No. of Records in ResultSet using RS.getFetchSize()

Trying to calculate the total number of records the the resultset that i'm calling however when i use RS.getFetchSize() i consistently get 10 as the result even when there are more, anyone any ideas?

I'm not really sure what FetchSize is, however from a quick read of the JavaDocs for ResultSet I found this:
"Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for this ResultSet object. If the fetch size specified is zero, the JDBC driver ignores the value and is free to make its own best guess as to what the fetch size should be. The default value is set by the Statement object that created the result set. The fetch size may be changed at any time."
this was for the setFetchSize() method (just having a set method suggests to me that it is not the number of rows). It seems to me that fetchSize is not the number of results returned, but instead the number of rows the driver should try to get at one time.

Similar Messages

How can I use the USRP to record a signal using its two RX port simultaneously?

Hi.
I am trying to record a signal using two horn antenna. The reason I need two antenna is to cover the wide frequency range (DC-6GHz). one antenna is covering DC-300MHz and the other one covers 300MHz-6GHz. So I need to use two RX port of USRP at the same time to record the signal. I have two questions:
1. Does any USRP in the market capable of covering this range of frequency?
2. Is it possible to use both RX port at the same time to record signals as I described? If not, how can make that happen?
P.S. I have two NI2920 USRPs and two N210 USRPs in my lab.
Thanks in advance for your time.
Sam.
Solved!
Go to Solution.

Hi Sam,
To answer your first question the USRPs that you have cannot reach the frequency range that you want. There is not a USRP, to my knowledge, that can reach this range in one device.
Also note that you cannot use two RX sessions for two different ports at the same time using LabVIEW and the USRP driver. If you want to use both RX lines you will have to run one session with one line, end the session, and then start a different session for your second RX line.
Noah | Applications Engineer | National Instruments

How to select records in ALV using FM

Hi guys,
How to select records in ALV using FM. Not the OO method. Thx in advance!
Kun

hI
by using REUSE_ALV_FIELDCATALOUG_MERGE. Iys fill field catalouge table as per internal table description. Then use REUSE_ALV_GRID_DISPLAY for display ALV REPORT.
**Please reward suitable points***
With Regards
Navin Khedikar

When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data.

When you download iTunes material, does iTunes record the IP used where it is being downloaded to? I am trying to track a lost/missing IPOD Touch and want to know if they have that data. It was left on a small street and someone has found it and has been hacking into my account by resetting my password. They took about 41+ dollars from my account. I am hoping the IP it was connecting with to download to it was tracked and that I can get that information to figure out where it is located.

No. From the second link below.
"Apple does not have a process to track or flag lost or stolen product
- If you previously turned on the FIndMyiPod feature and location service is on, and wifi is on and connected go to iCloud, sign in, and go to FindMyiPhone. It the iPod has been restored it will never show up.
- Report to police and change the passwords for all accounts used on the iPod.
- Apple will not help
Reporting a lost or stolen Apple product

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, the cut the recording into songs using one audio file folder. When working on an individual song, I can't access the sampler. I get the message "nothing to display"

I'm running logic pro 8.0.2 on Leopard 10.5.8. I've recorded an evening of live music, then cut the recording into songs using one audio file folder ad multiple song files. When working on an individual song, I can't access the sampler. I get the message "nothing to display" or "no region or audio file selected" After much research on the web, I believe this is a permanent bug. Does anyone have a good work-around for this type of work. We record live 16T band rehearsals constantly and would love to be able to break individual songs out of the large file and be able to use the sampler. Thanks in advance for your ideas! Cheers.

Another thing - if I copy one of the tracks to another track, then the sample editor works on the copied track. I don't want to have to copy 16 tracks to new tracks to be able to use the sample editor on a project. Thanks again.

Recording from DAT using SB Conn

Long time ago I have recorded DAT tapes using my Denon DTR 2000. I used digital recording from CD for that.Now I am considering using SB Connect for burning CD's (DAT?is such an old stuff?don't want to loose my recordings). Anyone has tried anything like that? Any problem with SCMS?

BES,
Which input on the back of the card did you use? The Line-in is the stereo input. Ensure that you have the cable fully inserted on both ends. Also check with another source such as a CD player or personal radio. This will tell you if the tape player may be sending only the left, or if the input jack is failing.
Daniel

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen.

I have a HP610-1150f. not recording sound when using webcam in touchsmart screen. I have looked thru this forum and I don't see anyone else having this problem. (unless I missed it). The recording works in Notes, but not when I open Webcam and try to record from there. video recording works fine. I have had this computer less than a month and I am having a couple of problems with it. Still loving it though.

Hello schae731: Welcom to HP Forum and your new Touchsmart. You need to contact HP Direct Support on line your Touchsmart comes with one year warranty so use it why you can. You can contact them through your HP Support Assistant or on line. They will help you with trouble shoot the web-cam software. Goto your computers model and make support web-site. They will also help you with your other issues as well.
I am using the older version software so I won't be much help. Please repost if HP direct support is un able to help you resolve your issues. While you are chatting with them have them check out your computer do it before your 1 year warranty expires. Have fun with your new computer.

Recording my voice using MacBookAir

Is there a possibility to record my voice using my MacBookAir as an mp3 and after that listening to it on my Mac or on Ipod over and over (looping)?
Thanks

Thank you and..how do I create a podcast using my MacBookAir?..

How to create updateable resultset using sql with "order by"

Dear all,
I'm using the Derby database to hold a table of stock prices. After the table is populated, I want to do some calculations and store the result in a column.
I get the resultset using the following code
Statement stmt = con.createStatement(ResultSet.TYPE_SCROLL_INSENSITIVE, ResultSet.CONCUR_UPDATABLE); ResultSet rs = stmt.executeQuery(select history_id, value, days from history where ticker = '" + ticker + "' order by value_date"); {code} When I then try to update the "days" field, I get an SQLException telling me that the resultset is not updatable. However, if I remove the "order by" clause, I am able to update the data, but then my algorithm does not work as I need to traverse the data in a specific order. The quesion is: how do I create an updatable resultset using a sql-statement with an order by clause? Kind regards Karl Martin Lund

jschell wrote:
Seems rather obvious to me that the exception specifically tells you that you can't do that.OP: I would guess it's because ORDER BY forces the database to read all the result rows into a temporary area, sort them, and then return them from this temporary area, as opposed to streaming the results. The extra step probably makes updateable result sets more difficult (or maybe not possible), so they opted not to do it.

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 also how we can insert,update,delete records in list using ECMA script.

As i am fresher Please share the doc of ECMA script using java script in SharePoint 2013 step by step also how we can insert,update,delete records in list using ECMA script.
Thanks and Regards, Rangnath Mali

Hi,
According to your post, my understanding is that you want to use JavaScript to work with SharePoint list.
To create list items, we can create a ListItemCreationInformation object, set its properties, and pass it as parameter to the addItem(parameters) function
of the List object.
To set list item properties, we can use a column indexer to make an assignment, and call the update() function so that changes will take effect when you callexecuteQueryAsync(succeededCallback,
failedCallback).
And to delete a list item, call the deleteObject() function on the object.
There is an MSDN article about the details steps of this topic, you can have a look at it.
How to: Create, Update, and Delete List Items Using JavaScript
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Video Pixelation occurs while recording the video using flash player

Hello,
I am recording the video using flash player 9 ( using the
flash media server 2.0 on the back end). Everything used to work
fine in the past. The quality of the flv video was good. Now
suddently, I have started seeing the pixelation in the recorded
video (very poor video quality). Nothing has been changed in the
code. However on the server side, I am not very sure if there is
any windows update has taken place and have caused the problem with
the codec on server.
However my understanding is that when we record the video
then flash player use its own codec not the flash media server.
Can any one help me on how I can get rid of pixelation
issues?
Thanks for your help.
Best Regards
Pradeep

Hello Melissa,
I might not be understanding the question right, but if you
are using Flash
Player 6, and the Flash Player 6 video player component, you
can resize the
video by resizing the component on the stage (just drag and
make it larger).
Let me know if that works for you.
Jesse H.
Adobe Community Expert
My site:
http://www.jharding.com
Free Blog Radio:
http://www.tornadostream.com
> I'm streaming video using Flash Player 6. The problem I
am having is
> that the
> video will only play at a super small size, something
like 180 x 60
> (that's a
> guess). Is there a way to play the video at the 320
width that I
> redered it as?
> I'm using Flash Player 6 because some code that came
with my
> purchased Flash
> Template does not work unless it's published to Flash
Plaey 6.
> Thanks in advance!

[HELP] How to records user who use SQLPlus or SQL editor?

Dear Gurus,
Is onyone know how to record user who use SQLplus or any SQL editor?
for instance...
user1 using SQLplus on monday august 9.30.21 PM...and I have table which record this for audit user.
Or..
Can I block user who connect to oracle using SQLPlus?
If anyone know how to do this..please inform me...
Thanks and Regards
Erie

You can enable Auditing (AUDIT_TRAIL) and audit at the Session Level to record Logon and Log off of a required user. This can be enabled to be recorded in the audit table or operation system file. You can also audit user statements etc.
For example, to enable auditing connect for user UGONIC
SQL>audit connect by UGONIC;
TO disable it
SQL>noaudit connect by UGONIC;
Check in the SQL Reference for the AUDIT statement and requirements.
If you do not want the user to connect at all via SQL*Plus, you can use PRODUCT_USER_PROFILE to disable a users access to SQL*Plus or at the lower level, disable specified SQL*Plus and SQL commands for the user. You need to run the PUPBLD.SQL script as system user (if not run yet) and add records to it as required.
Example: After running PUPBLD.SQL. This entry stops the user UGONIC from using the drop command at the backend in SQL*Plus.
INSERT into product_user_profile (product,userid,attribute,char_value,date_value)
values('SQL*Plus','UGONIC','DROP','DISABLED',NULL);
Note that if a user is already connected by the profile entry, it is not activated on that session, but on subsequent logons. Again read the requied security documentations for this.
For both auditing, you need to set the required database intialisation parameters and know where to get the audit records (in tables, views or OS file). For instance, when using tables, you maintain and query tables like audit$ to view the logs. When using OS type logging, it is recorded on the path specified in the AUDIT_FILE_DEST init parameter (In Windows, it is logged in the Windows Event and you can view it from the event viewer).

How can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

how can i request the actual time code of digital video recorder, i am using RS232 interface for asking actual time code of digital video recording

If you have an RS-232 interface to the digital video recorder, it may be that you can send a command to the video recorder in order to get the time code sent back to your application - you would then read this as a string and then incorporate this data into your program.
The best source of help will be any documentation you have relating to the serial (RS-232) interface with the digital video recorder. This documentation should have commands that you can send to the recorder and expected response strings that you should get back from the device. This task should be straightforward but can often be frustrating without documentation about the video recorder. This will not be something that you can "guess" - past experience in writing serial communication ap
plications has shown that a good manual is your best friend.
Failing this if you have any source code for example programs that have already been written to communicate with the recorder, you might be able to extract the relevant ASCII strings and use them within your application. This is true whether you are using LabVIEW or a text-based language.
Jeremy

Quicktime won't let me select an area to record , I'm using quicktime 10.0

Quicktime won’t let me select an area to record , I’m using quicktime 10.0

QuickTime X for Snow Leopard can only record the entire display.
Lion, Mountain Lion, Mavericks and Yosemite each have a newer version of QuickTime X and the most current version is 10.4.

Customer Order Records in Java using dataBase

hi can u help me on how to make a Customer Order Records in Java using DataBase?
may i know the code in the JCreator?
or the Syntaxfor this program..
Hope you will help me,,thanks a lot,,

Well, being that you're offering the maximum dukes, and you're cute, just sit back and relax while one of us does your homework for you. It's going to be a little difficult though, we need to don our mindreading caps too to figure out the exact requirements since you didn't post it.

No. of Records in ResultSet using RS.getFetchSize()

Similar Messages

Maybe you are looking for