Non-delivery issue
My mail server doesn't seem to send a user a non-delivery report if the user mis-addresses the email (such as mispelling or leaving off ".com" or some such.) Isn't the system supposed to tell you it can't deliver the mail? How can I repair this? I don't see a toggle in SA, and I'm not exacly sure of what to tag in main.cf. Any suggestions? Thanks....
In my case, they must not be set. I searched through main.cf and could not find a line that read "delaywarningtime ="
I thought it would have been a default value.
Should I add those two lines with values to main.cf? Or do they go in master.cf? Do you need to see the output of postconf -n?
To be clear, what I need is that if I send an email that is misaddessed, and doesn't go out, (or doesn't go out for any other reason) - then I get a message back from the mail server telling me that my message didn't go for whatever reason - that way I know I did it wrong or that it didn't make it.
This happened to the boss two days ago, and he didn't understand why the guy had not replied. I found the message stuck (mailq) because it was misaddressed, and he was not happy he didn't get a warning.
Thanks....
Similar Messages
-
I am very annoyed at the Creative Cloud set up and the non-stop issues and problems
I am very annoyed at the Creative Cloud set up and the non-stop issues and problems! I am paying monthly for this service and it is constantly failing in some way! So far in three months I have had to uninstall and re-install Photoshop THREE times because it stopped working properly and Illustrator I have had to do that same to TWICE! That isn't including the other apps that have had issues! I don't have the time to constantly be un-installing and re-installing all or some of the Creative Cloud because your developers are not making a product that works consistently for the money you are charging! It is costing me more than just this monthly fee! And I am even less impressed with the fact that I cannot email someone for assistance in resolving these issues. Really Adobe?
Adobe contact information - http://helpx.adobe.com/contact.html may help
-
Change the SMTP 550 non delivery message
Hi,
I want to change the texte of the non delivery report (SMTP code 550) send by the email appliance.
What is the simple way to do that ?
Moreover, i would like to know how long the applicance will keep the message in queue in case of my internal email server will be out of order ?
Where can i see/change this setting ?
Thanks.You can set the 550 from the appliance, Mail Policies > Mail Flow Policies > Choose Policy Name. From there, see the DHAP section:
To answer the second part of your question...
By default, mail is queued for 72 hours (259200 seconds) OR 100 retry attempts before it bounces to the original sender.
This setting is configurable from the command line (CLI): type bounceconfig and edit the default settings. Also, you can modify this from the GUI interface by going to "Network > Bounce Profiles" and click on the Default profile.
Also, the queue could fill up if there is too much mail. However, if the system reaches its storage limit, it will soft bounce further attempts by other mail servers to deliver more messages. This ensures that no messages will get lost, as these mail servers will reattempt message delivery as well until the ESA accepts messages again.
Note: If you plan to shut down your internal mail server for maintenance for a longer period (more than a couple hours), best practice is to suspend the incoming listeners on your ESA as well (suspendlisteners). As mentioned before, in this case any connection attempts will be soft bounced, and retried later. This way, you leave the task of storing the messages to the sending mail server, which will prevent the mail queue on your email appliances filling up quickly. No messages will be lost however, once you got your internal mail server back into service, also resume the listeners on your ESA (resume), to allow delivery from remote hosts again.
I hope this helps!
-Robert
(*If you have received the answer to your original question, and found this helpful/correct - please mark the question as answered, and be sure to leave a rating to reflect!) -
FWD: Non-Delivery of:How to monitor who has what serviceobject connect
Hello, I'm getting quite of few of these Non-Delivery messages. Is this
someone trying to respond to my
question on service object connection? How to fix the problem?Hello Peggy,
I suggest that you make contact with Paolo Sidoli at DS Data (Italy). They
have written a very nice package called DORE that includes trouble shooting
utilities, that allow you to monitor what a remote user is doing (you can
actually see their screen!).
You can contact Paolo at [email protected]
Best regards,
Richard -
Non delivery ???
I have been getting multi emails from a few colleagues as it appears they get non delivery messages. The mails are coming thro perfectly but the senders are not aware of this.
These are incoming mails to a private address for my website [email protected] on the Streamline.net server and the messages state they cannot connect to the domain aeniorsgolf.org.uk - please note the difference in spelling.
My colleagues have checked the spelling at their end and even used the reply function on mails sent by myself.
but it somehow changes by itself.
I have checked everything at my end and have contracted Streamline.net support who indicate that this must be at the senders end. This happens on both my desktop and laptop and with OE6 and Thunderbird. I have tried it myself sending a test mail from my BTinternet account to the seniorsgolf account and this non delivery message still arrives although all the mail comes through.
Surely there must be some whizz kids or psychics on the forum who may have some idea.austinmorris wrote:
I have been getting multi emails from a few colleagues as it appears they get non delivery messages. The mails are coming thro perfectly but the senders are not aware of this.
These are incoming mails to a private address for my website [email protected] on the Streamline.net server and the messages state they cannot connect to the domain aeniorsgolf.org.uk - please note the difference in spelling.
My colleagues have checked the spelling at their end and even used the reply function on mails sent by myself.
but it somehow changes by itself.
I have checked everything at my end and have contracted Streamline.net support who indicate that this must be at the senders end. This happens on both my desktop and laptop and with OE6 and Thunderbird. I have tried it myself sending a test mail from my BTinternet account to the seniorsgolf account and this non delivery message still arrives although all the mail comes through.
Surely there must be some whizz kids or psychics on the forum who may have some idea.
Hi.
For your domain control panel, can you set forwarding of email addresses ? Since the "a" and "s" are so close together, this sounds like a typo on any forwarding setting.
It won't matter what machine or mail client you are using.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures -
Hi Cooper,
If i enable this script in my environment where everything is maintained as per compliance. If i will install Quest modules then there should not be any non-compliance issue. Means my security team should not raise concern about unlicensed software installed
in MS environment.
Pls confirm so that i can make a decision about this.Hi Kuldeep,
To see who's changed or reset their password, you would have to set AD auditing on each domain controller and specifically look for "Account management." You can do that by setting an audit policy in the Def Domain Controller policy so it
will apply to all DCs. Then you must check the Security log on each DC. The problem with that is you don't know which DC to check. A centralized tool would be better to use, such as SCOM or a third party tool, such as the Quest tool, which you already have.
AD DS Auditing Step-by-Step Guide
http://technet.microsoft.com/en-us/library/cc731607(v=ws.10).aspx
And you are already aware of the Quest tool:
Change Auditor for Active Directory
http://www.quest.com/change-auditor-for-active-directory/
For more info, you take a look at this thread where it was heavily discussed for more info and ideas:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/71c70e49-b0c0-46a2-885d-38d36c704e5a/active-directory-password-reset-event
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
To get non delivery complete documents
Hi All,
Is there a view with tables VBAK, VBAP, VBUK & VBUP to take information for non delivery completed sales order items
VBUK-LFSTK NE 'C'
AND VBUP-LFSTA NE 'C'
Pra
Edited by: pradeep Ratnayake on Jul 31, 2008 3:20 PM
Edited by: pradeep Ratnayake on Jul 31, 2008 3:20 PM
Edited by: pradeep Ratnayake on Jul 31, 2008 3:21 PMHi,
You can write a simple ABAP qurey with these tables to get the details.
Regards -
Preventing non-delivery reports (NDR) being sent by mail server
I need to stop my SL mail server from sending non-delivery reports for unknown local recipients.
Does anyone know to do this? There is a lot of information on how to change the Postfix settings via numerous Google searches, but none of the configuration changes I make seem to prevent the delivery reports.
Any help would be hugely appreciatedMaybe. The NDR my machine sends out go to the sender and not back to me. So I never see them. No I cannot tell you how to turn them off. At best (worst?) that would make your server non-compliant with the SMTP standard, and I have no desire to turn off something that is not affecting me anyway.
-
Non-delivery costs in TP/VS
What is the logic behind maintaining Non-Delivery Costs in TP/VS Cost Profile? How should you calculate the amount of non-delivery cost? If we do not maintain Non-delivery cost, what are the implications and how it impacts the TPVS planning during optimiser run?
Hi Sunil,
Non-delivery costs specifies the costs fixed for the vendor as the penalty for the non-delivery of goods. This can be equated to loss of sale that would happen if not sold or delivered on time.
For eg, in some scenarios, if there are sample orders to be executed, if those are not supplied on time, it leads to further cancellation of actual order etc.,
These costs are not a real value, but a theoretical value taken into consideration by the Optimizer. You maintain the penalty costs per day, whereas the Optimizer calculates the penalty costs per time unit (seconds) (i.e. it does not round up to full days).
The more important it is that a delivery takes place, the higher the costs you maintain here must be fixed in order to avoid non-delivery.
These costs should be higher than the costs that arise through the transportation of the ordered goods. Otherwise the Optimizer decides that non-delivery is cheaper than delivery and does not generate a shipment. The costs that arise through transportation comprise earliness or delay costs, fixed costs, and the dimension costs (time, stop-offs, distance, quantity) of all means of transport.
Regards
R. Senthil Mareeswaran. -
hi,
post delivery Issue and delivery means can u explain?Hi,
Delivery is the one which is created when a sales order is geneated. Delivery indicates that the mentioned quantity in the sales order item will be delivered.
post goods issue (PGI) - When a delivery is created. Then post goods issue is done. This is done to indicate Finance that delivery has been made hence payment has be collected from the customer
Reward points if useful,
Regards,
Niyaz -
BestBuy Washing Maching LG Delivery Issue
I ordered my LG washer/dryer set with Bestbuy on 11/29/09 and they scheduled a delivery for 12/6/2009. The delivery driver came and setup the dryer only, but the washer was damaged out of the box. They told me they cannot install it and took it back. I got a call from BestBuy they the new one will be delivered on 12/10/2009. The delivery driver called on 12/10/2009 that he cannot find my home and I have to meet him, where he can follow me back. I did that and he installed the washer, but as soon as he turned it on, the power button fell inside and we couldnt even turn it on. He took it back. I got a call from BestBuy that they will deliver it the 3rd time on 12/14/09 between 1-3:00. I got a call at 2:00 PM on the delivery day, that they will not be able to deliver it because they havent received the washing machine from their warehouse in Dallas. Now they are saying that they are delivering it on 12/15/09, which is tomorrow for the 4th time.
I just wanted to see, if anyone is having similar issues with BestBuy delivery or LG washers?Its not always Best Buy's fault that the product comes damaged. The product, in this case a washer, is manufactured overseas and shipped to an LG warehouse. Then its shipped to a Best Buy warehouse. In some cases, its shipped to the stores, which then do the delivery. So there are a lot of non-Best Buy stops along the way where things can get damaged.
Its not a frequent issue; my store is a Self Delivery store, meaning all the product gets that extra step of being shipped here before we deliver. Based on the amount of LG product I sell and deliver, the amount I hear about being damaged (which is 100% of the ones that are damaged) is incredibly minimal. Anything can happen, I will tell everyone that, since we aren't going to open your box and inspect it before delivery because most customers dont want something out of the box before it gets to their house. But, on a whole, LG does a very good job of protecting their product, and Best Buy does what it can to make sure we don't damage product.
I work for Best Buy, but I am not Best Buy. I post off of my personal knowledge and opinions, which may not always be correct.
- Best Buy Appliance Specialist, Melbourne, FL - -
I am having a number of issues receiving SMS messages sent as emails from a service my company offers. A number of our customers are complaining that they no longer can receive SMS notifications on their Verizon wireless devices. As a Verizon customer I recently tested as well and sure enough, the messages do not get delivered.
After doing some research, it is very clear that Verizon's mail servers are refusing to talk our outbound mail server. This is new behavior and we need it rectified. Unfortunately, trying to reach out to Verizon Customer Service via twitter has yielded silly questions about what device I am using.
Please help.And here's the logs. I shortened my phone number to 214
Jul 28 09:44:34 dewars postfix/cleanup[28373]: 53D3518944: message-id=<519272406.1805.1406558677279.JavaMail.flytecomm@govmessenger2.flytecomm.com>
Jul 28 09:44:34 dewars postfix/qmgr[4323]: 53D3518944: from=<[email protected]>, size=650, nrcpt=1 (queue active)
Jul 28 09:44:34 dewars postfix/smtpd[28369]: disconnect from unknown[192.168.138.71]
Jul 28 09:44:34 dewars postfix/error[28425]: 53D3518944: to=<[email protected]>, relay=none, delay=0.01, delays=0.01/0/0/0, dsn=4.0.0, status=deferred (delivery temporarily suspended: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp10.vtext.com)
Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/smtpd[28369]: D14E518946: client=govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/cleanup[28373]: D14E518946: message-id=<88277747.1806.1406558717794.JavaMail.flytecomm@govmessenger2.flytecomm.com>
Jul 28 09:45:14 dewars postfix/qmgr[4323]: D14E518946: from=<[email protected]>, size=669, nrcpt=1 (queue active)
Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/smtpd[28369]: D6D5918947: client=govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/cleanup[28373]: D6D5918947: message-id=<763050748.1807.1406558717816.JavaMail.flytecomm@govmessenger2.flytecomm.com>
Jul 28 09:45:14 dewars postfix/qmgr[4323]: D6D5918947: from=<[email protected]>, size=628, nrcpt=1 (queue active)
Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/smtpd[28369]: connect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/smtpd[28369]: DBDC718948: client=govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:14 dewars postfix/cleanup[28373]: DBDC718948: message-id=<630718322.1808.1406558717837.JavaMail.flytecomm@govmessenger2.flytecomm.com>
Jul 28 09:45:14 dewars postfix/qmgr[4323]: DBDC718948: from=<[email protected]>, size=628, nrcpt=1 (queue active)
Jul 28 09:45:14 dewars postfix/smtpd[28369]: disconnect from govmessenger2.flytecomm.com[192.168.138.71]
Jul 28 09:45:15 dewars postfix/smtp[28550]: D6D5918947: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp3.vtext.com
Jul 28 09:45:35 dewars postfix/smtp[28549]: D14E518946: host smtp-bb.vtext.com[69.78.128.213] refused to talk to me: 554 njbrspamp3.vtext.com -
Sales Analysis on Item Delivery issue
Hi Experts,
I have another Issue regarding Deliveries at the same Client I posted this message on a few minutes ago:
"Delivery Document not closed even though Invoice is linked"
This issue relates to the Sales Analysis Report. When we open the Sales Analysis report on the Items Tab and select Monthly report, Delivery Notes, Individual Display and No Totals we get the report with 0 quantities for all the months selected even though there is deliveries for these items.
Any help will be appreciated.
Thanks,
MarliHi Marli,
Something must be wrong within the B1 database. You may need to restore the latest copy of the db to do more testing.
It might be a bug or human error.
Thanks,
Gordon -
Dear Friends,
I have created sales order to receive the Repair parts from my customer, I have done post goods receipt for the material as per the sales order, after that we have repaired the material and I have done the delivery of 10 and 30 line items, but later if I want to do delivery for the line item no20, Iu2019m getting the massage u201CNo schedule lines due for delivery up to the selected dateu201D but for all these materials schedule lines are confirmed on same date.
This is Message no. VL248
And also getting the Error massage u201COrder cannot be delivered (see long text)u201D
Message no. VL461
Can you please suggest me how to over come this issue?
Edited by: Hari Krishna on Jan 8, 2009 8:31 AMHi,
Go to your sales order and select item 20 and go to the schedule line.
Over there check about the delivery date for that item or material.
Now go to VL01n and give your shipping point then delivery date and order number.
Check whether it is happening or not.
Regards
Raj. -
Windows 8.1 Pro Non-Unicode Issue: CS6 Standard
I use WIndows 8.1 Pro English, I installed the CS6 Standard in Spanish, I changed the language for the non-unicode programs to spanish but still cannot use the Illustrator, I am having issue only with the Illustrator, noting that in the installation I was prompt for Spanish(Latin America) or Just Spanish, I clicked on Spanish(Latin America), but in the non-Unicode languages there is no Spanish(non-Unicode) they have Spanish per countries.
I have the same problem did you manage to find the solution? is impossible to contact adobe helpers, they just hide all contact
Maybe you are looking for
-
OS: Debian 7 x86-64 Browser: FF 23.0 /opt/firefox/firefox: ELF 64-bit LSB executable, x86-64 /usr/lib/flashplugin-nonfree/libflashplayer.so: ELF 64-bit LSB shared object, x86-64 I'm running FireFox and open in it from 3 to 20 tabs . Earlier in this s
-
Just started using the shared Photostream feature today, and we noticed that the first shared Photostream we tried duplicated all the photos that were shared if viewed from iPhoto or AppleTV. The web site for the shared Photostream does have exactly
-
Runtime stlport4 error: Unexpected Signal : 11
Hi Gurus, I am using CC 5.5 with stlport4 to build our project. I basically build a jni library which got called from java class. I had no compile and link problem. If do "ldd -r MyLib.so", all symbols are resolved. But at runtime, I got the followin
-
Allowing trasaction currency post to the Controlling area
Hi All, My Exisiting Configuration is as follows: local curr: MYR CO AR CURR: MYR (ALL OTHER COMPANY CODES ARE ASSIGND TO THE CO AREA) OBJECT CURR:MYR, NOW WE ARE RESETTING THE COMPANY CODE, AND CHANGE CONFIGURATION AS FOLLOWS LOCAL CURR : USD SEC
-
HT4528 My Apple ID changed on my iPhone
My apple ID changed on my iPhone today. Even though it says my original ID in my settings, it pops up as .me.com when I go to update Apps. Please help!