Nokia N86 ocsasional system error and getting wors...

Hi
My N86 displays a "system error" message on the screen when I turn it on. It doesn't happen always, more like once a week, normally when I turn it on in the morning. It has the latest software (installed twice), did a hard reset and formatted the 8gb internal memory and memory card but it still happens. I don't see the problem affecting any functions directly but the phone does behave weirdly sometimes e.g. opening the camera does nothing, unplug the charger and it still shows as charging, button lights don't turn off, occasional freezes, etc...
As anyone experienced this "system error" on a N86 when turning it on?
Thanks and Happy New Year
David

How old is your battery? I don't recognize your particular issue, but my N86 behaved strangely as the battery got old: /t5/Nseries-and-Symbian-Smartphones/Old-battery-symptoms-with-Nokia-phones-E51-N86/m-p/1209787#M2798...

Similar Messages

Nokia N63 General: System Error

I have been using my Nokia N63 since November without any problems and now for the past month whenever I update my Memory Card it tells me I have a general: system error and I cant read anything on the card. Before I had a 512 and now I have a 1Gig. The only thing I have on there is music. Anyone Else getting this problem or know how to fix it without wiping the phone?

You have to hard format your mobile. For that, backup your mobile's contacts, messages, notes, calender and bookmarks via Nokia PC Suite backup utility. Don't backup anything else like settings or user files etc. Now backup your images, videos and music files using Windows Explorer. Now format your memory card and switch off your mobile. Now press and hold this 3 key "green call key, * and 3" together and switch on your mobile. Press and hold down that 3 button till country insertion dialogue appear. Now restore all your backup using PC Suite and explorer. This will solve your problem. Now install applications you like. Good luck...
If you like my post then give me "Kudos" star...

At startup-system error and divide by zero

I've been having a lot of problems starting up my beige G3 mini tower, it has 233mhz, 384ram, mac os9.1. I've zapped the pram and held the shift key down to boot with extensions off, didnt work. I've changed the battery twice in case the first replacement was bad, it started up and ran long enough for me to trash all the preferences, I tried to change the extensions, but when restarting it was back to not completely starting up. I've tried pressing the button near the pci slots with the battery out, 30 seconds, waited 30 minutes and held down the button for another 30 seconds, replaced the battery, checked the sound card for looseness then at startup it worked till I changed the time and date. I tried the battery and button again this time waiting over night between pressing the button for 30 seconds, after startup I was able to run disc first aid and it said everything was ok, then crashed again when I tried to change the date and time. I've even tried booting up from command/option/o/f, I'm not sure what firmware is but it would try to start up that way,but was very slow with a os cd in the cd drive. I tried to erase the hard drive but I couldnt get it to start up from a cd, iv'e tried os9, the original cd that came with the computer and a system recovery cd.
Most times when trying to start it up it chimes, then the happy mac with a grey screen, then the mac os screen, then the bomb with "system error" and under that "bus error" under that it says to restart with extensions off. sometimes the button for restart will even work with the cursor. Once, after trying to start up after all the battery removal, pressing button near pci slots , pressing com/opt/o/f, extensions off, the screen getting to the mac os then the bomb dialogue, it said system error and instead of saying "bus error" it said "divide by zero". Thats the first and only time I've seen that one. Also, the grey screen (with the happy mac disc icon) now has horizontal lines with texture? that I havent noticed before.
got any ideas what I should do next? I probably wouldnt bother with my G3 anymore because I just bought a new Imac, but I have a vinyl cutter hooked to it, it has the old round serial port cables and I would have to buy new software, cables and dongle to use it with my new Imac, I also have illustrator, photoshop, scanner, and drawing tablet on my G3 that I cant use on my new Imac (intel) leopard.
Is my hard drive or motherboard dying? is there a way to find out if and what hardware is messed up? and if so, is there still still parts out there for this G3?

Hi, R1camper -
I ran disc first aid from the cd and and it said it couldnt fix-overlapped extent allocation,4,479.
That is a type of disk directory damage, one which Disk First Aid can not repair.
Alsoft's DiskWarrior can usually repair that kind of damage, with no loss of files. If you choose to go this route, suggest you call (or email) Alsoft's sales department, and request an older version of DiskWarrior - the current versions won't run on your Beige G3/MT.
However, if you can manage to live with the loss of files, you can probably replace the hard drive for less cost.
Your Beige G3/MT came with either an ATA (now often referred to as PATA and/or IDE) drive or a SCSI drive - it could have been ordered with either when the machine was new.
With luck it will be an ATA drive, since those are the least expensive and the easiest to install. Such drives are not Mac-specific - any ATA drive designed for internal use and of appropriate size will work. The only item of concern is to set the drive's jumpers properly. The drive should be jumpered as Master (it may come preset as Master or as Cable Select - Cable Select will not work on your model), unless it is a Western Digital in which case it should be set to Single if that is an available choice.
There is probably little to gain by getting a 7200RPM drive, especially if there is extra cost for one vs. a 5400RPM drive - the relatively slow internal bus speed on your machine will not be able to take significant advantage of a faster drive.
Re the RAM, if you have the time you might try replacing any you took out. Over time the contact the module makes in its slot can get iffy - removing and replacing the module usually fixes that problem, by wiping the contacts clean.

System error and restart not possible

Hi
I have developed the Proxy to SOAP scenario and it used to work normally as designed, But suddenly it started giving the System error and restart not possible,
I see the following error in the Runtime work bench on the Receiver CC
SOAP: response message contains an error XIAdapter/HTTP/ADAPTER.HTTP_EXCEPTION - HTTP 500 Internal Server Error
Can anyone let me know what the error is
Thanks
PR

Hii
If this channel was in working state earlier, then this error would mean that the receiver webserver hosting the webservice has some problem. You may contact the receiver system for checking out if they have problem at their end and if they agree resend the messages and it should pass through.
It may be problem with certificates even.
Best Regards

Application Error, System Error and Error in SXMB_Moni

Dear PI Gurus,
I am kinda new to PI(XI) environment, and my self confused when I try to search failed messages in XI. I saw in Status group, there is Application Error, system Error and Error under SXMB_MONI. And I am wondering what is the different between these errors. Worst to come it all errors, Why we do have this separated errors? Can anyone tell me, what is the difference between this errors?
Thank You
Regards
Ramesh

Hi
- Application Error related to SOAP
just look at tgis Blog
/people/jin.shin/blog/2007/05/21/handling-web-service-soap-fault-responses-in-sap-netweaver-xi
also look at this Thread for SXMB_MONI-system error occured
SXMB_MONI-system error occured during persist
Regards
Abhishek
Edited by: Abhishek Agrahari on Jan 21, 2009 7:48 AM

OIM after BP12 patch system error and logging not working

Hi,
I am using Weblogic 10.3.2 and need to install OIM. I have installed the 9.1.0.1 and then the patchset to 9.1.0.2. Then I have installed the bundle patch BP07 and everything was ok.
Finally I have installed the BP12: now i am unable to log in the OIM admin panel ( system error ) and i cannot connect with the design console (NullPointerException). The worst part is that OIM does not write a log file anymore, so i can't determine what's wrong. What should i do?
thx in advance

no errors, everything fine. The webapps (xellerate and nexaweb) are started normally.
As an additional information, i just tried to revert to BP07, it still doesn't work.

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

Running Premiere PrO cs6. After upgrading to Yosemite 10.10.2 Adobe Premiere wont run, come up with system error and shuts down. Any one else had this issue?

can try this Premiere Pro CC, CC 2014, or 2014.1 freezing on startup or crashing while working (Mac OS X 10.9, and later)

NOKIA N97 SYSTEM ERROR AND MENU NOT OPENING

I have a N97 which is a far cry from the N900. Anyhow, of recent when I try to access the menu a message pops up saying "System error" - so, I cannot access any of the other functions through Menu and, quite honestly, I don't know how else to access the menu. Any ideas or suggestions to resolve this would be appreciated!

Apart from loss of data I would probably suggest carrying out a "hard reset" upon this device, which is chronically short of phone memory:http://mynokiablog.com/2009/07/18/how-to-hard-reset-your-nokia-n97/
Happy to have helped forum in a small way with a Support Ratio = 37.0

Nokia E61i - Mail4Exchange: "System error.Try agai...

Hi,
I got myself a Nokia E61i recently. I have installed the Mail4Exchange software and I introduced the right settings and email configurations, which I got from the company IT service.
The phone connects to the exchange server, followed by a pop-up message saying "System error. Try again later." When I change the connection from 'unsecure' to 'secure', the message becomes "Error in exchange server. Try again later."
I do not manage to access any emails. I have discussed the issue with my IT service but they are not sure either.
Is anyone familiar with this problem, and do you know what do to about it? Many thanks in advance.

Dear Ryfusz, I would like to know whether you found a solution, or heard from anyone who had?
I would also like to hear from someone from Nokia on this - here we all are on a website called "Nokia connecting people", which is all very well, but many people seem to be affected by this problem of not being able to connect their E61i and other phones to use M4E without getting the message "System Error. Try again later."
So far I can see from the web that people have tried or proposed the following solutions:
1. Change access point
2. Remove proxy connection
3. Check incompatibility with Gmail
4. Turn off secure connection
5. Check with organisation IT department
6. Check Microsoft site http://support.microsoft.com/?ID=817379
7. Do a hard reset (ie format the internal memory and erase everything)
8. Get rid of Nokia phone and buy something else.
I so far have tried 1-6 (though 6 was unintelligible to me). What does NOKIA suggest??
Frustrated, Beijing.

Nokia E7-00 system error after hard reset

Hi Guys I did a hard reset on my phone today as my phone would freeze at times but it seems that it has given me new problems
Firstly, Everytime I restart the phone, the system error message comes up on the homescreen, I would click ok but it comes up 3 or 4 more times
Secondly, I cannot access my contacts at all, whether I try accessing it from the menu or from a shortcut I have on the homescreen.
I have tried to solve this myself...
I have re-installed the phone software after doing the hard reset,
I have restored my phone from the backup I did,
and I have rebooted the phone a few times but I still get the same thing
The software is Symbian Anna, I understand that there is a Belle update but it is not yet available for the phone that is on the network that I am on (which is network Three)
I have had this phone since september 2011 and it is under warranty. This is the first time I have encountered a problem.
Other than that, everything else works fine; I can install apps and make calls and use the internet etc. I just want to get rid of the system error message, and have access to contacts without having to send the phone off for repair!

The issue could also be caused by the restore ? I never do a full backup and restore when doing a reset as the restore may apply settings/data that caused an issue. My advice would be to backup Calendar, Contacts and Notes ONLY. Dial*#7370# followed by 12345, if required, then re-install the latest firmware using Nokia Suite. After this restore your contacts etc, then set up the phone manually, hopefully this would resove any issues, bit of a pain, but should work !!
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Nokia E5 videos - system error

hey i need help.. i had some videos in my phone memory which i deleted in my nokia e5.. but when i checked my gallery its still there and when i tried to open, it says system error... wat do i do?? please help me
Moderator's note: We have changed the title of the post to facilitate discussion specifically for this topic.

I believe I found a solution! I'm surprised no one else has found this... maybe it's just my phone. Here we go:
1. Back up any important data... I'm not sure what the files we're about to delete are, but I found no negative impact since deleting them, but be safe. Always.
2. Through the main menu, go to: Office>File Mgr.>Phone Memory>logs>Eng>0ds
3. There are a butt-load of .xml files. Mark All.
4. This may take a few minutes to select all (since there are a lot... the first time I selected all it took about 7 mintues, since there were about 18000 files)
5. Once all are selected (you'll know because fo the check marks), select DELETE.
6. It will ask you if you really want to delete those 18000+ files, confirm it.
7. This step took me about 3 hours... but once they were all deleted, I had about 150MB free space!
8. Good luck, be patient, make sure your phone is plugged in, maybe do it overnight.
Skujins

What is causing this system error and how do I fix it?

The following system error appears every few seconds in the system log of my wife's computer:
Aug 27 14:19:57 Dee-Coopers-iMac mds[35]: (Error) Import: importer:0x884600 Importer start failed for 501 (kr:268435459 (ipc/send) invalid destination port)
Aug 27 14:20:27: --- last message repeated 7 times ---
Aug 27 14:20:29 Dee-Coopers-iMac mds[35]: (Error) Import: importer:0x884600 Importer start failed for 501 (kr:268435459 (ipc/send) invalid destination port)
Aug 27 14:20:59: --- last message repeated 7 times ---
I have run Tech Tool Pro Advanced Tests, repaired the permissions, and restarted the computer multiple times but noting has fix the error. What is causing the error and how do I fix it?

Last night I revisited the problem and discovered that I had not emptied the Print Shop Importer from the trash. I emptied the trash, restarted the computer, and the error messages stopped. Also before I restarted the computer I noted that Time Machine had stopped backing up and that Spotlight was indexing the hard drive. I blocked the indexing before I restarted the computer. In any event the original problem seems to be fixed.

Trying to setup new iCloud in system preferences and get error message: "iCloud encountered an error while trying to connect to the server."

Here's the sequence of events:
Setting up a new iMac.
Migration Assistant was aborted during setup and a normal setup was completed.
Then ran Migration Assistant from the newly setup account.
It ran fine, but put all the data in a new account called "user".
Renamed "user" to a new name, renamed the home folder to a new name following these instructions: OS X: How to change your account name or home directory name
Delete the account we originally created, so just have one account with the name we want and all the data, email. Works fine.
Sign into the App Store with the account we share for purchases.
Now, the problem:
Go to System Preferences to setup iCloud with a new Apple ID
Get this error: "iCloud encountered an error while trying to connect to the server."
So I'm unable to setup iCloud for photo stream, FaceTime, etc.
Internet works fine, we can get mail, etc.
Rebooting doesn't help
Ideas?

never mind the problem is gone this morning.

Installing system updates and getting error saying photoshop is unavailable try again later. Can't upload raw NEF images until I install this update. Help!

I am using photoshop elements 9 and need to upload a session of photos I just took in NEF raw, but it gives me an error saying it cannot open the photos. I read in another forum that this probably means I don't have the latest update installed. I try to get the update and it gives me an error saying that photoshop is unavailable and to try again later. I am on a time crunch and need to figure this out asap if possible! Any help is greatly appreciated!

update manually,: http://www.adobe.com/downloads/updates/

Mail Delivery System Errors and Securing/Protecting agains spam

Good morning all.
This morning I started recieving these:
          From: Mail Delivery System <[email protected]>
          Subject: [It] Postfix SMTP server: errors from imr-mb02.mx.aol.com[64.12.207.163]
          Date: November 18, 2011 8:51:23 AM EST
          To: Postmaster <[email protected]>
Transcript of session follows.
Out: 220 mail.cotaoil.com ESMTP Postfix
In: EHLO imr-mb02.mx.aol.com
Out: 250-mail.cotaoil.com
Out: 250-PIPELINING
Out: 250-SIZE
Out: 250-VRFY
Out: 250-ETRN
Out: 250-AUTH LOGIN PLAIN CRAM-MD5 GSSAPI
Out: 250-AUTH=LOGIN PLAIN CRAM-MD5 GSSAPI
Out: 250-STARTTLS
Out: 250-ENHANCEDSTATUSCODES
Out: 250-8BITMIME
Out: 250 DSN
In: MAIL From:<[email protected]> SIZE=3485
Out: 250 2.1.0 Ok
In: RCPT To:<[email protected]> ORCPT=rfc822;[email protected]
Out: 451 4.3.5 Server configuration error
In: DATA
Out: 554 5.5.1 Error: no valid recipients
In: RSET
Out: 250 2.0.0 Ok
In: QUIT
Out: 221 2.0.0 Bye
How this started:
Over the past couple of days to approx a week, I have seen a massive influx of Spam on our server. Spam coming in on random ex employee names that no longer work for the company.
Previous to the spam, I turned on "forward un-deliverable mail to" and set to me. The CEO was missing emails because people were not spelling his name correctly. I have actually been able tyo catch a lot of employee emails some important, others not.
In trying to make the mail server more secure, one of the features I tried to turn on was SMTP Client Restrictions, Which broke SMTP for my users. Obviously the error is mine and I need to do more research, but love some feedback on what needs to be set on the server and clients for SMTP client restrictions to work.
I know THE HOFF (mr hoffman) had information at some point to help users secure postfix, can anyone point me in the right direction, as well as any tips here on how to stop the influx of spam?
pstconf -n is here:
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
biff = no
body_checks = regexp:/etc/postfix/body_checks
broken_sasl_auth_clients = yes
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
header_checks = pcre:/etc/postfix/custom_header_checks
html_directory = /usr/share/doc/postfix/html
inet_interfaces = all
local_recipient_maps =
mail_owner = _postfix
mailbox_size_limit = 0
mailbox_transport = dovecot
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
maximal_queue_lifetime = 2d
message_size_limit = 0
mydestination = $myhostname, localhost.$mydomain, localhost, mail.cotaoil.com, cotaoil.com, $mydomain
mydomain = mail.cotaoil.com
mydomain_fallback = localhost
myhostname = mail.cotaoil.com
mynetworks = 127.0.0.0/8,192.1.1.10,192.1.1.11
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/imap/dovecot/mail
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = _postdrop
smtp_sasl_password_maps =
smtpd_client_restrictions = permit_mynetworks permit_sasl_authenticated hash:/etc/postfix/smtpdreject cidr:/etc/postfix/smtpdreject.cidr reject_rbl_client zen.spamhaus.org permit
smtpd_enforce_tls = no
smtpd_helo_required = yes
smtpd_helo_restrictions = reject_invalid_helo_hostname reject_non_fqdn_helo_hostname
smtpd_pw_server_security_options = cram-md5,gssapi,login,plain
smtpd_recipient_restrictions = permit_sasl_authenticated permit_mynetworks   reject_unknown_recipient_domain reject_unknown_sender_domain reject_invalid_hostname reject_unauth_destination check_policy_service unix:private/policy permit
smtpd_sasl_auth_enable = yes
smtpd_tls_CAfile = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.cha in.pem
smtpd_tls_cert_file = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.cer t.pem
smtpd_tls_exclude_ciphers = SSLv2, aNULL, ADH, eNULL
smtpd_tls_key_file = /etc/certificates/mail.cotaoil.com.8F44026B8E7E908CEDAAD718F486D91C8FCD693E.key .pem
smtpd_tls_loglevel = 0
smtpd_use_pw_server = yes
smtpd_use_tls = yes
tls_random_source = dev:/dev/urandom
unknown_local_recipient_reject_code = 550
virtual_alias_maps =
mail:~ administrator$

I am not certain what you mean by immediately removing the 192.1.1.10 and 192.1.1.11, AIX servers that I use to relay admin emails to an IT address here. Some sort of a gateway implemented on a pair of IBM boxes, I might presume.
192.1.1.0/24 is in a public address space that you don't have assigned (unless you're BBN). If that IP routing leaks out, then some folks can get cranky. Or should you eventially need to contact hosts within the address space of the "real" occupants of 192.1.1.0/24, routing won't necessarilt play nice. There may well be a static IP route here, depending on the details of the router configuration, as otherwise that IP traffic would be going to BBN and not to those servers. The Internet works because folks play by the rules, when working with IP routing and DNS services. And if your predecessor used this address space (and not the likely 192.168.0.0/16 block), I'd look around to see if there were other unusual network configuration choices.
TCP port 25 is the server-to-server mail port. That's the main connection used among mail servers. Blocking that has the effect that you've discovered.
It's the clients that can also use that port that need to be relocated off the port, as the clients don't have the reverse DNS and related tests that would allow them access to that port, with various common server security configurations.
Open TCP 587 at the firewall and ensure that this port is active at the mail server host, as a starting point. You can test that with (among other tools) with a remote "telnet your.mail.server.host.name 587" command or similar; that's a primitive (but effective) (common) port test.
With the Apple Mail client, make sure the SMTP server is configured to use the default SMTP ports. Mail > Preferences > Account > Account Information > Edit SMTP Server > select the target SMTP server > Advanced > select "use the default ports (25, 465, 587)" and consider using SSL and authentication. (Apple Mail tries a few ports automatically, so the set-up can be different than other clients.)
I don't have enough space here for a full write-up on how mail or IP works, and setting up an arbitrary mail client or an IP network can be an adventure; I assumed the Apple mail client in the above. See the user collaboration services disscussion of mail services in the Mac OS X Server Advanced Administration manual as some background. (And if this stuff all looks a little cryptic, that's understandable, and you might want to consider getting some set-up help or consider moving to hosted mail services and making this stuff somebody else's problem.)

Nokia N86 ocsasional system error and getting wors...

Similar Messages

Maybe you are looking for