No Video Scopes after graphics upgrade.  Why?

I am on a Mac Pro that came standard with the Nvidia GeForce 8800 GT. I installed a second card (identical) so that I can have up to four monitors. Since then, I have not been able to see any scopes when using Color. They worked previously, just not after the graphics upgrade. I just ran a software update and am using all current software as of 7-24-09. The other flaw I see is that when going to single screen mode, it will resize the windows to fit the screen however it does not resize the interface within the windows (first time I've seen this). Please help!

Zebulun wrote:
Do a forum search about multiple graphics cards if you're a bit skeptical and you'll also find the solution.
Or from within Color go:
Help > Release Notes
Gory details on dual display cards is documented.
- pi

Similar Messages

  • Toshiba 32TL838: video flickering after fw upgrade in menus, using HDMI input

    Hi,
    yesterday I upgraded my 32TL838's firmware to version 6.4.0Y.1 / 94.6.27.8 using the network upgrade feature.
    After the upgrade I reset the TV to start over with factory settings.
    During the quick setup after the reset I noticed a very poor video quality. The whole image flickered, had a ghost effect and looked interlaced. The menus were almost unreadable.
    After completing the setup the TV switched to normal TV mode (DTV cable) and at least the tv picture looked quite normal. While cable TV input is selected, I can also open menus like before, they're displayed correctly.
    But as soon as I switch to HDMI input, the picture is getting nuts again, just as during the initial setup, including the TV's menu overlays. Sometimes it's getting stable for maybe 30 seconds but then it's crippled again.
    Some words about my setup: the TV uses only HDMI input 1 and the cable input, nothing else is connected.
    The HDMI input links to an Onkyo TX-SR508 AV receiver that is being fed by a Fantec 3DS4600 media player and BDP-S373 BluRay player.
    Because I expect the what-about-your-HDMI-cabling question, I exchanged the HDMI cables but as expected that did not help at all.
    At least I seem to be successful in working around the problem when using the Fantec player.
    Before I upgraded the firmware I was able to use the player with 1080p/60Hz and the player was setup accordingly.
    Now I switched to 1080p/50Hz and the video picture looks okay again. (However I did only a short test and as I said, sometimes_
    the picture is okay for a short time.)
    Unfortunately my BluRay player has no menu to change the frequency, so watching BluRay or the online services the player offers, is impossible.
    So what can I do now? A firmware downgrade (if that's possible) would be a quick temporary workaround I could accept. But in the medium term I expect Toshiba to restore the features they promoted and for which I paid.
    (Youtube stopped working with the old firmware and it looks as if 1080p/60Hz doesn't work anymore with the latest firmware.)
    Does anybody know a way to downgrade the firmware using an USB key? I already downloaded the previuos release tl838_853886.bin but I don't have a clou how (and if) it can be installed.
    Thanks for your hints
    belektro

    > Before I upgraded the firmware I was able to use the player with 1080p/60Hz and the player was setup accordingly.
    I think you mixed simply the PAL and NTCS settings.
    Usually all external players provide an option where you could choose between PAL and NTSC.
    NTSC standard is the common one for countries in South / North America and Japan,
    The PAL is used in Europe and some countries in Asia.
    Both PAL and NTCS support 24p (24 frames per second) but most output for PAL and NTSC use interlaced frames which means that:
    NTSC (60Hz) supports fps 60i or 30p
    PAL (50Hz) generally uses 50i or 25p;
    Probably the external player supports PAL settings and its set to 50Hz and therefore its play properly using the 1080/50Hz.

  • Fan problem after graphics upgrade in 8570w

    I swapped the graphics card in my HP 8570w laptop for an AMD Firepro m4000, and now the fan runs constatly. It doesn't appear to be overheating as it's often just blowing failry cool air.  I used CPUID HWMonitor to check the temperature of the CPU/GPU and it seems like what is controlling the fan isn't getting a reading for the GPU temp and is defaulting to a high value.
    Any ideas on what I should do. I'm not to worried that something's overheating, but the constantly running fan is a little annoying.

    That is the problem with mxm video cards. There is no universal standard nor interoperability. I suspect the card you have installed is missing some sensor that the original had, causing the BIOS to go haywire. Have you checked the BIOS to see if maybe the "fan always on" option is enabled and have you tried resetting the advanced Windows power properties to maybe set the cooling policy to "passive"? Otherwise short of a firmware upgrade for the video card (which I have no idea whether such a thing even exists) I am afraid you just have a failed upgrade on your hands. 

  • [SOLVED] Video problem after graphic card change

    I changed M/B + graphic card and have problem with mplayer and youtube videos:
    https://drive.google.com/file/d/0B_jeWg … sp=sharing
    Both are nvidia geforce. The new is ASUS GT630-SL-2GD3-L 2GB GDDR3 PCI-E RETAIL
    I had and have the same nouveau drivers.
    Any idea?
    Thank you!
    Last edited by hariskar (2014-05-17 03:49:19)

    If you're not interested in why nouveau doesn't work, you can mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309
    If on the other hand you want to dig into this, please provide more information e.g. some logs, check systemd's journal.

  • DownloadHelper only works on youtube video downloads after FireFox upgrade to 32.0

    Firefox upgraded today to 32.0. The add-on DownloadHelper is at 4.9.23. DownloadHelper has worked fine until today. Now it will not offer to download videos from any other sites besides YouTube.

    Hi silverdollar,
    Thank you for your question, please also make sure to ask the addon developer this question. [https://addons.mozilla.org/en-US/firefox/addon/downthemall/developers]
    [https://bugs.downthemall.net/] is the bug section of their site as well you may want to check your preferences for the add on or try it in a new profile to make sure there is not issues with other extensions.

  • No digital video import after kernel upgrade to 2.6.32

    I have read the thread started and marked SOLVED by schatzs:
    http://bbs.archlinux.org/viewtopic.php?id=87846
    however like Himmi.Jimmy in that thread, I cannot import any video.  I have a sony handycam TVR230 and I am trying to use kino.
    The AV/C controls work (ie I can rewind the tape), but when I click capture the tape moves forward for 4 to 5 seconds and then stops.  The capture screen stays black and nothing get imported.
    Last edited by kekules_dream (2010-01-02 14:48:54)

    Yes, I had to do that too, and because of that I had to downgrade nvidia as well.  I am worried about that as a long term fix.  Arch keeps on marching along and ignoring major upgrades has eventually caused problems for me in the past.  Do you think this is a more general problem or just specific to antique handycams?
    Last edited by kekules_dream (2010-01-04 15:08:25)

  • Video problems after RAM upgrade

    I recently upgraded my ram from 1GB to 2GB DDR2 667 MHz and everything looks fine with regards to recognizing the RAM and starting up. However, I recently started to notice some video problems in certain areas. For example, my VLC player has problems playing back video now, and it shows a black screen for the video for some avi files but plays back the audio fine. Some games, like Plants vs Zombies, play audio and not the video as well. Has anyone else had this problem?

    Don't know anything about 4AllMemory.  But they do indeed have a small Mac section listed.  Hard to tell if the memory listed is specifically for your model.  Also not obvious if they have lifetime warrantees too.
    As for OWC's page.  Yes, that 4GB selection, which if you clicked on it would take you here, is memory that will work on your 3,1.  The only real difference between it and the one listed below it for a few dollars more is that the latency of the ram.  You probably woudn't even notice the difference (cas 4 vs. cas 5).

  • ı  cant  still  play   at  yahoo  games   after  java   upgrade,  why    someone    doesn't  hall  me

    ı  have  mac  book  air   ,  mac  os  mountain  lion   x   8    2    and  java   7   9  is  loaded...ı  cant  play    at  yahoo  games   after  java  upgradede  to   7 9  ,  ı  have  been   writing  here   to  expect  someone  hear me   and  help  me?   is  this   just  for   trade   or    help  customers    to  solve   problems  they  meet...ı   want  apple  professionals    hear   and  help  me  !!!  what  can  ı  do?    all  were   done  properly  but   when  ı   enter  yahoo  lounge   and  attemp  to    join  a  table   ,   it  quits   and    ı  cant  join  then  it  says  error  lodging....can  someone  help  me  ,  pls  urgent  !!!!

    ı  have  mac  book  air   ,  mac  os  mountain  lion   x   8    2    and  java   7   9  is  loaded...ı  cant  play    at  yahoo  games   after  java  upgradede  to   7 9  ,  ı  have  been   writing  here   to  expect  someone  hear me   and  help  me?   is  this   just  for   trade   or    help  customers    to  solve   problems  they  meet...ı   want  apple  professionals    hear   and  help  me  !!!  what  can  ı  do?    all  were   done  properly  but   when  ı   enter  yahoo  lounge   and  attemp  to    join  a  table   ,   it  quits   and    ı  cant  join  then  it  says  error  lodging....can  someone  help  me  ,  pls  urgent  !!!!

  • After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov

    After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?

    After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
    Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

  • Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

    Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop

    Why does the old iphoto library still remain after the upgrade? Takes up HUGE space on my laptop
    Actually, it only looks like it takes up additional space. The file size shown is misleading.  When you migrate an iPhoto library to Photos, both libraries will show the media files using hard links. The actual file content of the image files and videos is shared by hard links:
    See this linked document:   Photos saves disk space by sharing images with your iPhoto or Aperture libraries - Apple Support
    You will gain no free storage at all by deleting either the iPhoto Library or the Photos library.  So keep both libraries until you are very sure, that Photos is working well  on your Mac and your iPhoto library has been migrated correctly. Also, check, if you like the workflow in Photos. It is very different from iPhoto and some iPhoto features are not supported.
    There will be no easy way back to iPhoto, if you delete your iPhoto library or the iPhoto application. Apple does not sell it any more.

  • Why mouse arrow disappears after I upgraded to osx Mavericks

    why mouse arrow disappears after I upgraded to osx Mavericks-==

    After I upgraded to Mavericks, Quicktime has had to convert MPEG-4 videos to .mov.... Why? Is there a way to stop that or to change the settings?
    Your question requires more information. What does MPEG-4 mean to you? What file container and which compression formats are you referring to here? Is the MPEG-4 content "standard" or proprietary. Basically, depending on the file container and the specific content, QT X v10.3 may initiate a conversion ever where the individual data tracks are fully QT compatible. Proprietary compression formats will definitely do this. In some cases, the audio or video in one source container may simply be passed through to the MOV file while in another source container, QT X v10.3 forces a conversion of that same data track. In short, there are too many variables at this point to properly answer your question or attempt to duplicate your workflow.

  • X crashes with YouTube video pages after xf86-video-intel upgrade

    X crashes when trying to view a YouTube video page after the last xf86-video-intel upgrade. I think it happens with other websites as well but most of them work just fine. If I downgrade xf86-video-intel to the previous version the problem is gone.
    Xorg.0.log shows:
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x3b) [0x809d93b]
    1: /usr/bin/X (0x8048000+0x5cc55) [0x80a4c55]
    2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb77fc40c]
    3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb7275000+0x3458e) [0xb72a958e]
    4: /usr/bin/X (0x8048000+0xacc80) [0x80f4c80]
    5: /usr/bin/X (0x8048000+0x93c97) [0x80dbc97]
    6: /usr/bin/X (0x8048000+0x94b3f) [0x80dcb3f]
    7: /usr/bin/X (0x8048000+0x402e7) [0x80882e7]
    8: /usr/bin/X (0x8048000+0x1a685) [0x8062685]
    9: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7418b86]
    10: /usr/bin/X (0x8048000+0x1a271) [0x8062271]
    Bus error at address 0xb5fe2000
    Fatal server error:
    Caught signal 7 (Bus error). Server aborting

    Confirmed. Same behaviour here.
    EeePC 901, xf86-video-intel 2.10.0-1.
    00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
    Backtrace:
    0: /usr/bin/X (xorg_backtrace+0x3b) [0x809d93b]
    1: /usr/bin/X (0x8048000+0x5cc55) [0x80a4c55]
    2: (vdso) (__kernel_rt_sigreturn+0x0) [0xb771340c]
    3: /usr/lib/xorg/modules/drivers/intel_drv.so (0xb71a6000+0x3458e) [0xb71da58e]
    4: /usr/bin/X (0x8048000+0xacc80) [0x80f4c80]
    5: /usr/bin/X (0x8048000+0x93c97) [0x80dbc97]
    6: /usr/bin/X (0x8048000+0x94b3f) [0x80dcb3f]
    7: /usr/bin/X (0x8048000+0x402e7) [0x80882e7]
    8: /usr/bin/X (0x8048000+0x1a685) [0x8062685]
    9: /lib/libc.so.6 (__libc_start_main+0xe6) [0xb7343b86]
    10: /usr/bin/X (0x8048000+0x1a271) [0x8062271]
    Bus error at address 0xb5a4d000
    Fatal server error:
    Caught signal 7 (Bus error). Server aborting
    Last edited by hw-tph (2010-02-13 12:32:51)

  • Video files won't open on iPhotos after library upgrade

    I tried accessing my iPhoto library today on my iMac, and received this message "The photo library needs to be upgraded to work with this version of iPhoto".  I selected the "Upgrade" version accordingly.  At the same time, I also did an update on iphoto to version 9.5.1. 
    After these upgrades were completed, I attempted to access my albums in iphoto.  Everything looked fine, except that I can no longer view any videos!  When I try to view a video, this error message appears: "A necessary data reference could not be resolved" and the screen is just blank.  What do I do? This is really upsetting because I have videos of events and people important to me who have passed away 

    Hi Terence, thank you for your response.  The problem is that when I go back to Time Machine, I am unable to even restore to an earlier version.
    When I attempt to open my video files and receive the error message "A necessary data reference could not be resolved", I went to "File" - "Reveal in Finder" - "Original File", but then received the message "QuickTime Player can't open "IMG_1929.MOV". 
    Is this a virus or bug that subsequent updates will fix, or are my videos lost forever?
    Thank you.

  • Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    Why can I no longer use my headphones remote to fast forward or rewind music videos on iPhone since upgrading to ios7?

    The YouTube app is not included in iOS 6 (I think because the licensing agreement with google ended). You will either need to try one of the YouTube apps from the store (there is an iPhone optimised app from google, and other people have said that they are working on an iPad version), or (if this isn't the version that you have tried) try accessing the mobile version via Safari : http://m.youtube.com (you can create a home screen shortcut for the site)

  • After Mavericks upgrade I lost  the current I Movie project I was working on.  All that is left is the video clips, no photographs, music, transitions or titles. Three weeks work gone!

    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.

    rob2433 wrote:
    I upgraded to Maverick from Mountain Lion.
    I also upgraded the various Apple Software applications that appeared after the upgrade to the operating system.  I opened I Movie to continue work on a project I was working on and as requested I allowed I Movie to update the projects  to allow it to work with the upgrade.
    As it was doing this a dialogue box came up showing an error had been encountered and advised me to quit I movie.  I did this and when I reopened it the project I had been working on had lost all of the photographs, music, transitions and titles.  All that was left were the thirty-seven video clips and nothing else.  Where has all my work gone and how can I retrieve it.
    It should still be on your backup drive. Try reimporting it.
    Pete

Maybe you are looking for