Nokia E7 call screen question

Hi Does anybody know if is it possible to make the screen auto-lock when you are talking to the phone...???? (from the options in the mid of a conversation if found that you can manually lock it) i know that deactivates when you cover the light sensor but i believe its not enough cause all the time i find open apps on the screen because of my ear!!!! thanks :-)

Try Fast Panel, won't auto lock, but tapping the top left of screen will lock it and then you could answer call, on the other hand , it may be worth getting the phone looked at, mine doesn't launch apps when I take a call ?
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Similar Messages

Nokia 701 call screen lock feature?

Hi nokia community,
was wondering if there is call screen lock feature in nokia belle? Because i couldn't find it any where in my nokia 701, even there is no option to edit the normal lock screen or button?
Why there are bugs and such small and important features are missing in nokia's belle OS?
Please help me feel like i'm using a smartphone.
Any help would be highly appreciated.
geekObelle
Solved!
Go to Solution.

Hmm..I am not sure..call nokia care in your country.
I am not having anything to complain about regarding how my 701 behaves with incoming calls or things about "lock screen"..sorry.
PS Try out "Nokia sleeping screen" for nice "lock screen" features when phone is asleep..Nokia store..
Nokia 808 again (delight Belle), Nokia E7 and X7 ( again, all on Delight Belle...after some time on Nokia Lumia 925 (retired), 1020 (not that great)and Lumia 820 (Replaced my router at home, great for internet sharing).., N9 The best device ever (use it as much as Lumia 1020), Nokia 700 (Sport Phone/My Love :-) ) Nokia 701, Nokia E6 (Should have a follow-up from Nokia among with larger screen, NFC, Autofocus), Lumia 800 (Retired After 6 weeks), -Sports Tracker-Nokia Internet Radio-Handy Safe-Skype-Bambuser-Screenshot app pro-fMobi-ComingNext-Manual TaskSwitcher-jagiTimer-Easy StopWatch-Boldbeast-Equalizer-Financial Calculator-WiMP Music-YTasks-Davi-Thumbnail Folders-BizCalendar-Tiny7-Situations-nn reeder-Sport Timer-CameraLover-CameraPro-GrabRadio-LiveScore-Poddi-Gravity-SkyFilesPro

Nokia N8 Call Screen does not rotate landscape

After PR1.1 the dialer rotates to landscape mode on the N8, but the call screen that comes up after this, is still in portrait mode.
Yet, on the C6, the call screen also rotates to landcape mode with PR1.1
(see screenshot of C6 call screen in landscape mode)
Why does the C6 call screeen rotate landscape yet the N8 does not?
thanks
Attachments:
C6_call screen.jpg ‏47 KB

You are correct, C6 is not but I meant to say NOKIA C6-01 is running S^3, and the call creen rotates landscape, yet the N8 does not.
http://www.gsmarena.com/nokia_c6_01-3524.php
I would like Nokia to tell me why this is, and if they are going to address it.
I want a landscape call screen also for my N8!

In CL_GUI_SPLITTER_CONTAINER ALV list is not show in called screen

Hello experts,
i come across a problem while using the class:CL_GUI_SPLITTER_CONTAINER ,
my codes is as follows:
data:declarations is as follows:
             data:gr_spliter     TYPE REF TO cl_gui_splitter_container,
                     gr_container1 TYPE REF TO cl_gui_container,
                     gr_container2 TYPE REF TO cl_gui_container,
                     gr_grid1       TYPE REF TO cl_gui_alv_grid,
                     gr_grid2       TYPE REF TO cl_gui_alv_grid,
step 0 Fit table contents:gt_out1 and gt_out2
step 1:   CREATE OBJECT gr_spliter
               EXPORTING
               parent            = cl_gui_container=>screen0
               ows               = 1
               columns         = 2
step 2: CALL METHOD gr_spliter->get_container
             EXPORTING
             row       = 1
            column    = 1
            RECEIVING
            container = gr_container1.
            CALL METHOD gr_spliter->get_container
             EXPORTING
             row       = 1
            column    = 2
            RECEIVING
            container = gr_container2.
step 3 :call screen 100 to show ALV.
in the screen's PBO ,i show ALV using CL_GUI_ALV_GRID,the codes is:
   CREATE OBJECT gr_grid1
    EXPORTING
      i_parent          = gr_container1
   CREATE OBJECT gr_grid2
    EXPORTING
      i_parent          = gr_container2
CALL METHOD gr_grid1->set_table_for_first_display
    EXPORTING
      i_structure_name              = Structure of table Gt_OUT1
    CHANGING
      it_outtab                     = gt_out1
CALL METHOD gr_grid2>set_table_for_first_display
    EXPORTING
      i_structure_name              = Structure of table Gt_OUT2
    CHANGING
      it_outtab                     = gt_out2
But after activing the program ,there is no ALV show in screen 100,I debug the program and find that
all the above object have been created corredtly.
if i create a custom contol named 'CONTAINER',and at Step 1 change the parent's value to 'CONTAINER',
then i could see the ALV　whick i hope in screen 100.
If i create a custom control in screen 100, the size of the alv will be different across different computer,
is it possible to use CL_GUI_CONTAINER=>screen0 as cl_gui_splitter_container's attribute parent value???
and i find that there are 10 attributes named screen0 to screen9 in class CL_GUI_CONTAINER,will you tell me the usage of
these attributes?
now i only konw that ,you could set a containers parent value to be CL_GUI_CONTAINER=>screen0,which you do't have to create
a custom control in your screen ,and the alv will be shown in full screen.and what the other attributes use (screen1,screen2,screen3,screen4 and so on)
now i am confused with the problem,i am sure any words from you will give me help to this question!
Hope to receive your advice!
Best regards!
yours Carl
Edited by: lakeandmoon on Aug 27, 2010 11:24 AM

Dear Carl,
I mean go to screen painter and place there CUSTOM_AREA (the icon with C letter). In program's PBO create CUSTOM_CONTAINER
module pbo output.
if custom_container is initial.
CREATE OBJECT custom_container
   EXPORTING container_name = 'CUSTOM_AREA'.\
endif.
endmodule.
Then you work only with CUSTOM_CONTAINER (i.e. as parent to SPLITTER_CONTAINER). Using subscreens here doens't really add the value, so you don't need any.
But how could i stretch the screen and this area to full screen?is it just gragging the screen to full screen and drag the subscreen or the custom control to full screen in screen painter?
Yes, this is what I mean
Regards
Marcin

My NOKIA LUMIA 720 -Screen freeze & Automatic fast...

My NOKIA LUMIA 720 -Screen freeze..Automatic fast screen touch working without my input
Since yesterday, i am facing this issue. Its 1 month old mobile.
Today i scared alot with my phone working, because my lumia 720 home screen is automatically working with out any of my input. i had seen 3 to 4 times, it struck off all once and it stands on Calculator screen or messge inbox scrren.
Some times, it automatically asking for deletion of contacts & it is asking for link of contacts to one another & it is automatically going for a new message and asking for some file attachment addition.then i feared alot and i switch off the phone immidiately.
What if, any of my images or personnel files went to a wrong person.
Please suggest any of you, what to do now.

M too having this problem.. tried soft/hard reset but no use.. updated every system and app still no use.. I dont even droped my phone that could be the cause of this f*****g problem. Now the down touch not working. but after 5 to 6 hrs of rest it started to work insanely like you said. I cant even use my phone and sometimes the call been ended coz of this stupid problem -_-"

Nokia 6288 says nokia then white screen then black...

nokia 6288 says nokia then white screen then black at least 4 times then switches off its happened twice ive replaced the first one its a day old then the next one did the same thing now im awaiting for a call from the phone company i bought it from
NOKIA N73 MUSIC EDITION

i am having the same trouble i have just brought this phone on the 26 of october and i have had it back at the nakia care centre three times to be looked at and they fix it and within that day i get it back it happens again ....... the care centre upgraded software (dead flash). zone tested ok that all they did and now i have to send it back again i was wondering is there anyway i am able to reboot the phone myself???

WD navigation - Exiting application back to calling screen.

Hi Gurus,
Simple WD question. I'm developing an "exit" button that would enable the program to navigate back to the calling screen which is either an Iview or a UWL message.
I tried finding snippet, tuts and reference codes but couldn't any.
Is there any API or methods that enable me to retrieve the calling URL of the application? Or do I need a few more steps to generate/retrieve those URLs?
Any gurus kind enough to help? Thanks alot!
Regards,
Jansen

Janson,
Try using Exit plugs to accompolish your requirement.
1. In the Web Dynpro explorer expand the node <WD project> Web Dynpro Components <YourComponent> Component Interface Interface Views <YourComponent>InterfaceView and then double-click on it.
2. Select the tab "Plugs".
3. Add a new outbound plug of type "Exit plug" (Mark checkbox "Exit Plug" in the window that pops up for the New Outbound Plug) and name it as "AppExit" and choose Next.
4. By clicking "New", add a new parameter with name Url (Use exactly the same name Url) of type
String and choose Finish.
Now add the interface view controller usage to the required view from which you have to exit and go back to a URL.
1. Select the Web Dynpro Components <YourComponent> Views <YourView>.
2. Select the Properties tab.
3. Add the required usage of the controller <YourComponent>InterfaceView.
Then, create a button in your view (say "Back") and associate it to the event / action handler.(say, onActionExit).
In the event handler write the code like this:
public void onActionExit(com.sap.tc.webdynpro.progmodel.api.IWDCustomEvent wdEvent)
// controller
wdThis.wdGet<YourComponent>InterfaceViewController()
.wdFirePlugAppExit(<TargerURL>);
Please note that upon exiting, all the involved components will be destroyed automatically by the WD runtime.
All the aforementioned points are available in the standard tutorial
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/inter-application-navigation%20in%20web%20dynpro.pdf">Inter-Application-Navigation</a>
You may refer the same for any further assistance.
Bala

,Emergency call screen can call any number?

Is the Emergency call screen in your Iphone supposed to be only to call 911??? because on my phone, when I use the emergency call screen, it can call any number I want.
Does it happen to you too???
Message was edited by: PATRICIO_NY

from there my question was, is it supposed to be only to call 911,
I know exactly what you meant and what your question is, and the answer is no.
You can call any number from the emergency call selection.
And as I already provided, I want it this way. If I was in dire straights and I was able to place a call and I can only dial 911 and there is no answer at that particular time or lines are busy (which can occur), I want the ability to dial any number, not just 911, and the same for anyone that is with me if I'm unable to place a call and my iPhone is the only cell phone available.
If my iPhone was lost or stolen, I would call AT&T first to have my iPhone's SIM card disabled. Someone that finds or steals my iPhone makes a few calls in the interim before my iPhone's SIM card is disabled by AT&T, so what? I have a calling plan and a rollover minutes credit.

POPUP_TO_CONFIRM & CALL SCREEN in TRIP t-code of ECC 6.0 and ESS Portal

Hi All,
We are moving from 4.6c to ECC 6.0. In 4.6c, we use POPUP_TO_CONFIRM FM and CALL SCREEN command in a custom FM to raise a confirmation screen in the standard T&E Trip Transaction ( T-code TRIP) from Portal.
From Portal, in ESS screen, when a button is pressed we call this custom FM. This custom FM uses POPUP_TO_CONFIRM and CALL SCREEN. This works fine in 4.6c
Whereas, in ECC 6.0 it gives dump when these statements are encountered.
Question:
Does anyone know what is the solution or any alternative to these commands in ECC 6.0?
FYI - This question was earlier posted in ABAP Dynpro but no response.
Thanks,
SKJ

What is the error message you are getting?
The TRIP code may have been re-written to make more use of ABAP Objects which may place some constraints on what you can do, or it may be a unicode related issue.
Post more details of the user exit you are using to call your FM and the resulting error to see if more assistance is possible.
Andrew

N95 DEAD NOKIA LOGO ON SCREEN ALL THE TIME

TRIED TO up date MY N95 FROM V12 TO LATEST. hard PHONE IN GENERAL PROFILE.. PHONE WENT OFF ON IT OWN @10%.. JUST LEFT WITH NOKIA LOGO ON SCREEN ALL THE TIME I WHEN PUT IT BACK ON?

Phones switch on and off during the update, this is normal.
Depending how far it got before stopping, you might be able to recover it: switch off, hold the green call key, asterisk key and 3 key down with the fingers of one hand, and use the other hand to switch the phone on - keep the three keys pressed untul the Nokia handshake is finished.
If you are lucky, this will reformat the phone and restart it. Otherwise, you have to got to Nokia service point - if you still have warranty, problems caused by NSU can be fixed free.

What is the diffrence of 'call screen 100' and 'leave to screen 100'

Thank u

hi,
You can insert a screen sequence. This adds another layer to a stack.
You insert a screen sequence using the CALL SCREEN <nnnn> statement.
Note: Layers created in this way must be removed afterwards. You can do this by setting the next screen
statically or dynamically to the initial value (0) an the end of the inserted screen sequence.
To interrupt processing of the current screen and branch to a new screen (or sequence of screens), use
the CALL SCREEN <nnnn> statement. The screen <nnnn> must belong to the same program.
In the program, the system constructs a stack. The stack has to be destroyed before the end of the
program.
To return to the statement following the CALL SCREEN statement, you can use either SET SCREEN 0.
LEAVE SCREEN. or LEAVE TO SCREEN 0. The screen that called the other screen is then processed
further.
If you use the above statements outside a call chain, the program terminates, and control returns to the
point from which it was called. You can also terminate a program using the ABAP statement LEAVE
PROGRAM.
To interrupt processing of the current screen and branch to a new screen (or sequence of screens), use
the CALL SCREEN <nnnn> statement. The screen <nnnn> must belong to the same program.
In the program, the system constructs a stack. The stack has to be destroyed before the end of the program.
To return to the statement following the CALL SCREEN statement, you can use either SET SCREEN 0.
LEAVE SCREEN. or LEAVE TO SCREEN 0. The screen that called the other screen is then processed
further.
To specify the next screen and leave the current screen in a single step, use the LEAVE TO SCREEN <nnnn> statement.
Hope this helps, DO reward.
Edited by: Runal Singh on Apr 3, 2008 3:11 PM

ALV not getting refreshed when call screen is executed second time

I have 2 screens 9001 and 9002. In 9001 , I am displaying the fields of a database table in a Table Control. The user has to select some of those fields and click on a button 'Generate ALV'. After clicking , the control navigates to 9002 where I am displaying ALV with data in the selected fields(the other fields remain empty). (using custom container)
Now there is BACK button in 9002 where i have written LEAVE TO SCREEN 9001. After this if the user again make changes in column selection and click on 'Generate ALV' , then still the old alv data is displayed. (Mind you the structure of alv is same , only the selected fields should show data).
I am using REFRESH_ALV_DISPLAY also and when i tested this function independently , its working fine (although for interactive alv in the same screen).
I am making use of <fs> for dynamic internal table and i checked it using breakpoints , during the 2nd time , it contains the correctly updated data so i think the problem lies with alv
Kindly check this code
MODULE STATUS_9002 OUTPUT.
SET PF-STATUS 'ZALV'.
* SET TITLEBAR 'xxx'.
CREATE OBJECT C_CONT
 EXPORTING
 CONTAINER_NAME = 'CUST_CONT'
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF OBJ_ALV IS INITIAL.
CREATE OBJECT OBJ_ALV
 EXPORTING
 I_PARENT = C_CONT
CALL METHOD OBJ_ALV->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 I_STRUCTURE_NAME = INP_TABLE
 CHANGING
 IT_OUTTAB = <itab>
ELSE.
 CALL METHOD OBJ_ALV->REFRESH_TABLE_DISPLAY
ENDIF.
ENDMODULE. " STATUS_9002 OUTPUT
Edited by: amber22 on Sep 16, 2011 6:45 PM

Amber,
Something like:
*& Module STATUS_9001 OUTPUT
MODULE status_9001 OUTPUT.
SET PF-STATUS 'ST9001'.
ENDMODULE. " STATUS_9001 OUTPUT
*& Module USER_COMMAND_9001 INPUT
MODULE user_command_9001 INPUT.
CASE sy-ucomm.
 WHEN 'GEN'.
 SELECT * FROM spfli INTO TABLE gt_outtab.
 CALL SCREEN 9002.
 WHEN 'BACK'.
 LEAVE.
ENDCASE.
ENDMODULE. " USER_COMMAND_9001 INPUT
*& Module STATUS_9002 OUTPUT
MODULE status_9002 OUTPUT.
SET PF-STATUS 'ST9002'.
IF obj_alv IS INITIAL.
 CREATE OBJECT c_cont
 EXPORTING
 container_name = 'CUST_CONT'.
 CREATE OBJECT obj_alv
 EXPORTING
 i_parent = c_cont.
 CALL METHOD obj_alv->set_table_for_first_display
 EXPORTING
 i_structure_name = 'SPFLI'
 CHANGING
 it_outtab = gt_outtab.
ELSE.
 CALL METHOD obj_alv->refresh_table_display.
ENDIF.
ENDMODULE. " STATUS_9002 OUTPUT
*& Module USER_COMMAND_9002 INPUT
MODULE user_command_9002 INPUT.
CASE sy-ucomm.
 WHEN 'BACK'.
 CALL METHOD: obj_alv->free, c_cont->free.
 CLEAR: obj_alv, c_cont.
 CALL METHOD cl_gui_cfw=>flush.
 LEAVE TO SCREEN 9001.
ENDCASE.
ENDMODULE. " USER_COMMAND_9002 INPUT
Altough it's not a really nice solution... Why using 2 screens for example? you could use two containers instead...
Also I would recommand playing with the new salv class for your grids.
Anyway don't hesitate to give feed-back.
Kr,
m.

Statement "CALL SCREEN" is not allowed in this form.

Hi,
Could anyone identify the short dump.
Statement "CALL SCREEN" is not allowed in this form.
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
- SUBMIT
Error in
"POSTING_ILLEGAL_STATEMENT" " "
"SAPLKKBL" or "LKKBLU01"
"K_KKB_LIST_DISPLAY"
Regards
Manohar S

Short text
Statement "CALL SCREEN" is not allowed in this form.
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLKKBL" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
There is probably an error in the program
"SAPLKKBL".
This program is triggered in the update task. There, the
following ABAP/4 statements are not allowed:
- CALL SCREEN
- CALL DIALOG
- CALL TRANSACTION
| - SUBMIT
Information on where terminated
Termination occurred in the ABAP program "SAPLKKBL" - in "K_KKB_LIST_DISPLAY".
The main program was "RSM13000 ".
In the source code you have the termination point in line 441
of the (Include) program "LKKBLU01".
| The program "SAPLKKBL" was started in the update system.
This is the dump

Problem with Call Screen and Leave Screen !

Hi,
I am calling Modal screen (Dialog Pop up screen) from my first screen by 'Leave to Screen 'nbr' ' then once user enter the value in the pop up screen then I haveto display value with TABLE in Final screen as 'Normal screen' here I am using LEAVE to SCREEN, but after this call - my new final screen is not displaying as noraml screen it also displaying like 'Modal Screen' Like big pop scrren.!!
When I tried final CALL by using CALL SCREEN instead of LEAVE screen the final screen with table is dispalying fine as Normal screen but its returning control to pop-up screen which I dont want.
I like Screen flow as 1>2>3--->1
Help me to solve this Problem.
Regards
James

Hi,
Check the below thread,
Unable to close Modal dialog box
1) 1st screen--> 2nd screen --> Use CALL SCREEN.(This is Modal Screen)
2) 2nd Screen-->(ModalScreen so you need come back) use the above thread
3) Still on 1st screen--> Use CALL SCREEN --> To 3rd Screen
4) 3rd Screen back to First Screen -> use LEAVE TO SCREEN First_Screen_NO.
Cheerz
Ram

Problem with call screen

Hi everybody, I did work a program with Tx SE38, in the program I call a screen.
START-OF-SELECTION.
PERFORM completa_lista.
CALL SCREEN 0100.
END-OF-SELECTION.
The program run very well, but. When the program is in screen 0100 and push the button BACK or button EXIT. Don't return to program that called to screen 0100, always return to the program SAPMSSY0 and then push again the button BACK or EXIT to return the program that called to screen 0100.
This is my code in the PAI:
MODULE user_command_0100 INPUT.
CASE sy-ucomm.
WHEN 'EXIT' OR 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE.
I try with SET SCREEN 0. or LEAVE TO SCREEN 0. But always return to the program SAPMSSY0
Is there a way to skip the program SAPMSSY0?

Hi ,
LEAVE TO SCREEN 0 will work in your case.
it comes back to the point from where it triggered screen 0100.
If you want to leave the program and come back to the easy access screen then you have to use LEAVE PROGRAM.
hope this helps!!
Regards,
Soumya Ranjan
Edited by: Soumya Ranjan on Dec 15, 2010 5:59 AM

Nokia E7 call screen question

Similar Messages

Maybe you are looking for