Software Update - "no package found for identifier"

Weirdness on SW Update. All was working fine until 10.6.3. Here is a snippet of the log:
May 5 09:10:22 ******** /usr/sbin/swupd_syncd[20233]: Product 061-7534: no package found for identifier su
May 5 09:17:15 ******** /usr/sbin/swupd_syncd[53099]: Product 061-7127: no package found for identifier su
May 5 09:22:16 ******** /usr/sbin/swupd_syncd[53099]: Product 061-4089: no package found for identifier auto
This happened after I reset SW Update due to packages not being downloaded from Apple. Here is the log from that issue:
Tue May 4 03:36:21 ******** swupd_syncd[4620] <Error>: Unable to download or create .smd file for product 061-7922.
Tue May 4 03:36:21 ******** swupd_syncd[4620] <Error>: Product 061-7922 will not be available for installation.
Tue May 4 04:26:47 ******** swupd_syncd[4620] <Error>: Unable to download or create .smd file for product 061-8067.
Tue May 4 04:26:47 ******** swupd_syncd[4620] <Error>: Product 061-8067 will not be available for installation.
Any ideas? I've been investigating and haven't found a solution.
Thanks!

Hmmm.. I can download the .smd files but I can't download the update packages themselves.

Similar Messages

ThinkVantage System Update - "There are no applicable packages found for your system"

QuestionWhen running TVSU, I am getting a system notification of "There are no applicable packages found for your system"
AnswerThis issue has occured at various times, and may more commonly occur when TVSU updates itself. At the time this article was originally written, the symptom was noted by some customers after updating from version 4.01.0010.
After updating System Update, if no packages are found for your system, please try the following to uninstall and manually reinstall the current version of system update.
Click Start
Click Control Panel
Click Programs and Features
Select System Update
Click Uninstall
Reboot
Download latest version of ThinkVantage System Update
Install it and reboot
Run ThinkVantage System Update and the list of updated drives will now populate correctly.

There are a few comments here that have come in over 3 years...
1) Please update to the latest version of TVSU appropriate for your version of operating system. TVSU should update itself, but please check the reported version when TVSU starts up against the most recent version available to download on support.lenovo.com. Uninstall, download the newer version, and re-install if it does not auto update and you have confirmed a newer version.
2) From time to time, there are issues with the TVSU catalog and updates may not be reported as available for a specific system. Lenovo software teams do their best to ensure the update catalog is current for all supported models, but in the event that you find no updates for your system and believe this is in error, please manually check several of the principle driver versions in device manager and compare with the versions available for manual download on the support site for your model. If later versions of drivers and BIOS are available on the support site, but not made available through TVSU, then use this feedback link to notify the e-support team so they may investigate.
http://support.lenovo.com/us/en/websitefeedback
3) If you have recently changed the system board in your system, or service has changed the board, and TVSU can no longer find updates, or reports an error detecting your system, please reboot and press F1 to enter BIOS. (Note, you may need to shut and restart to enter BIOS). In BIOS, check that the system model type and serial number are correctly displayed. These should match the type and serial numbers on the sticker on the bottom of your system. TVSU identifies correct updates by checking these values in BIOS. When a system board is replaced, there is a service proceedure to update the type and serial number values in BIOS to match that of the new system. If these are shown as blank, this was not performed, and is the reason TVSU is not detecting updates. Please contact Lenovo service if this is the case.

Software Update can't check for updates (Lion)

Just downloaded and installed OSX 10.7. Tried to run Software Update and get the following alert:
'Software Update can't check for updates because of a network problem. The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “swscan.apple.com”.'
Repaired permissions, created new user account... Issue persists. I'm connected to the internet. Software Update System Preference has no entries in the "Software Installed' tab.

No I haven't tried to get the individually. I will just wait because I am not the only one in our household who's iTunes won't download app updates.
The Software Update error has also now changed to:
Software Update can't check for updates because of a network problem.
A network error has occurred. Check your Internet connection, and then try again.
as opposed to earlier when it read:
Software Update can't check for updates because of a network problem.
The file “index-lion-snowleopard-leopard.merged-1.sucatalog” couldn’t be found on the server “matsus2.matilda.net.au”.
So something has changed in the last few hours. Maybe it's not my computer and just something to do with the apple servers. The matsus2.matilda.net.au is the interesting thing as it has no relevance to our internet or home network.

Software update error - Package Authoring: my.result.title ...

Hi,
I updated three SL servers to 10.6.7 and now install.log in all three systems are filled with an error message "Package Authoring: my.result.title and my.result.message not defined or empty". And when checking for new software updates using Server Admin - Server Updates the following error also written into the install log file: Software Update[]: Can't load distribution from (null): Error Domain=NSURLErrorDomain Code=-1000 UserInfo=0x1001805d0 "bad URL" Underlying Error=(Error Domain=kCFErrorDomainCFNetwork Code=-1000 UserInfo=0x100637640 "bad URL")
Has anybody seen this before?
Searching for ideas to fix this problem.
Best Regards, Heimo

On one of my MacMini Server 10.6.7
I'm also seeing a string of these entries in my machines.
5/17/11 5:59:25 AM Software Update[30234] Package Authoring: my.result.title and my.result.message not defined or empty
Typically I get about 25 of them in a block and then
5/17/11 5:59:28 AM com.apple.launchd[1] (com.apple.suhelperd[30235]) Exited with exit code: 2
All in about 10 seconds.
This happens once a day at about the same time...
This is a not so busy MacMini Server that is providing Software Updates to clients ...
I also appear to see this on the client side of a SnowLeopard Clients....
so perhaps it is not a server error at all... But it does appear to be Software Update related.... In my case, I have an internal, local Software Update Server.

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

I just did a software update that was apparently for iPhoto. When I try to open iPhoto it stops at "step 5" and will not go further. what do I do?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

HT1338 There is a lot of talk about the Java security issues and the ability to download a patch fix, do i need to do this or will software update pick this up for me?

There is a lot of talk about the Java security issues and the ability to download an apple patch fix, do i need to do this or will software update pick this up for me?

Thanks for that, how do I establish if I have Java installed as on Safari preferences it indicates the following
Web content - Enable Java
- Enable JavaScript

No upgrade package found for component SAP_BASIS

Hello,
I'm just upgrading from NW 7.01 to NW 7.4. During the EHP_INCLUSION phase I'm getting this error:
The program has not found a matching SAINT package for 'SAP_BASIS'.
"Last error code set: Enhancement Package inclusion failed, no upgrade package found for component 'SAP_BASIS' "
I've checked the name of patches on stack.xml and upgrade directory, and patches are in the upgrade directory.
Any suggestion?
Thanks.

Hi Ruben,
From the error message
"Last error code set: Enhancement Package inclusion failed, no upgrade package found for component 'SAP_BASIS' "
You need to include delta upgrade package for SAP_BASIS component in the /EPS/in queue.
File name should be similar to "K-740BHINSAPBASIS.SAR". Please check whether such package has been downloaded ,extracted and include into the queue.
Hope this helps.
Regards,
Deepak Kori

Software Update can't check for updates because of a network problem....after firmware update

I just bought a MBP w/Lion (10.7.4) and ran software update. The first two items I updated were firmware for SMC (ver 1.5) and EFI (ver 2.7) and now my MBP says: "Software Update can't check for updates because of a network problem." However, I can connect to the Internet to surf the web just fine. This is the only update I've made. Can firmware be uninstalled? If I reverted to the image on my external drive that I did with CCC prior to the update, would that fix it?

Hi! i hope i'm able to explain what i worked out and what worked for me. I had the same message coming up "no internet connection, run network/internet diagnosis" etc etc. Internet connection was fine. What i finally did:
Open airport, check internet, internet options ; with me, IPv6 was set as this (the letters are in german order and not in a english order, sorry...):
In system prefs, network/TCP/IP IPv6 was set to "automatic":
I did change the settings in Airport back to "Link Local" and Software Update worked immediately normal whithout restarting the computer.
No idea what changed the settings; however i did run permission repairs beforehand with no connection to any problems, just as a normal kind of 'maintenance routine'.
Hope this helps others, it worked for me.
Cheers
Csico

Software Update can't check for updates because of a network problem.

The software update app fails with following error msgs. But all network functions fine.
+A networking error has occurred: timed out (-1001). Make sure you can connect to the Internet, then try again.+
+Software Update can't check for updates because of a network problem.+
Deleted the software update plist files in $HOME/Library/Preferences, $HOME/Library/Preferences/ByHost, and HD/Library/Preferences, as per some posts. no effect. Problem persists.
Any Ideas?
Thanks

Same here
The last update I managed to do without problems was +Java for Mac OS X 10.5 Update 5+ - since yesterday the update process has become much, much slower and when I try to install +Security Update 2009 005+ and +iTunes 9+, it fails, usually with the aforementioned error, but also sometimes with Error 400 or Error 600, IIRC.

Software update can't check for updates because of a network problem mac

hi i am facing below probelm on my mac ... i have done all the ip setting on my mac Error is software update can't check for updates because of a network problem mac.Can any one please assit me...

Can Some solve my problem.....

"Software update can't check for updates because of a network problem" - help!

Recently, when I perform a software update check on the pulldown Apple menu, I get this error:
"Software update can't check for updates because of a network problem."
The only problem is that my network works just fine. I use the internet and get emails without any problem. But I can't figure how I can fix Software Update.
The only relevant updates have been for Glims and 1Password. Oh, and note the same problem trying to access the App Store; I just get a "Can't connect to the App Store" error.
Any hints?

I have to solve all my own problems.
The problem was due to Little Snitch. Once I upgraded from 2.4.0 to 2.4.2, my system works swimmingly again.
FIXED!

Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.

It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.

After installing Lion, the Software Update "can't check for updates because of a network problem.But I've no network problem. My internet is working properly. could you help me?

After installing Lion the Software Update "can't check for updates because of a network problem". But I've no network problem. My internet is working properly. Could yoy help me?

Hi All
Same problem this morning but now resoloved.
Update require using the following url support.apple.com/kb/DL1437 update for lion 10.7.1
updates now work with this update
Hope this helps
Thanks

Installing Software Update has been running for over an hour now, anyone else having the same issue?

Installing Software Update has been running for over an hour, anyone else have the same issue?

Hopefully it's been resolved by now - I have no idea how large each one of those files are. The progress bar tells you; FWIW, I only download one at a time - makes it easier and faster and you can choose to do the next one when you have time.

Generate every hour event 2331 for each DP after Software update Deployment Package deletion

We have an organization build on SCCM 2012 R2 with 270 DPs configured with DP Pulls function. The centralized point contains DP sources available for all DP Pull.
We have some problems with Windows Update deployment package, and we decide to delete them. We first remove them from all DPs. After more than a month we delete the deployment package. From this day, we see that the SMS_Distribution_Manager service generate
every hour logs for contacting each of the 270 DPs to ask them for deleting the package.
Remark: At the time we run the delete, some of the DPs were not connected. After 3 weeks all of them were connected. A month later, the SMS_Distribution_Manager
generate always these events every hour.
Each DP responds with a 2331 event that seems OK. Every hour the system begin with two events (2301 and then 2300 for this package, after a 2331 for each
DP). All these events are also present in the application log of the Event Viewer. After the last DP connection that respond with 2331 event, there are no event that generalize a task for the package to definitively remove it from the database.
Could anyone help me to correct the system?

There are no error messages. There are only messages generated in Distribution_manager logs and Event Viewer, showing us server processing and network activity on package that was deleted over 40 days, and that happened every hours. The Microsoft support
give us directives to delete orphan records in 4 tables
pkgServers_L,pkgServers_G,PkgStatus_L,PkgStatus_G)
At this time the correction has positive effect.
A sample of event generated
Log Name:      Application
Source:        SMS Server
Date:          26.02.2014 09:56:19
Event ID:      2331
Task Category: SMS_DISTRIBUTION_MANAGER
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      wwww.xxxx.yyyy.zzz
Description:
On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: Distribution Manager successfully removed package "PS100066" from distribution point "["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=xxx"]\\aaa.bbb.ccc.dddd\".
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SMS Server" />
    <EventID Qualifiers="16384">2331</EventID>
    <Level>4</Level>
    <Task>12</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-02-26T08:56:19.000000000Z" />
    <EventRecordID>825362</EventRecordID>
    <Channel>Application</Channel>
    <Computer>wwww.xxxx.yyyy.zzz</Computer>
    <Security />
</System>
<EventData>
    <Data>PS100066</Data>
    <Data>["Display=\\aaa.bbb.ccc.dddd\"]MSWNET:["SMS_SITE=PS1"]\\aaa.bbb.ccc.dddd\</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>On 26.02.2014 09:56:19, component SMS_DISTRIBUTION_MANAGER on computer wwww.xxxx.yyyy.zzz reported: </Data>
    <Data>
    </Data>
</EventData>
</Event>
Regards

Software Update - "no package found for identifier"

Similar Messages

Maybe you are looking for