No Project IMG has been defined for "logical compt". Starting Reference IMG

Hi,
I have my logical component setup, and have my DEV system added. I have the BPH setup, and is trying to do configuration. when i select an IMG and click on "configure" i am getting the following error, but it takes me to the IMG
Error:
"No Project IMG has been defined for Z_LOGIC_COMPT. Starting Reference IMG"
I went and checked in solar_project_admin, system landscape/project/IMG. Selected the development system from the "system role for IMG projects". I can see it in RED. How can i generate this? I guess its because of this, am getting the error above
Thanks!

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

Similar Messages

No Project IMG has been defined for Starting Reference IMG SOLMAN ERROR

Hi All,
I created a off release project in prodcution and assigned logical compenents. When I am trying to create a IMG object for SPRO it is showing an error stating that "No Project IMG has been defined for Starting Reference IMG ". when I click Ok button it is showing another message ""Screen output without connection to user.". I Verified in project administration(solar_project_admin)> System Landscape>IMG projects, status for distributing IMG projects to component systems is showing in Red color. No IMG projects have been distributed into the system.
RFC connections are showing are correctly. I am not able to find the problem and solution. Could any one help me to figureout the problem and what needs to be done
Thanks in advance,
Sreekala Rapuru.

Is it mandatory that i need to create a project view?
I have created a view "activity necessity", but not have selected any of the check boxes in "mandatory/optional/nonrequired". As well i havent generated it. I can do the "configure" now without errors
my question is - is there anything critical which is related to this views? I went through the help page you sent me.. Is this for creating the implementation guide? any guidelines you can send me about this is highly appreciated.
thanks!

APP-PO-14258 no rate has been defined for this date

Hi,
When we are trying to receipt an error is appearing
APP-PO-14258 no rate has been defined for this date
Cause The rate type that you have entered uses pre-defined rates. No rate has been defined for the currnet rate type and rate date combination.
Action: Enter a rate date for which a rate has been defined
Please assist me.

Are you using foriegn currency?
If yes, You have to define exchange rate for that date.

No quality notification type has been defined for inspection type 89

Hi
When I am creating a manual inspection lot and want to create a quality notification it gives me this error "No quality notification type has been defined for inspection type 89" where do I assign the notifications to the inspection lot.???
I want to know where do I configure it??
Regards
Suresh

Hi
Path for assigning the Qualtiy notification type to Qualtiy inspection type:
SPRO--> Qualtiy Mangement --> Qualtiy inspection --> Inspection lot creation -->
Maintain Inspection types.
Select the inspection type and goto details screen
You can find notification type field in the details.Give the value and Save.
Regards
Ramakrishna

Output type config error:No communication data has been defined for transmi

Hi Gurus,
i have copied an existing output type ZOCT to ZORD . when i change the sales order the output is automatically triggered but is not processed successfully instead it is in red. when i see the processing log i could see the error below.
green Object 0000000133
green Output type: UK Sales Order
green Processing log for program RSNASTED routine ALE_PROCESSING
   RED   No partner profiles (message control) maintained
I tried adding communication data in VV11 but i get the below error.
No communication data has been defined for transmission medium A
Message no. VK603.
I am using ordrsp and orders05 in partner profiles and in message control tab i am giving
V1 ZORD SD10 values.
Please suggest me to correct these errors. Your help is much appreciated.Thanks.
Regards.
Sanjeev

Hi V V Reddy,
Thanks a lot for your inputs. I have debugged the program rsnasted at routines and in EDP12 there were repeated entries .
So i deleted all the partner profiles and created and generated them agian.
I have also missed to maintain SP partner function in output type partner functions. I do not see any errors now.
Thank you very much.
Regards,
Sanjeev

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

30" has been flickering for months on start-up until warmed up. Also, brightness won't stay on, but cycles down repeatedly.

OK, I tried setting Energy Savings to 1 minute. The Mac shut down and would not power back up via the power button, had to pull power plug. So it seems to be tied to the Energy settings.

BI Error Logical system name has been changed for this system

Hello All,
I have installed the BI system and did a client copy from 000 to 200 client with profile SAP_ALL.
Now I have loged into the system with client 200 and wen I run RSA1, I am getting the following error
message: "Logical system name has been changed for this system"
Thanks
Sekhar..

Hi,
Goto tcode SCC4.
Switch to change mode. (System will prompt that this table is cross client. Continue)
Select your client (in this case 200). Click on details button (next to change mode button)
Enter the proper logical system name in Logical system field.
Click on Save button.
Then try RSA1.
Hope it helps
regards,
Pruthvi R

BI:Logical system name has been changed for This System

Hi, Gurus,
I want to Use my IDES SAP ERP 7.0 as my BI system for training purposes,when iam executing the transaction RSA1 in the system it is giving message
"Logical system name has been changed for
system"
I Have changed the entries in table "RSADMINA" and maintained the Client no as 100 (My base client for BI) which i have copied from 001.
When iam executing the Transaction RSA1 in 100 it is giving above mentioned error ,whereas in 001 it is working fine.
Please Help . ..
I tried to change the system logical name by "bdls" but it doesnt worked........

Hi Deepak,
Check the entries in table RSLOGSYSMAP (this is meant for correct conversion of logical system names for tansports).
You can easily maintain the entries using tcode RSLGMP.
Hope it helps.
Grtx
Marco
PS I'm not a basis guy but do you have a correct BI installation yet?

RSA1 error Logical system name has been changed for this system

Hello All,
Earlier the RSA1 was activated for client 300 on our crm 5.2. after that we changed the client to 500 using SE16 -> Type table RSADMINA / Check Colum BWMANDT -> 500.
But now when we login to client 500 and execute RSA1 it is showing
Logical system name has been changed for this system"
In scc4 we have not made any changes. Can you tell what should be done ? in the pop up it is showing following steps
Change the name of the logical system (table T000) for client back to SIDCLNT300. This enables you to continue working with the system.
If you really want to change the logical name, than you can, if and when you:
change the system name back to SIDCLNT300,
delete all existing connections between this system and other systems,
delete all transfer structures that still exist, and
do not use ALE or Workflow.
Guys do you know how to fix this ? .
Also do you know Assignment of Source System to Source System ID (table RSSOURSYSTEM) using RSA1 ?
Edited by: Sahad K on Mar 17, 2008 10:55 AM

Hello Hari,
Both the options you said cannot be used
since the logical system SIDCLNT300 is used by client 300 and it cannot be given to client 500. Also there already exist a logical system SIDCLNT500 which is assigned to client 500.
I found out the issue. In the table RSBASIDOC the logical system name that can use rsa1( bw client )is set as SIDCLNT300). Only if we delete that entry and set it to SIDCLNT500 ( 500) we can use it on client 500.
The solution is specified in /message/3284842#3284842 [original link is broken]
Let me try the solution 2 and inform you.
Solution 2:
You cannot delete the source system. Two cases have to be distinguished:
The source system still exists.
Switch to Transaction SM59. Find the destination which has the same name as the logical system of the source system from field SLOGSYS in table RSBASIDOC (see above).
Such a destination does not exist in Transaction SM59. In this case, you have to create the destination to the source system. Name the destination equal the entry in SLOGSYS from above. Then return to the Administrator Workbench and repeat the deletion.
The entry exists but a remote login is not possible. Correct the communication parameters.
Everything works. Change to Transaction SE37, function module RSAR_LOGICAL_SYSTEM_DELETE, Sngl. test. Parameter I_LOGSYS = <log. name of the source system>, I_FORCE_DELETE = 'X'.
The source system no longer exists or was replaced with another source system with the same IP address.
Proceed as described in the first case but make sure, that the field 'Target host' contains a not existing server in the maintenance screen of the destination (Transaction SM59). If necessary, change an existing entry. Later when you delete, the system asks you whether you want to delete, although the source system is not available. Select 'Ignore'.
Incase you have any idea other than this please let me know how to edit the RSBASIDOC table and change the entry to client 500.
Edited by: Sahad K on Mar 18, 2008 5:07 AM

No expense type for estimated costs has been defined

Hi SAP guru,
My client wanna check budget from travel request. Check budget through Funds Management already available when post travel expense before posting to FI however they need on the travel request.
I read the documentation, it could be happen when approval the travel request. The problem is travel request used the activity, and try to enter the estimated cost as value.
When we enter the estimated cost, system refused with error message:
No expense type for estimated costs has been defined. Cannot save
Message no. PTRA_WEB_INTERFACE174
How to link the expense type to estimated cost?
or how is the scenario in order we can check budget from travel request?
any kind help will be appreciate,
dewi

Hello Dewi,
If you have the funds management active, you need to go to
maintainance view V_T706B1 and create an expense type for which
you choose out of the 'special use' drop down box the value
'estimated cost, no reimbursement'.
Background: When saving a travle request we build up a commitment
for the estimated cost. This is new functionality.
Regards,
Raynard

Project Managers to know when a task has been updated for the last time

Hi,
I would like know if there is any timestamp feature in Project Server 2007, so that it can be possible for Project Managers to know when a task has been updated for the last time.
Thanks in advance

Hi,
If you are using the My Tasks to drive the task updates then you can use the 'Applied Requests and Errors' available under 'Go To' in the Task Updates area. Here the PM can find when requests have been approved and how many updates he/she received for a
particular task (by clicking the task name) etc.
Hope this helps
Paul

Order type 'OR' has not been defined for sales area (IDOC related)

Hi,
iam getting the status error as order type 'OR' has not been defined for sales area for ORDERS inbound idoc(it's in status 51),i looked at EDPAR(voe4) table and edsdc(voe2) tables, the sales area has been defined, i don't know why iam still getting this error. please let me know if anyone have any idea or faced any kind of this problem.
Thanks

Hi,
I believe this is nothing to do with the setting the IDOC value..Some config is missing...
Check to make sure if there is a record found in the view V_TVAKZ for the combination..
IF not check with your function consultant regarding this..
Thanks,
Naren

JDev : No accelerator for import assistance has been defined

Hi,
I am using JDeveloper 11g (11.1.1.6.0) but import assistance is not working and its saying "*No accelerator for import assistance has been defined*". I am on Windows 8 64 bit OS. Do we know how to fix it ?
Thanks,
Abhi

Timo Hahn wrote:
Well, you can remove or rename the system11.1.1.x.x.x folder which hold all properties. Next time you start jdev the folder is recreated with default settings. All your changes are lost.
For more info http://tompeez.wordpress.com/2011/08/13/how-to-find-and-reset-the-system11-x-x-x-folder-for-a-jdeveloper-installation/
TimoThanks Timo, it solves my issue.

No accelerator for import assistance has been defined

Has anyone see this message in Jdeveloper? I am using JDeveloper 11.1.1.4.0 and recently I cannot import class in code editor, what should I do?
"No accelerator for import assistance has been defined."

I have opened a new thread for the issue.
JDev : No accelerator for import assistance has been defined
Thanks,
Abhi
Edited by: user10715262 on Feb 10, 2013 2:59 AM

No depreciation areas have been defined for asset

Dear consultant,
By mistake from our user had deactivated Depreciation Area in T-code AS92 for Auc asset 1200005 please suggest
How can we activate Deprecation area ?
Because We already settled 350 line item in same asset and still 150 item we have to settle from this asset.
The problem is if I run any T-code related that asset getting error
No depreciation areas have been defined for asset 1200005-0
Message no. AA025
one more thing i want to tell you that this happend only for one asset not for entire asset class I check in IMG Setting is ok for asset class.

I tried doing this but I got an error:
Depreciation area 01, which you want to create as a new depreciation area in chart of depreciation TTHI, has no depreciation area defined for value takeover. This may be be correct for normal operation, however for the purposes of creating a new depreciation in the productive system, you have to enter a depreciation area whose values are used as base values for the new area.
Do you have another solution for this?
I hope anybody can help me on this issue.

No Project IMG has been defined for "logical compt". Starting Reference IMG

Similar Messages

Maybe you are looking for