No RFC connection could be found in SLG1.

Hi Experts,
I'm Trying to send the contracts (GOA) from SRM to R/3. I create the RFC port and the Idoc as sourcing configuration guide ( WE21, WE42, WE20) but doestn work. When the contract was realeased it show up the message error in SLG1.
The message error is ''No RFC connection could be found''.
The RFC was create too..with this RFC I make all replications by middleware. Is there other point to activate for this?
thanks,
Gustavo

Hi Paulo,
The message types was defined as configuration guide for only inbound in R/3. In the configuration guide I found only informations about receive the idocs in R/3 (inbound). For inbound messages in R/3 system I defined BLAORD and COND_A, I tru to define teh same message types in outbound parametes in SRM,but the messages BLAORD e COND_A doesnt exists in SRM. Is there any documentation to make this?
I was see the note too 641919
Thanks,
Gustavo
Bom dia, Paulo!
Tudo bem?
Foi definido os tipos de mensagem de entrada BLAORD e COND_A no R/3 no tipo de parceiro do SRM. No configuration guide não faz menção na definição das mensagens de saida (outbound) no SRM, encontrei somente a configuração enviando o contrato do R/3 para o SRM. O que eu preciso e enviar do SRM para o R/3. Tentei definir os mesmo parametros de entrada no R/3 na saida no SRM, porem o tipo de mensagem BLAORD e COND_A não existe. Se você tiver alguma documentação sobre isso eu agradeço.
Obrigado,
Gustavo

Similar Messages

An active RFC Connection couldnot be found

Hi friends,
I am doing broadcasting for one work book...
i have done settings and all correct i gues.
But when i executed report its saying"An active RFC Connection could not be found".
I am able to send normal messages via Business workplace .
When i have sent query results its saying successfully mail sent at SOST but i am not geting mail.
I did test for prec server but the report is under waiting state for long time till now...
job is under released status only...
Can you please suggest what can be done to achieve this...???
please help...
Regards,
Aanand....

Any one knows about this please respond..
regards,
aanand

No RFC links could be found

Hi,
In CRM, T.Code: /BEA/CRMB11, give Billing Document no. & execute, in the "Transaction His" tab, select the billing document line item & click on the button-Display Accounting Documents, it shows the below message:
No RFC links could be found
In the "General" Tab in the same t.code, "Billing Status" field is showing here as "C Transferred".
Backend is ECC 6.0.
Pls help.
rgds,
balu

closed no replies

Error: RFC connection host not found

Dear all,
I have configured the SLD and JCO destinations also. But when i test connection system throws the error.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=thr3dev1 GROUP=PUBLIC R3NAME=DEV MSSERV=sapmsDEV PCS=1 ERROR service 'sapmsDEV' unknown TIME Tue Oct 11 19:03:14 2005 RELEASE 640 COMPONENT NI (network interface) VERSION 37 RC -3 MODULE ninti.c LINE 494 DETAIL NiPGetServByName2: service 'sapmsDEV' not found SYSTEM CALL getservbyname_r COUNTER 1
Pls suggest something. Can anybody provide the step check list.
Regds,
Anup

Anup,
the entry sapmsDEV is missing in your "services"-file on the computer that hosts your SLD-Server/J2EE WAS. Windows locates it at %WINDIR%/system32/drivers/etc, unix usually at /etc/.
make an entry like that:
sapmsDEV 3600/tcp (in case, your Systemnumber is 00, otherwise replace the "00" with your actual systemnumber)
kind rtegards, achim

Broadcasting Workbook Error | An active RFC server could not be found

Hi All,
I am facing an issue while trying to broadcast(distribute) a workbook. The broadcasting of a query from the query designer works fine. But when I try to distribute a workbook, it throws up the following error. We have used the SMTP method(Using SMTP plug-in) for broadcasting and we know that we can use RFC(Using RFC connection) too. But my question is whether RFC method is a must for workbook distribution.Kindly help me.
Thanking you,
Best Regards,
Manesh
The Error Log
Processing for user PUSHM, language EN
Processing setting
An active RFC server could not be found
Error occurred during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD
Processing setting !TEMP_2CC00BE0E24C704991039F6E9C2AC4E4 completed with errors
Job step for user PUSHM, language EN ended with errors


Hi,
Are you using BI 7 ?
Have you configured a Precalculation server in transaction RSPRECADMIN ?
Precalculation servers are basically PC, that are used for their Excel capabilities, in order to produce up-to-date workbooks.
Best regards,
Guillaume
Message was edited by:
Guillaume GARCIA

Error in Broadcaster - An Active RFC Server could not be found

Hi all,
I am trying to broadcast a workbook to my mailbox through Information Broadcasting, i am trying this in BI 7.0 system. In the Broadcasting wizard, I gave my mailid & the other required credentials. But when i click on Schedule, i am getting a Error message "An Active RFC Server could not be found. Error occured during processing of framework class CL_RSRD_PRODUCER_EXCEL, type PROD".
I checked in SU01 & my mailid is already added there. So, where am i missing or is there any settings need to be done for the Broadcaster to work?
Thanks,
Murali

The precalc server is not needed if you are generating html output, but certainly is mandatory for the Broiacaster to run/distribute BEx Excel Workbooks.
The BW needs access to a Windows computer that has Excel on it. The BW connects to the Precacl and sends it a request it run a BEx wkbk, which the BW then can email to users.
The precalc server is a Windows Service. You can install it locally on your desktop, or it can be installed on a windows server. There is a little config that needs to be done. The How To Troubleshoot Information Broadcasting link in the other resposne will provide all the steps. You should obtain the most current version of the software from SAP.
You'll need a precalc server for each BW system in your landscape that you want to broadcast BEx wkbks from, so if you have Dev and QA systems, you'll need precalcs for them as well.

DB connect no data found is rfc connection required

Hi Gurus,
I want to retrieve data from oracle database, i have all the table with data in it, but through the source system i.e db connect it does not display any contents of the table, it says no data found, the installation was all done perfecttly fine, i can read the table fields but i am not able to read the data from the table. what could be the problem.
Is an RFC connection required for this db connect to retrieve the data from oracle. or else what is the issue. Can anyone please help me out on this, I already posted long back on this still no reply on it. From the osss notes it allgives information about the intallation but it there is no data found then it does not give any information onthis. Can anyone please help me out on this.
Thanks,
Hem

Hi Hem,
You want to retrieve data from Oracle Database using BW and you are having a problem?
Try isolation technique to solve your problem.
Try to use third party softwares e.g. MS Excel. Retrieve data from Oracle using MSExcel. If MSExcel can retrieve data then you can conclude:
a.) The network connection to Oracle is fine.
b.) Oracle is up and running and is able to serve data from your specified table.
RFC Connection is not required. RFC is only useful for SAP to SAP communication. This connection uses a different technique and uses a different driver to communicate. SAP provided DB Connect Engine. A similar approach as what Microsoft's OLEDB is doing. This to make a transparent connection between various database systems. (whether MSSQL, Oracle, MSACCESS, SYBASE etc.)
As part of isolation technique, are you sure you are accessing the correct table? Try to access other tables. If you can access data of different tables then something is wrong with the table you want to access.
Have you check authorization issues? Are you allowed to extract data?
Hope I have helped. If I did, please grant points...
--Jkyle

The Database Connection could not be found

Hi guys,
we did a complete new installation of EPM 11.1.2.1 for a testing environment.
Did the installation 1-1 to our production system.
But on TEST we have the problem to create database connections:
Tools > Database Connection Manager > New Database Connection > Fails:
8001: The Database Connection could not be found: -15da10bd_1378bcfb29f_-7d2c
Any ideas?
I am Admin and have all privileges.
The problem exists for Essbase connections and HFM, too.
Regards,
Bernd

Are you using a NAS share for storing reporting and analysis files? I mean the RM1 folder?

Workspace Error 8001: The Database Connection could not be found

We had to reboot all our windows servers recently and since then all the database connections in the database base manager in workspace are gone.
I can see all the existing reports but cannot use any of them as I dont have any connections.
Also I cannot create any new connections
I get the error 8001: The Database Connection could not be found: 13cbd63_12b5e2a8b73_-7f8f when I try to create a new connection.
Not sure what the problem is.
Any suggestions?

Hi Pat,
It loks like your Biplus relational DB is corrupted, try with those steps:
1. De-register BI+ from Shared Services (Config Utility->Hyperion Reporting and Analysis > Deregister from Shared Services)
2. Configure against the backup database (Drop and recreate tables option).
3. Re-register BI+ with Shared Services.
4. Re-deploy BI+.
5. Test Workspace and add new connections.
Regards.

Drag UserControl that uses Linq To Entities onto Windows Form, No Connection String named '' could be found in application config file

I have created a Visual Studio 2013 Solution with two projects: A Windows Forms project and a Class Library project. In the Class Library project I have added an entity framework, resulting in an .edmx file and an app.config file. I have copied the app.config
file to the Windows Forms project and added a reference to EntityFramework.dll and a reference to the Class Library.
When there is no code in the user control, I can drag the user control onto the main windows form with no error. However, if I use Linq to Entities in my user control and then try to drag it onto my form, I get an error.
Code in User Control that causes error:
adminentities = new ClassLibrary1.AdminEntities();
var res = from pay in adminentities.PayrollSchedules.Where(x=>x.FiscalYear == 2015) select pay;
The error is:
Failed to create component 'NavigationUserControl'...'No connection string named 'AdminEntities' could be found in the application config file.'
There IS an app.config file in the windows form project with a connection string named 'AdminEntities'. I have also tried a few suggestions I found: 1) Changed * in the connection string to use the namespace of the class library and 2) replaced "
with a single quote. Neither of these changes fixed the issue.
How can I resolve this? Thank you.

Hi RLuther,
>> Failed to create component 'NavigationUserControl'...'No connection string named 'AdminEntities' could be found in the application config file.'
Based on the error message, this issue would be related to the data platform, I suggest you post this issue to the
ADO.NET Entity Framework and LINQ to Entities forum for dedicated support.
The forum link:
https://social.msdn.microsoft.com/Forums/en-US/home?forum=adodotnetentityframework
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

RFC Connection error between R/3 4.7 & ECC 6.0

Hi all,
I m receiving the following error when i test the RFC connection between the mentioned systems..
/ CPIC-CALL: 'ThSAPCMINIT' : cmRc=20 thRc=665#Unknown service
DEV_W0 file contains the following information:
M *****************************************************************************
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service 'sapgw01' unknown
M *
M * TIME        Wed Apr 22 03:59:51 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * MODULE      ninti.c
M * LINE        463
M * DETAIL      NiPGetServByName: service 'sapgw01' not found
M * SYSTEM CALL getservbyname
M * COUNTER     2704
M *
M *****************************************************************************
M
A RFC 2272 CONVID 90657609
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {8E460E4B-7D68-4FAE-A9BD-E212DAFA6A8E})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
Could any one pls. help me..
Thanks & Regards, Subbu

Hi all,
Thanks for ur replies.. I have added as u mentioned but i m receiving the below error??? Could u pls. suggest??
M *
M * LOCATION    SAP-Gateway on host IGATESAP06 / sapgw00
M * ERROR       service '?' unknown
M *
M * TIME        Wed Apr 22 04:58:46 2009
M * RELEASE     640
M * COMPONENT   NI (network interface)
M * VERSION     37
M * RC          -3
M * COUNTER     2733
M *
M *****************************************************************************
M
A RFC 2272 CONVID 94231859
A   * CMRC=20 DATA=0 STATUS=0 SAPRC=665 ThSAPCMINIT
A RFC> ABAP Programm: RSRFCPIN (Transaction: SM59)
A RFC> User: 704817 (Client: 800)
A RFC> Destination: ISMCLNT500 (handle: 2, , {34E2D1F9-B021-4B04-BD35-16E04AF4BD11})
A RFC> Called function module: RFC_PING
A TH VERBOSE LEVEL FULL
A ** RABAX: end RX_GET_MESSAGE
thanks,
Subbu

Service Desk for VAR - RFC Connections to customers

Hi all,
I'm trying to implement Service Desk for a VAR provider, however, I didn't found until now how to connect customer systems to Solution Manager in the VAR provider site.
I was able to create systems in SMSY automatically, as the Business partners and OSS users, but in SMSY the system has no Client (000,100,800) assigned and could not get it as no read RFC for system is maintained. Should this RFC be created using SAPSERV connection via marketplace (automatically or not) or using a simple direct SAPRouter connection to customer? anyone know how can I proceed or know some online documentation available?
Manually maintain this connections could be very anoing as we have a lot of customers and systems.
Thanks in advance for you help.
Best Regards
Pedro Rodrigues

Hi Pedro,
normaly you don't need those RFCs as a VAR, that's right. With the new note 1320545 you also get product versions updated from OSS into SMSY. However if you require all patch levels of your customers in SMSY to do MOPZ you need RFC or SLD connection. You can generate RFCs connections from the SMSY system client screen for ABAP instances. There is a button "Router information" where you can maintain your and your customer's SAProuter IP adresses. These will be included in the routstrings of the generated destinations. Of course this must be done manually for each customer system because SAP suport Portal doesn't know your customers passwords and routers.
Regards
Andreas

STMS: RFC error: Error when opening an RFC connection

Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
Manoliv

Dear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit.

System copy : how to backup your rfc connections, partner profiles ...

system copy : how to backup your rfc connections, partner profiles (we20) amd ports in IDOC processing (we21) ???
Hi forum,
if you want to copy your production system to your quality assurance system you can export users and later on reimport
it to save work. That's good.
But how about RFC connections, partner profiles and ports in IDOC processing ? Anyway to export and reimport it later on ?
Thank you for your help.
Kind regards
O.Eggert

Hi forum,
in the meantime I found out how to handle this matter. May be this solution is not very elegant, but it works.
As for RFC-Connections there are several tables beginning with rfc. e.g., rfccheck. But 4 of it only differ from one system
to the next. These are rfcdes, rfcdoc, rfcattrib and rfccheck. What I did is the following : I used
brspace -u sapsr3/<password> -f tbexport -t "RFC3"
and quite simply exported these tables. Then I deleted some of the RFC-Connections, both ABAP and TCP/IP. After reimporting
what I exported before all these destinations were availlable again. As for ABAP the password had to be reentered but this
can be avoided, too. Have a look at transaction /nsecstore. The tables behind it are RSECTAB and RSECACTB, rspectively.
Export it after having exported the rfc* tables and reimport it after having reimported the rfc* tables. Very important : enable
the option "consistent export" !!!
It worked this way although there might be better and more elegant solutions.
As for transaction we20 check sap not 182172.
Hope that I could be of profit to this forum.
Kind regards
Olaf Eggert
p.s.
import command : brspace -u sapsr3/<password> -f tbimport.
Them select what you exported before.

An RFC destination could not be specified for the logical system

Hello Experts,
I am trying post goods receipt in EWM system in a simple inbound delivery process. It is not getting posted back in ECC. I have my RFC connection setup properly(I assume since I was able to transfer inbound delivery to EWM in first place).It seems some setting related to Outbound queue in EWM is missing.Can anyone tell me in detail what settings are required?Is it something to do with WE20 transaction?I am not sure what settings should be done there.The error log is as below-
An RFC destination could not be specified for the logical system
SB3CLNT011
Message No. B1550
Diagnosis
An RFC destination should be specified for the logical system SB3CLNT011.
This could not be done in this case. SB3CLNT011 is not your local logical system
and this system is not included in the relevant Customizing tables.
Procedure
Check:
RFC
destination
Port
definitions
oubound partner profile of
message type SYNCH for this logical system
Regards,
Khushboo

Hi Oritra and Suraj,
I have checked remote connection in SM59 for both the logical system.It works fine.I understand this is more of a technical issue,but I don't have A local basis team to help me so reaching out to experts here.Can you guide me what technical settings could be checked for EWM-->ECC connection?When I execute BD82 for SB3CLNT011 it shows me green status with message "No messages have been defined for the selection conditions in the model".
Although when I do this for EWM logical system SB3CLNT012 it shows me this with all green status-
System SB3CLNT011 as a partner type already exists
System SB3CLNT012 as a partner type already exists
Port A000000018 with RFC destination SB3CLNT011 already exists
Outbound parameters for message type SHP_IBDLV_CHANGE SHP_IBDLV_CHANGE01 already
Outbound parameters for message type SHP_IBDLV_SAVE_REPLICA SHP_IBDLV_SAVE_REPLI
Outbound parameters for message type SYNCH SYNCHRON already exist
Am I missing something in WE20?
Regards,
Khushboo

No RFC connection could be found in SLG1.

Similar Messages

Maybe you are looking for