No pick and send in File to file scenario

Dear XI Guru's,
Am a newbee in XI world i have done steps related to XI file to file scenario in my XI system. I have taken help from the following blog.
Step by Step Guide: XML File 2 XML File Scenario: Part I
Step by Step Guide: XML File 2 XML File Scenario: Part II
But my file is not getting picked from the sender folder as my receiver folder is empty always...
Can we put an XMl file instead of DAT file
Please help. where am i going wrong..........

Hi,
Did you configure the FTP server using this Blog:
Along came a File Adapter, Mr. 'FTP' and Rest of the Gang
if so check whether you have checked all the parameters for the path which you created.
also ensure that as mentioned the blog at the end
"Even though in your local machine you have the folder name as ftproot and the path say C:ftproot, in your file adapter you will refer the same as / . So if you have created subfolders like input and output, in the adapter configuration it would be refered to as /input or /output and not C:ftprootinput or C:ftprootoutput. "
IP address will be the IP address where you have configured the FTP server and not like C:/ftproot/Sender....... as you mentioned
Regards,
Nithiyanandam

Similar Messages

PI 7.1 scenario -- File to File , File to IDOC and IDoc to File Scenario

Hi All,
*I have PI 7.0 . I have in that File to File , File to IDOC and IDoc to File Scenarios*
File to File -- This scenario is working fine.
File to IDOC -- Setting done in PI 7.0 like SM59, IDXI, IDX2 and in R/3 like SALE (logical system)--- This scenario is working fine.
IDoc to File -- Seeting done in R/3 like SALE (Logical system, Distrubtion Model (Port, Partner Profile)) -- This scenario is working fine.
Now I need to move to PI 7.1 -- for File to File , File to IDOC and IDoc to File Scenarios.
Please let me know do I require to make any changes in Design and Configuration and settings in PI 7.1 and R/3 for above scenarios or it will work fine as it is already working for PI 7.0
If changes are required please let me know what changes to do for each scaenario and pls also send blogs for that.
Regards

>
Rickkk wrote:
> Hi,
>
> Idoc metadeta is updated through idx2?
>
> Regards
If there is no metadata maintained for an idoc type, the metadata for that idoc type gets loaded when an idoc of that type is received by PI for the first time. If you are looking at loading metadata of all idoc types before the first run, its really not required. Just make sure that the port is configured properly. Although, there is no harm in preloading the metadata using IDX2.
You need to use IDX2 mandatorily when the the metadata changes and the metadata in ECC and PI is different. In that case, you need to delete metadata for the changed IDoc type and then either you can update the metada through IDX2 or let the system take care of.

Best way to write objects in an xml and send the file?

hello all
i am making some objects, which i conver to xml using the XStream and then i am saving them to a file, call a function to send the file to a servant (basically i do this by sending bytes and this may be the problem). In the servant i take the data i write them to a file and then i read them again to make them objects...
i have the following code in the client
        XStream xstream = new XStream(new DomDriver());
        xstream.alias("Jobb", WorkflowFramework.Jobb.class);
     String xml = xstream.toXML(translation);
           FileWriter fw = new FileWriter("translation.xml");
           ObjectOutputStream out = xstream.createObjectOutputStream(fw);
           out.writeObject(new Jobb("ougk2", "Walnes",null));
           out.close();
           File file=new File("translation.xml");
           byte buffer[]=new byte[(int)file.length()];
           try {
                BufferedInputStream input=new BufferedInputStream(new FileInputStream("translation.xml"));
                input.read(buffer,0,buffer.length);
                input.close();
           } catch(Exception e) {
                  System.out.println("Error: "+e.getMessage());
                   e.printStackTrace();
           theRemoteObjRef.translationService(theCallbackObjectRef, buffer);i write the file and then i read it so as to have a buffer of bytes (there should be a better ways..)
the last line sends an objectRef (we dont care about that) and the file in bytes to a server (to be specific to a servant of a server)..
in the servant i do the following
public void translationService(TheCallbackInterface objRef, byte data[]){
          try{
                    File file = new File("translation2.xml");
                BufferedOutputStream output = new BufferedOutputStream(new FileOutputStream("translation2.xml"));
              output.write(data, 0, data.length);
              output.flush();
              output.close();
          } catch(Exception e) {
                    System.out.println("Error: " + e.getMessage());
                    e.printStackTrace();
           XStream xstream = new XStream(new DomDriver());
           try { // If an error occurs, go to the "catch" block
                FileReader fr2 = new FileReader("translation2.xml");
                ObjectInputStream in = xstream.createObjectInputStream(fr2);
                Jobb newJob = (Jobb)in.readObject();
               System.out.println(newJob.getObjServerRef());
               System.out.println(newJob.getForTranslation());
               System.out.println(newJob.getTranslated());
                }catch (Exception e) {
                     System.err.println("File input error"+e);
                Jobb testJob=new Jobb("ougka","mpougka","falalala");
                System.out.println(testJob.getObjServerRef());
                   System.out.println(testJob.getForTranslation());
                System.out.println(testJob.getTranslated());
the problem is that in the first group of System.out.println i get the error File input errorcom.thoughtworks.xstream.mapper.CannotResolveClassException: Jobb : Jobb
but the second group of printlns, prints the correct results...
do you know what is the problem? Why can i read the content of the file and get the objects from there?
do you have any suggestions of writing and reading the file in an another way or to send it by NOT using a bytes array?
do you have an alternative way of making the xml file?
many thanks!

Hi,
I would suggest to reconsider building of your document so that it doesn't contain duplicates if you don't need them. And it doesn't have much to do with DB XML then.
Also you could insert your document with duplicates and use XQuery Update facilities to delete undesirable nodes.
Vyacheslav

How to export data to .csv and send that file to folder using sql commands?

Really hoping someone can provide some code sample or point me in the right direction (with examples using sql).
I am using oracle 11g with plsql developer. My requirement is that the data retrieval should be automatic. That means when query a data in oracle table , the data should be convert into .csv file and then it should send that to some specific folder.
Example: Assume that student_sub1 table have all students subject1 data.when i write a query like select * from student_sub1 where student=1, the student1 data should convert into .csv file and then the .csv file should go to student1 folder.
Hence I am requesting you to suggest me how write a sql code to convert the data into .csv file and to create a folder to send that file using oracle.
Your inputs helps me alot.
Thanks in advance!!!!
Waiting for your replies.... Cheers

981145 wrote:
Really hoping someone can provide some code sample or point me in the right direction (with examples using sql).
I am using oracle 11g with plsql developer. My requirement is that the data retrieval should be automatic. That means when query a data in oracle table , the data should be convert into .csv file and then it should send that to some specific folder.
Example: Assume that student_sub1 table have all students subject1 data.when i write a query like select * from student_sub1 where student=1, the student1 data should convert into .csv file and then the .csv file should go to student1 folder.
Hence I am requesting you to suggest me how write a sql code to convert the data into .csv file and to create a folder to send that file using oracle.
Your inputs helps me alot.
Thanks in advance!!!!
Waiting for your replies.... CheersSET COLSEP ,
spool student1.csv
select * from student_sub1 where student=1;
spool off
How do I ask a question on the forums?
SQL and PL/SQL FAQ
Handle:     981145
Status Level:     Newbie
Registered:     Jan 10, 2013
Total Posts:     25
Total Questions:     10 (8 unresolved)
I extend my condolences to you since you rarely get answers to your questions here.

Bypassing SOA MANAGER , Consume a stateless Webservice and send Zip file

Hello,
I have question around consuming web service via ABAP program.The scenario is consume a operation of a web-service and get the information, based on this information put the data in flat files and send it back in another operation of this web-service. Due to way web-service is implemented I cannot generate proxy class and use SOA manager the reason is web-service is using complex data type
1) Is it possible to consume a web-service via ABAP program directly
I have explored the SAP documentation and came up with this link
Appendix C - SOAP Runtime for the SAP Web AS - SAP Library
Few Links I found are
Manual HTTP POST from ABAP
WebService 4.7 / WAS 620 XSTRING BASE 64
Using any of the above approaches can SAP program consume a web-service bypassing the SOA manager & send the zipped files in one of the operations.
Thank you

Appreciate if some one can answer the question above

Receive and Send XML files

I have a requirement, to receive XML files from a Vendor, process them and send them back an XML file.
What are the different way I can receive the files from the Vendor ?
They do not support File Transfer Protocol and They do not want to access any web-service that we create for them to post the XML's ?
What technology do I use to get the files, I was told we can use HTTP.
Please let me know
Thanks

Timo,
Thanks for your reply, the technology stack we are using is Oracle Middleware,
The process of uploading the documents should be automatic , so I need to give the Vendor an URL, where they can post the XML documents.
If I use a web-service, will that be having any URL for the vendor to post ? and I suppose I have to make that web-service open in the internet. ?

HOW TO TEST SOAP SENDER TO FILE SCENARIO

Hi gurus,
I have designed and configured SOAP to file scenario.
I have used http://xyz namespace in design time.
I have created two business systems for this sceanrio.
I have downloaded and installed soap client on my system.
When I open this soap client it is asking
1)URL
2)load request from
3)In the editor request tab what should i give.
4)wht is the response tab here
I want to send data to XI from SOAP and then to file.
Please help how to give data and how to get the data format to give in the requst editor?
Points will B rewarded
Regards
Sreeni

Hi,
You can use a SOAP client like Altova XML spy for posting a message to XI.
The best way to do this is to use the generated wsdl for creating a soap request.
once the wsdl file is picked up by the soap client, it automatically generates the url.
now the response which comes back to the soap client is usually a http status code of successful post. (since u r performing an async scenario)
also ensure u use the j2ee port while genrating the wsdl using the "Create Webservice" option in Int Directory.
Also chk the link for the weblog on sender soap scenario.
/people/siva.maranani/blog/2005/03/01/testing-xi-exposed-web-services
Hope this helps.
Award points if found helpful
Cheers!!
Sidharth

Pass through scenario in SAP PI with no mapping for File to IDoc and Idoc to file scenarios

Hi Experts,
Can i have step by step process in SAP PI for pass through scenario with no mapping in case of file to Idoc and Idoc to file both cases please.
What objects i can skip.
My PI system is 7.3 dual stack.
I have seen below blogs, still its confusing to me.
When and how to create an scenario in SAP PI without mapping objects.
Pass Through Scenario with no Mapping in PI 7.1
Appreciate your help on this.
Regards,
Mohan.

Hi Mohan
In pass thru interface you don't need to create any ESR objects, only ID objects are required.
Just Create a Receiver Determination and Receiver Agreement for your scenario (no need for Interface Det. and Sender Agreement).
Specify the IDOC in the Sender Interface and namespace as urn:sap-com:document:sap:idoc:messages
Or instead of creating objects manually, Run the wizard with Idoc name/namespace in sender/receiver interface
Regards
Osman

File to Idoc Scenario and Idoc to File Scenario's

Hi Friends ,
This is Shalini Shah,
Please give me the details of how many busines sytems required in File to Idoc Scenario and Idoc to File sceanrio's.
In business system , what is the name of Integration server(this name is related to XI ot Third Party)
Please give me the full details of these two scenarios from Scratch.
Thanks in Advance.
Regards,
Shalini Shah.

Hi
These r few links which gives u complete scenarios...
for idoc to file:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e07dcaa0-a92b-2a10-3a96-b3d942bd1539
for file to idoc:
part1
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC&
part2
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part2+(Configuration)&
part 3
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/profile/2007/05/11/fileToIDOC-Part3(StepsrequiredinXIandR3)&
This link is also good:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Troubleshooting File-to-IDOC Scenario in XI.
/people/venugopalarao.immadisetty/blog/2007/01/24/troubleshooting-file-to-idoc-scenario-in-xi
kindly rewards points if helpful.

Why can't I add email and send a file.

I have a file to send and I can't type in the email address on the bar where it says To... Also, when I click address book blue icon I'm rerouted to buy the monthly subscription. I've emailed small things before. What am I missing here?

When you click the Share icon and choose E-mail Document, you should be taken to the default Mail client.
It should be no different than if you opened Mail and started a new document.
Mail is totally NOT part of Adobe Reader. I'm really not sure what you have done. Mail can't be directing you to buying a subscription.
Try sending an email from a different PDF file to confirm what I'm saying. Also, refer to the Help file in Reader for instructions.

MS Access (JDBC Sender) to File Scenario

Hi,
I want to read an MS Access File thru JDBC Sender Adapter & send the entire details present in MS Access to a File .
Kindly need your valid inputs on this .

Hi,
I have configured Sender JDBC adpater as follows :
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection : jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=
piramid\data\PNG\inf78786\IN\Employee.mdb;
I am getting the following error in Communication Channel monitoring ->
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=
piramid\data\PNG\inf78786\IN\Employee.mdb;' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Can not establish connection:: SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
What might be the issue here ?

Steps for File to IDOC and IDOC to file Scenario

Settings to be done at R/3 like SM59,WE21,WE20
Setting to be done at XI
Can pls somebody send good blog for it.
Regards
Raj

SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Cheers..
Vonkolu

Picking and sending to the relevant email address

Is there a way to send an email to perticular email addresses using the single PHP server script?
E.g.:
A - owner of the website. (www.main.com)
B to Z - distributors (all have linked the website to their own websites).
If a customer of C sends a enquiry entering through Cs website (www.c-website.com/main.html), I need the enquiry to be sent to A and Cs email addresses only. How can this be achived?

Thanks for the guidence. In my case storing email address in flash is a huge taks.
1. What database system do you recommend will work best with PHP and at the same time easy handling?
2. Could you show me how to write the scripts where it query the database and retrieve the appropriate email address? please.

File Adapter to read Zip file and send it as input to another webservice

Hi,
I have the below requirement:
1. A service will generate 3 attachments and place it in a particular directory.
2. SOA service has to pick those 3 files and send those files as input to another custom application which will email.
Design :
1. First SOA will create an archive file of those 3 attachements and then file adapter will poll for that zip file in that location and send that file as a whole to the custom application.
Query:
Now my question, is the above design feasible? If so, how to configure the file adapter to pass the file as input to that custom application?
Kindly do the needful
Thanks,
Priya

You can accomplish this via java embedding activity...Create a java embedding, which will create a zip file.. this java code is easy to implement..
You can also do away with un-necessary polling file adapter.. and you can use "Synchronous File Read" operation of File Adapter.. For Sync Read, you'll have to pass the zip file name, which you can easily fetch from java embedding activity..
Let me know, if this doesn't work.

How to send a file from a java program to a servlet and get a response

Hi,
How can I call a servlet from a standalone java program and send a file to a servlet using POST method and in return gets the status back from the servlet. Any help is appreciated any small sample will help.
Thanks.

Hi,
I am trying the following sample I got from net and am getting the following error. Any help what I am doing wrongs:
06/12/24 02:15:58 org.apache.commons.fileupload.FileUploadBase$InvalidContentTypeException: the request doesn't contain a multipart/form-data or multipart/mixed stream, content type header is null
06/12/24 02:15:58      at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:294)
06/12/24 02:15:58      at org.apache.commons.fileupload.FileUploadBase.parseRequest(FileUploadBase.java:268)
06/12/24 02:15:58      at mypackage9.Servlet1.doPost(Servlet1.java:38)
06/12/24 02:15:58      at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
06/12/24 02:15:58      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
06/12/24 02:15:58      at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
06/12/24 02:15:58      at oracle.security.jazn.oc4j.JAZNFilter.doFilter(Unknown Source)
06/12/24 02:15:58      at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:663)
06/12/24 02:15:58      at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
06/12/24 02:15:58      at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
06/12/24 02:15:58      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:285)
06/12/24 02:15:58      at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:126)
06/12/24 02:15:58      at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
06/12/24 02:15:58      at java.lang.Thread.run(Thread.java:534)Here is the sample client code:
import org.apache.commons.httpclient.HttpClient;
import org.apache.commons.httpclient.methods.PostMethod;
import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
public class PostAFile {
    private static String url =
         "http://192.168.0.17:8988/Vulcan_Materials-ServletPost2-context-root/servlet/Servlet1";
    public static void main(String[] args) throws IOException {
        HttpClient client = new HttpClient();
        PostMethod postMethod = new PostMethod(url);
        client.setConnectionTimeout(8000);
        File f = new File("C:\\load.txt");
        System.out.println("File Length = " + f.length());
        postMethod.setRequestBody(new FileInputStream(f));
        int statusCode1 = client.executeMethod(postMethod);
        System.out.println("statusLine>>>" + postMethod.getStatusLine());
        postMethod.releaseConnection();
}Here is the sample servlet code:
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.PrintWriter;
import java.io.IOException;
import org.apache.commons.fileupload.DiskFileUpload;
import org.apache.commons.fileupload.FileItem;
import java.util.List;
import java.util.Iterator;
import java.io.File;
public class Servlet1 extends HttpServlet
private static final String CONTENT_TYPE = "text/html; charset=windows-1252";
public void init(ServletConfig config) throws ServletException
    super.init(config);
public void doPost(HttpServletRequest request, HttpServletResponse response) throws ServletException, IOException
    try
      response.setContentType(CONTENT_TYPE);
      PrintWriter out = response.getWriter();
      java.util.Enumeration e= request.getHeaderNames();
        while (e.hasMoreElements()) {
          String headerName=(String)e.nextElement();
          System.out.println(headerName +" = "+request.getHeader(headerName));
       //System.out.println("Content Type ="+request.getContentType());
        DiskFileUpload fu = new DiskFileUpload();
        // If file size exceeds, a FileUploadException will be thrown
        fu.setSizeMax(1000000);
        List fileItems = fu.parseRequest(request);
        Iterator itr = fileItems.iterator();
System.out.println("***************************");
        while(itr.hasNext()) {
          FileItem fi = (FileItem)itr.next();
          //Check if not form field so as to only handle the file inputs
          //else condition handles the submit button input
          if(!fi.isFormField())
            System.out.println("\nNAME: "+fi.getName());
            System.out.println("SIZE: "+fi.getSize());
            //System.out.println(fi.getOutputStream().toString());
            File fNew= new File("C:\\", fi.getName());
            System.out.println(fNew.getAbsolutePath());
            fi.write(fNew);
          else
            System.out.println("Field ="+fi.getFieldName());
        out.println("SUCCESS123456: ");
      out.close();
    catch(Exception e)
      e.printStackTrace();
}Any help on what is wrong.
Thanks

No pick and send in File to file scenario

Similar Messages

Maybe you are looking for