iPad just keeps turning on and off! How much would it cost to fix?
Hey Tommy_mccloud!
I have a link for you that can help you find the answer to that question:
Apple - Support - Service Answer Center
http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipad
Take care, and thanks for visiting the Apple Support Communities.
-Braden -
How do I eliminate this glitch? Music spontaneously starts, stops, stutters at random and I'm not even using that app. Repeated attempts to pause the song and close the app have no affect. Just keeps popping on and off randomly no matter what I'm doing at the time. I tried double-clicking the Home button which brings up all of the active apps, touched and held the Music icon until all the icons started wiggling, tapped the Close icon in the upper left corner of the Music app to close the app completely, but the app is still open and still randomly stuttering. I did notice that the play button icon flashes in the upper right corner of the screen when this happens and it appears and disappears in concurrence with the Music app stuttering. When the music starts, the icon appears and when it stops, the icon disappears again. When the music stutters on and off, the icon appears and disappears rapidly and in sync with that random glitch. This just started today for no apparent reason. I turned the iPad off, waited 30 seconds and turned it back on. As soon as it was finished starting up, the same music glitch began again immediately. I'm using iOS 6.1.3.
Well, no one seems to have any answers or ideas for me, I'll update what I've been able to accomplish.
I reloaded all 14 disks in the time frame of watching Lord of the Rings on Fri. nite.
Funny thing is, the first disk pulled the info from the online store! Hooray!
Wait-then all the next 13 could find no information online...what the heck is up with that? So I MANUALLY assign each disk a new track # to co-inside with each disk, spent about 2 hours doing that.
But still, itunes tells me my playlist is too large, there's not enough space on the ipod. so I unchecked 1 1/2 disks (I'd listen to 1/2 of disk 1 previously) and voila! there's my ipod full of my book. Finally. But what a lot of bother just to keep things in order! -
HT3180 my apple tv light just keeps on flashing, and i can't restart it, any idea's
my apple tv light just keeps on flashing, and i can't restart it, any idea's
Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device) -
Just installed logic studio and its not compatible with mac os x
Just installed logic studio and cant open logic window message displayed says version not compatible with mac OS X
You need to go to software update (apple logo/software update)
Let it update and youll be fine ^^ -
Hi guys , I have an iPhone 4s on 02 unlimited internet however every time i try to turn my personal hotspot on it just keeps on loading and i can't click on it.
I have tried reseting network settings but it just keeps on loading. I want to connect my ipad 3 to it.Hi guys. i have worked it out but i go to
Settings - General - Network - Then - It goes " Set Up Personal Hotspot " So click on it then it transfers me to the o2 website for help? How do you set it up? Once you go to the website it just says support questions etc. -
When I try to start my Garageband 6.05,I get a repetitive message that the core audio midi will not start. If I choose to ignore it, report it or reopen it, it just keeps coming up and garage will not load or start up? Any suggestions? THanks
I'm just guessing at this point, but I suspect that you have installed a midi driver on your computer for some external device, and, since GarageBand's midi capabilities are limited in some ways, chances are your audio/midi driver is asking GarageBand to do something more than it's made to do, causing core audio's midi function to crash.
If that's the case, you might want to try adjusting your midi device's driver settings, or uninstalling your midi device's driver, and then see if GarageBand starts up normally without it. -
Installing extensions and little circles just keeps going round and round, Help?
When I try to install new extensions, the little circle just keeps on going and the extension doesn't install.
When I go to extensions through the window>Extensions, it says there are three but only two work, onOne Software, which is installed on my machine, is empty.
When advised to download the Adobe Support Adviser, I follow the link to the page, only to be told that Adobe doesn't support this anymore.
Why can't I install any of the extension that I want and where are the onOne Software extensions?Please provide more details. Windows or Mac? Which version of Extension Manager (CS6, CC, 6.0.8, 7.2.1, ...)? Could you provide the download link of the extension if possible?
-
My Mac crashed today for the first time in the seven years I have owned it. I was working in Photoshop. It had been getting slower and slower in Photoshop. Now I can't start the computer at all. Using the Installer CD, I can't get through to use the Disk Utility to try to fix it. The computer gets bogged down in disk utility "gathering disk information." I can't get past this to reach the first aid tab. The little icon just keeps going round and round. Any advice would be much appreciated. Thanks.
You may have had a hard drive failure. Have you been hearing any unusual sounds? Have you been getting messages about a full hard drive?
Will it boot in Safe Mode? See What is Safe Boot, Safe Mode? (Mac OS X)
http://docs.info.apple.com/article.html?artnum=107392 Takes a while to run, but it usually "fixes" problems.
Resolve startup issues and perform disk maintenance with Disk Utility and fsck
http://docs.info.apple.com/article.html?artnum=106214
Cheers, Tom -
These ATI cards 9500 Pro and 9700 Pro ok for MSI K8N Neo2 Platinum and winchester cpu? Compatible?
Looking at grabbing a used ATI 9500 Pro or used 9700 Pro AGP card for my MSI Neo2 Plat since I can't use my Matrox G400.
Any problems using either of the above cards? I don't play a huge amount of 3D games so I'm not going to grab a 9800 Pro or XT or 6600GT. A 9500 or 9700 Pro would allow me to play the newer games at reasonable resolutions. Just want to make sure they are compatible.
thanxOk guys, thanx for the feedback. I missed the 9500 Pro sale, so maybe its for the better. If I'm going to try a bit of 3D gaming, I may aswell get a little bit better card. So here is my question for you folks:
For my MSI K8N Neo2 and AMD64 3000+ system, I want a card that will have good 2D output and good DVD playback. I want to try some 3D games, but don't want to have the minimum. I was looking at used 9500 Pro's and the 9600 XT but I've come across a used 9700 Pro and a 9800 Pro and 9800 Pro with r360 core (almost a 9800XT). So if I get a 9700 Pro, what will I be able to play smoothly at what settings and what will I be unable to play. Ultimately, I may play mostly on my projector at 858 x 484, so maybe the cards don't matter too much. If I don't play 3D games much after a while, I'll probably downgrade, but I want to give it a try. I can't afford a new 9800 Pro/XT or 6600GT.
Used cards I'm deciding between. Have to act fast.
9700 Pro $170 CAD or 9800Pro $210 CAD or 9800 with r360 core $230. Price differences between the cards is as you see there.
thanx in advance for any feedback, -
I have purchased Adobe XI Pro and created a form for entering bowling scores to submit to newspaper for my high school team. I can not figure out how to get pdf's into my documents folder on my iPad so that I can access the files in bowling alleys where I do not have a Wi-Fi connections. I need to be able access files without going to acrobat.com. Help!!!@
Post the PDF files to a web site. The browse to them in Safari on the iPad. When you Open the files specify the Open to occur in Adobe Reader. Then you can have/Save them in your Documents folder on the iPad. An iPad has limited access to files otherwise.
-
Font Issue in Acrobat 9 pro and X pro
Fonts are not displaying properly after selecting the text with Touc-up tool in Acrobat 9 pro and X pro how to solve this issue?
When Acrobat X installs it will remove an Acrobat 9 install.
Suggest you Deactivate then uninstall Acrobat 9 before installing Acrobat X.
May want to root about to locate that Acrobat 9 CD first.
As the preponderance of resources in Adobe's "Education" space deal with use of Acrobat X you may be better off in the long run by working out of and learning "X".
http://www.adobe.com/education.html
Be well...
Maybe you are looking for
-
Help!!!!!!!!!Can't connect to Itunes store after 7.5 itunes update!!!!!!!!!
Recently updated to itunes 7.5. States itunes store connection has timed out. Prior to this, had no problems connecting to itunes store. Since the update wont connect. I have tried everything. Here is my diagnostic readings. Can anyone help??????????
-
Hi Create PO > confirmation.Here we able to see document name Description: Here we able to document name as blank ,wot the document name is?? In R/3 we have document types ( mat and a/c), in my knowledge dont have document name. Please guide me Thank
-
Fetching reversal document Created using FB60
hi All, I have created an invoice using FB60 and reversed the same which is getting stored in RBKP table i have an existing code which returns the invoice reversed using created using mir0 the select query is as below. SELECT lifnr xblnr bldat cputm
-
Product category transfer via OPI.
Hi SRM people, Does anyone knows if there is a way to transfer the product category choosed by the vendor in ros_prescreen, when the transfer via OPI catalogue is used in Manage Business Partners, to create a new bp in SRM version 4.0. Thanks Sid
-
Skype call not connecting between 2 Windows 8.1 ma...
I have two Windows 8.1 computers, both bought brand new in August. We can not get them to connect to each other at ALL. Both accounts were converted from Skype name to MS Accounts. We have been having to switch to competing products to talk 90%+ of t