No signals appear in Signals tab of NI-XNET Bus Monitor
Hi, I am trying to use a NI 9862 USB to read a J1939 PGN. I will choose PGN 65265 (CCVS1), SPN 84 (Wheel Based Vehicle Speed) as an example. In the Monitor tab of NI-XNET Bus Monitor, I can see that the Frame counter is increasing at the expected rate for that ID, and the Frame Name column is filled in with my custom text. A couple weeks ago, I was able to click on the Signals tab and see the payload for the Signal I had defined listed converted to engineering units. Now, nothing is appearing in the Signals tab. I have used Add/Remove Signals to select the signal of interest to list in the "Signals in View". Any ideas? I did recently swap out a bad NI 9862 for a new one, but I don't see how that would be related to this issue.
Solved!
Go to Solution.
Hello barkeram
If you are at the add/remove signals, when you select names to search=signals, Are you getting results?
Is the frame view still working fine? did you change any setting like Interface and Database?
Regards
Frank R.
Similar Messages
-
No signal or weak signal samsung
I have my appletv hooked up via hdmi to my samsung dlp hlr5667w tv and I keep getting a "no signal or weak signal" message. Why can't my tv find the Apple TV signal? I do not have any other splitters or devices hooked up and I have the same issue with different hdmi cables. When I unplug the. Plug the Apple TV into the power I get a green apple screen for a few seconds before the no signal message returns.
Welcome to the Apple community Mazino9.
How long is your HDMI cable.
Have you tried using another TV.
You may wish to try the following:
Press and hold the menu and the up button simultaneously on the remote for six seconds, the Apple TV should then begin to cycle through the various resolutions available to it. If you see a picture appear up on your screen, use the remote to scroll down to the OK option and select it. -
How do I get the Tab Group names to appear above the Tabs?
At one point the names of all my Tab Groups appeared above the Tabs. That is, on every page there's a horizontal list of open Tabs. Above that there used to be a similar looking horizontal list of all Tab Groups. Now that horizontal list of Tab Groups is gone.
This was useful for rearranging and re-categorizing Tabs into different Groups because I could see the whole page for any given Tab, and could move the Tab to a different Tab Group simply by clicking on the Tab and dragging to to any Group in the Tab Groups section above the Tabs section. This was usually easier than rearranging Tabs on the Tab Groups page (accessed by clicking the "Group your tabs" icon at the upper right of the display).
I don't know how this feature got there or why it went away, but I liked it.
How can I get this back?Tab groups were the primary reason I used Firefox (since the beginning).
Now that they are gone, so am I !!!!!
-- However ... good news! ... they are not gone, just a tiny bit more difficult to manage.
You right click on the tab and select Move To Group. You then create new tab groups within the Tab Group interface. Once you've done that, the familiar Tab Group boxes icon appears in the upper right hand corner of each Group in full display.
Having done it a few times, I can't even remember now what the original method was precisely. But all the functions are still there -- that's the important thing! And I'm still here on Firefox (at least until the next bone-headed crisis....) -
Calendar not appearing in sync tab on MobileMe System Preferences
The Calendar check box is not appearing in sync tab on MobileMe System Preferences.
When I opened SP, MobileMe and sync tab, I can Calendar showing up and disappearing right away. What is this?
I am sorry if it was already discussed, but I could not find it. I can see topics about iCal bug and syncs but not specificaly this one.
Thanks for any help.
Mario LordeiroMario,
The calendar sync has been removed from the MobileMe Sync preference pane, but I have seen the problem you have described, and can invoke it by accessing the "Open MobileMe Preferences...> selction through the sync icon menu item (Option + Click):
Then I am presented with this:
The "Calendars" choice disappears when I access the sync preference directly from System Preferences.
Seems like a bug to me. -
If I try to download a pdf document, details appear in the tab but not on screen. I am using Firefox. If I use Safari it appears on the screen but the print is blank.
Hi...
Quit your browsers.
Open the Finder.
From the menu bar click Go > Go to Folder
Typs this exactly as you see it here: /Library/Internet Plug-Ins
Click Go
Move the Adobe PDF Browser plugin (or just PDF Browser plugin) to the Trash.
Relaunch either Firefox or Safarai and try downloading a PDF document. -
If i open a new window instead of a new tab, in the new window does not appear the menu tab
i want to open new windows instead of tabs and in the new window should appear the menu tab and scrolling up and down, but now with the new version the menu tab does not appear and i cannot scroll up and down.
Do you mean opening a window via the File menu (File > New Window) or do you always want to open links that you click on web pages in a new window?
See also:
*http://kb.mozillazine.org/Prevent_websites_from_disabling_new_window_features
You can open the <b>about:config</b> page via the location/address bar.
You can accept the warning and click "I'll be careful" to continue.
*http://kb.mozillazine.org/about:config -
Revision level not appearing in material tab of purchase order
hi
I have matained revision level in material master but it is not appearing in material tab of purchase order and print preview of purchase order
regards
BadariHi, If u have created proper change no in CC01 with assigned object material with proper validity period u can give revision level to material.
In order to reflect the current revision level on PO printout, the coding in PO print program should be designed accordingly to pick the latest revision level. PO output needs to be re-issued so that the new output can pick the latest information like PO revision level from the master.
Refer below link also for more information,
[Revision level in purchase order|Revision level in purchase order] -
How do you have Google searches appear in new tab? This was previously not a problem, but it changed and I cannot return the setting. Any ideas?
I recently purchased a second hand new macbook air, although it was second hand to me the previous owner had never actually turned it on.
Something doesn't make sense here, though I'm not saying the previous owner is lying....
Time to send your serial # to iTS and let them see what's happening here.
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html -
How to convert a analog signal to digital signal
Hello,
How to convert an analog signal into digital signal such that every sample of analog signal corresponding to 1.2V will be represented as '1' in digital signal and other samples of analog signal(that are not 1.2v) will be represented(converted) as '0' in digital signal.
And how to display both wavefroms or signals in graph indicators.
Thanks.
Solved!
Go to Solution.If you have 1000 samples, and you want to convert to digital, you are going to get 1000 digital values. Attached is what I mean.
Unofficial Forum Rules and Guidelines - Hooovahh - LabVIEW Overlord
If 10 out of 10 experts in any field say something is bad, you should probably take their opinion seriously.
Attachments:
Analog_to_Digital Hooovahh Edit.vi 52 KB -
How to Use signal In and Signal Out with Respect to this Question
Hi,
I have a requirement where i have to change the data of the employee.
For that i am first searching for the employee using a RFC from R/3.
After searching i call another RFC for udating the Data.
The Data is updated successfully in the R/3, but its not reflecting in the Iview.
Can I use the Portal Eventing Mechansim using Signal In and Signal Out.
If yes then please forward me the example or model file to me on
dhruvpradipshah at gmail dot com
Thanks & Regards,
Dhruv ShahDhruv,
You can update the status by passing the return message or the output of the BAPi / RFC in a table or a form in the iview.
Regards,
Ahmed Salah -
No image appearing in 'New tab' tiles
no image appearing in new tab tiles that thumbnails are not displayed in the tiles.how to solve this?
see:
[[The thumbnails on the new tab page are missing - how to get them back]] -
Everytime I click on something whether it's on Google or opening an Email etc.. I get a pop up ad appear in another tab. I have tried everything to stop this increasing the pop up blockers and other things it still happens. I don't know what i can do to fix this?!
Please review the options below to determine which method is best to remove the Adware installed on your computer.
The Easy, safe, effective method:
http://www.adwaremedic.com/index.php
If you are comfortable doing manual file removals use the somewhat more difficult method:
http://support.apple.com/en-us/HT203987
Also read the articles below to be more prepared for the next time there is an issue on your computer.
https://discussions.apple.com/docs/DOC-7471
https://discussions.apple.com/docs/DOC-8071
http://www.thesafemac.com/tech-support-scam-pop-ups/ -
Hi, can anyone point me to any article/how-to/blog that covers the Signal In and Signal Out in any kind of detail?
Can this functionality only be used between IViews on the same page?
Thanks, Ken MurrayHi Kenneth,
check the SAP Visual Composer Documentation (section <a href="http://help.sap.com/saphelp_nw70/helpdata/en/11/00db4269b2f340e10000000a1550b0/frameset.htm">Define Eventing between iViews</a>) in SAP Library.
<i>>Can this functionality only be used between IViews on the same page?</i>
Yes, you are right this kind of eventing can only be used by iViews placed on the same portal page.
Best regards,
Martin -
Since updating my iPad and iPhone to the new software iOS6, my wifi has not been working properly I'm either getting a very week signal or the signal is dropping completely. Has anyone noticed this?
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
Try This - Renew IP Address:
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
The add new tab + stopped appearing on my tab
Can no longer simply add tab since the ADD TAB (+ sign) no longer appears on existing tab. It simply disappeared this morning.
Hi phylo44,
You should take a look at [https://support.mozilla.org/en-US/kb/how-do-i-customize-toolbars this Knowledge Base article on customizing the toolbar]. It will show you how to add that button back in.
Another possibility is that an addon has been updated and cause the button to move. I know the recent update to Firebug moved the + icon to the side of the toolbar. You can try starting Firefox in Safe Mode by holding down shift while it is starting. If it works after you have disabled all your addons and themes, you can start turning them back on one by one until you find the culprit.
Hopefully this helps!
Maybe you are looking for
-
Can't use bind variable in a function
This is a repost from my earlier post at URGENT: Problem creating the report using Procedure The problem is when I bind a variable in a function, I get REP-0002. Please look at the following steps to reproduce === set serveroutput on create or replac
-
Problems with PSE 6 since loading PSE 10
HELP! LOADED ADOBE PHOTOSHOP ELEMENTS 10 TO MY LAPTOP UNABLE TO DOWNLOAN PICTURES TO ELEMENTS 10. MY CAMERA IS A CANON EOS 20D. SINCE DOWNLOADING PHOTOSHOP ELEMENTS 10 I AM UNABLE TO TO OPEN ELEMENTS 6 FROM MY LAPTOP. PHOTOS LOADED IN MY LAPTOP ARE N
-
Exact String match when calling a recordset
I have a CategoryID column, and a Cats column. The main catefory for that products is on CategortID, but the in the Cats column is a string of other categories that the item is listed in. The problem is that if the search is for category id 94, and t
-
How to assign different Message Type to different Doc. Types
Hi, Can anyone tell me how can I assign different Message Type to different Doc. Types e.g. in ME21N. So that whenever the Doc Type is selected the respective Message Type is automatically assigned. Lucky
-
Can I enter a chat with a live person?