No sound option for the rear spea

Hi,
my problem is, that I can't set the volume seperately for the rear and the front speakers!!!
I searched on my computer after a function, which do so, but there was no!!!
I bought my computer from Dell, including a Sound Blaster Li've! 5. Digital Card
see here:
http://support.euro.dell.com/support/downloads/devices.aspx?c=de&l=de&s=gen&SystemID=DIM_PNT_P4_4 550&os=WW&osl=GE#
(You can find the supported dell sound card of my PC whith clicking on "Audiotreiber")
I searched in the Internet for solutions and on a lot websites I found the information that the Sound Blaster Li've! 5. Digital has also an application which is called: Creative Surround Mixer, but while checking the download Section of Creative, i recognized that there aren't any applications like that!!! =(
I must set the rear speaker louder because they are to far away from me and I only here the front and center speakers!!!
Hope that someone can help me!!!

I think he meant this setting -->
http://img326.imageshack.us/img326/4756/smvol6gt.jpg[/img] width="500" alt="Image Hosted by ImageShack.us" >
If you can't get audio from Right (or Left) speakers, it's normally a connection, driver or setting issue but also you may have broken devices there.
Connection:
- are jack plugs pushed deep enough on right jacks (see on user's guide)?
- are types of jack plugs as should be (differs a bit when 2/2., 5. or 7., see on user's guide)
Driver:
- try another driver version (some similiar issues has been reported w/ some driver versions)
Setting:
- are balances set middle (Surround Mixer or windows playback controls)?
- is digital output only disabled (when analog speakers)?
- are effects turned OFF (CMSS/EAX/etc.)?
- are all un-needed sources muted (surround mixer or Windows play/recording controls)?
- is onboard sound disabled (may disturb)?
jutapaMessage Edited by jutapa on 07-0-2006 0:26 AM

Similar Messages

Add soundfiles (voice over) to existing project – how do I make the sound optional for the participant to listen to?

Hi! I´d like to import soundfiles to an existing project. This is what I´m trying to do: I´d like to have a symbol on each page with a clickbox on top. When (if) the participant wants to listen to the voice over, he/she can click on the symbol and the voice is activated. Right now, the sound file is activated directly when I open the slide. Can anyone give me some advise? Kind regards, Gunilla

It helps if you mention the version you are using. Because you talk about 'click box on top of a symbol' you probably use an older version. Since shapes appeared, that can be used as buttons and can be filled with any image or text, this is no longer necessary: Turn an Image into a Button - Captivate blog
In that case you'll need to replace the slide audio (you see it on the Timeline) by object audio. Audio files can be linked to any objects, and they'll start to play when the object gets visible. First approach would be by creating an audio object. This blog post offers some details: Audio Objects: Control them! - Captivate blog
Second approach: use the command 'Play Audio' triggered by the shape button (or click box). I'd recommend strongly not to use this command as a simple action, unless you are happy with the playhead advancing at the same time: Why choose Standard over Simple action? - Captivate blog Use a standard advanced action instead. If you were on Captivate 7 or 8 I would advise to use a shared action.
I hope you do have that command, think it appeared with CP6. It has the advantage that when another button is clicked that plays another audio clip, the first one will stop automatically. If you have to use an audio object, you'll have to hide the object to have the audio stopped.

I have an iMac G5 running OSX Leopard 10.5.6, how do I activate the external microphone port? In the Sound window there is no option for the external port.

I have an iMac G5 OS 10.5.6. How do I activate the external microphone port? In gen. pref. 'sound' there is no option for the external port.

Your audio settings may have been changed.
Open Audio MIDI Setup (/Applications/Utilities/), then check the Audio Output setting.
Change the Audio Output setting to 44100.0 Hz.
Quit Audio MIDI Setup.
More info here on no sound from built-in speakers:
http://support.apple.com/kb/TS1574?viewlocale=en_US
Any reason why you have not updated to the final verion of Leopard 10.5.8?

Sound option in the control panel

I need to access my sound options within the control panel so I can set my sound for Skype but when I click on the 'sound' option nothing happens - I cannot open the sound menu - any ideas?
I have a compaq cq5307uk
windows 7 home premium 64 bit
Thank you for any suggestions

Hi lj2taylor,
I'm not entirely sure which sound options you are talking about or where you are trying to open them from, so I'm not certain what troubleshooting steps to give you. However, here are some HP support documents for your PC related to sound issues: http://h10061.www1.hp.com/ccsearch/search?pname=cq5307uk&opname=HP+Pavilion+a1747c+Desktop+PC&qry=no...
Perhaps one of these documents will help fix your issue?
Let us know how it goes.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

Hi, Nurlynn.
Thank you for visiting Apple Support Communities.
I would need clarification on this issue to provide a better answer. However, here are a couple articles that I would go through when experiencing issues with the Mic and Camera.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/kb/ts5183
Get help with the camera on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT6350
Cheers,
Jason H.

The Nordins - Options for the next time you need a customer!

The headline is from an email we received: "Verizon - Options for the next time you need customer service!" Well, we changed it, just slightly. Well, on 6/20/2013 we had the TV down; it was said to be a piece of video equipment that went down. We could not get anything on the TV until next day. The sad part is that we were watching the Heat-Spurs game and it quit just 1min-36sec. prior to the end of the game. Then, we could not watch our daily Netflix show we watch every evening before going to bed. So in calling twice, we found out about the video equipment problem. But typically Verizon, they replaced the equipment and thought nothing about the customer that actually lost the reception!! How about crediting us for the time "off the air". You can't have the cake and eat it too. Then, Verizon sends us emails about the bill, customer service, etc. but there is no way for us to email them back!! Why do they think my time is less valuable then theirs; having to call their customer service and to wait a long time for answer by someone in "God knows where country". What does that tell you about the customer service commitment! It's like, yeah you are one of the slob users that keep paying the bills for lousy service. Perhaps it's time for all of us to switch off our TV's for one or two days a week and not pay them for "our time off the grid". Having some couple of thousand TV's off twice a week may shake them up a bit. So here is my idea. Establish an email address where we can reach anyone in customer service directly, in our own state, not somewhere 1000 and more miles away. Additionally, if something is down, does not matter what time of the day, stand up for it and give the customer their credit due. Thanks for reading

It all depends how you use it.
Once the initial break in period is over, like the first year, it should run just fine as long as you don't abuse it, don't let it overheat, keep the dust out etc.
Do get the AppleCare as it's very expensive to repair a Mac.
Some tips:
1: Avoid using the built in keyboard and trackpad as much as possible. I know what's the use, but it's these too area's, the USB ports and the Superdrive that experience the most wear and tear.
2: If you do use the built in keyboard, take off your watch and jewelry, it scratches. mars, reacts with the case and discolors it.
3: The keybord is a bit weak compared to regular PC desktop keyboards, so use a wireless one, but have a wired one around for emergencies. The keyboard collects dirt, grime, hair, dust etc, underneath, you might want to have a light cover over the keys but still let air get underneath.
4: Be gentle with the audio ports and the Superdrive, don't use your computer for watching DVD's. The Superdrive is important for recovering the machine with the installer disk which also must be well taken care of.
5: A GOOD case, like a MacTruck or a padded one will absorb the shocks if dropped while transporting.
6: The biggest concern is other people, they just don't handle things with care because it's not theirs and they are ignorant or even spiteful of the money you spent to have a quality machine.
7: Clone your boot drive to a external regularly, in fact have two, one staggered back in time a few weeks, it's hold option bootable in case your hard drive dies. Free cloning software like Carbon Copy Cloner or the commercial version Superduper does the job well.

I have CS4 web Premium - I am trying to look at the Adobe Cloud option for the 2015 compable product. However...under my registered produst only Acrobate is listed...I also have the subject Adobe product. When I type in the serial # from the oriinal ad

I have CS4 Web Premium - I am trying to look at the Adobe Cloud options for the 2015 compatible products. However...under my registered products...only Acrobat is listed...I also have the CS$ Web Premium Adobe product. When I type in the serial # from the original Adobe CS 4 dvd's package I get a "product already registered"...but I can not find it's registration on any Adobe page and it doesn't show up under registered products on the Adobe Cloud page(s)
Since it's registered...how/where do I find this verification...
Thanks TRinAz
Message was edited by: Tim Rogers - spelling

You will have to contact support by web chat to figure out any such issues.
Mylenium

There is no 4g LTE option for the Helix

I bought a Helix in May directly through a Lenovo gov/military sales rep to evaluate it for education and I am moderately happy with it. I want to add a cellular mobile capability and the Lenovo tech I spoke to said there is only an Ericson 3G option for the Helix. Anyone out there with a 4g LTE model? I thought there going to be a Gobi 4g LTE chip available.

My recollection is that there was a LTE model briefly available but this was withdrawn due to some compatibility problems (I don't know the exact details). There were rumours that these would be resolved with a new LTE model released around August 2013 but as far as I know this never happened.
Matthew

TS4425 when opening the iCloud settings I do not see an option for the iCloud T&Cs (OS 10.8 & iOS6)

when opening the iCloud settings I do not see an option for the iCloud T&Cs (OS 10.8 & iOS6)

which Apple says should appear automatically once the update is completed...
I am perplexed where you read that. It isn't true. The iPad is synced to the data available to all devices using the iCloud account if you have authorized it in the settings; PhotoStream, Contacts, Mail, Calendars, etc. That is how the iCloud works.

How can I download a purchased ringtone so that it appears in the sounds column for the alarm clock sound

How can I download a purchased ringtone so that it appears in the sounds column for the alarm clock sound

Welcome to the Apple Community Elizabeth.
You should be able to access any book you have purchased from iTunes anywhere.
Do you have settings > iBooks > Show all purchases turned on.

Can we disable the anti-alias option for the quick selection tool?

Can we disable the anti-alias option for the quick selection tool?
I can deselect it with the magic wand but not with the quick selection. Any ideas?
thanks,
Dominik

I don't think you can, but in the refine edge dialog you can use the contrast setting to get rid of most of the anti-alias.
MTSTUNER

HT4085 Why isn't "hold" an option for the side switch on the iPad?

Why isn't "hold" an option for the side switch on the iPad?
I'd like to be able to let my 3 year old watch videos on the iPad, but young kids want to touch the screen. I need a method to disable the touch screen. Seems simple, why isn't this an option?
Is there a way to write an app that allows the side switch to act as a "hold" switch?
Mark

mark915 wrote:
Why isn't "hold" an option for the side switch on the iPad?
I'd like to be able to let my 3 year old watch videos on the iPad, but young kids want to touch the screen. I need a method to disable the touch screen. Seems simple, why isn't this an option?
Is there a way to write an app that allows the side switch to act as a "hold" switch?
Mark
The obvious solution is to put the iPad screen out of his reach. Now that's innovative!

Why isnt there a none option for the billing options ?

Why isnt there a none option for the billing options ?
It use to be there...
Please solve this problem as i only download free apps...

There should such an option only if you try purchasing a free app within your iTunes on your computer.

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

Very excited about the new update - Thanks Apple for the keyboard update with new emojis! But why are there no ethnicity options for the families?

D.p.middleton the Adobe Application Manager has been available for quite some time. It not only allows Creative Cloud users to install their applications but also downloads and applies applicable updates. In addition it is also responsible for the licensing and managing your agreement to the terms and conditions of the EULA.
2. this could be due to you selecting a trial subscription to the Creative Cloud? If you go to one of the Adobe Creative products and select Help>Updates it will launch the update portion of the Adobe Application Manager which I believe is the portion you are looking for?
#3 I believe this was already mostly covered in the answer to #2.
#4 the Adobe Application Manager also receives periodic updates which affects both perpetual and Creative Cloud subscription users.
I hope this provides you many of the answers you are looking for? If not please feel free to respond back with any additional inquiries which you have. Also if you are experiencing any difficulties with the update process please post this as well. It may not be necessary to have a full understanding of the inner workings of the Adobe Application Manager to help you resolve your difficulties.

DIM-00035 You have entered and invlaid option for the -EDIT command

Hi Experts,
I am creating oracle instance using oradim utility. I am using oracle 9.2 on windows 2003 server.
I have installed oracle 9.2 and created ORCL database as part of installation. Now I have deleted ORCL database using DBCA. Now I try to create a new DB instance.
I ran the below command:
c:\>oradim -NEW -SID <sidname> -SRVC OracleService<SID> -INITPWD <password> -pfile <pfilepath>
I am getting the below error:
DIM-00035 You have entered and invlaid option for the -EDIT command
Please help me why I am getting this error even though I am creating new service.
Thanks.

The definition for INITPWD is:
-INTPWD password is the password for the new instance. This is the password for the user logged in with SYSDBA privileges. Option -INTPWD is not required. If you do not specify it, then operating system authentication is used, and no password is required.
The passwords for SYS and SYSTEM are created later - when the database itself is created. Nevertheless the error message is strange, there is no -EDIT option in the command. Moreover -NEW and -EDIT are mutually exclusive.
Werner

No sound option for the rear spea

Similar Messages

Maybe you are looking for