Nokia 6120 headphone, just plug and listen?

Hi there. I'm tryin to listen to my music on music player through the stereo headphones but the sound only comes out on the phone handset itself?! am i missing something? the radio works, the sound is coming off the headphones. thanks

Maybe there was a bad connection between the headphones and the phone.
Randomly on my old N73, I was sat on the train and I though oh someone's listening to the radio i'm listening too.. but nope.. weirdly something had turned the loud speaker on (even though it was locked in my pocket). Took the headphones out and plugged them back in, didn't happen again.
Owned: Nokia 3510i, Nokia 3120, Nokia 6230i, Nokia 6233, Nokia N73, Nokia N82.
Current: Nokia N900!

Similar Messages

Help! my nokia X3-02 just restart and now it have ...

I was in the web and it just restart after a blink and that has happen to me a lot of times but this time when it restarted the menu now is like the old nokia menu and i try to update my software but i cant and a window say "error -2146435037" I try to search for it and theres isnt any information about that. I put the memory status of my phone and it has nothing 0.0kb it says. So please help!!

Hi,
Sorry to hear that still it does not work.
Can you update now?
Please try to update your phone even with the same sw if new is not available.
If it still the same, i think it is best to visit Nokia Care Point in your area.
To find your nearest Nokia Care Point, visit http://www.nokia.com/support and select the Repair page.
Br
Mahayv

When I plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I cant hear anything.

When i plug my headphones into my Ipod touch and listen to music, the volume automatically reduces slowly so I can't hear anything. Please help.

Thank you. That is good information.
Does this mean that there is nothing I can do about the delay? When I think of a delay, I think of maybe 10 seconds. I am having to wait for a minute or more for my audio to switch. While I wait, I have no audio and any audio program hangs. Is there a setting I can change? It seems rather ridiculous that I have to wait so long just to switch from internal speakers to headphones.
It is like this on other Mac machines? Or it is just my iMac? I hate to compare Mac to Windows, but on Windows or Linux computers the switch is instantaneous.

I just plugged in my Iphone after 4 weeks of downloading music and adding contacts around 400 to be excact and it whipped all my data out and I have no photos nothing reset to factory defult and I cannot even listen to music I purchased because it skips

I just plugged in my Iphone after 4 weeks of downloading music and adding contacts around 400 to be excact. When I plugged it in my computer it started to sync with iTunes and it whipped all my data out. I have no photos contacts nothing, so I then in a rage reset to factory defult and I cannot even listen to music I purchased because it skips. I just want my phone back

Was this the very first time you ever plugged the phone into that computer?
Did you pay attention to the prompts you were given when you plugged it in?
Did you have iCloud backups turned on before you did this? I hope so... If you did, restore the phone from the last iCloud backup from before you wiped it. If not, then the photos, etc. are gone. Apps and music can be re-downloaded.

Just want to plug in my iPhone and listen to the music on it!

For the first time I have attempted to plug in and listen to music on a computer that my iPhone is not synchronized with. On my laptop I use for work the phone plugs in and mounts but I can't play anything. I'm running I tunes v8 on both of the computers involved. (iMac / MacBook Pro)
Is it really true I can't listen to the content on my phone? Software bug?

There is no disk mode on the iPhone so your work computer cannot directly access the music. This is part of the closed system on the iPhone (remember, originally there was no 3rd party software) to try to protect the iPhone. No one here knows if they will ever change this.
Make your wishes known: http://www.apple.com/feedback/iphone.html

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus. Here is my issue. On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus

I have had IPhones since their inception. Last phone was the 5. A few months ago, I upgraded to the 6 Plus.
Here is my issue.
On my 5, my car radio (which has USB port) allowed me to plug in and listen to radio or music from my phone and the bonus was it charged the phone as well. All worked great.
Now with the 6 Plus, neither of things work. The message on the radio (Kenwood) says I Pod error. The message on my phone say's "this device is supported".
I have called on this before and was told you are aware and that the issue will be addressed in a future update. There have been several updates on IOS 8 and the issue remains.

I have a Kenwood KDC-X695. When I purchased this stereo and had it installed, I had an ATT iPhone 4.
It worked with the stereo, but had a few issues. I had purchased a few audio books that I would listen to while driving. When I plugged it in it would immediately begin to play the book from the beginning or if I had been listening to music, it would start playing the song that was at the top of the song list.
The stereo came equipped with Firmware version 3.05. I upgraded to the iPhone 5 a year later. I had that phone for approximately 2 years. The song or book issue remained the same.
I just recently upgraded to the iPhone 6 and the Bluetooth function still works, however the USB port on the stereo that the phone plugs into to allow files on the phone to play through the stereo no longer works.
I contacted the service provider (Verizon) and after speaking to several different technical support technicians, they provided me the phone numbers for Kenwood and Apple because they were unable to help me.
I spoke with Kenwood technical support the following day and after a few fumbling miscues from the technical advisor, it was suggested that I upgrade the firmware, even though the Kenwood literature warns against this if the Bluetooth portion is working, because if there is a problem with the upgrade, it can render the Bluetooth useless and non-functional. The advisor did suggest the latest firmware on the second or third attempt, after I pointed out what I was able to glean from my initial search.
Later that day, I went back to the Kenwood site (from their homepage) and by using their selection tools, discovered that this particular model was only ever intended to be used with the iPhone 4S (the technical advisor was not aware of this, even though I mentioned this during my phone call earlier in the day). According to the Firmware selection tool, my iPhone 5 should not have worked with it.
I performed the Firmware upgrade, and it took 13 minutes. This was less than the 15 minutes that was forecast in the Kenwood literature. The Bluetooth still works but the USB cable connection still causes the unsupported device message that I received prior to the upgrade. I am incredibly annoyed and disappointed.
By upgrading to the iPhone 6, I have three choices; (1) only use the Bluetooth for phone calls without the ability to play other files from my iPhone 6 (2) forced obsolescence of my stereo, requires buying a new stereo (3) return my iPhone 6 and go back to my iPhone 5.
I do not believe that I should have to be a software/Firmware/hardware engineer, vetting every single device that I own; prior to upgrading a cell phone.
I am incredibly annoyed with Apple at the moment.
I have a separate Bluetooth headset that worked with both my iPhone 4 and iPhone 5 that the iPhone 6 simply does not recognize. That is another story for another time.
Currently, I am incredibly underwhelmed with Apple.

Can't I just plug in the ethernet and go?

I thought imacs were easy. I've been reading on here about these people have problems connecting to the internet, and when I read on the set-up pages, it's like you have to have a lot of information (dns, isp, etc...) to put in. It kind of seems complicated. I was hoping it would work with any pc I've ever had; I would just plug the ethernet cable running from my linksys wrt54g version 2.0 which is hooked up to my cable modem. And it would just work. Tell me these are random cases of people having problems and I can just plug in my ethernet and it will work and maybe even detect the wireless connection on its own. Which I'll run it wired because I have the cables and it's not a problem to. Shine some light on me. - Thanks.

It's almost always plug-and play for wired ethernet. That is to say, most people use a router that has DHCP which will permit your machine to automatically configure itself. With wireless it may be a little more complicated in that you need to know the name of the router you want to connect too (they have names because there could be several in the area) and what encryption method and key is used (because you're transmitting over radio, so no encryption would mean anyone close enough can listen in).
However, even when you use a wired network, there are times where you're going to want to not have the machine automatically use setting provided by the router but rather specify your own. For example, if you want to access services on your Mac from a machine elsewhere on the Internet, the Mac will need to have a fixed IP address and the router will need to be told to forward those requests directly to your Mac.
This is not a Mac-specific situation either. The exact same holds for Windows and Linux as well. All of them are simply plug-it-in-and-it-works until you want to do something special, in which case you need to now how to tell it.

Problem in listening music from nokia x2 headphone

i am unable to listen music via nokia x2 headphone,though there is no problem in listening music via headset(loudspeaker).Voice is tooooooooooooo low via headphone.
plz help me out.

have you tried adjust the volume when listening and are the headphones inserted correctly you should see a headphone icon on screen
If i have helped at all a click on the white star below would be nice thanks.
Now using the Lumia 1520

Strange noises when ipod touch power plugged and headphones cable connected

Hi everybody,
this is my first post. It has been annoying me for a long time now.
The thin is, when I plug in the ipod via charger or USB cable and I want top listen to music while it charges i get this crackling noise and a high pitch one as background atmosphere which is ok if you listen to loud music but very annoying if you listen to calm music.
I want to connect it to my stereo and i found out that when I disconnect the power cable its allright. When I put the audio cable on the metal sufrace I just get the crackling noise without the pitch and when its plugged into usb and connected to my ipod I can modify the noise when i scroll on the touchpad. Its like scraching on vinyls but not cool.
I don't know what to do. I mean sometimes you want to listen to music AND charge your ipod right?
Has this happend to anyone?
Best regards

Well thanks for pointing me to that feature, I didn't notice it before, but nobody there really has the same problem.
They are complaining about not being able to charge and listen at the same time. This is histroy since iOS5.
I shure can listen to my music. And for example via bluetooth its no problem being connected and listen to music, even while I sychronize. But if I plug in the audio jack, and have the ipod charging I get this noises.
I hope the problem is now more precisely described.

My volume doesnt work and when i press the volume button it shows the headphones volume on the screen without any headphones being plugged in. what can i do to fix this?

My volume on my iPad doesnt work, when I press the voulme button it shows the headphones volume on the screen without any headphones being plugged in. Is there a fix for this?

Try going to settings> general > reset> reset all settings. If that doesn't work. Place a headphone jack in there and just pull it out a couple times. The problem is either your iPad setting is stuck or there is actually a hardware problem and moving the jack in and out might fix it

Ive just plugged my phone into my computer and it has synced automatically with i tunes,i tunes has removed virtually all the apps and now wont let me sync them back? it comes up saying ibooks could not be uploaded to your device?

i have just plugged my i phone 4s into my computer and it automatically synced with i tunes, i tunes for some reason removed all the apps and backed up my phone automatically. ive gone to put my apps back on and its showing me an automatic flash up message saying, i tunes could not upload ibooks onto your device,it must be authorised. Im signed in and im also authorised, ive de authorised and authorised my account now twice.ive deleted the app i books as i read it could be out of date now and still it wont let me sync my apps. its letting me sync some apps that i bought on my new phone and not my 3, i also had an old e mail address registered with these apps and this account but hotmail deleted it for some random security reason. i have also bought an i pad recently and that works fine with my i tunes.can anybody help me as i have an i phone 4s now with nothing on!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! this new i tunes is crap!!!!!!!!!!!!! never had problems before,all i did was change my e mail address last time and everything was fine with the old version!!

Downloading past purchases from the App Store, iBookstore, and iTunes Store

My ipad asks me repeatedly if I want to "trust this computer" whenever I plug it in to my desktop PC and I can't get it to just connect and be able to sync or access files.

Whenever I plug my iPad into my desktop PC (windows 8.1), the "trust this computer?" popup keeps displaying on my iPad. I tap it but it just beeps and a few moments later it shows up again. Meanwhile, itunes keeps giving me error messages and giving me the message "Do you want to allow this computer to access information on this ipad?" I click continue but the ipad keeps giving me the trust this computer message every 3 seconds. I've never been able to sync this ipad with my computer yet because of this problem. Any suggestions?

I finally was able to solve my problem. I'm not sure why it happened but after updating my iPad to the most recent iOS, it works just fine. I had iOS 8 before, but it was the first release, not the update. I have the latest iTunes on my computer so maybe they weren't compatible. Anyway, if anyone else is having this problem, make sure everything is up to date.

HT4623 I just plugged my iPhone into my Mac. I had updated my phone system and lost all the info on my calendar. I was going to see if I had updated in iTunes before I updated, but when I plug my iPhone in a pop up says "The iPhone cannot be used because

I just plugged my iPhone into my Mac. I got this pop up - The iPhone cannot be used because it requires iTunes version 11.1 or later. Go to www.itunes.com to download the latest version of iTunes. I went to the address and updated my Mac but the pop up still comes up - I can't find out if they mean my iPhone needs to be updated or how to update it if that is the case.

Hi RileyAvaCadenRiver,
If you recently updated your iPhone to iOS7, you will need to update iTunes on your computer to iTunes 11.1 or newer for it to correctly recognize the iPhone. You may find the following link helpful:
Apple: iTunes 11.1.1
http://support.apple.com/kb/DL1614
Regards,
- Brenden

When I plug my ipod touch into the computer it just charges and won't appear on itunes!

when I plug my ipod touch into the computer it just charges and won't appear on itunes!

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

New iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?

I have a new iMac 27" and just plugged in a Apple USB superdrive and get message, "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I am trying to load Office mac2011 what to do?

If you just bought the iMac and the Sjuperdrive take the superdrive back and get a refund. The by any other brand external DVD drive that connects by USB and try that. Most come with a Y USB cable to allow you to connect to 2 USB ports to supply enogh power to the drive IF Needed.
Or take both back and get a refund on both, you have 14 days to return it no questions asked, and buy another iMac and some other brand external DVD drive.

Nokia 6120 headphone, just plug and listen?

Similar Messages

Maybe you are looking for