No system 9 in start up menu

Replaced defective logic board with a used dual 1.25G board (was a single). System 9 has disappeared from the start up menu. How do i get it back?

"Classic" is an OSX applications that emulates OS9 using an OS9 system folder somewhere on your hard drive. Be aware that some applications do not run well under Classic; I find some games lose half their frame rates under Classic compared to an OS boot. One of my CAD programs will not properly render 3D view under Classic emulation but will with an OS9 boot. Your mileage will vary.
The ability to boot into OS9 is controlled by hardware so, as already pointed out, if the replacement board was not from a 9-bootable machine, you're stuck with Classic emulation.
One thing to check, however: OS( will not boot if it's in a partition larger than around 195G. If your OS9 folder is in a larger partition, try moving it to a smaller one.

Similar Messages

HT204204 My phone crashed after updating it to IOS 8. I can't use it cause its stucked on the start up menu, the apple logo with black background.

Hi to all,
I hope someone can help me. My phone crashed after updating it to IOS 8.3. I can't use it cause its stucked on the start up menu, the apple logo with black background. Even when I restart my phone, it is still stuck on the start up menu, the black background with apple logo in the middle.

Slone,
I finally decided to turn this annoyance into an opportunity. After a lot of experimenting I found that my iPad was just fine under 7.1 if I simply restored it as new. I have a lot of time on my hands and I had 1424 apps on my iPad! This is why every attempt to restore took so long.
I decided to restore as new, spend a day restoring the apps I really used. Doing so gave me a quick iPad with only bout a quarter of the storage used.
Granted it was a pain in the arse, but I wrote it off as in the old days when you had to do this with windows 95 just to keep a stable system.
I DO have some data in a few files of the now unused backup but a quick google search finds a couple Mac programs out there that will allow you go extract audio recordings, app data files etc. from the backup. I'll do that someday if I even miss the files I've probably forgotten that are there.
Anyway, there was nothing wrong with my hardware. I think there were just some troublesome setup items that 7.1 didn't like. Once set up as new, the ipad was fine.
Good luck!

(10.1.3.0.4) Help System does not start

For some reason my help system does not start when selecting from the menu. "Table of contents" or "index" options do nothing. It use to work fine. Conext sensitive help works okay by pressing F1.
Any ideas?

Hi paulfrench, check your documentation settings
Menu Tools -> Preferences -> Documentation
Make sure you have checked all of them.
Luis R.

Yosemite - create space in start up menu

My computers knowledge is limited to say the least. I thought i up loaded Yosemite back in November to my Mac Book Pro, but i didn't. It states i do have enough space in my start up menu. When i go to systems preference, all thats there is a mackintosh HD. i click left i click right but there is no delete in the menu. how do i create space in my start up menu.

I think i have cracked this on my own - just by reading other peoples questions - but thanks

There are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

there are 6 updates to be made with my system and they start but after downloading and rebooting it always says that non could be installt because of an mistake, but no help, no number, no possibility to chose from...

Do you get an error number? What is the exact message?
Two things to try.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder... (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder. Delete com.apple.appstore
- Launch the App Store.
If that doesn't work, try an App Store reset and then try again.
App Store Reset Learned from Old Toad
There is a contact link.
App Store Support

"HP" printer in start up menu

I recently bought a new computer (MacBookPro) and transferred all of the applications, etc. from my old computer to my new one. The problem with my old one was stemming from an HP Printer that wouldn't stop starting up in the start up menu. It isn't listed under the start up menu, but sometimes I still see it come up in the top left of my screen at start up. I am not having any of the problems I was having with the old computer, but I am concerned that I transferred the problem over to my new one. I also have the new operating system, which is what was recommended as a possible solution to my old computer's illness, so possibly the problem is NOT transferred and some part of the HP is still on my computer? Just wondering if this is something I should go into a genius with and have removed before it creates problems on the new one. Thanks so much for your time, Kiele

I think i have cracked this on my own - just by reading other peoples questions - but thanks

System of newly started session does not allow scripting.therefore the sess

Hi,
i am getting an error when i am running the Test script using ECATT is "system of newly started session does not allow scripting.therefore the session cannot be recorded" for recording a transaction
Please let me know the solution asap if you are aware of it.
regards
vishnu

>
vishnukvv wrote:
> Hi,
>
> How can i check that whether particular client and front end is allowing ECATT and Scripting in my system.Please answer ,if you know.
>
> regards
> vishnu
Hi Vishnu,
1)Go to RZ11.
Enter Profile name aas SAPGUI/USER_SCRIPTING and the default value should be true.
Current Value should be set to true. -
This needs to be done by BASIS admin team.
2)Request System Admin team to allow eCATT and CATT allowed in this system.
3)In the SAPGUI front end at the menu,you have options to enable scripting.
The first two steps will be done by Basis team and the step(3) can be set by you.
Regards,
SSN.

Start up menu

hi
can anyone tell me how I delete certain items from my start-up menu when I log in - I seem to get multiple minecraft enabling thanks to my son.
Thanks
GCK67

Users & Groups System Prefs.
Click on your Account.
Select Login Items tab.
Select the offending items and click the delete ( - ) button.
Note that deselecting the checkbox only hides the item on startup, not disable it.

How do i delete the daemon on the start up menu

I just installed an Office 2011 update and now I cannot access any of the programs without deleting the daemon in the start up menu - anyone know what this means?

Daemons are often installed in one of these locations:
/Library folder:
LaunchAgents
LaunchDaemons
/Home/Library folder:
LaunchAgents
If not in one of those locations then you will need to hunt for it:
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, Easy Find, instead. Download Easy Find at VersionTracker or MacUpdate.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
AppZapper
AppCleaner 2.0.6
Automaton
Hazel
CleanApp
Yank 2.1
SuperPop
Uninstaller 1.15.1
Spring Cleaning
Look for others at CNet Downloads or MacUpdate.
For more information visit The XLab FAQs and read the FAQ on removing software.

Try to install windows now I have no operating system, and no start disc

I have the new 27 Imac and I Try to install windows now I have no operating system, and no start disc

Install or Reinstall Lion/Mountain Lion from Scratch
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Erase the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your startup volume (usually Macintosh HD) from the
      left side list. Click on the Erase tab in the DU main window.
3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
        the Security button and set the Zero Data option to one-pass. Click on
      the Erase button and wait until the process has completed.
4. Quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion/Mountain Lion and click on the Install button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
            because it is three times faster than wireless.

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!

Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben

Ehp5 Implementation - System fails to start at MAIN_NEWBAS/STARTSAP_NBAS

Hello,
I'm running an Ehp5 implementation from ERP 6.0. Ehpi is stuck in step Downtime during phase MAIN_NEWBAS/STARTSAP_NBAS with the following error:
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=sapapt01, GWSERV=sapgw00, SYSNR=00
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.10.1.21:3300' not reached
TIME Mon Jan 16 23:03:11 2012
RELEASE 720
COMPONENT NI (network interface)
VERSION 40 RC -10
MODULE nixxi.cpp LINE 3286
DETAIL NiPConnect2: 10.10.1.21:3300
SYSTEM CALL connect
ERRNO 111
ERRNO TEXT Connection refused
COUNTER 226
System start failed
I checked the system instance and it was down. When I try to start up it manually with startsap, I do not get any error:
sapapt01:ippadm 16> startsap
Checking IPP Database
Database is running
Starting Startup Agent sapstartsrv
OK
Instance Service on host sapapt01 started
starting SAP Instance DVEBMGS00
Startup-Log is written to /home/ippadm/startsap_DVEBMGS00.log
/usr/sap/IPP/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Start
Instance on host sapapt01 started.
The problem is that no work process is started nor dispatcher or message server. When I look at the instance work directory I see that the only files that are written are the following:
available.log
sapstartsrv.log
logsave.bin
dev_tp (but it's empty)
The content of sapstartsrv.log is the following:
trc file: "sapstartsrv.log", trc level: 0, release: "720"
pid        29149
[Thr 47879647924784] Tue Jan 17 00:51:54 2012
No halib defined => HA support disabled
CCMS agent initialization: return code 0.
CCMS agent start: return code 0.
Initializing SAPControl Webservice
Starting AutoRestart thread
SapSSLInit failed => https support disabled
[Thr 1079777600] Tue Jan 17 00:51:56 2012
AutoRestart thread started
Starting WebService thread
Webservice thread started, listening on port 50013
Trusted http connect via Unix domain socket '/tmp/.sapstream50013' enabled.
trusted unix domain socket user is starting SAP System at 2012/01/17 0:52:04
The startsap_DVEBMGS00.log at the sidadm home directory shows the following:
Trace of system startup/check of SAP System IPP on Tue Jan 17 00:51:54 ART 2012
Called command: startsap start
00:51:54
Starting Startup Agent sapstartsrv
00:52:04
Instance Service on host sapapt01 started
00:52:04
starting SAP Instance DVEBMGS00
00:52:04
Startup-Log is written to /home/ippadm/startsap_DVEBMGS00.log
00:52:04
/usr/sap/IPP/SYS/exe/run/sapcontrol -prot NI_HTTP -nr 00 -function Start
17.01.2012 00:52:05
Start
OK
00:52:15
Instance on host sapapt01 started
The /var/log/messages content is the following:
Jan 17 00:51:56 sapapt01 SAPIPP_00[29149]: SAP Service SAPIPP_00 successfully started.
I can't find any clue why the system processes are not starting. The phase is the next after kernel upgrade from 700 to 720, so I believe it is related to the switch and maybe my kernel is not correctly updated or something is missing.
Please let me know any suggestion to know why the system is not starting.
Regards,
Alejandro

Hi,
No object was removed with the cleanipc command, anyway I've rebooted the server and then started db and sap again. Now the dev traces are written.
Output of the cleanipc command:
sapapt01:ippadm 42> ./cleanipc 00
Show/Cleanup SAP-IPC-Objects V2.3, 94/01/20
===========================================
+----+
| To inhibit destruction of valid SAP-IPC-Objects |
| during shutdown, this program requires now      |
| special options for removing IPC-Objects.       |
+----+
Running SAP-Systems (Nr)...:
---- Show IPC-Objects of Sap-System 0 -
Number of IPC-Objects...........:    0
Summary of all Shared Memory....:     8802.0 MB (may be incomplete when not in superuser mode)
Number of SAP_ES files found:.............:    0
Number of SAP_ES files removed:...........:    0
dev_w0 trace file:
trc file: "dev_w0", trc level: 1, release: "700"
ACTIVE TRACE LEVEL           1
ACTIVE TRACE COMPONENTS      all, MJ
M sysno      00
M sid        IPP
M systemid   390 (AMD/Intel x86_64 with Linux)
M relno      7000
M patchlevel 0
M patchno    185
M intno      20050900
M make:      single threaded, Unicode, 64 bit, optimized
M pid        29183
M
M
M Tue Jan 17 03:23:58 2012
M kernel runs with dp version 241000(ext=110000) (@(#) DPLIB-INT-VERSION-241000
-UC)
M length of sys_adm_ext is 576 bytes
M ***LOG Q01=> ThInit, WPStart (Workproc 0 1 29183) [thxxhead.c   1290]
M ThInit: running on host sapapt01
M calling db_connect ...
B create_con (con_name=R/3)
B Loading DB library '/usr/sap/IPP/SYS/exe/run/dboraslib.so' ...
B Library '/usr/sap/IPP/SYS/exe/run/dboraslib.so' loaded
*B *** ERROR => Version mismatch between kernel (700.08) and DBSL shared library*
M ***LOG R19=> ThInit, db_connect ( DB-Connect 008192) [thxxhead.c   1449]
M in_ThErrHandle: 1
M *** ERROR => ThInit: db_connect (step 1, th_errno 13, action 3, level 1) [thx
xhead.c   10524]
M
M Info for wp 0
M
M    pid = 29183
M    severity = 0
M    status = 0
M    stat = WP_RUN
M    waiting_for = NO_WAITING
M    reqtype = DP_RQ_DIAWP
M    act_reqtype = NO_REQTYPE
M    rq_info = 0
M    tid = -1
M    mode = 255
M    len = -1
M    rq_id = 65535
M    rq_source =
M    last_tid = 0
M    last_mode = 0
M    semaphore = 0
M    act_cs_count = 0
M    csTrack = 0
M    csTrackRwExcl = 0
M    csTrackRwShrd = 0
M    mode_cleaned_counter = 0
The kernel version seems to be 700 here, I don't know why because when I check the disp+work -version is 720.
Regards,
AN

HT4848 How do I create a Recovery System on my start up volume/hard drive?

So i discovered the article about using the Recovery Disk Assistant....but, I noticed it says that in order to create a Recovery on an external HD that it requires an existing Recovey System on my start up volume...I assume this means a Recovery partition on my startup hard drive? If someone could explain to me how to create one or if I already have one, I would great appreciate the help...
If its relevant I am using a
MacBook Pro Mid 2010
Core 2 Duo 2.4 Ghz
4GB RAM
Intel 120 GB SSD 320 Series

Hopefully you already have it.
The only time a recovery partition can be created is during installation from mac app store, it's automatic and cannot be done manually.

CO01 - system changes sch.start time given by the user (fwd sched., no cap. check, no shifts defined)

Dear Experts,
I am facing a very strange issue. Whenever I am trying to manually create and schedule a discrete production order in ECC 6.0, with 1-forward scheduling (in CO01 transaction), by giving scheduled start date and time and pressing the "Schedule" button; the system changes the start time given by me (the date remains) and executes the scheduling with that start time.
For example, when I want to produce 12072 PCs, and I give 08:00 as shceduled start time, the system changes it to 15:59, adds the operation times correctly and defines the 'correct' scheduled end date (again, with fwd scheduling type!).
There is some logic on how the system changes the scheduled start time given by me. Below a certain production quantity, the issue doesn't come up, lead time scheduling is carried out, as it is expected. So the problem only occurs, when the order qty exceeds a certain limitation. In that case the order cannot be scheduled to a certain time phrame (between 07:59 and 15:59), so the system changes the scheduled start time given by me (whenever the order falls into the mentioned period). Depending on the order qty the mentioned period (to which the order cannot be scheduled) is changing.
I made the following checks in the system:
production calendar is set correctly, it is not blocking the production
all the applied work centers are available from 00-24 hrs
no shifts has been defined on any of the WCs, production is enabled in 00-24 hrs
there is no other production scheduled on any of the work centers, capacity load is 0% on all of them, as it has been checked in CM03
order scheduling was performed with '1-forward' scheduling type
anyway, capacity check is switched off in the system
formulas on the work centers are all correct, the processing time calculated based on them is also correct (No queue, wait, setup, etc. times are set in the system, we are only using processing times.)
no error messages
As far as I know, in the above case lead time scheduling must be carried out, the system is simply 'not allowed' to change the start date given by me, just add operation times to the start and define the scheduled end date.
Thank you in advance,
T

Jiaul,
please find the screenshots.
1.Mark for Relevant finite scheduling in scheduling or capacity tab - yes
2.Can be used for multiple operation - yes
3.Capacity Planner Group set up - yes
Caetano,
in my case the order scheduled start date is exactly the same as the operation start date. The problem is that this date cannot be manually scheduled to a certain time interval, the system changes the scheduled start date specified by me. (Like there was a "blocked period".)
Thank you,
T

HT5706 I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any help?

I just purchased an AppleTV and am trying to connect AirPlay with my mac (2012 model) In 'system preferences > displays' an airplay menu is listed but it says 'no device detected'. My AppleTV and macbook are connected to the same network. Any suggestions why it is not working?

Troubleshoot the network as that is likely what is causing the issue.
Also, temporarily disable the firewall on the Mac and disable IPV6 on the computer.

No system 9 in start up menu

Similar Messages

Maybe you are looking for