No sccm 2012 r2 in wsus product list

SCCM 2012 R2 standalone site server setup on a server 2012 r2 with local wsus server installed.
When configure SUP, in the product list I can see sms2003 and sccm2007 up to sccm 2012 sp1, but can't find sccm 2012 r2 nor other system center 2012 r2 components. Is this correct or I missed something?
thanks in advance

Hi,
You are correct, in addtion:
To update  system center configurtation manager site, before instaling it is always reomended to read the associated KB article and process of updating the envionrment, the options are:
A cumulative update , which provides a set of multiple updates for the current product version. When yinstalling a cumulative update for Configuration Manager on a site server, it installs and runs an update bundle. Update bundles can run on a central
administration site server, a primary site server, a secondary site server, or a computer that runs an instance of the SMS Provider
Or A Service pack, which is a new version of the product
This article provides an
http://technet.microsoft.com/en-us/library/jj553405.aspx provides one with an understanding of the ways and options available when updating a configuration manager environment.

Similar Messages

  • Cannot publish Flash Updates Verification of file signature failed for file SCUP 2011, SCCM 2012 R2 and WSUS all on same Windows Server 2012 machine

    I am attempting to distribute Adobe Flash updates using SCUP 2011, SCCM 2012 R2, WSUS ver4 and Windows Server 2012.  Everything installs without error.  I have acquired a certificate for SCUP signing from the internal Enterprise CA.  I have
    verified the signing certificate has a 1024 bit key.  I have imported the certificate into the server's Trusted Publishers and Trusted Root CA stores for the computer.  When I attempt to publish a Flash update with Full content I receive the following
    error:
    2015-02-13 23:00:48.724 UTC Error Scup2011.21 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab
    I have redone the certificates three times with no luck.  I can import metadata, but any attempt to download content results in the verification error.
    TIA

    Hi Joyce,
    This is embarrassing, I used that very post as my guide when deploying my certificate templates, but failed to change the bit length to 2048.  Thank you for being my second set of eyes.
    I changed my certificate key bit length to 2048, deleted the old cert from all certificate stores, acquired the a new signing cert, verified the key length was 2048, exported the new cert to pfx and cer files, imported into my Trusted publishers
    and Trusted Root Authorities stores, reconfigured SCUP to use the new pfx file, rebooted the server and attempted to re-publish the updates with the following results:
    2015-02-16 13:35:44.006 UTC Error Scup2011.4 Publisher.PublishPackage PublishPackage(): Operation Failed with Error: Verification of file signature failed for file:
    \\SCCM\UpdateServicesPackages\a2aa8ca4-3b96-4ad2-a508-67a6acbd78a4\3f82680a-9028-4048-ba53-85a4b4acfa12_1.cab.
    Is there a chance this content was already created and signed with the old cert, so installing the new cert has no effect?  In ConfigMgr software updates I see 4 Flash updates, all marked Metadata Only (because they were originally published as "Automatic." 
    No Flash updates in the ConfigMgr console are marked as downloaded.  I can't find any documentation on how the process of using SCUP for downloading content for an update marked Metadata Only actually works. 
    Comments and suggestions welcome.

  • SCCM 2012 R2 configure WSUS got error remote SQL Server 2012

    Hi All,
    I got question ask on when i want to configure the WSUS component it failed as per screenshot and my SCCM cant work with it.
    SCCM Server : Windows Server 2012 R2 (WSUS featured installed)
    SCCM Version: System Center Config Manager R2
    Remote SQL Server : Windows Server 2012 R2
    SQL Version: SQL Server 2012 SP1 -11.0.3153
    WSUS Error:
    SCCM Error:
    Hope you all can provide me a good solution on it I had no clue on this.
    Regards,
    Sam

    Sam,
    Recommend you 
    Remove SUP
    Remove WSUS role
    Delete the SUSDB on the remote SQL server
    Reboot the server
    Reinstall WSUS feature
    Reinstall SUP
    Take a look at my blog on installing a SUP on 2012 from the section 'Install WSUS on the remote SUP server'
    http://sccmentor.wordpress.com/2014/09/11/installing-a-remote-sup-in-sccm-2012-r2-on-windows-server-2012-r2/
    Make sure you run the Post Install tasks as well.
    Cheers
    Paul | sccmentor.wordpress.com

  • SCCM Report Based on Microsoft Product list

    Hi Dears
    I need report for software Update in sccm Based on product list.
    what shall I do?
    Best Regards

    software update ? can you be little more specific ?
    are you looking for inventory information ?
    Eswar Koneti | Configmgr blog:
    www.eskonr.com | Linkedin: Eswar Koneti
    | Twitter: Eskonr

  • SCCM 2012 R2 and WSUS

    I have an existing server with WSUS installed and running on it.  I just build a new SCCM 2012 R2 server.  Is it possible to use the WSUS server with my SCCM setup.  If so any documentation on how to make this work?  Thanks.  
    Charles

    It's better not to use an existing working WSUS. You should install WSUS again and let ConfigMgr configure it (locally is good).
    This is how you do it
    http://www.gerryhampsoncm.blogspot.ie/2013/04/sccm-2012-sp1-step-by-step-guide-part.html
    Gerry Hampson | Blog:
    www.gerryhampsoncm.blogspot.ie | LinkedIn:
    Gerry Hampson | Twitter:
    @gerryhampson

  • SCCM 2012 complains about WSUS version

    Our SCCM 2012SP1 cannot communicate with the newly installed WSUS 6.2.
    They're both on Server 2012.  Is there any special patch to install on WSUS 6.2 to get it to work?
    We've changed the default port to port 80/443.
    From WCM.log:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    SMS_WSUS_CONFIGURATION_MANAGER 3/21/2013 10:26:31 AM
    680 (0x02A8)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
    3/21/2013 10:26:31 AM 680 (0x02A8)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 3/21/2013 10:26:31 AM
    680 (0x02A8)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
    3/21/2013 10:26:31 AM 680 (0x02A8)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 3/21/2013 10:26:31 AM
    680 (0x02A8)
    Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
    3/21/2013 10:26:31 AM 680 (0x02A8)
    STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=XXX-SCENTER SITE=XXX PID=6496 TID=680 GMTDATE=Thu Mar 21 17:26:31.636 2013 ISTR0="XXX-WSUS" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 3/21/2013 10:26:31 AM
    680 (0x02A8)

    After installing the admin console on site server, software updates in software library started to show up.  v(^.^)
    However, I am still getting error messages all over the place.
    I have not tried to uninstall/reinstall WSUS 6.2 yet; that would be the last thing I try.
    From SMS_WSUS_SYNC_MANAGER:
     WSUS Synchronization failed.
     Message: Failed to sync some of the updates.
     Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WsusSyncAction.WSyncAction.SyncUpdates.
    This is from SMS_WSUS_CONTROL_MANAGER:
    WSUS Control Manager failed to configure proxy settings on WSUS Server "CTB-WSUS.CHINATRUST.CORP".
    Possible cause: WSUS Server version 3.0 SP2 or above is not installed or cannot be contacted.
    Solution: Verify that the WSUS Server version 3.0 SP2 or greater is installed. Verify that the IIS ports configured in the site are same as those configured on the WSUS IIS website.You can receive failure because proxy is set but proxy name is not specified
    or proxy server port is invalid.
    I confirmed that the SCCM default site and WSUS's Administration site are both using port 80.

  • SCCM 2012 R2 CU4 - WSUS Sync issues

    *EDIT/Update*
    I had incorrectly diagnosed this as an issue with CU4. The issue was in fact between Microsoft and WSUS.
    The method listed in this thread ended up working for me.
    Here is an official KB article for the issue: https://support.microsoft.com/en-us/kb/3058255?wa=wsignin1.0
    (I have a small environment - only 1 SCCM server [primary] and 200 servers managed)
    I upgraded from CU3 to CU4 last week and I cannot get my WSUS to sync all of the updates for April 2015. I also upgraded my test server and it is syncing fine.
    I did some digging yesterday and found out that even tho the site server upgraded (I only have one SCCM server), the SQL update failed because I did not have proper permissions. I've since had a DBA run the update.sql file included with the CU (found at:
    %Program Files%\Microsoft Configuration Manager\hotfix\KB3026739)
    I restarted my SCCM server again this morning and tried running multiple syncs with Microsoft and it is still pulling in nothing. 
    I am not getting any errors in WSUS, wsyncmgr.log, WCM.log, or the change.log for wsus. Everything just looks like it attempted to sync - found nothing - then ended the sync successfully.
    I had one of the networking guys look at the firewall and he says its getting thru and establishing a connection - but it looks like MS is terminating the connection? I cannot see anything that would indicate this in my logs. Here is what he sent me: http://i.imgur.com/znOvxEN.jpg
    Now, to make things even more interesting. In the many many attempts I have made over to the last two days to get SCCM/WSUS to sync April's updates, it has worked in small amounts.... it once expired 16 updates and another time pulled in 2 updates released
    on 4/15/15 (but only 2!). I have my sync settings set up exactly like my test server which, again, is working fine. 
    As always, any help is appreciated!

    sounds like there might be a bigger issue with WSUS and Microsoft?
    https://social.technet.microsoft.com/Forums/en-US/6dbe893b-39f5-4367-902d-678a2a897b9b/wsus-not-syncronizing-aprils-updates?forum=configmanagersecurity
    https://social.technet.microsoft.com/Forums/en-US/a323d2f9-a1ac-48e3-978a-054915c3f1ea/wsus-april-2015-updates-not-synced-from-microsoft?forum=winserverwsus

  • SCCM 2012 - Software Inventory (different product names)

    Hello
    I just try to use software inventory feature and encountered such problem: some software, in particular, for example, WinRAR, changes its name depending on the version of the operating system on which it is installed.
    That is, for example, in the paramenters of report 02D, from which we must take the "right" inventoried software titles, WinRAR listed four different products:
    WinRAR 4.20 (32-bit)
    WinRAR 4.20 (32-разрядная)
    WinRAR 4.20 (64-bit)
    WinRAR 4.20 (64-разрядная)
    But in csv-file I should write exact title of software. So, what I should do? :)

    Yes, I know this is an old post, I’m trying to clean them up, Did you figure this out, if so how?
    Yes you should use the exact title, for the licensing cvs file.
    http://www.enhansoft.com/

  • WSUS on DMZ for SUP SCCM 2012 R2

     
    Hi all,
    We are setting up SCCM 2012 r2 environment for production purpose and we would be having one primary . Due to security reason internet connectivity is not allowed for SCCM primary server , however
    we have some DMZ servers that has internet connectivity .
    My question here is
    Is it possible to have WSUS on DMZ server and SUP role in SCCM primary server ?

    Thanks for you reply..
    You mean we have to install WSUS and SUP in primary site server and also install WSUS in DMZ server, then primary site server WSUS should get Sync from DMZ WSUS. Am I correct ?
    My next question is while installing SUP in SCCM primary site
     , do we need give sync from an upstream data sources location as primary site WSUS or DMZ wsus ?

  • WSUS SP2; SCCM 2012 SP1; Sync failed: WSUS update source not found

    Hi,
    I have installed the Fresh SCCM 2012 SP1 and WSUS 3.0 SP2 + KB2720211 + KB2734608. However, still the Sync is getting failed. This is what I am getting in the wsyncmgr and WCM logs:
    wsyncmgr:
    Sync failed: WSUS update source not found on site PR1. Please refer to WCM.log for configuration error details.. Source: getSiteUpdateSource
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=3668 GMTDATE=Fri Jan 09 18:00:00.537 2015 ISTR0="getSiteUpdateSource" ISTR1="WSUS update source not found
    on site PR1. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_SYNC_MANAGER 1/9/2015 12:00:00 PM
    3668 (0x0E54)
    Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
    1/9/2015 12:00:00 PM 3668 (0x0E54)
    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v2.0.50727... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Checking runtime v4.0.30319... SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    Did not find supported version of assembly Microsoft.UpdateServices.Administration.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Supported WSUS version not found SMS_WSUS_CONFIGURATION_MANAGER
    1/9/2015 11:19:03 AM 4176 (0x1050)
    STATMSG: ID=6607 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.489 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    Remote configuration failed on WSUS Server.
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=ABC.XYZ.net SITE=PR1 PID=2724 TID=4176 GMTDATE=Fri Jan 09 17:19:03.515 2015 ISTR0="DEF.XYZ.net" ISTR1="" ISTR2="" ISTR3=""
    ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_WSUS_CONFIGURATION_MANAGER 1/9/2015 11:19:03 AM
    4176 (0x1050)
    I have used the default port numbers 80 and 443 still the sync is failing. Please provide your advise to fix this issue.
    Regards,
    Malwinder

    WCM:
    Checking for supported version of WSUS (min WSUS 3.0 SP2 + KB2720211 + KB2734608)
    It's not only a matter of installing the console, but also those hotfixes on a remote server ...
    Torsten Meringer | http://www.mssccmfaq.de

  • Disable Automatically Deleted Updates Download on SCCM 2012 with WSUS

    Hi
    I have SCCM 2012 SP1 with WSUS integrated, both are on the same server, I created a structure where I downloaded the updates:
    D:\Wsus\HotfixWinX
    D:\Wsus = The folder where I installed the WSUS role
    HotfixWinX = The folder where I downloaded the hotfix
    When I run "Synchronize Software Updates" the updates downloaded with a time of old age are eliminated automatically, have reviewed the log wsyncmgr and I found this:
    My question is, how can I prevent updates and updates folders to be automatically deleted?
    Thank you.

    This is a fully automated process that only works for expired updates. Do keep in mind that after this specific message the updates still exist in the console. For a very good complete explanation, see:
    http://blogs.technet.com/b/configmgrteam/archive/2012/04/12/software-update-content-cleanup-in-system-center-2012-configuration-manager.aspx
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

  • Installing new SCCM 2012 infrastructure over an existing SCCM 2012 Infrastructure

    Greetings,
    I currently have a standalone SCCM 2012 environment running in production.  This implementation isn't in a hierarchy and doesn't support Macs (non-PKI/HTTPS infrastructure), but is managing 1500 PC clients beautifully.
    However, we have some sites out-of-state that need to be in their own Primary Site, as well as Macs across both sites need managing as well.  
    I have made a new environment entirely on 2012 infrastructure (2012 SCCM, 2012 Server, and 2012 SQL).  This includes a CAS at the top, a PRI for my current site, and SQL for both (all on different hardware, new names, etc.).  I've installed a PKI
    infrastructure, and it's currently working fine managing the three servers it contains.
    I need to start migrating all of the clients and services to the 'new' SCCM implementation, but pushing the SCCM client installs to over the old SCCM doesn't seem to change any settings.  Nor does changing site settings in the control panel of a client.
    Anyone know how to configure new site settings without re-installing the SCCM clients on the 'old' infrastructure?
    Thanks~

    Have you ever used group policy for site assignment? This caught me out when upgrading to a new site code. If it has ever been used, it brands the registry and no amount of tinkering in the configuration manager console or client installation methods could
    fix it.
    To fix our site, I removed the offending GPO settings and set the 'GPRequestedSiteAssignmentCode', 'GPSiteAssignmentRetryDuration(Hours)' and 'GPSiteAssignmentRetryInterval(Min)' items under 'HKLM\Software\Microsoft\SMS\Mobile Client' to delete via GPP.
    Details and symptoms I found at http://blog.coretech.dk/heh/new-agents-will-not-re-assign-to-configmgr-2012-site/.
    Jilhad,
    Looks like most of the machines I was testing were indeed installed via GP before I was able to install via the console.  
    Deleting those registry keys allowed me to push the install over the old environment using 'Install Client' from the 'Devices' console, specifying to re-install client.
    Now, I just have to figure out a script to remove those keys via SCCM
    ***Most of you were wondering why I was installing a CAS environment, it's really because this site doesn't conform all that well to our policies, and they will ultimately be administering their own environment.  It seemed to me that it would be easier
    for me to delegate control/permissions/data using a hierarchy.  It was a tough decision, ***
    Thank you all for your help!

  • Deploy Windows 8 To Go through SCCM 2012 SP1

    First a little backgroud:
    I have SCCM 2012 SP1 with MDT 2012 Update 1 integrated. I am using an MDT UDI task sequence to deploy windows 8 and it works perfectly. My Windows 8 image is fairly thin (only containing OS updates and C++ runtimes), and I am using the MDT database
    and an MDT task sequence in SCCM 2012  to dynamically set a list of SCCM Applications to install as well as settings based on location. 
    Now I want to get Windows To Go provisioning working in SCCM 2012 SP1. I had a powershell script that preparied the drive and applied a thick image (including office and other apps) to it then updated unattend.xml with a computer name and the domain join
    info.  That worked for me however I'd like to levarage the dynamic task sequence that I described above to build these To Go sticks the same as my other Windows 8 machines without having to keep updating the thick image evertime something changes. 
    There isn't much info out there that Iv'e found on setting up SCCM 2012 SP1 to provision windows to go here are the two that I have found 
    http://ixrv.blogspot.com/2012/10/provisioning-windows-8-to-go-with.html
    http://technet.microsoft.com/en-us/library/jj651035.aspx
    I followed the instructions in the first link and was able to run the Windows to Go Creator program and apply the prestaged wim to the USB stick. I rebooted from the USB stick Windows PE started and started to run my task sequence then it errored out on
    the apply image step. At this point it occured to me that the MDT SCCM task sequence was probably not setup for prestaged media and or Windows To Go. 
    So my question is am I on the right track? Do I just need to examine each step in my task sequence and make sure that it will work properly with my Prestaged/Windows To Go stick? If so has anyone actually gotten this to work that could give me some advice?
    Or is it asking too much to have a dynamic Windows To Go task sequence and I should just be building a thick image and using a second task sequence specifically for Windows to go? 
    are there any other resources for Windows To Go with SCCM that I'm missing? 
    Thanks, 
    Tony

    First of all sorry I missed your last three posts I have to check my email notifications. I'll try to answer all of them even though I think the last part is the only one where you are still stuck. 
    When I created my prestaged media I didn't put anything into it except for the the OS image and my PE image. On the Select Application and Select Package screen in the prestaged media wizard remove any application or packages that are added automatically.
    The task sequence is supposed to be smart enough to know if the version of the package that is on the prestaged media is out of date and go to a DP to get it but that didnt work for me. The only way I was able to get it to work was to remove all the packages
    from the prestaged media even the Customsettings package, the MDT toolkit package, USMT, etc.. 
    http://social.technet.microsoft.com/Forums/en-US/configmgrosd/thread/d729d0ff-829f-4af8-91af-2131b3355fd0/
    This thread which is about prestaged media in SCCM 2007 helped me to understand how prestaged media is supposed to work. Basically what I learned is that once the computer is rebooted from the ToGo stick into PE the task sequence will run the same as any
    other task sequence installing any applications and setting up your ToGo stick just like any other computer that runs the task sequence they dont need to be in your prestaged media for this to happen. 
    You shouldn't need to worry about partitioning WTGCreator.exe will partition the ToGo stick for you I'm just using the standard MDT Integrated partitioning in my task sequence. The one thing that I did was set the Windows To Go Creator package to "run from
    distribution point" which speed things up because then it didnt download the prestaged wim then apply it to the USB drive. 
    Is it booting into PE then rebooting? Did you check the "Allow unattend operating system deployment" check box when you made your prestaged media? If so it wants you to have set the task sequence to run in a task sequence variable SMSTSPreferredAdvertID
    to the task sequence ID you want to run. I'd just remake the media and leave that box unchecked. 
    Good luck and let me know how it works for you. I'll check back sooner this time I promise. 

  • SCCM 2012 R2 Update not Downloading

    Hi
    i had install SCCM 2012 R2 and WSUS  on the same server  and i configure the software update point component .(End Point Protection) when I'm trying
     to download software  update, i  click  on All software updates  repository right click and  run synchronization i cant see any update.
    wsyncmgr.log :
    Thread terminated by service request.  $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:41:50.922-330><thread=5384 (0x1508)>
    SMS_EXECUTIVE started SMS_WSUS_SYNC_MANAGER as thread ID 5976 (0x1758).  $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.078-330><thread=2736 (0xAB0)>
    Log level 2  $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 14:46:27.309-330><thread=5976 (0x1758)>
    Wakeup by SCF change  $$<SMS_WSUS_SYNC_MANAGER><07-14-2014 15:19:48.428-330><thread=5976 (0x1758)>
    Please help

    WCm log error
    Remote configuration failed on WSUS Server.    SMS_WSUS_CONFIGURATION_MANAGER    7/15/2014 1:41:13 PM    5680 (0x1630)
    STATMSG: ID=6600 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_CONFIGURATION_MANAGER" SYS=BDC.mydomain.com SITE=NAV PID=2648 TID=5680 GMTDATE=Tue Jul 15 08:11:13.273 2014 ISTR0="BDC.mydomain.com" ISTR1="" ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7=""
    ISTR8="" ISTR9="" NUMATTRS=0    SMS_WSUS_CONFIGURATION_MANAGER    7/15/2014 1:41:13 PM    5680 (0x1630)
    Setting new configuration state to 3 (WSUS_CONFIG_FAILED)    SMS_WSUS_CONFIGURATION_MANAGER    7/15/2014 1:41:13 PM    5680 (0x1630)
    Waiting for changes for 49 minutes    SMS_WSUS_CONFIGURATION_MANAGER    7/15/2014 1:41:13 PM    5680 (0x1630)

  • SCCM 2012 multiple search terms using OR statement

    I have a collection of 100s of machines in SCCM 2012
    I have a short list of machines that I need to add to another collection, is there any way using the search bar at the top of the collection display view to have multiple terms? I've tried commas and semi colons. These are machine names, and I cannot create
    a new query or collection as the machines have no information that seperates them in SCCM, they are seperated by which building they are in, which SCCM is not aware of.

    To add-on, if you really want to add a list of devices the search is not really going to help you. In these case PowerShell is your friend. Have a look at this for example:
    http://miketerrill.net/2013/11/03/how-to-add-computers-listed-in-a-text-file-to-a-collection/v
    My Blog: http://www.petervanderwoude.nl/
    Follow me on twitter: pvanderwoude

Maybe you are looking for