No upgrade package found for component SAP_BASIS

Hello,
I'm just upgrading from NW 7.01 to NW 7.4. During the EHP_INCLUSION phase I'm getting this error:
The program has not found a matching SAINT package for 'SAP_BASIS'.
"Last error code set: Enhancement Package inclusion failed, no upgrade package found for component 'SAP_BASIS' "
I've checked the name of patches on stack.xml and upgrade directory, and patches are in the upgrade directory.
Any suggestion?
Thanks.

Hi Ruben,
From the error message
"Last error code set: Enhancement Package inclusion failed, no upgrade package found for component 'SAP_BASIS' "
You need to include delta upgrade package for SAP_BASIS component in the /EPS/in queue.
File name should be similar to "K-740BHINSAPBASIS.SAR". Please check whether such package has been downloaded ,extracted and include into the queue.
Hope this helps.
Regards,
Deepak Kori

Similar Messages

Error in Solar02 " Error - No system found for component SAP LEARNING.....

Hi,
I have selected the Business repository from the Tcode Solar01c, and i can see the list of configuration under Business Scenario,
when i am trying to execute any Tcode,(My understanding is that this Tcode must execute in Development system) it gives the following Error,
" No system Found for Component SAP Learning Solution and Role Evaluation system in project ZPROJ.
In SMSY i have created Two systems Dev :100 and Qas:300 Which are assigned to one logical component whose producted Version in SAP ERP.
Please advise by reviewing above scenario.
Regards,
SM

Hi Irfanl,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps,
-Rohan

No system found for component and Evaluation system in the Project

Hi Folks ,
Im facing this problem when im trying to Execute the T-codes from Solar01 of the Transactins Tab by Selecting the Line item and clicking on Execute button. Following is the Error and there no logs for it.
No system found for component and Evaluation system in the Project
Even i have checked with the RFC settings and Logical components are right
Please do suggest me - This is PRD issue . Try to do the needful .
Thanks in Advance
Amrita
Edited by: Amrita Amrita on Dec 3, 2009 12:53 AM

Hi all,
I've had the same issue with regards to getting the error below when assigning transactions to a Blueprint business process.
"No system found for component and Evaluation system in the Project"
But I think I have solved it and seems pretty simple to change the system role from Evaluation System to any other that is relevant in your landscape.
Go to transaction SOLAR01 > Click on the first level of the Project Name (Under Business Blueprint Structure) to select the Project.
Click Business Blueprint in the Menu > System Role > Choose the relevant System Role (in my case Development)
Click Copy
This should replicate to all nodes and then you should be able to assign transaction to the business processes.
Quite strange and seems simple, I checked the Solution Directory, Solar Project Admin etc etc but couldn't find the solution until this which should work.
If not, there is a similar work around which also works.
Go to transaction SOLAR_PROJECT_ADMIN
System Landsacpe Tab
Systems subtab
Click System Role Assignment
Remove the Evaluation System (or all those not relevant to your Project and Logical Components)
Save Project
Go to SOLAR01 and it should reflect it in the Blueprint.
You can always go back to this and add the System Roles you removed and the Blueprint will reference the correct Role.
Hope this helps everyone,
-Rohan

ThinkVantage System Update - "There are no applicable packages found for your system"

QuestionWhen running TVSU, I am getting a system notification of "There are no applicable packages found for your system"
AnswerThis issue has occured at various times, and may more commonly occur when TVSU updates itself. At the time this article was originally written, the symptom was noted by some customers after updating from version 4.01.0010.
After updating System Update, if no packages are found for your system, please try the following to uninstall and manually reinstall the current version of system update.
Click Start
Click Control Panel
Click Programs and Features
Select System Update
Click Uninstall
Reboot
Download latest version of ThinkVantage System Update
Install it and reboot
Run ThinkVantage System Update and the list of updated drives will now populate correctly.

There are a few comments here that have come in over 3 years...
1) Please update to the latest version of TVSU appropriate for your version of operating system. TVSU should update itself, but please check the reported version when TVSU starts up against the most recent version available to download on support.lenovo.com. Uninstall, download the newer version, and re-install if it does not auto update and you have confirmed a newer version.
2) From time to time, there are issues with the TVSU catalog and updates may not be reported as available for a specific system. Lenovo software teams do their best to ensure the update catalog is current for all supported models, but in the event that you find no updates for your system and believe this is in error, please manually check several of the principle driver versions in device manager and compare with the versions available for manual download on the support site for your model. If later versions of drivers and BIOS are available on the support site, but not made available through TVSU, then use this feedback link to notify the e-support team so they may investigate.
http://support.lenovo.com/us/en/websitefeedback
3) If you have recently changed the system board in your system, or service has changed the board, and TVSU can no longer find updates, or reports an error detecting your system, please reboot and press F1 to enter BIOS. (Note, you may need to shut and restart to enter BIOS). In BIOS, check that the system model type and serial number are correctly displayed. These should match the type and serial numbers on the sticker on the bottom of your system. TVSU identifies correct updates by checking these values in BIOS. When a system board is replaced, there is a service proceedure to update the type and serial number values in BIOS to match that of the new system. If these are shown as blank, this was not performed, and is the reason TVSU is not detecting updates. Please contact Lenovo service if this is the case.

Software Update - "no package found for identifier"

Weirdness on SW Update. All was working fine until 10.6.3. Here is a snippet of the log:
May 5 09:10:22 ******** /usr/sbin/swupd_syncd[20233]: Product 061-7534: no package found for identifier su
May 5 09:17:15 ******** /usr/sbin/swupd_syncd[53099]: Product 061-7127: no package found for identifier su
May 5 09:22:16 ******** /usr/sbin/swupd_syncd[53099]: Product 061-4089: no package found for identifier auto
This happened after I reset SW Update due to packages not being downloaded from Apple. Here is the log from that issue:
Tue May 4 03:36:21 ******** swupd_syncd[4620] <Error>: Unable to download or create .smd file for product 061-7922.
Tue May 4 03:36:21 ******** swupd_syncd[4620] <Error>: Product 061-7922 will not be available for installation.
Tue May 4 04:26:47 ******** swupd_syncd[4620] <Error>: Unable to download or create .smd file for product 061-8067.
Tue May 4 04:26:47 ******** swupd_syncd[4620] <Error>: Product 061-8067 will not be available for installation.
Any ideas? I've been investigating and haven't found a solution.
Thanks!

Hmmm.. I can download the .smd files but I can't download the update packages themselves.

Required component home not found for component 'oracle.as.jrf'

I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you

I am getting the above error message during unpacking a template. Below is what I have done..
First machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed with 2 managed servers up and running fine.
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
Want to create another managed server on a second machine where the First machine has the Admin server..
Second machine:
OS is Oracle Linux 64 bit version 6.4. Weblogic version 11g is installed
echo $MW_HOME
/u01/app/oracle/middleware
echo $WLS_HOME
/u01/app/oracle/middleware/wlserver_10.3
echo $DOM_HOME
/u01/app/oracle/middleware/user_projects/domains/ClassicDomain
I go to the first machine and do a ./pack.sh command to create a template with a name of test.jar and it is successful. Use the -log command to see the logs.(everything is fine)
I copy the above created template test.jar to the second machine..
Than on the second machine, I do the ./unpack.sh command in the $WLS_HOME/common/bin folder and I get the following error message:
fail: read template from "/u01/app/oracle/middleware/wlserver_10.3/common/bin/test.jar"
CFGFWK-60550: Script execution aborted. The script may contain an error.
Required component home not found for component 'oracle.as.jrf' version '11.1.1.6.0'
Any ideas would really appreciate it. Both of the machines have the same weblogic installation and paths. The only difference is the amount of memory each machine has that is all.. Thank you

EJB CBS Build Error: No folder found for attribute meta-inf

I'm trying to activate my EJB DC that works properly when built and executed/deployed in the portal.
But in CBS it fails to build and we got the following error trace:
This is the error trace:
[pppacker] Packing public part 'client'
[pppacker] ERROR: Failed to pack public part: No folder found for attribute meta-inf
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPackTask._execute(PPPackTask.java:295)
[pppacker] ERROR:       at com.sap.tc.buildplugin.techdev.ant.util.BPTask.execute(BPTask.java:20)
[pppacker] ERROR:       at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[pppacker] ERROR:       at org.apache.tools.ant.Task.perform(Task.java:364)
[pppacker] ERROR:       at org.apache.tools.ant.Target.execute(Target.java:341)
[pppacker] ERROR:       at org.apache.tools.ant.Target.performTasks(Target.java:369)
[pppacker] ERROR:       at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[pppacker] ERROR: Caused by: com.sap.tc.buildplugin.pp.PackException: No folder found for attribute meta-inf
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.entity.EHEjbClientJar.findSpecialFolderContaining(EHEjbClientJar.java:126)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.entity.EHEjbClientJar.determineFileList(EHEjbClientJar.java:64)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packEntity(PPPacker.java:697)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packPublicPartContent(PPPacker.java:585)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.packPublicPart(PPPacker.java:532)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPacker.pack(PPPacker.java:460)
[pppacker] ERROR:       at com.sap.tc.buildplugin.pp.PPPackTask._execute(PPPackTask.java:293)
[pppacker] ERROR:       ... 29 more
Ant runtime 0.032 seconds
Ant build finished with ERRORS
Failed to pack public part: No folder found for attribute meta-inf
I'm not sure if this means anything:
Preparing data context..
No public part descriptor found for component "ejb20" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jdbc20" (vendor "sap.com"), public part "default", using legacy mode.
No public part descriptor found for component "jms" (vendor "sap.com"), public part "default", using legacy mode.
No 'default' JDK defined, will use running VM.
Data context preparation finished in 0.017 seconds
How do I resolve this issue?
Thank you in advance.

TRY TO DO ITSELF.

No prefix found for development component

Hello all,
I do not fully understand the concept of Namespace prefixes.
I have created a "Development Component Name" "innobis.de/test" and a "Design Time Package" with value "de.innobis.test" in the SLD.
I imported the Development Configuration from the NWDI and created a new CAF DevelopmentComponent. There is no possibility to choose any namespace-prefix.
When trying to "checkin" the initial activity which contains the newly created DC, the following error is thrown:
FAILED: No prefix found for development component "asdgsdg/dictionary".
Appropriate development component prefix should be configured in SLD
(Restart IDE after reconfiguring SLD).;
No prefix found for development component "asdgsdg/ejbmodule".
Appropriate development component prefix should be configured in SLD
(Restart IDE after reconfiguring SLD).;
No prefix found for development component "asdgsdg/ear".
Appropriate development component prefix should be configured in SLD
(Restart IDE after reconfiguring SLD).
No prefix found for development component "asdgsdg/permissions".
Appropriate development component prefix should be configured in SLD
(Restart IDE after reconfiguring SLD).;
No prefix found for development component "asdgsdg/metadata".
Appropriate development component prefix should be configured in SLD
(Restart IDE after reconfiguring SLD). initial
Any idea? Help very much appreciated.
Thanks,
Kai
(NWDI 7.0, NWDS 7.1 SP07, NW CE 7.1 EHP1 System)

Kai,
check this link on name prefixes
http://help.sap.com/saphelp_nw70/helpdata/EN/df/2761930dd9b74a85198f9e48850046/frameset.htm
Thanks
Bala Duvvuri

Since 1.5: Multiple sources of package comments found for package

SInce I upgraded to JDK 1.5, I get these warnings
Multiple sources of package comments found for package "x.y.z"
for my package comments. Did something change for package.html content?

I already have them in the sources ...Ok, but are you sure that the Javadoc classpath option does not also point to directories with package html files?
It works without warnings, when using 1.4 ... these warnings appear since using 1.5.Yep. The Doclet interface of the Doclet API specifies a method void setRawCommentText(String text) prior to 1.5 this method did exactly what its name implies. With 1.5 the implementation was changed to generate a warning and do nothing if it was attempted to set the comment text multiple times.
What happens is this:
Javadoc sees the package.html files in the sources, creates an appropriate Doc (PackageDoc) instance and sets the comment text. Then for some reason Javadoc encounters package.html files for already existing Doc instances and tries to set the comment text a second (third, fourth, ...) time.
So, all you need to do is to ensure that Javadoc parses the package.html file for a given package only once, i.e. ensure that only sourcepath points to the package.html files but not classpath.

After upgrade to 11.1.1.2 Agreement not found for trading partners

We just upgraded from 11.1.1.1 to 11.1.1.2 and an existing composite that sends a file from Oracle EBS to an outside trading partner is not working.
We tried importing the Agreement from the 11.1.1.2 and when it did not work, we purged the repository and started from scratch.
The error we are getting is:
Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND
This is a file that we are sending from Oracle EBS to an outside trading partner via FTP.
One thing we are noticing is that when we create the agreement, it does not show up under our host TP, it only shows up under the target TP.
We have set up the TP, Channel, and agreements exactly like they are set in the 11.1.1.1 environment.
Here is the log file in debug mode.
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException notifying App
[2010-06-17T07:40:10.471-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enter
[2010-06-17T07:40:10.479-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: payload = <Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">[[
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.486-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Enqueue the exception message:[[
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>7F00000112945B5769F00000AEC3D2E0</correlationId>
<b2bMessageId>10011</b2bMessageId>
<errorCode>B2B-50547</errorCode>
<errorText>
<![CDATA[Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorText>
<errorDescription>
<![CDATA[Machine Info: (afsmlnx04.rheem.com)
Description: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: deliverException: Send message to endpoint IP_IN_QUEUE
[2010-06-17T07:40:10.492-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] URL ===== aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.514-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send TO Endpoint: 509 aq://IP_IN_QUEUE@jdbc/SOADataSource
[2010-06-17T07:40:10.522-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.transport] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.transport.basic.TransportLogger] [APP: soa-infra] [SRC_METHOD: log] TransportProperties.TransportProperties():internal=true;aq.sender.queue_name=IP_IN_QUEUE;aq.sender.datasource=jdbc/SOADataSource;aq.sender.queue_payload_col=PAYLOAD;aq.sender.recipients=b2berroruser;
[2010-06-17T07:40:11.356-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.transport.AppTransportInterface:send Message Successfully Transmitted
[2010-06-17T07:40:11.377-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.msgproc.MessageHandler:findInvocationContext trying doc ref
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] Notification: notifyApp: Exit
[2010-06-17T07:40:11.396-04:00] [soa_server1] [TRACE] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: synchedLog_J] oracle.tip.b2b.engine.Engine:handleOutboundException Updated the Error Message Successfully: Error -: B2B-50547: Agreement not found for trading partners: FromTP Rheem, ToTP JPMorgan with document type JPPositivePay-1-OUTBOUND.
[2010-06-17T07:40:11.397-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@b9d2338] [userId: <anonymous>] [ecid: 0000I_2GB8yFw000jzwkno1C6FTd0000E8,0] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [SRC_METHOD: log] class oracle.tip.b2b.metric.B2BMessageProperties[[
fromTP : Rheem
toTP : JPMorgan
DocumentProtocol : null
DocumentProtocolVersion : null
DocumentType : JPPositivePay
Agreement : null
MessageSize : 0.0
MessageState : ERROR
FromEndpoint : null
FromEndpointProtocol : null
FromEndpointStatus : null
ToEndpoint : null
ToEndpointProtocol : null
ToEndpointStatus : null
Application : null
Application : null
Composite : null
CompositeVersion : null
Service/Reference : null
]]

In another thread Nitesh states:
b2b.documentProtocolVersion is missing in your properties and b2b.toTradingPartnerId is not set properly.
Below are the property, you should set in composite:
b2b.documentTypeName = <doctype>
b2b.documentProtocolVersion = <docRevision>
b2b.fromTradingPartnerId = <HostTPName>
b2b.toTradingPartnerId = <RemoteTPName>
b2b.messageType = <msgType>
If you want to identify TP based on Identifier then use below for TP:
b2b.toTradingPartnerId = <AS2 Identifier Value>
b2b.toTradingPartnerIdType = <AS2 Identifier>
We are setting the b2b.documentProtocolVersion variable in BPEL:
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Key : b2b.documentProtocolVersion
[2010-06-17T07:40:05.294-04:00] [soa_server1] [TRACE:32] [] [oracle.soa.b2b.engine] [tid: orabpel.invoke.pool-3.thread-11] [userId: <anonymous>] [ecid: 0000I_5hM0hFw000jzwkno1C6FTd0000GQ,0:1:100000028] [SRC_CLASS: oracle.tip.b2b.system.DiagnosticService] [APP: soa-infra] [composite_name: RHMAPPositivePayService] [component_name: enquedat] [component_instance_id: 10011] [SRC_METHOD: log] [composite_instance_id: 10011] class oracle.integration.platform.blocks.b2b.B2BReference : oracle.integration.platform.blocks.b2b.B2BReference@8fdf1b3 : Value : 1
Edited by: robn77 on Jun 17, 2010 5:27 AM

No Component found for the structure

Hi
I am getting the following error when extracted the delta upload into BI
No Component found for the structure for article 809875.
The extractor is 2LIS_02_SCL.
The following is the msg in the status bar.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I have replicated and activated the datasource. But still i am getting this error. How to fix it.
Thanks
Annie

Hi Annie,
Activate ur datasource in source system and replicate and also activate in BI system.This is a time stamp problem.After activated try to run ur infopackage again.It should be fine now.
Regards
Chandu

Package assignment for wd component and application configuration

Hello,
Is it possible to change the package assignment for wd component and application configuration?
Usually it is possible via "Other Functions" but for configurations this option is not show
Best regards,
Paul

Hi,
For the Web dynpro component there is an option of other functions,
but for application configuration i couldnot find out.
Priya

Mapping for component Not Found Error ?

Hi does anyone know how this error can be fixed I am trying to refer to a compnent called task and it
is saying I have not mapped it yet it has been mapped inside my coldbox framework ?
The error I get is:
Coldfusion.orm.EntityMappingNotFoundException: mapping for component task not found
Any help would greatly be appreciated on this.
Thanks

When using ORM generator to generate cfcs make sure that Application.cfc has unique app names in order to solve the problem above.

No business interface, component interface or web service endpoint interface found for Session Bean SessionEJB

hi ,
i am just using EJb in my Application
just created an SessionBean and with Local interface in it i am getting this wierd exception with weblogic NetBeans and eclipse also
weblogic.ejb.container.compliance.ComplianceException: No business interface, component interface or web service endpoint interface found for Session Bean SessionEJB
weblogic.ejb.container.compliance.ComplianceException: No business interface, component interface or web service endpoint interface found for Session Bean SessionEJB
    at weblogic.ejb.container.compliance.SessionBeanClassChecker.checkInterfacesExist(SessionBeanClassChecker.java:177)
    at weblogic.ejb.container.compliance.Ejb30SessionBeanClassChecker.checkInterfacesExist(Ejb30SessionBeanClassChecker.java:27)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at weblogic.ejb.container.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:331)
    at weblogic.ejb.container.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:280)
    at weblogic.ejb.container.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:789)
    at weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:222)
    at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:461)
    at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:428)
    at weblogic.ejb.container.deployer.EJBDeployer.runEJBC(EJBDeployer.java:437)
    at weblogic.ejb.container.deployer.EJBDeployer.compileJar(EJBDeployer.java:795)
    at weblogic.ejb.container.deployer.EJBDeployer.compileIfNecessary(EJBDeployer.java:683)
    at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1254)
    at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:442)
    at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
    at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:517)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:159)
    at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:45)
    at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:613)
    at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
    at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:184)
    at weblogic.application.internal.EarDeployment.prepare(EarDeployment.java:58)
    at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
    at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:207)
    at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
    at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:747)
    at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
    at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:250)
    at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:159)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.access$000(DeploymentReceiverCallbackDeliverer.java:13)
    at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer$1.run(DeploymentReceiverCallbackDeliverer.java:46)
    at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    at weblogic.ejb.container.compliance.EJBComplianceChecker.check(EJBComplianceChecker.java:321)
    at weblogic.ejb.container.compliance.EJBComplianceChecker.checkDeploymentInfo(EJBComplianceChecker.java:280)
    at weblogic.ejb.container.ejbc.EJBCompiler.checkCompliance(EJBCompiler.java:789)
    at weblogic.ejb.container.ejbc.EJBCompiler.doCompile(EJBCompiler.java:222)
    at weblogic.ejb.container.ejbc.EJBCompiler.compileEJB(EJBCompiler.java:461)
    Truncated. see log file for complete stacktrace
>

Hi Rajendar,
I think the problem with having empty interfaces, or interfaces without methods for EJBs, is that they don't really make "sense". After deploying your EJB, a client application will use JNDI or dependency injection to access your EJB. So in your case it will look something like this
@EJB
    mytestSSBLocal myejb; //(In this case we are using the local interface)
In the second step, you will want to do something will your EJB, but since mytestSSBLocal doesn't define any methods, there is nothing you can do with your ejb.
The Exception is telling you that weblogic couldn't find a complaint interface for your EJB.
best regards, Nicolas

AjaxUpdate component not found for id: :

Hi,
In my appication, I am using Ajax with Myfaces (JSF 1.2) & Jboss 4.2.1.
I m generating a table having (couple of selectmenu) dynamically by using the binding attribute of <h:panelGrid> and made that table Ajaxed. When i select some item form the select menu its works fine with Myfaces (JSF 1.2) but when I switched to Sun RI implementaion I got "AjaxUpdate component not found for id: :as exception in the console.
Could anyone help me out?

Try to define id for ajaxSupport component yourself
In my case it helps

No upgrade package found for component SAP_BASIS

Similar Messages

Maybe you are looking for