No Password account/Different URL

How do you in Oracle9iaswe create an account that does not need a password? How to I create a different URL address?
I have an application that gives the road report and we want everyone to be able to access the information. I would also like to give it an address of something like http://go.domainname.com instead of http://domainname.com/ptg/rm.

Perhaps you can implement the automatic logon. Check it out at:
http://otn.oracle.com/sample_code/products/iaswe/content.html
I have a question for you: do you have an answer on my question about implementing a log off procedure (placed on the 31st of January)?

Similar Messages

How to assign different passwords for different resource accounts

Hi everyone,
We have a situation where we have users with two resource accounts. They have different passwords with different lengths.We are using Flat file active Sync adapter to create users in both resources and there we are setting passwor.password field. But we need to set different passwords to every resource account and it is obviosly it can not be done with password.password field. We tried e password view before provisioning where we chekout the user and set the follwing parameters:
<set name='userview.resourceAccounts.selectAll'>
<s>false</s>
</set>
<set name='userview.resourceAccounts.currentResourceAccounts[RES1].selected'>
<s>true</s>
</set>
<set name='userview.resourceAccounts.password'>
<ref>accountId</ref>
</set>
<set name='userview.resourceAccounts.confirmPassword'>
<ref>accountId</ref>
</set>
But it did not worked. So is there a way to set different passwords to different accounts in SUN IDM?
Oh and forgot to mention we are using Sun Idm 8.1 patch 9.
Best regards.

I actually managed to change the required password but i copied this in Provision externeal Resources.
<Action id='1' name='Check out password view' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkoutView'/>
<Argument name='type' value='Password'/>
<Argument name='id' value='$(accountId)'/>
<Argument name='authorized' value='true'/>
<Argument name='subject' value='Configurator'/>
<Argument name='TargetResources'>
<List>
<String>RES1</String>
</List>
</Argument>
<Return from='view' to='userview'/>
</Action>
<Action id='2' name='reset password'>
<expression>
<block name='reset password' trace='true'>
<set name='userview.resourceAccounts.selectAll'>
<s>false</s>
</set>
<set name='userview.resourceAccounts.currentResourceAccounts[RES1].selected'>
<s>true</s>
</set>
<set name='userview.resourceAccounts.password'>
<ref>accountId</ref>
</set>
<set name='userview.resourceAccounts.confirmPassword'>
<ref>accountId</ref>
</set>
</block>
</expression>
</Action>
<Action id='3' name='check in password view' application='com.waveset.session.WorkflowServices'>
<Argument name='op' value='checkinView'/>
<Argument name='view' value='$(userview)'/>
<Argument name='authorized' value='true'/>
<Argument name='subject' value='Configurator'/>
</Action>

HT5624 for some reason my icloud password is different to my apple id can I make them the same ?

My icloud password is different to my normal apple password I use for itunes can I change it to be the same, have ipone 4s just got ipad air having problems getting old photos from phone to pad ?

Of course you can make your passwords of different accounts the same by just changing it here: www.appleid.apple.com . Just click on "Manage Account" sign in and then change your password.

Oracle Access Manager 11gR2 Account Lockout URL

I have question on OAM and OIM Integration LOCKOUT URL.
Oracle 11gR2 documentation used is Introduction - 11g Release 2 (11.1.2.1.0)
Section 1.5.3.5 Account Lock and Unlock refers to account lockout url
4. The user's unsuccessful login attempts exceed the limit specified by the policy. Access Manager locks the user account and redirects the user to the Access Manager Account Lockout URL, which displays help desk contact information.
Where can we setup Access Manager Account Lockout URL in 11gR2?

Try specifying Account Lockout URL in oam-config.xml "AccountLockedURL" attribute. I am not sure what exact values should be set for other attributes mentioned in oam-config.xml (password policy related section) as some of them are related to OIM-OAM integration. Do you plan to integrate OIM-OAM in your environment

I publish identical podcasts under different URLs. How can I combine them into one?

Over the years, my URL has changed a couple of times. I didn't know (until recently) how to notify iTunes that the podcast location and URL had changed. So, now after a number of years, I have three identical podcasts, each with different a different URL and a different list of subscribers. I have them pointing to the same source file now, but I would love to combine the podcasts into one so that the subscribers from each are merged together and they don't show up as three possible subscriptions in iTunes. Is this possible?

You can't merge them: all you can do is to ask to have two of them deleted, and of course if you do that you will lose any ratings. However existing subscribers should all be using the same feed if the three Store pages are all using the same feed, and so removing two of them won't have any effect on subscribers.
The method of getting a podcast removed is detailed here:
http://www.apple.com/itunes/podcasts/specs.html#removing
When you explain why you want each one of the two you choose removed, specifically say that the same feed is in use in three places, so you can't use the 'itunes:block' tag (because this would block all three).

How can I send to a different URL link than what the text states in Acrobat?

Hi there
I know how to create URL links in my document using Acrobat but
How can I create a link that goes to a different URL desintation other than the one the text states?
For example
the text states
www.aaaaa.com
and I want it to state this,
but I want the link to direct to
www.aaaaa.com/abcdefghijkl
I dont want to have to create a link object, I want it to stay as text?
Is this even possible?
Any advise?
Thanks

try67 wrote:
Actually, it is possible to specify your own tooltip text, if you use a
button instead of a link.
You just set the button's action to "Open a weblink" and it will act the
same as a link, but you'll have more control over how it looks and behaves.
Hi there
I cant see the term "Open a weblink". Can you advise please?
Also then how do you change the "Tooltip text" please?

How to link web app item to different URL other than detail page

Hi, this is probably a bit of a stupid question but I can't find the answer anywhere. On my site, I have projects set up as web apps--I want the customer to be able to click on the title or image for the web app and for it to link to a PDF or blog page, NOT the detail view.
So I want the app title and image to link to a different URL, not detail view.
Here's the page in question, if that helps: http://sherrihaab.businesscatalyst.com/projects
Thanks in advance for any help.

{tag_name_nolink} - Will make the title with no link wrapped around it
{tag_yourimagefield_value} - Will give you the raw source of the file location
You can then form your own image html and links wrapping this and the web app item name text.
To form the link source to go to - create a text custom field and just type or copy and paste a url into that field.

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be sent

Family of 5, all use the same Apple ID/Password/Account. In settings/messages/send>recieve you can "check" my email and up to three phone numbers. Essentially allowing all iMessages to be copied to shared account numbers. Please help me figure out how to prevent my children from recieving my text correspondence.

On the devices for the members of your family that you DO NOT want to see your iMessagees, go to
Settings App
Messages
Send and Receive
You should see a list of available contacts which would make messages appear. Make certain that each family member has their own individual contact and NOT the same one that you use. I find it useful to have each family member have their own icloud email and use that for iMessaging my kids. My kids do not have iPhones, but if yours do, their phone number should be listed as well. For iPads and iTouches, use icloud email addresses. If you need to send a message to all 3 kids, say, you can just add all three emails to the To box on your iMessage.
Hope that makes sense.

I am unable to update my apps as for different app updates it ask password for different apple IDs

I am unable to update my apps as for different app updates it ask password for different apple IDs. About these many IDs i am unaware.

You only can update those Apps, if you know the Passwords from the AppleIDs, which were used for purchase.
If you´re unable to enter these Passwords you can´t update them.
You can delete those Apps from your device and purchase & download them again with your own known AppleID.
There is no other Way to get them updated. Because you are not the owner of those Apps.

TS2446 After resetting my password, account is still disabled

I'm having trouble signing in to the app store, After resetting my password, account is still disabled. Any other options?

Contact itunes support

No redirection to different url upon http connections limit exceeded

Hi,
As of Standalone OC4j 10.1.2, if you want messages to be redirected to a different URL when the maximum connections limit is reached, you would include the HTTP redirect URL to max-http-connections tag inside server.xml.
<max-http-connections max-connections-queue-timeout="120" socket-backlog="50"
value="100">http://optional.redirect.url/page.jsp</max-http-connections>
I have a standalone OC4j 10.1.3, and would like to be able to redirect to different URL when maximum connections limit is reached but the above max-http-connections does not work and I am not redirected to different URL when maximum connectionns limit is reached. I read user guide of OC4j 10.1.3 and there is no mentioning of max-http-connections at all. In there, they talk about limiting concurrency via http thread pool but there is no discussion as to the mechanism of redirecting users to a different URL where I can display a user friendly message to say "Server is busy, please try again later..." instead of browser display a message "Page cannot be displayed"..
Please advice,
Thanks

Any thoughts on above issue ? please help.
thanks
Sam

How do I unhide the URL window/field that allows me to directly enter a different URL without using the Search Window/field?

I need to unhide the window or field that allows me to DIRECTLY enter a different URL. I do not want to use the search engine. I want to manually enter the URL of my choice and go DIRECTLY there.
So, how do I unhide the URL window?

It is still there at the left most part part of the address bar, but you have to press and hold the trackpad to use it.
Click the Share (arrow out of the box) button to add bookmark.

Why two different URLS lead to same thread?

My action engine nugget here
http://forums.ni.com/ni/board/message?board.id=170&message.id=240328#M240328
showed up at the botom of the LV page as one ot the most Kudoed and when I hit that link it takes me to here
http://forums.ni.com/ni/board/message?message.uid=503801#U503801
THey both seem to be the same thread but different URLs. Why?
Just curious*,
Ben
* Don't expect me stop asking question now. It is way to late for that to help.
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction
Solved!
Go to Solution.

Ben wrote:
http://forums.ni.com/ni/board/message?board.id=170&message.id=240328#M240328
http://forums.ni.com/ni/board/message?message.uid=503801#U503801
THey both seem to be the same thread but different URLs. Why?
I would think that the forum is just a huge database of posts with a front end that formats the pages dynamically.
Apparently, a post can be addressed either from a global ID (URL#2) or from a board/boardID (URL#1). Same difference.
LabVIEW Champion . Do more with less code and in less time .

Creating a SVG Pie Chart With Different Portion Linking To Different URL

Is it possible to create a SVG pie chart in which different portion will point to different URL. on HTML DB version 1.5.1.00.12
For example i've tried something like this:
on page 20 i have a svg pie chart
select
'f?p=&APP_ID.:21:#APP_SESSION#::::P21_DD_SALESORG:'||region,region,code from demo_region;
i have a query in page 21 like this:
select country from demo_country where region= :P21_DD_SALESORG;
so when i click on a particular region on the pie chart on page 20 the value of item
P21_DD_SALESORG on 21 should be set.
but the value of P21_DD_SALESORG is always getting passed as NULL from the pie chart.
I've tried it on HTML DB version 1.5.1.00.12
Look for an early reply
Thanks & Regards,
Rupak
Message was edited by:
user445907

hi user445907--
your link column in your chart query seems to us the correct syntax, so i'd imagine the issue is with your data/query or the item name in question...
check the query and data: make sure your query returns valid values to be passed of to P21_DD_SALESORG. if so, you should see your links correctly formed as you hover your mouse over the individual slices. if your links look good then check your item names.
item names: if your links above look okay, then might you be setting the value of the incorrect item? please confirm that. after clicking a pie slice to get to page 21, check to see that P21_DD_SALESORG is correctly set by clicking the Session link in the developer toolbar.
basically, i'm suggesting that because your link column in your query looks okay, you'd want to see at what point the NULL value is being passed/set. try tracing things from the chart query over to page 21 (and try going backwards if you have to). if you can't find the disconnect, please feel free to set up an example on an instance, where i can take a look.
thanks,
raj

Unable to connect to Server at servername . enter a different URL and try again (only on client machine)

Hello All,
We are getting "Unable to connect to Server at <<servername>>. enter a different URL and try again" error, if we are trying to connect to report server in report builder.
This issue is appearing only on 2-3 client machines only. Rest on other client machines and server URL is working fine.
Please suggest
Thanks in Advanace
-Regards
-Kumud Vaish

I would suggest looking at what might be different between those clients and the others that work. Do they run the same antivirus version? Did they receive any recent updates (windows or AV)? Are they potentially on a different network
(sometimes a wireless network is configured to be different from the wired)? Are they getting any different group policies?
We've seen the antivirus web control block access before in my environment.

No Password account/Different URL

Similar Messages

Maybe you are looking for