Nokia E55:: Switch between the 2 writing languages

Hi,
Does anyone know how you can switch between the primary and secondary writing language while writing text on the Nokia E55?
The manual does not state something...

can you see a flag on the top right corner if you click on that you can switch between the keyboards you have installed on your system

Similar Messages

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

I'm using apple's bluetooth keyboard and I need an easy way to switch between the text and numbers fields instead of tapping on the screen

While not in edit mode:
- if start typing numbers, then it enters number mode.
- if start typing text, then it enters text mode.
Using the arrow keys exits edit mode. So this should work for you:
1 Type text into a cell, which enters text mode.
2 Press Return to move to the next cell.
3 Press right arrow key to exit edit mode.
4 Press left arrow key to get back to the cell.
5 Type a number, which enters number mode.
Another method that requires more planning ahead of time is to format the cells as text or number before starting the data entry. Then when you navigate to a cell while in edit mode, you will be in the appropriate mode (without having to exit edit mode).
This all works fine for me. Hopefullly it does for you also.

Switching between the firewire connection and USB 2.0 Connection

Is it possible to switch between the firewire connection and USB 2.0 Connection on a portable external hard drive? I've tried unsuccessfully to use the firewire connection on my external hard drive after using the 2.0 connection. No machine will read the drive if it is connected via the firewire port. Using USB 2.0 it works as intended.

Hello Grizzly Marmot,
Thank you for the feedback. So probably my old MAXTOR enclosure is playing me tricks ....
Last night the backup on my USB 2.0 was terribly slow ??? The incremental duplication of my hard drive (372.9 MB of data from 35GB of complete data) gave me these stats:
Copied : 6232 files, 372,9 Mo
Average : 8,8 Mo/minute (4,5 copying, 148,1 verifiying)
Just to analyse the drive it takes ±45 minutes ??? Also could the energy saving mode be a slow down factor (the suspension of the computer is NEVER) ???
I still wonder what speed I could experience for a wireless backup to a NAS drive ??
Thanks for helping.
Robert

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and

If I have an airport extreme and a time capsule is it possible for seamless switching between the 2 when a signal is weak or drops
Main reason is as I move from my first floor to my attic office and would like to place one (airport extreme)downstairs and time capsule upstairs to get complete coverage

In theory, yes. If you configure the two base station into either an extended or roaming network configuration, you should be able to walk a laptop between routers and the laptop should attempt to connect/reconnect to the base station providing the stronger signal ... but, in reality, this is not always 100% true.

Is there a shorcut to switch between the differents groups of tab in firefox 4?

Is there a shorcut to switch between the differents groups of tab in firefox 4 without seeing the panorama?
Or how can I create this?
Regards
Tetramonium

Is there any way to change these shortcuts?
Since I'm using a '''Belgian keyboard''', the only way to type ` is to use the combination of AltGr + ` + followed by a space...
This makes it impossible to use CTRL+` to change Tab groups.
Thanks already for your tips!

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

Is it possible to connect an older Power Mac (running OS 10.5.8) to an iMac running 10.9.5. I want to share the monitor, keyboard and mouse and switch between the two computers.

as far as I know then the target display mode is not an option with such an old mac

Switching between the Classic View and the Tree View in transaction FEBA

Hi All
I would like to know how to switch between the Classic View and the Tree View on transaction FEBA for post processing of bank statements. I have a scenario where in the DEV client the transaction is calling up the Tree View and in my QA environment it calls up the Classic View, and I would like to know if there is a way to easily switch between the two views.
I'd appreciate your assistance.

Hi,
I think you can do the same using transaction codes FEBA and FEBAN.
Thanks
Aravind

How to? switch between the following mission control preference "group windows by application" on the fly? OR have both readily available

Is there any way to switch between the following mission control preference "group windows by application" on the fly? I would like to turn this feature on and off quickly. OR have both readily available?
If osx 10.9 does not support this, does any one know if automater can be used to creat a short cut to turn this preferance on and off?
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.

4u2nv247 wrote:
Current solution (not much of a solution)
I currently added the preferance control icon for mission control on my dock.
Do you mean the general System Preferences icon? ...If so, it's possible to put the icon specifically for the Mission Control pane in the Dock:
I'm on Mountain Lion and that Preference Pane is in: Macintosh HD > System (not Users) > Library > PreferencePanes > Expose.prefPane
...Drag that Expose.prefPane to the right-hand side of the Dock, say, next to the Trash. Then you can simply click on the resulting Expose Prefs icon in the Dock to open its Prefs panel.

Master is always switching between the same two members.

Hi all,
We have observed that our replicated environment, is always switching between the same two members even though there are other members with more cpu power.
As said on message {message:id=4169549}: "+In the event of a tie, an arbitrary, but predictable attribute is used to break the tie. In the current release, that tie breaker is an implementation artifact, and is not available through the public API.+"
I know the availability of "je.rep.node.priority" property but, is it possible to set a custom tie breaker or add some king of randomness to the default tie breaker?
BR,
/César.
Edited by: Cesar Alvarez on 04-jul-2011 18:05

Cesar,
No, currently there is no way for the application to influence the election, except through the use of je.rep.node.priority. However, is it possible to use node priority to achieve your goals? If use a positive priority value for all nodes (and avoid using zero), elections would make this choice:
- first consider nodes with most recent log files as master candidates
- node priority used as a tie for those most-recent nodes.
Since node priority is mutable, you could even change the node priority randomly on each node, which is rather awkward, but would work.
Out of curiosity, could you tell us your motivation for injecting some randomness into the master selection? We understand that some nodes have more resources and should be higher priority, but have not thought about why randomness would be useful.
Linda

HT1918 hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

hi I'm travelling between two countries and i have a credit card and address in both, can i set up my itunes account to switch between the respectice i tunes stores

Not a single account, no, at least not easily. It would be better to set up individual iTunes Store accounts, one in each country. Your computer and devices can quite happily deal with two accounts, and then you can just log into the appropriate account when you're in the applicable country. You'll need a second email address to able to create a new Apple ID.
Regards.

PCUI - Pop-up "save changes" appears every time we switch between the list

Hi Experts,
maybe you can help me with the following issue:
We work with PCUI EP 7.0 and CRM 5.0 and if we start a pcui application (Salesorder for example) and open the
enhanced search, put some data in the search criterias and then press search - the system gives us the "save changes"
pop-up?!? The same behaviour occurs if we switch between the list and the detailed view - and we haven't done any changes
Do you know this problem and do you have a solution for this?
regards
marc

Hi,
This pop up is related to the WorkProtect mode,
It will be configured in the portal,
There will be 3 options available
if Workprotect mode is 0--- then navigate automatically
1-- pop up and then navigate
2- navigate with out saving.
i'm not sure about the values.
WorkProtect mode can be seen in the personalize link and this link is available if eu_role is assigned to the corresponding user.
Please contact portal admin team regarding this.
Anilkumar

How do you scroll up and down on the library and playlists? I can only see an up arrow at the top of the first column on the left and it only switches between the top 28 songs and the bottom 28.

How do I scroll up and down playlists and library on the new iTunes format.? When I ckick on the arrow in the box at the top of the far left column it only switches between the top and bottom 28 songs.

Hi
I looked at the specs for your laptop and there is no HDMI out port for this model but RGB & Headphones out jack should work. Here is the link for closeup views of the ports.
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?modelFilter=L555D-S7005&rpn=PSL...
Click on product tour.
Qosmio X505-890=i7-740QM-6GB DDR3-64 GB SSD-500 GB SATA-
BR-Rom-DVD Burner-HD 18"Display-GTS360M-1GB-GDDR5
HP 17 Envy 3wks Returned
DIY Desktop Builds

Disabling the integrated graphics card or updating any software they use that will aid the computer in switching between the two graphics chips.

So I couldn't activate Assassin's Creed 3 on bootcamp which I shuold have been able todo. I posted it on Ubistoft Support and This is what I got!
Hello ,
It looks like your DXDiag report is showing only an integrated graphics card. Being an Apple computer with an i7, it should have a dedicated video card as well. You may need to contact Apple support so they can help you either disable the integrated graphics card or update any software they use that will aid the computer in switching between the two graphics chips.
So I was wondering how I could disable the intergrated grahics card or update any software that will aid the ocmputer in switching between the two graphic chips.

The Early 2011 13-inch MacBook Pro has only got one graphic card, and this is the integrated card, Intel HD Graphics 3000.
Some games don't support this type of GPUs, and it looks like Assassin's Creed is one of them, so unfortunately, you can't run the game in this MacBook

Nokia Dictionary - switching between 2 languages

Hi,
I often use Nokia Dictionary and I think it's a nice, simple tool. But there is one, very annoying problem with it.
When I try to switch between languages (let's say I use Danish-Polish dictionary) and I want to reverse languages - Polish to Danish - each time I need to do it by choosing source and target language in menu. It tooks a lot of time and it's inconvenient.
I would like to do it faster. Is there any chance to add new position in menu or aditional button called "Reverse languages" or something similiar?
I hope you understand my suggestion. I use Nokia N8 (Symb. Anna)

mohammad233 wrote:
I can't see any option for language switching shortcut on this address.
Do you really not see the same thing I do there?

Switching between multiple input languages.

I use English, Korean and Google Japanese. I used to use Windows with the same set of languages and it was even more difficult than in OS X, because each IME may have multiple languages (for example, Korean IME has both Korean and English mode). Now in OS X it is better than Windows because each IME has only single language, but still there are some troubles.
I use long command + shift. It shows the list in the middle of the screen, but the order is change depending on the current IME. And it only has text, no flag icon, so it is difficult to get the IME I want without carefully watching the screen.
It looks like OS X does not support assinging a shortcut for each langauge. For example, if I could assign F1 for English, F2 for Korean and F3 for Japanese it would be much easier. Or if only the popup language screen had flag icons...
Is there any third-party app that helps switching between multiple IMEs?

If you stop holding down the keys so long, the list should not appear. Instead, use the flag icons at the top right of the screen to tell which keyboard is active. If you don't see those icons, go to system prefs/language & text/input sources and check the box for Show Input Menu in Menu Bar.
I don't know of any way to use keyboard shortcuts in general for this, but the app Nisus Writer has preference settings that let you set that up for that app.

Nokia E55:: Switch between the 2 writing languages

Similar Messages

Maybe you are looking for