Non-existent errors in Problems view
Hello,
Sometimes flash builder shows non-existent errors in Problems. "Project clean" helps, but errors appear after several compilations again.
The problem was in pure action script class that extented MXML component.
After deleting that code all problems were dissappeared.
Similar Messages
-
Questionable NE (non existant) row in conflict view
In the conflicts view, we have a record which shows up as non existing in the base version. But we know that the row existed (in LIVE) before the child workspace was created, and we know that the row was subsequently updated (not inserted) in LIVE and updated (not inserted) in the child workspace. (We have the history view). Why would the conflict view think that the row didn't exist before?<br>
WM_WORKSPACE PK WM_DELETED
<br>GR13_M4_2005Q3 1039133 NO
<br>BASE 10391336 NE
<br>LIVE 10391336 NO
<p>
Thanks
chaimHi,
This could happen for the following reason. If the update in LIVE workspace overwrites the base version of the row, then the CONF view will report the row as being non existent. The NE code does not mean that the base row never existed, only that it no longer exists. Since the base row was overwritten, the CONF view is correctly identifying it as NE.
The row in the LIVE workspace could be overwritten due to the table being versioned with the view_w_overwrite history option or without any history. It is also possible to turn overwrite on at the session level for tables versioned with the view_wo_overwrite option.
This behavior would typically not occur in workspaces that are not continually refreshed(CR). This is because when a non-CR workspace is created, an implicit savepoint in created in the parent workspace which will prevent the base row from being overwritten. This savepoint is not created for CR workspaces. You could also explicitly create a savepoint in the LIVE workspace if you want to prevent this situation from occurring.
If any of the above is not applicable to your case, then I would need more details to determine why this is happening.
Regards,
Ben -
VI Analyzer shows non-existant error
I just ran VI Analyzer on a VI and received the following in the results.
"The function "Request Deallocation" has none of its outputs wired, and therefore performs no useful operation. Consider removing this function from your diagram."
The "Request Deallocation" function has no outputs, only a single boolean input, and it is connected.
Another thing I noticed that is not quite correct is the "Wires Under Objects". It triggers a warning if a wire is just touching an object, but not hidden. I had a wire running from a For loop iteration terminal to the 'index' terminal on an array function and the bend in the wire was touching the bottom corner of the 'Loop Count' ternimal, but was not under it.
This is on WinXP, LabVIEW
7.1 andVI Analyzer 1.0
Ed
Ed Dickens - Certified LabVIEW Architect - DISTek Integration, Inc. - NI Certified Alliance Partner
Using the Abort button to stop your VI is like using a tree to stop your car. It works, but there may be consequences.Hi Ed,
In regards to your first problem, that is definitely a bug in the Unused Code test...the "Request Deallocation" function obviously shouldn't fail that test. I will make sure this gets fixed in the next version of the VI Analyzer.
For the second problem, I would argue that both of the examples you give in your screenshots should be flagged by the test. You are correct that the wires are not technically "under" the For Loop N terminals, but I feel that both examples are not good examples of wiring, especially given all the extra space to the right inside the For Loop. The wires are unnecessarily crowded up against the N terminal. Obviously this is a trivial case, but the purpose of the Wires Under Objects test is to improve the readability of diagrams
, and I think we all agree that diagrams are more readable with more whitespace between wires and adjacent objects.
Nevertheless, we do plan to add a pixel tolerance option to the test in the next version of the VI Analyzer, since I know that not everyone agrees with my purist views on wire spacing.
One more thing...I noticed in your post that you are using LabVIEW 7.1 and the VI Analyzer 1.0. There are some issues with using the VI Analyzer 1.0 with LabVIEW 7.1, and these issues are addressed and corrected with the VI Analyzer 1.0f1 patch. You can read about the issues, and click a link to download the patch, in this KnowledgeBase document.
Please let me know if you have any other questions or feedback on the VI Analyzer.
Darren N.
LabVIEW R&D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
None exist error code after a graceful shutdown
I'd like to return a none zero exit code after a normal graceful shutdown.
My end task is to be able to send a restart event to a number of machines running my application that will gracefully shutdown and inform the shell script that started it that it wants to be restarted.
One option would be System.exit with a shutdown hook that monitors the current threads, and does not end until the other threads have also exited, but I would have to inform this hook of threads that should be allowed to finish naturally. But that seams a little [t]icky.
I guess I could write to a file, and then close down naturally. But this leaves files drifting about. I'm not overly keen on that either.
Any other suggestions? Thanks, MikeThe "worker" thread should
not be interupted, and told to exit, just left to
exit under there own steam. (when they have finished
the current job). What is the "worker" thread ? Is it what I meant with "watcher" thread ? Is that what you said or what I said ?
And, I assumed we are talking about a server-like application, that is one running indefinitely, as opposed to one that would perform a specific task and then terminate. Am I correct ?
The initalization of this new type of
shutdown/restart is currently undefined, but will
likely that the application start listening on a
socket connection. I'm sorry, I don't understand that at all.
I want this to ease deployment,
currently when I deploy a new version I type "ant
deploy", then VNC on to each of the computer
(currently just 3, but likely to be more soon) and
manually restart. What I want is to just type "ant
deploy" it sends a signal to the running copies, and
they restart themselfs. (I'm a lazy brsatard).You know this quote by Larry Wall (?) about the three most important characteristics of a programmer, don't you ?
>
and thus the exit code is already defined.Not so with what I would consider a "graceful
shutdown". Then the application would shut down as
all the threads have completed.It depends on whether having "all threads completed" is a normal part of the application's flow. If I assumed correctly we were talking about a server-like app, then it's not. Ergo the command to terminate has to be issued at some point. The question is how that gets done. For instance, if you send a CTRL-C from the shell, your application shuts down with an error code != 0.
A graceful shutdown needs to be initiated somewhere. How do you plan to do it ? -
10gLiteR3 publishing ORA-00942: table or view does not exist error
Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition -
Error message for View Container Element that is no longer existing
Hi Experts,
i have problem in my webdynpro component. After perform the Code Inspector I get a error message accordingly View Container element.
In one of my view I have rename the name of a viewcontainer element.
Afterwards I could the find the ViewContainer element with new name in my window. But there is also displayed the view container element with the name before renaming. Therefore the code inspector give the error message:
"View Container ..... does not contain a View Container UIelement".
I try different ways to solve it, but it is not possible to delete the displayed ViewContoinerElement in window(that is no longer existing) and it is also not possible to find the ViewContainerElement with the old name in the View.
Thanks in Advance.Hi,
Instead of trying to delete the View Container UI Element in window, Delete the View itself in window and then re-map it again to the window by simply drag and drop.
Hope this helps u,
Thanks & Regards,
Kiran. -
Non-sense error message trying to create view
Greetings All,
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production on Windows 2008R2
I am getting an error while trying to create a view. The error makes no sense in that no attempt to change a user name or password as the error message being produced suggests.
I can execute the entire select statement fine, I get results back.
If I comment out the line indicated as being in error, the problem moves to the line prior to the one commented out. The 4 lines prior to the line indicated by the error message are similar. The error is occurring on the last of the 5 similar lines of code.
If I move all 5 lines further up in the code the error moves accordingly.
The function validate_number (near where the error is identified) under certain conditions will issue a execute immediate 'alter session set nls_numeric_characters = ''.,''';
The column number identified in the error message is 2 spaces prior to the validate_number function call.
Below is the syntax for the creation of the view, the error message is at the bottom.
The numbers to the far left indicate the line number. I put 2 blank lines before and after the line of code identified by the error message.
The error points to the 2-spaces in front of the VALIDATE_NUMBER function call on line 350. just before the sql code ==> validate_number(Spend_Qty,'')),0) <==
Thanks for your time,
Bob
CREATE OR REPLACE VIEW REPORT_STAGING_V AS
- SELECT
- SPEND_STAGING.INPUT_FILE_ID,
- SPEND_STAGING.SPEND_ID,
- SPEND_STAGING.SPEND_DOC_NUM,
- SPEND_STAGING.SPEND_DOC_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_YR_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_DOC_NUM,
- SPEND_STAGING.ACCT_PYBL_INV_FSCL_YR_NUM,
- SPEND_STAGING.COMPANY_CODE,
- SPEND_STAGING.ACCT_PYBL_INV_LN_ITM_NUM,
- SPEND_STAGING.SPEND_DOC_TYPE_CD,
- SPEND_STAGING.SPEND_MTHD_TXT,
- NVL(SPEND_STAGING.SRC_SYS_CD, '<BLANK>') SRS_SYS_CD,
- SPEND_STAGING.SPEND_SAVING_DT,
- SPEND_STAGING.SPEND_SAVING_FSCL_WK_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_MTH_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_QTR_NUM,
- SPEND_STAGING.SPEND_SAVING_FSCL_YR_NUM,
- SPEND_STAGING.MTRL_GRP_CD,
- SPEND_STAGING.MTRL_GRP_DESC_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_1_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_2_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_3_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_4_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_5_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_6_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_7_TXT,
- SPEND_STAGING.MTRL_GRP_LVL_8_TXT,
- SPEND_STAGING.GL_ACCT_NUM,
- SPEND_STAGING.GL_ACCT_DESC,
- SPEND_STAGING.COST_CENTR_CD,
- SPEND_STAGING.PRFT_CENTR_CD,
- SPEND_STAGING.FUNCNL_AREA_CD,
- SPEND_STAGING.PURCH_GRP_CD,
- SPEND_STAGING.PURCH_GRP_NAM,
- SPEND_STAGING.PURCH_ORG_CD,
- SPEND_STAGING.PURCH_ORG_NAM,
- SPEND_STAGING.REGION_CODE,
- SPEND_STAGING.VNDR_ACCT_ROOT_NUM,
- SPEND_STAGING.VNDR_CORP_NAM,
- SPEND_STAGING.VNDR_CORP_TICKER_SYMBL_CD,
- SPEND_STAGING.BUYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.BUYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.PAYPOINT_VNDR_ACCT_NUM,
- SPEND_STAGING.PAYPOINT_VNDR_FIRST_NAM,
- SPEND_STAGING.SPEND_PYMNT_TERM_CD,
- SPEND_STAGING.SPEND_PYMNT_TERM_DESC,
- SPEND_STAGING.SPEND_PYMNT_BSLN_DT,
-50 SPEND_STAGING.SPEND_PYMNT_CLRNG_DT,
- SPEND_STAGING.CONTRACTUAL_PYMNT_TERM_DY_CNT,
- SPEND_STAGING.VNDR_MTRL_NUM,
- SPEND_STAGING.MTRL_ID_1280,
- SPEND_STAGING.MTRL_DESC,
- SPEND_STAGING.BAT_NUM,
- SPEND_STAGING.SPCL_STOCK_IND,
- SPEND_STAGING.INVTY_MVMNT_TYPE_CD,
- SPEND_STAGING.GOODS_RCPNT_NAM,
- SPEND_STAGING.MFG_PART_NUM,
- SPEND_STAGING.PLANT_CD,
- SPEND_STAGING.PLANT_DESC,
- SPEND_STAGING.STORAGE_LOC_CD,
- SPEND_STAGING.STORAGE_LOC_DESC,
- SPEND_STAGING.UNLOADING_PT_DESC,
- SPEND_STAGING.PO_NUM,
- SPEND_STAGING.PO_LN_ITM_NUM,
- SPEND_STAGING.PO_LN_ITM_LAST_CHNG_DT,
- SPEND_STAGING.PO_DOC_DT,
- SPEND_STAGING.PO_TYPE_CD,
- SPEND_STAGING.PO_TYPE_DESC,
- SPEND_STAGING.PO_UOM_CD,
- SPEND_STAGING.PO_PYMNT_TERM_CD,
- SPEND_STAGING.ASGND_ACCT_CTGRY_TYPE_CD,
- SPEND_STAGING.PO_SHORT_TXT,
- SPEND_STAGING.GR_MTRL_DOC_TXT,
- SPEND_STAGING.ACCT_PYBL_INV_ITM_TXT,
- SPEND_STAGING.PO_RCPT_INV_HST_DOC_POST_DT,
- SPEND_STAGING.APPRTN_NUM,
- SPEND_STAGING.REQTN_TRK_NUM,
- SPEND_STAGING.REQTN_LN_NUM,
- SPEND_STAGING.REQTN_LN_ITM_NUM,
- SPEND_STAGING.REQTN_PERSN_ACCT_ID,
- SPEND_STAGING.NTWRK_NUM,
- SPEND_STAGING.NTWRK_CTGRY_CD,
- SPEND_STAGING.PROJ_NAM,
- SPEND_STAGING.WBS_ELMNT_NAM,
- SPEND_STAGING.CPTL_PO_IND,
- LU_GAC_STAGING.TIER_SUPPLIER,
- CASE
- WHEN SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT = 'GAC'
- AND LU_GAC_STAGING.PO_SHORT_TXT = SPEND_STAGING.PO_SHORT_TXT
- AND SPEND_STAGING.SRC_SPLR_NAM IS NULL
- THEN LU_GAC_STAGING.TIER_SUPPLIER
- ELSE SRC_SPLR_NAM
- END SRC_SPLR_NAM,
- SPEND_STAGING.TAX_CD,
- SPEND_STAGING.TAX_CD_DESC,
- SPEND_STAGING.TAX_JURISDICTION_TXT,
- SPEND_STAGING.MTRL_DOC_PRCS_UOM_QTY,
-100 SPEND_STAGING.MTRL_DOC_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.PO_LN_ITM_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_UNIT_QTY,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_DC_AMT,
- SPEND_STAGING.PO_LN_ITM_NET_PRC_BDGT_USD_AMT,
- SPEND_STAGING.PO_LN_ITM_TOT_USD_AMT,
- SPEND_STAGING.SPEND_USD_AMT,
- SPEND_STAGING.SPEND_DOC_CURNCY_AMT,
- SPEND_STAGING.SPEND_LOCAL_CURNCY_AMT,
- SPEND_STAGING.SPEND_BDGT_USD_AMT,
- SPEND_STAGING.SPEND_QTY,
- SPEND_STAGING.SPEND_QTY_UOM_CD,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_QTY,
- SPEND_STAGING.SPEND_UNIT_OF_ENTRY_UOM_CD,
- SPEND_STAGING.SPEND_DC_FX_MTH_CNVRSN_FCT_VAL,
- SPEND_STAGING.SPEND_DC_FX_BDG_CNVRSN_FCT_VAL,
- SPEND_STAGING.CMPNY_LOCAL_CURNCY_CD,
- SPEND_STAGING.DOC_CURNCY_CD,
- SPEND_STAGING.TRANSTN_TYPE_CD,
- SPEND_STAGING.ACCT_ASGNMT_SEQ_NUM,
- SPEND_STAGING.GLPCA_LN_ITM_REC_NUM,
- SPEND_STAGING.PCA_REF_DOC_NUM,
- SPEND_STAGING.CO_DOC_NUM,
- SPEND_STAGING.CO_FSCL_YR_NUM,
- SPEND_STAGING.CO_LN_ITM_NUM,
- SPEND_STAGING.VNDR_REF_DOC_NUM,
- SPEND_STAGING.SAVING_MTHD_TXT,
- SPEND_STAGING.SAVING_CMNT_TXT,
- SPEND_STAGING.SAVING_COND_NUM,
- SPEND_STAGING.SAVING_COND_ITM_NUM,
- SPEND_STAGING.SAVING_COND_TYPE_CD,
- SPEND_STAGING.SAVING_COND_TYPE_DESC,
- SPEND_STAGING.SAVING_COND_CURNCY_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_UOM_CD,
- SPEND_STAGING.SAVING_COND_PRC_UNIT_QTY,
- SPEND_STAGING.SAVING_COND_RTE_USD_AMT,
- SPEND_STAGING.SAVING_COND_CURNCY_CNVRSN_VAL,
- SPEND_STAGING.SAVING_COND_CURNCY_BDGT_CNVRSN,
- SPEND_STAGING.PO_TRANSTN_COND_DC_AMT,
- SPEND_STAGING.PO_TRANSTN_COND_USD_AMT,
- SPEND_STAGING.SAVING_RTE_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_USD_AMT,
- SPEND_STAGING.SAVING_PER_BDGT_USD_AMT,
- SPEND_STAGING.AVOIDANCE_USD_AMT,
- SPEND_STAGING.AVOIDANCE_BDGT_USD_AMT,
- SPEND_STAGING.SAVING_USD_AMT,
- SPEND_STAGING.SAVING_BDGT_USD_AMT,
- SPEND_STAGING.NO_FX_SAVING_USD_AMT,
- SPEND_STAGING.NO_FX_AVOIDANCE_USD_AMT,
-150 SPEND_STAGING.TOT_REDUCTN_USD_AMT,
- SPEND_STAGING.TOT_REDUCTN_BDGT_USD_AMT,
- SPEND_STAGING.TOT_NO_FX_REDUCTN_USD_AMT,
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM,
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM,
- SPEND_STAGING.ROW_CRTE_GMT_DTTM,
- SPEND_STAGING.ROW_MODIFY_GMT_DTTM,
- SPEND_STAGING.ROW_CRTE_MST_DTTM,
- SPEND_STAGING.ROW_MODIFY_MST_DTTM,
- SPEND_STAGING.PRCRMNT_DIRECTOR_NAM,
- SPEND_STAGING.PRCRMNT_PLANT_DSGNTN,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_1_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_2_TXT,
- SPEND_STAGING.PRCRMNT_RPTNG_LVL_3_TXT,
- SPEND_STAGING.SPEND_CAT_ID,
- SPEND_STAGING.SPEND_RULE_ID,
- SPEND_STAGING.TRANSACTION_DATE,
- SPEND_STAGING.SPEND_AMOUNT,
- SPEND_STAGING.ITEM_DESCRIPTION,
- SPEND_STAGING.SUPPLIER_ID,
- CASE
- WHEN SPEND_STAGING.SOURCE ='SPEND'
- THEN 'Spend and Savings'
- WHEN SPEND_STAGING.SOURCE ='TRAVEL'
- THEN 'Travel'
- ELSE NULL
- END SOURCE,
- SPEND_STAGING.SUPPLIER_NUMBER,
- SPEND_STAGING.TRAVEL_PERSNO,
- SPEND_STAGING.TRIP,
- SPEND_STAGING.TRAVEL_DOC,
- SPEND_STAGING.TRAVEL_EXPTY,
- SPEND_STAGING.TRAVEL_EXP_TYPE_DESC,
- SPEND_STAGING.TRAVLE_CREDIT_CARD_TRAN_DESC TRAVEL_CREDIT_CARD_TRAN_DESC,
- SPEND_STAGING.COUNTRY_CODE,
- SPEND_STAGING.TRAVEL_INFO,
- SPEND_STAGING.TRAVEL_ID,
- SPEND_STAGING.TRAVEL_DOCUMENT_NUMBER,
- SPEND_STAGING.TRAVEL_LAST_NAME_FIRST_NAME,
- SPEND_STAGING.TRAVEL_TRIP_REASON,
- SPEND_STAGING.TRAVEL_TRIP_STATUS,
- SPEND_STAGING.TRAVEL_RATE,
- SPEND_STAGING.FINANCE_ORG,
- SPEND_STAGING.ASSOCIATED_MG_CODE,
- SPEND_STAGING.COUNTRY_DESC,
- SPEND_STAGING.TRAVEL_ID_DESC_BANKCARD,
- SPEND_STAGING.COMPANY_CODE_DESC,
- SPEND_STAGING.COST_CENTER_DESC,
- 'Q'||TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'Q') QUARTERNAME,
- TO_CHAR(SPEND_STAGING.TRANSACTION_DATE,'YYYY') YEARNAME,
-200 CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.CLEANSED_PARENT_NAME
- ELSE SS1.CLEANSED_PARENT_NAME
- END CLEANSED_PARENT_NAME,
- CASE
- WHEN SPEND_STAGING.SRC_SYS_CD = 'P-CARD'
- THEN SS2.cleansed_name_1
- ELSE SS1.cleansed_name_1
- END CLEANSED_NAME1,
- CASE
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NOT NULL
- THEN SPEND_STAGING.VNDR_MTRL_NUM
- WHEN SPEND_STAGING.MTRL_ID_1280 IS NULL
- AND SPEND_STAGING.VNDR_MTRL_NUM IS NULL
- AND SPEND_STAGING.MFG_PART_NUM IS NOT NULL
- THEN SPEND_STAGING.MFG_PART_NUM
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZAR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-MIX'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSA'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ASMBLY'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZST'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-TEST'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-250 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZBI'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-BURN-IN'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZRJ'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-REJECT'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZPR'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-PROBE'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
-300 THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEU'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENGWFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZSF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-WFR'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.PO_TYPE_CD = 'ZEF'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-ENG'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EFM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- WHEN SPEND_STAGING.MTRL_GRP_LVL_4_TXT = 'EWM'
- AND SPEND_STAGING.MTRL_ID_1280 IS NOT NULL
- THEN SPEND_STAGING.MTRL_ID_1280
- ||'-POTypeCode'
- ELSE SPEND_STAGING.MTRL_ID_1280
- END ReportingPartNum,
- LU_PCARD_STAGING.COST_CENTR_CD PCARD_COST_CENTR_CD,
- LU_PCARD_STAGING.CTY_NAM PCARD_CTY_NAM,
- LU_PCARD_STAGING.DISABLE_LINE PCARD_DISABLE_LINE,
- LU_PCARD_STAGING.DISABLED_OWNED_BIZ_FLG PCARD_DISABLED_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.DIVERSITY_VNDR_FLG PCARD_DIVERSITY_VNDR_FLG,
- LU_PCARD_STAGING.FIELD PCARD_FIELD,
- LU_PCARD_STAGING.GL_ACCT_NUM PCARD_GL_ACCT_NUM,
- LU_PCARD_STAGING.HUB_ZONE_SMALL_BIZ_CONCERN_FLG PCARD_HUB_ZONE,
- LU_PCARD_STAGING.MINORITY_OWNED_BIZ_FLG PCARD_MINORITY_OWNED_BIZ_FLG,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Usd_Amt,'')/DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_usd,
- NVL(validate_number(Po_Ln_Itm_Net_Prc_Dc_Amt,'') /DECODE(validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,''),0,1,validate_number(Po_Ln_Itm_Net_Prc_Unit_Qty,'')),0) po_unit_price_per_1_doc_cur,
- NVL(validate_number(Spend_Bdgt_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_budgt_rate,
- NVL(validate_number(Spend_Usd_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) spend_up_per_1_usd_mon_rate,
-350 NVL(validate_number(Spend_Doc_Curncy_Amt,'') /DECODE(validate_number(Spend_Qty,''),0,1, validate_number(Spend_Qty,'')),0) Spend_UP_per_1_Doc_Curr,
- TO_CHAR(TRANSACTION_DATE,'MM-YYYY') MONTH_YEAR,
- LU_PCARD_STAGING.MTRL_GRP_CD PCARD_MTRL_GRP_CD,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM PCARD_PAY_TRANSTN_LN_ITM_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM PCARD_PAY_TRANSTN_NUM,
- LU_PCARD_STAGING.PAYMENTNET_TRANSTN_POST_DT PCARD_PAY_TRANSTN_POST_DT,
- LU_PCARD_STAGING.PCARD_INV_AMT PCARD_INV_AMT,
- LU_PCARD_STAGING.PCARD_INV_CURNCY_CD PCARD_INV_CURNCY_CD,
- LU_PCARD_STAGING.PCARD_INV_DT PCARD_INV_DT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_AMT PCARD_INV_LN_ITM_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_AMT PCARD_INV_LN_ITM_TAX_AMT,
- LU_PCARD_STAGING.PCARD_INV_LN_ITM_TAX_CD PCARD_INV_LN_ITM_TAX_CD,
- LU_PCARD_STAGING.PCARD_INV_REF_NUM PCARD_INV_REF_NUM,
- LU_PCARD_STAGING.PCARD_INV_TAX_AMT PCARD_INV_TAX_AMT,
- LU_PCARD_STAGING.PCARD_MERCHANT_NAM PCARD_MERCHANT_NAM,
- LU_PCARD_STAGING.PCARD_OWNR_ID PCARD_OWNR_ID,
- LU_PCARD_STAGING.PCARD_SHORT_TXT PCARD_SHORT_TXT,
- LU_PCARD_STAGING.PCARD_SRC_FILE_NAM PCARD_SRC_FILE_NAM,
- LU_PCARD_STAGING.PLANT_CD PCARD_PLANT_CD,
- LU_PCARD_STAGING.PURCH_GRP_CD PCARD_PURCH_GRP_CD,
- LU_PCARD_STAGING.RCPNT_ID PCARD_RCPNT_ID,
- LU_PCARD_STAGING.REQTN_CRTE_BY_ID PCARD_REQTN_CRTE_BY_ID,
- LU_PCARD_STAGING.REQTN_LN_ITM_NUM PCARD_REQTN_LN_ITM_NUM,
- LU_PCARD_STAGING.REQTN_NUM PCARD_REQTN_NUM,
- LU_PCARD_STAGING.SERV_DISABLE_VETERAN_BIZ_FLG PCARD_SERV_DIS_VET_BIZ_FLG,
- LU_PCARD_STAGING.STATE_CD PCARD_STATE_CD,
- LU_PCARD_STAGING.STATE_CD,
- LU_PCARD_STAGING.VETERAN_OWNED_BIZ_FLG PCARD_VETERAN_OWNED_BIZ_FLG,
- LU_PCARD_STAGING.VNDR_ACCT_NUM PCARD_VNDR_ACCT_NUM,
- LU_PCARD_STAGING.WOMAN_OWNED_BIZ_FLG PCARD_WOMAN_OWNED_BIZ_FLG2,
- DENSE_RANK() OVER (ORDER BY NVL(TO_CHAR(TRANSACTION_DATE, 'YYYYMM'),'190010') DESC) AS DATE_RANK,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP PBU_MTRL_GRP,
- LU_PRICE_BY_UNIT_STAGING.MTRL_GRP_DES PBU_MTRL_GRP_DES,
- LU_PRICE_BY_UNIT_STAGING.MTRL_ID PBU_MTRL_ID,
- LU_PRICE_BY_UNIT_STAGING.PLANT PBU_PLANT,
- LU_PRICE_BY_UNIT_STAGING.PLANT_DESC PBU_PLANT_DESC,
- LU_PRICE_BY_UNIT_STAGING.SUPPLIER PBU_SUPPLIER,
- LU_PRICE_BY_UNIT_STAGING.DESCRIPTION PBU_DESCRIPTION,
- LU_PRICE_BY_UNIT_STAGING.UOM PBU_UOM,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_VOLUME PBU_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_VOLUME PBU_UOM_CONTENT_VOLUME,
- LU_PRICE_BY_UNIT_STAGING.CONTENT_WEIGHT PBU_CONTENT_WEIGHT,
- LU_PRICE_BY_UNIT_STAGING.UOM_CONTENT_WT PBU_UOM_CONTENT_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE__PACKAGE PBU_PRICE__PACKAGE,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_WT PBU_PRICE_PER_UOM_WT,
- LU_PRICE_BY_UNIT_STAGING.PRICE_PER_UOM_VOL PBU_PRICE_PER_UOM_VOL,
- LU_PRICE_BY_UNIT_STAGING.COMMON_NAME PBU_COMMON_NAME,
- LU_GAC_UOM_REFERENCE_STAGING.LU_GAC_UOM_REFERENCE_ID,
- LU_GAC_UOM_REFERENCE_STAGING.FSL_PART_NUMBER,
- LU_GAC_UOM_REFERENCE_STAGING.SUPPLIER LU_GAC_SUPPLIER,
-400 LU_GAC_UOM_REFERENCE_STAGING.DESCRIPTION LU_GAC_DESCRIPTION,
- LU_GAC_UOM_REFERENCE_STAGING.GAC_MAT_SUBGROUP LU_GAC_MAT_SUBGROUP ,
- LU_GAC_UOM_REFERENCE_STAGING.ACTUAL_FILL LU_GAC_ACTUAL_FILL,
- LU_GAC_UOM_REFERENCE_STAGING.COMMON__UOM LU_GAC_COMMON_UOM,
- LU_GAC_UOM_REFERENCE_STAGING.PACKAGE LU_GAC_PACKAGE
- FROM
- SPEND_STAGING,
- SUPPLIER_STAGING SS1,
- SUPPLIER_STAGING SS2,
- LU_GAC_STAGING,
- lu_card_code_staging,
- LU_PCARD_STAGING,
- LU_PRICE_BY_UNIT_STAGING,
- LU_GAC_UOM_REFERENCE_STAGING
- WHERE SS1.SUPPLIER_ID(+) = SPEND_STAGING.SUPPLIER_ID
- AND SS2.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND SS2.PAYMENTNET_TRANSTN_NUM(+) = SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND SS2.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND lu_card_code_staging.card_code(+) = spend_staging.travel_id
- AND lu_gac_staging.po_short_txt(+) = spend_staging.po_short_txt
- AND LU_PCARD_STAGING.PCARD_INV_REF_NUM(+) = SPEND_STAGING.PCARD_INV_REF_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_NUM
- AND LU_PCARD_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM(+) =
- SPEND_STAGING.PAYMENTNET_TRANSTN_LN_ITM_NUM
- AND LU_PRICE_BY_UNIT_STAGING.MTRL_ID(+) = SPEND_STAGING.MTRL_ID_1280
- AND LU_PRICE_BY_UNIT_STAGING.PLANT(+) = SPEND_STAGING.PLANT_CD
- AND lu_gac_uom_REFERENCE_STAGING.fsl_part_number(+) =
-431 SPEND_STAGING.MTRL_ID_1280;Error at Command Line:350 Column:112
Error report:
SQL Error: ORA-01031: insufficient privileges
01031. 00000 - "insufficient privileges"
*Cause: An attempt was made to change the current username or password
without the appropriate privilege. This error also occurs if
attempting to install a database without the necessary operating
system privileges.
When Trusted Oracle is configure in DBMS MAC, this error may occur
if the user was granted the necessary privilege at a higher label
than the current login.
*Action: Ask the database administrator to perform the operation or grant
the required privileges.
For Trusted Oracle users getting this error although granted the
the appropriate privilege at a higher label, ask the database
administrator to regrant the privilege at the appropriate label.
Edited by: Snyds on May 24, 2012 7:46 AMChecking for privileges was the first thing I did.
User has create view and create any view.
Also has alter session privilege which is needed within the validate_number function (see below).
I was able to create the view you suggested.
I believe there is a privilege problem, just cant figure which.
create or replace function validate_number(p_number in varchar2,
p_format_mask in varchar2)
return number
AUTHID CURRENT_USER is
v_number number;
v_mask varchar2(100) := '999999999999999999999.00000000000000000000';
cursor get_number_masks is
select mask,upper(is_i18n) is_i18n from cm_master.format_mask
where type = 'NUMBER' order by sequence, is_i18n;
begin
if p_format_mask is not null then
begin
return to_number(p_number, p_format_mask);
exception
when others then null;
end;
end if;
for a in get_number_masks
loop
if a.is_i18n = 'Y' then
-- We are applying an international number format mask
begin
-- Attempt #1
-- Set the decimal to a ',' and the group separator to a '.'
execute immediate 'alter session set nls_numeric_characters = '',.''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- First Attempt Failed - Attempt #2
-- Set the decimal to a ',' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = '', ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then
-- Second Attempt Failed - Attempt #3
-- Set the decimal to a '.' and the group separator to a ' '
begin
execute immediate 'alter session set nls_numeric_characters = ''. ''';
v_number := to_number(ltrim(rtrim(to_char(to_number(p_number, a.mask),v_mask))),v_mask);
execute immediate 'alter session set nls_numeric_characters = ''.,''';
return v_number;
exception
when others then null;
end;
end;
end;
else
begin
return to_number(p_number, a.mask);
exception
when others then null;
end;
end if;
end loop;
return null;
exception
when others then return null;
end validate_number;Edited by: Snyds on May 24, 2012 7:48 AM -
Hello All,
Seem to be having a problem recently. Whenever I attach any external drive to my Desktop I receive the following error in Even Viewer. I never encrypted any of the drives in question with bitlocker.
Encrypted volume check: Volume information on \\?\Volume{7cc70383-5d6b-11e0-855c-001c25a5a540} cannot be read.
Event ID: 24620
And I cannot access my drive information. At first i thought it may be an issue with one of the drives I have partially encrypted with TrueCrypt but I tried several other unencrypted drives and I receive the same error and I cannot access the
data on my drives.
I tried to access the Bit Locker Recovery tool program (downloaded the VISTA Version since there was no Windows 7 Version that I could find), but it did not allow me to install the recovery tool to attempt some kind of fixing.
The strange thing is that I do not have Windows 7 Ultimate installed (which from what I understand is the only way to have Bitlocker). I have windows 7 professional and I never encrypted my drives with bitlocker, 1 out of the 3 drives is partially
encrypted with TrueCrypt, the other 2 are not encrypted with anything.
The stranger thing is that I can plug the external drives to another laptop and I can access the data fine with no problem or errors. I searched the forum for simliar problems, but did not see any responses with fixes to this issue.
The only thing I can think of is that my Desktop downloaded and installed a bunch of Windows Updates within the last 4-5 days.
heres is the update list
http://farm6.static.flickr.com/5304/5890096650_431b0f3627_b.jpg
Any assistance in attempting to figure this out would be appreciated.Hi,
According to the error message, it should use
BitLocker Repair Tool to fix it, refer:
http://technet.microsoft.com/en-us/library/cc734057(WS.10).aspx
What error message did you receive when you use BitLocker repair Tool?
I notice one drive is encrypted with TrueCrypt, please use that program to unencrypt the drive for test.
If it doesn’t work, since the issue didn’t appear before, you can try to perform a system restore to see the result.
Hope that helps.
Regards,
Leo
Huang
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. -
Usage tracking problem : not started due to non-existent Usage Tracking tab
Hello,
I need some help after following the necessary steps to setup 'Usage Tracking'.
My table S_NQ_ACCT stays empty.
The structure in the rpd files looks like
* OBI Usage Tracking
Connection Pool
Usage Tracking Writer Connection Pool
Catalog
dbo
S_NQ_ACCT
My nqsconfig has the following entries related to usage tracking
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = YES;
DIRECT_INSERT = YES;
PHYSICAL_TABLE_NAME = "OBI Usage Tracking"."Catalog"."dbo"."S_NQ_ACCT";
CONNECTION_POOL = "OBI Usage Tracking"."Usage Tracking Writer Connection Pool" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
When making queries on the Usage Tracking SA, I still receive the following error in the NQServer.log File
+[59049] Usage Tracking not started due to non-existent Usage Tracking table "<Database>"."<Catalog>"."<Schema>"."<Table>".+
What am I doing wrong??
Txs for your quick help on this!
Kr,
A.Can you post your entire NQSConfig.INI file?
According to the message guide (http://download.oracle.com/docs/cd/E12103_01/books/AnyMsg/AnyMsg_Messages.html#wp1007961) the error you're getting specifies the table that OBIEE is trying to use, so the fact that yours reports literally "<Database>"."<Catalog>"."<Schema>"."<Table>" makes me think maybe the wrong config is being picked up. Also your comment that using a file instead of DB doesn't work either. -
DBMS_LOB.FILEOPEN(dir, fname) gives non-existent dir or file error
Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
MonaNot sure if the UTL_FILE package is the same but if you don't set the "utl_file_dir" variable in the INIT.ORA file prior to calling the FOPEN procedure you will get a similiar error. There may be an equivalent parameter for the DBMS_LOB package.
<BLOCKQUOTE><font size="1" face="Verdana, Arial, Helvetica">quote:</font><HR>Originally posted by Mona Marathe ([email protected]):
Hello!
I've been trying to load an image file into the oracle database using the DBMS_LOB loadfromfile procedure. In order to do this, I first have to open the appropriate file which I do using
temp_bfile := bfilename('temp_dir', in_filename);
where in_filename is a string having the appropriate filename. and 'temp_dir' is a directory object created as follows:
CREATE DIRECTORY temp_dir AS 'F:\';
Next when I do a
DBMS_LOB.FILEOPEN(temp_bfile, LOB_READONLY);
I get an exception ORA-22285:non-existent directory or file.
What am I doing wrong? Is the way I've created the directory object correct. I work on an NT machine.
Mona<HR></BLOCKQUOTE>
null -
KM transport error: ALL paths that were specified refer to non-existent
I have a folder /root/company.
I am trying to transport this company folder to my QA system.
I created a KMC file. I followed the instructions in below link.
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
IT throws an error during import. All paths that were specified refer to non-existent or read-only repositories.
Can anyone please suggest, what am I missing? Do I have to create any repositories on QA system. IF so, please suggest me how to do it?.
We are ussing EP 7.0 portal
Thanks,
RajAs per my understanding you have created KMC file for folder "company" which is inside "root".
Can you confirm if company folder exist in QA environment?? if it dosenot exist then create repository by performing following steps:
1. Go to System Administration --> System Configuration --> Knowledge Management --> Content Management --> Repository Manager --> File system Repository OR CM Repository (as per your requirement)
2. You can find whether you have to create Repository inside File System Repository OR CM Repository by looking into your test or developement environment by going into the path mentioned in step 1. Copy all the properties of the Company repository from test or dev environment.
3. Now inside one of the repository(File System Repository OR CM Repository) you can create one repository with name Company.
4. To create Company repository you will find the option "NEW" inside the above mentioned path and on clicking on the same, fill all the properties (take help of the properties you have copied in step 2).
And now try to upload the KMC file. -
Error: "All paths that were specified refer to non-existent ..."
Hi,
On the import of the KM Content I have the next error: "All paths that were specified refer to non-existent or read-only repositories".
I used the following links:
http://help.sap.com/erp2005_ehp_04/helpdata/EN/46/77da3bb8036ef0e10000000a1553f6/frameset.htm
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Please could you help me?
Thanks in advance.Hi,
Please refer the following thread
https://forums.sdn.sap.com/thread.jspa?threadID=1347171
http://forums.sdn.sap.com/thread.jspa?threadID=1544261
Regards
Priya -
ACE# sh script code - Error: Called API is invalid or non-existant
What is this ??
ACE# dir disk0:
2846 Jun 14 2010 15:40:33 NORDICID_PROBE
ACE# sh script code NORDICID_PROBE
Error: Called API is invalid or non-existant
Hardware is ACE-4710-K9 and software A3(2.7)
The probe itself is functioning ok according to show probe detail.
However show script script_name probe_name -counters all remain at zero for some reason. This wasn't the case on the previously use ACE software.
To my recollection the command show script code has worked successfully before on the same ACE software. Not 100% sure though, but it definitely worked on the previous software we ran on the ACE.Hi Timo,
You could be hitting CSCtu33866 (see
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtu33866 for more details)
If you are really hitting this bug, a reboot should fix the issue.
I hope this helps
Daniel -
I wrote a program on a laptop in our lab that used both the NI Elvis power supplies and DMM. On the laptops in the lab, which connected to NI Elvis through a board in the NI-PXIe device the program worked perfectly both as a vi and as an executable. The program needed to be put on some computers in another lab for student use with a different version of labview, and everything worked except for the variable power supplies. I activated debugging and it reported Error 7 at New File, NI 488: Non-Existent Board. After attempting to trouble shoot this and not finding any helpful results I attempted to rewrite the program on the computers directly, since I could only put the program on the computers as an executable since it was written in 8.6 and the computers only have 8.0 and 8.2. To begin I was going to launch labview from NI Elvis to use one of the example codes as a base for my program. When attempting to do this I got Error 2 with the possible causes being Labview memory full and NI 488: Write detected no listeners. My question is are the two errors related, and how can I fix these errors? All the NI Elvis software is 2.0, the original program was written in Labview 8.6, the computers have Labview 8.0 and 8.2 on them. The NI Elvis devices are connected directly through the computers, rather than through another device, I'm not sure if this might be causing some obscure hardware issue.
Hello Chris,
It looks like this error is associated with not having administrator privileges. Take a look at this other forum post for more information:
http://forums.ni.com/t5/Academic-Hardware-Products-NI/Error-2-when-starting-LabVIEW-from-ELVIS-Instr...
If you can log in as an administrator you should be able to avoid getting error 2 when you launch LabVIEW from NI Elvis. Alternatively, you can upgrade to NI-ELVIS 3.0, because the issue is fixed in that version of NI-ELVIS. You can find this by going to ni.com/support and searching for "NI-ELVIS 3.0"
Colden -
I am getting weary of my iPhone 4s. The battery life is non-existent, secondly, I had problems with calls, the caller couldn't hear me and now it cannot detect internet networks. Be they Wi-Fi or cellular. what could be the problem?
Mullaly75 wrote:
I assume u guys don't understand what open source software is
Yes, I think most of us do understand what open source software is. It sounds as if you don't. Here's some information:
Open-source software (OSS) is computer software that is available in source code form: the source code and certain other rights normally reserved forcopyright holders are provided under an open-source license that permits users to study, change, improve and at times also to distribute the software.
Open source software is very often developed in a public, collaborative manner. Open-source software is the most prominent example of open-sourcedevelopment and often compared to (technically defined) user-generated content or (legally defined) open content movements.
from http://en.wikipedia.org/wiki/Open_source_software
Yes, Tom Wu of Stanford wrote a paper on something called Secure Remote Access Protocol. It's a form of Asymetric Key Exchange and has nothing to do with hacking anything. It's actually intended to protect data.
Maybe you are looking for
-
HT1577 how do i download purchases from the itune store on my computer to my ipod
how do i download itune purchases from the computer to my ipod?
-
Need a new mac pro! Can I boot MacPro 6,1 (mid 2012) with an internal HD with OS 10.6 (Snow Leo)?
5 hours after reading here: (so much information that says "yes" "maybe" "no".....) I want and have to change my actual MacPro (late 2007) to a newer one, because without my business is over. The newest one (end 2013) is not possible, because my othe
-
Referencing files from classes
Hi All, could someone help me out with the correct procedure to reference a file (not a java class) from a class? In my situation I have a directory structure for a web app of the form: /WEB-INF/my-config.xml /WEB-INF/classes/datautils/AppConfig.clas
-
Hi, I was reading the "Configuration" file uix-config.xml, but i can't debug a UIX page... It's possible to debug uix pages? Thanks Juan Pablo
-
Jdk failed to create file in destination... WTF?!?!?!
jdk failed to create file in destination... im trying to make my own private server and it just wont work! whenever i try it says jdk failed to create file in destination... and im gettin rlly frustrated... anyways.. im running windows vista and i ne