No VIs listed for VI option in "Configure Open FPGA Reference"

I have a cRIO and I was using the Open FPGA Reference function to load a bitfile by specifying the VI name.  This was working fine.
I have been compiling all day, and I just deleted a control and then changed a DMA FIFO datatype.  When loaded and ran calls to the FIFO returned an error.  So I tried refreshing the VI specification, but now when the dialog comes up, there are no VIs listed.
No idea what's wrong here.
Solved!
Go to Solution.

1) I commented out the FIFO when I compiled (forgot to switch it back on); so that's why the error occurred.  Whoops.
2) I still don't know why I could not browse for the VI, but I was able to drag and drop.

Similar Messages

  • Need to download Global address List for Kiosk user while configuring Outlook using POP3 setting

    Hi,
    We have configured Kiosk User in Outlook using POP3 setting but we are not able to see the GAL in the Outlook Client.
    Kindly whether there is options to download the GAL using LDAP query in Exchange Online.
    An answer would be of great help.
    Regards,
    Manoj Issac

    Hi Manoj,
    POP3 was designed to support offline mail processing. With POP3 protocol in Exchange, client user can send and receive message from Exchange server. But POP3 doesn't offer advanced collaboration features such as calendaring, contacts, Address
    Book(GAL) and tasks.
    Therefore, the POP3 client can’t access address book. It is recommended to use MAPI protocol to connect to the Exchange server. For external user, the users can also use Outlook Anywhere or OWA to access the mailbox with better Exchange features
    experience.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Can i assign a collective srch help for select option in list display

    can i assign a collective srch help for select option in list display

    Hi,
    Yes ,u can assign a collective search help for select-option in list display.
    Eg:
    Define your select option like this
    SELECT-OPTIONS: s_vbeln FOR likp-vbeln MATCHCODE OBJECT vmva.
    Regards,
    Shiva.

  • My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

    My mini with IOS 7.0.6 is not showing an option for wish list in the options. What is happening?

    The three Rs to IOS, try them in order until the issue is resolved;
    Restart - Press and hold the Power button until the red Power Off stripe appears. Swipe to power off. Press and hold the Power button to turn the device back on.
    Reset - Press & hold the Power and Home buttons simultaneously, ignoring the red power off slider, until the Apple logo appears. Then release both buttons.
    Restore - Connect the device to the Mac or PC with which it is usualy synced and use the iTunes app to restore the device to the factory settings. You can then restore the device with a previously made backup or set it up as new.

  • HT2518 I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer.  Any1 else have such a plm?  If so, how did you resolve?

    I'm in the process of transferring files fm pc to mac, all connections verified and migration asst is working. HW, my outlook contacts nor email are listed as an option for transfer.  Any1 else have such a plm?  If so, how did you resolve?

    I used O2M from http://www.littlemachines.com to move from Outlook to Apple Mail.
    Richard

  • I have a visa card for Zambia and there is no option in your countries that allow you to pay from Zambia. Please advise what I can do?

    I have a visa card for Zambia and there is no option in your countries that allow you to pay from Zambia. Please advise what I can do?

    TomWolves
    I would do another rename to disable or just delete all the OldFilm.AEX and OldFilm.AEXOLD in that NewBlue Folder.
    If you do, please let me know if that OldFilm.AEX regenerates itself the next time you open Premiere Elements 13.
    Here is the strange story...at least from my Premiere Elements 13 Windows perspective...never had the No Disc error issue
    Here are some details to sort through trying to figure out why you have 2 OldFilm.AEX file in the NewBlue Folder.
    1. The original OldFilm.AEX file of Premiere Elements 13 has the date of 9/4/2014 (just before the version was released on 9/24/2014).
    After the 13.1 update is done (whenever date), that OldFilm.AEX file has the date of 1/31/2015. I first saw notification of the 13.1 Update
    release early in February 2015.
    2. Now in Premiere Elements 13.1, if I take my OldFilm.AEX (date 1/31/2015) and disable it by renaming it to OldFilm.AEXOLD, close out of there, and reopen
    the program, the OldFilm.AEX is not seen to regenerate. The OldFilm.AEXOLD remains there as its lone self.
    3. So, I am thinking that your OldFilm.AEXOLD in the screenshoot is "original equipment" that you disabled to get rid of No disc error.
    Why the OldFilm.AEX is there also is not clear, but the dating on it suggests that it came along with the 13.1 Update.
    Bottom line: let us try the deletion or disabling one more time and see what happens.
    Looking forward to further reports on your findings, as your time permits.
    Thanks.
    ATR

  • Where is the list for certified configurations?

    Where is the list for certified OPS configurations. I am also looking for the list of certified distros. According to the docs, this list is available, but WHERE IS IT!?
    TIA
    Jared Cook
    null

    <BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Rankin ([email protected]):
    Metalink<HR></BLOCKQUOTE>
    O.K., for those of us who want to make sure it works before buying a support contract, how can we access this information? Metalink as you know is only for "paying" customers.
    Thanks,
    Jared Cook
    null

  • Error in eRecruitment configuration step Define user list for support teams

    Hi Erecruitment experts,
    I am new to SAP Erecruitment and trying to get the system running in ERP 6.00 with EP7.
    When I progress the customising steps under technical settings -->User administration --> Define user list for support teams, I am facing problem of ABAP Dump.
    It says
    Error in the ABAP Application Program
    The current ABAP program "SAPLHR_RCF_CUST_01" had to be terminated because it
    has come across a statement that unfortunately cannot be executed.
    Key words are
    "MESSAGE_TYPE_UNKNOWN" " "
    "SAPLHR_RCF_CUST_01" or "RCF_CUST_F01"
    "CHECK_VALID_USR"
    I think there is a link between Object types CP, BP and relation ships A650, A209 etc in this process.
    Can some one guide me how to overcome this error.
    Tks
    Dhina

    Hi all
    I got them fixed, as they are due to BP creation integration issue.
    Thanks and regards
    Dhina

  • I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India. Once i am back to India, will my iMac be covered by the Apple's Protection Plan?

    I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
    I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
    Waiting for response from the support group members...

    Thanks Ralph
    This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say?

  • Sorting of CTO Options in Configurator UI

    We currently have OM Use Configurator profile set to Yes. We do not currently publish bills/models into configurator, and rely on the default UI presented for configurator. We would like alphabetical sorting by item number for the options when we expand option class nodes.
    1. Can we influence the order of options listed in some way other than the BOM order without publishing bills/models and using OCD?
    2. If not, what is the recommended approach to sorting options alphabetically?
    Thanks,
    Joel

    Hi Joel,
    BOM Options will be displayed (if they are effective) as per the Item Sequence order defined in the BOM.
    If you want to display the options alphabetically sorted when you click on the option class, you can think of writing a Configurator Extension using CIO APIs. But for this you have to use OCD & publishing of models will be required.
    Regards,
    Hemanth

  • Lotus Notes Missing in Drop Down List for Calendar Synch

    Hello there,
       A) I am attempting to synch my blackberry tour with my calendar in Lotus Notes 8.5.2.  I was able to previously synch my calendar when I had Lotus Notes 8.5.1, but since our upgrade to 8.5.2, I get an error saying it could not find a supported version of Lotus Notes. 
      B)  When I try to go in and configure the organizer section of the desktop software, there is no option for the drop down list for Lotus Notes.  I have tried uninstalling, rebooting and then reinstalling (based on info from other posts), but none of that seems to work.  I have checked and all the connectors are there, but for some reason, they are not being recognized.  Is there some specific key or file that intellisynch is looking for to know that Lotus Notes is installed on the machine?
    Now, I am assuming A&B are symptoms of a common problem, but I am at a loss as to how to move forward.  Any ideas on how I can get this software to recognize Lotus Notes?  I appreciate any help you can give.
    Thanks,
    Rick

    While calling method SET_TABLE_FOR_FIRST_DISPLAY pass 'A' to paramater I_SAVE .
    CALL METHOD grid1->set_table_for_first_display
          EXPORTING i_structure_name = 'SFLIGHT'
                    is_variant       = gs_layout           
                    i_save           = 'A'
                    i_default        = p_def
          CHANGING  it_outtab        = gt_sflight.

  • How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

    Hi All,
    I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
    this issue?
    Thanks  in advance! 

    make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
    check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
    another option to put pause in right place:
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • The report options under "configure" and CSV or xls.

    The report options under “configure” does not give .csv or xls as options. Instead of using vi to pass data to database, is there a simple way to transfer all the results (just like the way in the report that automatically generated) to .csv or xls...
      Thanks.

    Hi,
    in order to modify the report generation, you have to understand the way how TestStand works in regard of the report generation.
    There is a tutorial which explains this which you can find here. But please note that the tutorial is currently undergoing an improvement process. 
    The reason that the report options don't give you the option for xls or csv as report is: 
    Neither xls nor csv are predefined. So for example measurement values in xls can be placed in a special worksheet or included in a main sheet in a certain column.
    hope this helps,
    Norbert 
    CEO: What exactly is stopping us from doing this?
    Expert: Geometry
    Marketing Manager: Just ignore it.

  • How do I set numbered lists for headings in Pages 5.2, and keep that system of numbered lists saved?

    I have tried to set numbered lists for headings in Pages 5.2 but have not succeeded. I have read similar questions concerning this but this has not helped me...
    When I say numbered lists I mean something extremely important and simple, for instance:
    1. Introduction
    1.1. Background
    1.2. Purpose and Questions
    2. The Legality of Clause X
    2.1. Legality under Article 101.1
    2.2. Legality under Article 101.3
    And so on...
    Heading 1. is selected as "Heading", 1.1 is selected as "Heading 2", and if I had 1.1.1 it would be selected as "Heading 3" and so on...
    I have navigated my way to the Format window, and under the tab "Style" and down to "Bullets & Lists". I have here selected the following: Numbered, Numbers, 1. 2. 3. 4., Tiered Numbers, Continue from previous.
    There are several problems with this currently.
    First, based on the example it becomes "2. Background" when it should be "1.1 Background" instead.
    Second, after writing some body text between the headings and then select a new heading, all the previously selected settings I mentioned above in "Bullets & Lists" have to be reselected.
    So, how do I set numbered lists for headings, or so called sub-headings, in Pages 5.2? And how do I keep that selected system of numbered lists saved so I don't have to retype it for every new heading I type? (e.g. so that Pages knows that every time I choose Heading 2, I want it to number the heading in the way selected)
    Obviously, manually writing the numbers for every heading is not a viable option, as it makes table of contents problematic and is simply tedious. You need an automatic way of doing it, especially if you write long documents where keeping headings in order is absolutely essential.
    Also, reverting back to previous Pages versions (like v. 9 I think?) is not an option as that does not exist on my recently purchased Macbook Pro.
    I need to be able to do this on Pages 5.2 and do it automatically.
    I appreciate any help with this.

    iWork '09 is not "outdated" it still works and works extremely well and whilst not perfect with MsWord it is far far better than Pages 5.2 which has a stream of major issues with exporting. It is also way better and faster to use than Microsoft Office.
    So what is your time and work actually worth? If it is less than $19.99 for 6 months, you may as well just chuck it in and take that job on minimum wages.
    You are assuming things for Office 2014 with absolutely no inside knowledge. Much as we assumed Pages 5 was going to be the long awaited improvement, but ended up being a downgrade to match the iOS version, Microsoft is headed the same way with their mobile versions.
    This is not like getting the "latest" pair of pants where you go with the crowd and throw out your cigarette legs which replaced the flares, which replaced your low cuts which replaced your cigarette legs, which replaced…
    This is work.
    If it does the job and does it well, use it. There is nothing out there to really match what Pages '09 does. Yet.
    LibreOffice can do most but not all, but has a UI that only a mother could love. It's great redemption is that it uses both open formats and the standard Microsoft formats and is under active development. It also opens and saves to just about everything. When they finally work out the Pages formats, I'm sure they will open those as well.
    I use a lot of professional software. Just because the publisher's marketing department says change the product so we can sell more, doesn't mean you have to pay any attention whatsoever. Adobe being a classical example. Most designers are just ignoring their latest subscription based bloatware and getting on with their work.
    Peter

  • Change Request Management  "There is no task list for this project"

    Hello!
    I would like to use the functionality of CharM in SOLMAN 4.0.
    When I enter the Tcode /n/tmwflow/proj I receive the waring/error "There is no task list for this project" (/TMWFLOW/TRACK_N114)
    If I create my own task list via Task list --> create
    I get the warning "You cannot change task lists in the SAP namespace"
    What are the steps to define task list for my project?
    Do I need to configure SPRO ... --> Extended Configuration --> Schedule Manager?
    The second warning I get: "NO CTS projects created yet" or
    "The Solution Manager project does not have an active CTS project yet".
    How can these warnings/errors be corrected?
    Thank you very much!
    regards

    Hi,
    Pls click the check button(next to activate button)
    see the SLG1 log generated remove the errors shown in red.
    One it is done u press the refresh button & thn u cn create the task list
    chk
    https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
    /people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
    http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
    Regards
    Prakhar

Maybe you are looking for