No profiles were found in the registry. Outlook sync problem.

Hey guys, sorry to bother you. I've been searching for hours now to no avail. I recently reinstalled my OS on my laptop. (Xp Pro) After installing device drivers and apps, i set up my email. So good so far.  I then installed my BB Desktop Manager and appeared to install correctly. Now, When I try to add Outlook as an app to sync with it says, "No profiles were found in the registry". I'm stuck at this point. Any help or links would be most appreciated.
Thanks

hello,
does your outlook have a default profile defined in outlook ?
The search box on top-right of this page is your true friend, and the public Knowledge Base too:

Similar Messages

  • New Outlook sync problem after update!!!

    I had the 'original' Outlook sync problem, which went away after the iTunes update to 7.3.1, but now, after the iPhone update last night, I have an entirely NEW Outlook sync problem!!
    When I sync the iPhone, right when it gets to the 'syncing contacts' part (that you see in the top box/window in iTunes) I get an error message that I haven't seen before. It says "AppleMobileDeviceHelper has encountered a problem and needs to close..." and it gives me the option to send an error report. I dismiss the error box, and the sync process hangs, and iTunes becomes unresponsive.
    If I open Outlook, the two Apple sync oblects are still enabled, and get no error message. If I re-open iTunes and try to sync again, it only syncs iTunes content, and never even tries to sync my contacts or calendar.
    Anyone having anything similar since last night? The only thing different is the iPhone firmware update.

    I just cancelled the sync by using the slider. I didn't realize I could do that. The phone seems fine. I may try it again and see what happens.

  • I have an alert message in disc utility. Error: storage system verify or repair failed. Problems were found with the partitian map which might prevent booting.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

    While running verify disc in disc utility on 251 GB SSD SM256c Media I came up with this message: Alert system verify or repair failed. In the descriptions box of history it said, problems were found with the partitions map which might prevent booting. This is followed by a message in red reading, Error: Storage system verify or repair failed. At the time I was down loading raw pictures off my camera through a card reader across my computer to a relatively new 2TB Western Digital portable hard drive. after about 13 to 15 pictures downloaded that drive faileded. My Mac Book Air works fine, but i get this message now everytime I run disc verify on this disc. The Macintosh HD checks out fine.

  • User tables belonging to the dbo schema were found in the database...

    Hi
    I´m running SAP on windows server 2003 R2 x64 sql 2005.
    I have installed a sandbox system based on NW 7.01 SR1 ECC 6.0. It´s only abap.
    After that I wanted to make a system copy of our production system to the the sandbox. So my sql colleague took a full backup of the production database and restored it into the sandbox.
    Now I´m trying to run the system copy installation sapinst - SAP ERP 6.0 EHP4 Ready (Support Release 1) - Sotware life Cycle Options - System Copy - MS SQL Server - Target System Installation - Central System - Based on AS ABAP - Central System...
    I choose custom and say it´s a Homogeneus System Copy (MS SQL Servver-specific)
    After that I choose "Use existing database" but the it say:
    *User tables belonging to the dbo schema were found in the database ES0. SOLUTION: You can only install an SAP system in a database with no user objects belonging to the system schema dbo. If there already is an SAP system in the database (MCOD), or you install a Java Add-In, you might have to convert the existing system to its own schema, or contact your SAP support.*
    I have searched the forums and can´t find anything I can use. I found someone wrote that I should change the control.xml file under sapinst directory:
    Proceed as follows:
    1. Stop SAPinst.
    2. Open the file control.xml in the sapinst log directory and look for the following lines:
    AllowNew: mig ? ?false? : ?true?,
    AllowDboObjects: mig ? ?true? : ?false?,
    3. Change these lines to
    AllowNew: ins ? ?true? : ?false?,
    AllowDboObjects: ins ? ?false? : ?true?,
    4. Save the control.xml, restart SAPinst and choose ?Continue old installation?.
    but it is not helping.
    Please advise me.
    If this is the wrong forum please tell which one is correct.
    Best regards
    Thomas
    Edited by: Thomas Aastrøm on Feb 23, 2012 3:49 PM

    Hi again
    Phase 11 is ok now. We changed the database owner to sap SIDadm.
    But now it fails at phase 12 (Move MS SQL Server objects from one schema to another)
    An error occurred while processing option SAP ERP 6.0 EHP4 Ready - Support Release 1 > Software Life-Cycle Options > System Copy > MS SQL Server > Target System Installation > Central System > Based on AS ABAP > Central System. You can now:
    Choose Retry to repeat the current step.
    Choose View Log to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/ERPEhP4/LM/COPY/MSS/SYSTEM/CENTRAL/AS-ABAP/.
    sapinst.log:
    INFO 2012-02-24 13:18:55.427
    Execute step MoveSchema of component |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0
    ERROR 2012-02-24 13:18:56.349
    FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
    ERROR 2012-02-24 13:18:56.146
    MDB-05053  Errors when executing sql command: [Microsoft][ODBC SQL Server Driver][SQL Server]Object 'ep0.AFKO' does not exist or is not a valid object for this operation.
    <p> SOLUTION: If this message is displayed as a warning, you can ignore it. If this is an error, contact SAP support.</p>
    INFO 2012-02-24 13:19:02.583
    An error occured and the user decided to retry the current step: "|NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema".
    ERROR 2012-02-24 13:19:02.770
    FCO-00011  The step MoveSchema with step key |NW_ABAP_OneHost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_CreateDB|ind|ind|ind|ind|0|0|NW_MSS_DB|ind|ind|ind|ind|2|0|MssSysCopy|ind|ind|ind|ind|10|0|MssSchemaMove|ind|ind|ind|ind|2|0|MoveSchema was executed with status ERROR .
    What to do?
    Best Regards
    Thomas

  • Idvd5.01 Errors were found during the burning process (Burned Finished)

    I've never had this problem before, but i'm trying to burn a dvd after all the media and dvd are ready for burning and when I click on the burn icon the following message pops up: Errors were found during the burning process. I've check to make sure nothing is hanging outside the title safe area. Any suggestion to why I'm getting this error.

    Hello, Oscar,
    This message can mean several things.
    First, are you burning an iMovie or a slideshow or both?
    Do you have chapter markers in your movie? Are they on or withing 2 seconds of any transition or at the beginning of your movie?
    Does everything encode properly?
    Are you able to 'save as disk image'?
    Post back with some more details about your project.

  • Errors were found during the burning process!?!?

    I finished importing a movie off of my DV Camera and clicked "share" in the iDVD '06 menu. I selected iDVD and my movie was sent into iDVD 6. After customizing a menu, and inserting a blank disc, the burning process was started. After iDVD6 has finished "processing" and "rendering" the menus and the movie, the progress bar for the action "burning your DVD" pops up. About a quarter of the way through I get a window which says the following:
    Burning Finished
    Errors were found during the burning process.
    After clicking "Details" it says:
    The recording device reported the media error: Write error. (0x0C, 0x00.)
    I have tried burning a movie on all DVD types available.(DVD-R DVD+R DVD RW) Why does this problem keep occurring? Is there a problem with my superdrive?

    Hello Ilzmaster,
    the cause could be your burner, but it's much more likely that high burn speed is the culprit - and you can't control that in iDVD.
    Try creating a disk image (File > Save as Disk image). This creates an .img file on your HDD, that can be stored for future use and gives you the option to preview your DVD on your Mac before burning to disc.
    Next use Disc Utility or Toast to burn your DVD at slow speed. 4x is acceptable, 2x (... or even 1x) is better.
    Use only high quality DVD-R (not DVD+R) media (e.g. Verbatim) to minimize burn errors and compatibility issues. Make sure the DVD is compatible with slow burn speed (e.g. 1x-4x)
    Also: iDVD likes to have the project(s) on your startup disc with 15 - 20 GB of available disc space
    hope this helps
    mish

  • CS4: Unable to install any CS4 product. error:"critical errors were found in the setup"

    I am trying to install adobe photoshop and dreamweaver CS4 on my windows xp. But both of them during the loading of setup file returns the following error:
    "Crtical errors were found in the setup. check the setup log file for details."
    I checked the log file and found the following lines relevant to the error:
    C:\Program Files\Common Files\Adobe\Installers\acce07fd2c8fe7f9e3f26243e626578\resources\scripts\
    Property(S): sessionID = acce07fd2c8fe7f9e3f26243e626578
    Property(S): ProductVersion = 2.0
    Property(S): Manufacturer = Adobe Systems Incorporated
    Property(S): ProductLanguage = 0
    Property(S): ProductCode = {14AFE241-FC6E-4FDB-BCA0-7AD6F4974171}
    Property(S): installLanguage = undefined
    Property(S): LanguageIndependent = 1
    Property(S): ALLUSERS = 1
    Property(S): overrideFile = 0
    Property(S): ARPSYSTEMCOMPONENT = 1
    Property(S): REBOOT = ReallySuppress
    Property(S): ExitWorkflow = 0
    Property(S): AddRemoveInfoDriverAdobeCode = {07CD1281-D5ED-4BB4-8964-7B4F1F36315D}
    Property(S): AddRemoveInfoDisplayName = Adobe Dreamweaver CS4
    Property(S): AddRemoveInfoDisplayVersion = 10.0
    Property(S): AddRemoveInfoPublisher = Adobe Systems Incorporated
    and after few more lines........
    Critical errors were found in setup
    TypeError:'undefined' is null or not an object
    Please see the Setup log file for details.
    I don't what's the problem. many people have this problem but they had not found the relevant thing in the log file. With this information provided please tell me what to do????

    Download the clean u script for CS 4 fro the Adobe site you have to search for it.
    Then try this, create a new user account and log in to this account and the try to install from there.
    Since this ihe Mac forum I assume yu are on a Mac so if that fdoes not work try a safe boot and then install.
    A Safe Boot is rebooting while holding down the shift key until you see the safe boot welcome screen.
    then try to install.
    Oops this is the illustrator forum cross platform sorry I do not know how to safe boot on the PC.

  • What does problems were found with the partition map mean

    Why is there a problem when I run my disk utility that says "problems were found with the partition map that which might prevent booting"?  Why is there a problem????????

    You have to repair your partition map. It's the most important part of the hard drive related to software, because if the partition map doesn't work, the whole hard drive is useless.
    As you have OS X Lion, you should be able to repair it while OS X is started. Open Disk Utility (in /Applications/Utilities), choose your hard drive at the top of the sidebar, and press the button to repair the disk. What do you see in the blank box?
    Also, after choosing the hard drive in Disk Utility, tell me the SMART status, at the bottom of the window. You may also want to check the Macintosh HD status

  • Notification print Error message :- No entries were found in the Cataloge T

    HI All ,
    when  printing  the notification throgh the transaction ISQ2 , I have released the Notification as well the task , even i have tested to complite status also  , but when i am going to Pint the notification i am getting the error message like  no entries were found in the cataloge T.
    Is there any custunization missing or the possibility of autherisation issue , i have checked the cataloge & assignmnet also in cust , it is proper ,
    Regards
    piyush

    resolved throgh debugging , the short text & long text is not maintain for the Catalouge.

  • Hello  J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?  138 photos not having been imported were found in the iPhoto library(bookcase).  Would you care for import them? Yes or no you already have meet this

    onjour
    j ai des probleme au demarage d iphoto le dialogue s affiche et  me demande le  texte suivant ?
    138 photos n’ayant pas été importées ont été trouvées dans la bibliothèque iPhoto.
    Souhaitez-vous les importer ? oui  ou non avez vous deja rencontrer ce proble  si oui pouvez vous m aider
    Merci
    Hello
    J have problem in the demarage d iphoto the dialogue displays and asks me for the following text?
    138 photos not having been imported were found in the iPhoto library(bookcase).
    Would you care for import them? Yes or no you already have meet this prowheat if yes can you m help
    Thank you

    Open your iPhoto Library package with the Finder as shown in this screenshot
    and look in the folder named Auto Import.  Move any files in that folder to a folder on the Desktop and close the package. Do not make any other changes.  Launch iPhoto (the message should be gone) and drag the folder on the Dersktop into the open iPhoto window to import them.
    OT

  • CHANGE ASSISTANT : Failed.   No Environments were found in the Environment

    Hi all,
    Iam trying to apply MP5 on HRMS 9.1 peopletools 8.52 in change assistant getting error as
    *(Step 5) Discovering Hub Environments.*
    Failed.   No Environments were found in the Environment Management Hub.
    Note: All agents should be running and sending pulses for all Application,
    Batch, File and Web Servers for the environment before Change Assistant is started.
    *(Step 6) Pinging Metalink*
    Failed.
    *(Step 7) Pinging Update Gateway*
    Failed.
    *[Mon Dec 10 20:04:29 IST 2012] End Validation*
    Unsuccessful completion (3 Steps Failed).  Click on View Log to see additional messages.
    I have set crawl path correctly, ping is working fine , hub url is also showing agent , change asiistant RUNNING
    pls help
    thanx
    Arvind

    this is what the log file shows...
    unable to find help with the post you hav directed Hakan.....
    Help me...
    [Tue Dec 11 12:02:53 IST 2012] Begin Validation
    output written to: C:\Program Files\PeopleSoft\Change Assistant\validate\validate_2012_12_11_12_2.log
    (Step 1) Creating a Summary of Your Environment
    PS_HOME: F:\PS_HOME\
    Output Directory: D:\change_assistant\output\
    Staging Directory: D:\change_assistant\staging\
    Path: C:\Program Files\PeopleSoft\Change Assistant\jre\bin;.;C:\Windows\Sun\Java\bin;C:\Windows\system32;C:\Windows;F:\PS_HOME\bin\client\winx86;C:\Program Files\PeopleSoft\Change Impact Analyzer\dll;D:\ORACLE\product\11.2.0\dbhome_1\bin;F:\ORACLE\product\11.2.0\dbhome_1\bin;F:\app\299025\product\11.2.0\dbhome_1\bin;D:\apps\299025\product\11.2.0\dbhome_1\bin;D:\app\299025\product\11.2.0\dbhome_1\bin;D:\Oracle_Home\product\11.2.0\dbhome_1\bin;C:\Program Files\CA\SC\CAWIN\;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files\Intel\DMIX;C:\PROGRA~1\CA\SC\CAM\bin;C:\Program Files\CA\DSM\bin;C:\Program Files\TortoiseSVN\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\bin;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin\server;F:\BEA_HOME\TUXEDO\tuxedo10gR3_VS2008\jre\bin
    CLASSPATH: C:\Program Files\PeopleSoft\Change Assistant\changeassistant.jar;C:\Program Files\PeopleSoft\Change Assistant\mx4j-jmx.jar;C:\Program Files\PeopleSoft\Change Assistant\xercesImpl.jar;C:\Program Files\PeopleSoft\Change Assistant\xml-apis.jar;C:\Program Files\PeopleSoft\Change Assistant\xalan_2_7_0.jar;C:\Program Files\PeopleSoft\Change Assistant\serializer.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-logging-1.0.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-httpclient-3.1.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-net-ftp-2.0.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-codec-1.2.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-api-20021118.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-common.jar;C:\Program Files\PeopleSoft\Change Assistant\xmldb-xupdate-20040205.jar;C:\Program Files\PeopleSoft\Change Assistant\xindice-1.1b5-dev.jar;C:\Program Files\PeopleSoft\Change Assistant\psemf.jar;C:\Program Files\PeopleSoft\Change Assistant\psjoa.jar;C:\Program Files\PeopleSoft\Change Assistant\AbsoluteLayout.jar;C:\Program Files\PeopleSoft\Change Assistant\log4j-1.2.8.jar;C:\Program Files\PeopleSoft\Change Assistant\jxl.jar;C:\Program Files\PeopleSoft\Change Assistant\commons-io-1.4.jar;C:\Program Files\PeopleSoft\Change Assistant\jewt4.jar;C:\Program Files\PeopleSoft\Change Assistant\share.jar;C:\Program Files\PeopleSoft\Change Assistant\j2ee.jar
    Current Working Directory: C:\Program Files\PeopleSoft\Change Assistant
    Done.
    (Step 2) Validating your SQL Query Tools
    Found Oracle SQL Query Tool at d:\miscc\Oracle_Home\product\11.2.0\dbhome_1\bin\sqlplus.exe
    Done. 1 SQL Query Tool found.
    (Step 3) Pinging Environment Management Hub
    Pinging 172.17.108.118
    thanx
    Arvind.

  • What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    What does this mean and how do I fix it: "The following warnings and errors were found during the validation of the current project:  - There appears to be a broken asset in your project. Correct this problem before burning this project."

    It means that iDVD has found a problem with one of the movies added to the project.  Did you edit the movie after it had been added to the project.
    Create a new project and add your assets, movies, slides, etc. again and follow this workflow to help ensure the best quality video DVD:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • Were still collecting the latest news - Newsfeed problem

    Hello
    I have a problem with newsfeed of personal sites. The Everybody view of newsfeed does't work. There is
    "Were still collecting the latest news. You may see more if you try again a little later" message always displayed in this view. Other one (Follows, Newsfeed, Mentions) work fine. 
    There are no any errors in ULS and System Log. 
    I'll be very grateful to you for any ideas about cause of problem.
    Kind Regards,
    Alexander

    Hi Alexander,
    According to your description, my understanding is that you got an error when you accessed the newsfeed of personal sites.
    There are multiple reasons for this issue. Firstly , please check whether the Distributed cache is started. You can do as the followings:
     1.Open Start->Administrative Tools->Services.
     2.Scroll to AppFabric Caching Service, check whether it is started. If not, please start it.
     3.Open Central Administration, click Application Management
     4.Click Manage Services on server under Service Applications
     5.On the Services on Server page, locate the Distributed Cache service.
     6.If the Distributed Cache service is stopped and you need to start the service, under Action, click Start.
    More information, please refer to the link below:
    http://www.zquad.in/2012/11/newsfeed-were-still-collecting-latest.html
    In addition, there is anther reason about the permissions of User Profile Application, please take a look at :
    http://blogs.technet.com/b/mpriem/archive/2012/08/20/sharepoint-2013-preview-newsfeeds-showing-nothing.aspx?CommentPosted=true#commentmessage
    http://www.sharepoint2013.me/Blog/Post/82/-There-was-a-problem-retrieving-the-latest-activity--Please-try-again-later
    I hope this helps.
    Thanks,
    Wendy
    Wendy Li
    TechNet Community Support

  • Outlook Syncing Problems

    After syncing my email up with outlook through itunes, I no longer recieve the emails on my computer in outlook. I noticed this when I got an email on my iphone and it had an attachment I couldn't open. So I went to my computer to open it but found out the email wasn't there and neither were the others I had gotten after on my Iphone. I tryed to desync and delete the account from my iphone thinking the emails would return to my Outlook on my computer but that didn't work.
    My email goes through another website before it hits outlook. Could this be the problem, my iphone took all the emails from outlook and now I have to reset my account in outlook. What do I do to fix this problem

    The iPhone doesn't sync email with Outlook, or with any email client. The setting to transfer email account setup information from your computer to your iPhone via your iPhone sync preferences does just that - it transfers account setup information from your computer to your iPhone only, not messages.
    What is the account type - POP or IMAP?
    If a POP account, what is your account setting for removing or deleting messages from the server when downloaded by Outlook, and the same for your account preferences with the iPhone's Mail client?

  • Unique iphone/Outlook sync problem ???

    Hello all,
    I have followed posts for over a month now (since I got my phones) and have yet to see this specific problem. I even spoke with the 1-800 people but their insight was limited at best. So I decided to sign up and place this post. Any help would be appreciated. I too, like many others have had problems syncing my iphone with Outlook (2003) both ways. I use Outlook express for email/contacts (via WAB) these sync fine. I just have to open my email a/c (since both my wife and I have iphones and separate emails). Never get any error messages for Outlook calendar when I sync; in fact occassionally get the "you are about to change more than 5% of what is currently there." When I open Outlook though nothing comes up. Same thing with Outlook; if I place new appt then sync; it does not show up on iphone. I have read and tried every suggestion within these posts to no avail and pretty much had decided I would have to live with just using the calendar on iphone alone. Here is the kicker; my iphone crapped out a week ago; top third of touch screen would not work; called the 800# went through all their template troubleshooting; tried to resync everything again so I could load it on my loaner. Never could pull it up on Outlook though. Accepted the fact I lost my calendar; however when my loaner came to me when I placed my sim card in and synced it; much to my amazement the calendar popped up on my iphone. Still having same problem of new items entered either on iphone or Outlook not syncing either way. BTW have received a new phone now; just wondering if anyone has any insight to this problem and what I could possibly do to fix it.
    Things I have already done (from posts read):
    Uninstalled/reinstalled iTunes
    Have most recent software on iphone
    Added sp2 for Outlook
    Added sp3 for Office
    Inactivated my Norton's when syncing
    Checked and made sure I do not have Windows Live loaded
    Confirmed PST file accepts unicode
    Anyone that has any help for me; it would be much appreciated.
    Thanks in advance.
    Nandan

    I had the same problem when I first got the phone when they first came out and I spent a few hours on the phone with them. I had reoccuring events set up in my outlook that were scheduled with no end date. Apparently it caused some sort of sync problem. I had to go into the event that I scheduled to occur every third day with no end-date and I scheduled it to end around the year 2010. Anyways, I don't know if this will help but it worked for me.
    good luck!

Maybe you are looking for