Not a compatible version of Photoshop...can not open my psd files...

After "save as" a psd file, I am unable to open it.  "Could not complete your request because the file is not compatible with this version of Photoshop."..  "There was a problem reading the layer data.  Read the composite data instead ?"  It is no problem for me to open psd files but after saving it is not possible....?

martindyrlov wrote:
My version of Photoshop was newer trying save form an older version..Running Photoshop CC updated..
I don't understand if the older version was able to open the PSD it should be able to save the psd.  I can believe an old version of Photoshop not being able to open a newer version of Photoshop save psd file when newer features were used and saved into a PSD file.
Your wording confuses me even the context does not seem to make sense to me.

Similar Messages

  • I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

    I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
    more info:
    Photoshop never crashed or anything.
    I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
    The file size was appox. 1giga
    Thanks a lot

    The problem was saving over the network. Working across a network is not supported.
    This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
    If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
    See: 
    http://kb2.adobe.com/cps/406/kb406793.html
      Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
        Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work.  It should.
        Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
      If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
    When problems arise, a lot of valuable work can be lost.

  • Can I open a psd file in InDesign, if so how?

    Can I open a psd file in InDesign, if so how?

    You can Place a PSD in ID. You cannot open a PSD in ID.

  • I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite

    I can't open a .psd file in Illustrator CS4 after upgrading to Yosemite.

    Can you open any file, i.e. jpeg, etc.? Have you installed the Apple legacy Java: Java for OS X 2014-001? I'm guessing you have because you wouldn't be able to open PS at all without it. But have to ask.

  • Can´t open my .psd file to edit on photoshop CS v.8.0.1

    Dear all,
    I am trying to open a .psd file that I saved few weeks ago but i get an error: "could not open, becuase the layer you are trying to open is not a compatible text layer".
    I really need to edit this image ASAP and I would be really thankfull is someone could help me.
    regards
    Lili

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
    To help others help you, please read through this article and provide any additional relevant details.

  • Photoshop CS Extended can't open some PSD files

    Hi,
    Yesterday I have created a new PSD file and worked on it and finally saved the file, but now i can't open the file any more. PS always fails to open the file, because of an internal error.
    I have tried to open some other PSD files, but 3 of 4 files (on my current HDD) didn't work to open and i don't know why. All of those other PSD files are at least 1 month old and PS could open these files. The last time i have opened these files was two weeks ago. The one PSD file, that worked has the following properties:
    image: 1179x1528, 72ppi,8bit,RGB, 15,04 MB
    and the files that don't work have the following properties:
    image1: 454x340, 71ppi, 16bit, RGB, sRGB (profile), 1,17 MB
    image2: 1280x1024, 71ppi, 8bit, RGB, sRGB, 1,92 MB
    image3: 1191x1644, 71ppi, 16bit, RGB, sRGB, 12,02 MB
    I have got, the meta-data out of Adobe Bridge. I can see the preview Image and the thumbnails in the open-dialog of PS. I tried to open the file with other applications like Paintshop Pro and PhotoImpact and both couldn't open them. Paintshop Pro quits, because it doesn't support the "color model".
    I don't know, what else i can do to open these files. I looked around the forum but couldn't find any solution for my problem.
    Does anyone know a solution for my problem ?
    evangelion2100
    PS: I have deleted the pref-file of PS and still it didn't work.

    Dear all. After getting the same problem and read all possible solutions online with no success finally I got rid of this problem successfully and Now it is working perfectly again, and I hope It will work for you all.
    Here it goes:
    BACKGROUND (my case): PS CS3 installed (Premium-Extended), Win Vista 32 Bits. For months it was working perfectly until yesterday, when the app stopped when attempting opening some PSD files. Some other CS3 apps either stopped. 1st I thought it was some kind of file corruption issue.
    After 3 uninstall-reinstall attempts of the whole CS3 and still troubleshooting, I went to the Vista Error Log. Regarding PS CS3 there was a DLL file named "CoolType.dll" which was suspicious to be the main cause of this ****.
    Making a research, it relates to installed Fonts in Windows, that gave me the clue to all of it.
    Yesterday, I installed fonts while working with PS CS3 Im now pretty sure that this process someway altered the Cooltype.dll file, or fonts were not installed properly.
    SOLUTION (my case): locate and uninstall recent fonts (which may have been the problem). NOW my PS3 CS3 is working more than PERFECT!!
    HOPE THIS CAN HELP. I think this topic regards some kind of failed font installation. Check it out and remember if you have modified something.

  • Photoshop :: Can't Open Latest NEF Files From New D610

    I Can't Open Latest NEF Files From New D610.it can't open naturaly in photoshop CS6.

    Have you updated Camera Raw, which exact version is it?
    See this list to verify which version supports which cameras:
    Camera Raw plug-in | Supported cameras

  • How do I re-save an Illustrator file to an older version if I can't open the current file.

    How do I re-save an Illustrator file back to an older version, if I can't open the file because I don't have the newer version it was created in (besides the obvious of purchasing the newer version).

    Diamond DRP,
    You may download a free trail of CS6 or CC.
    CS6 is here,
    http://www.adobe.com/products/catalog/cs6._sl_id-contentfilter_sl_catalog_sl_software_sl_c reativesuite6.html?promoid=KFPHN
    and CC is here,
    http://www.adobe.com/downloads.html?promoid=JZEFS
    You can use it for 30 days.

  • Can't open my .psd file using CS4 windows XP & Mac OSX

    I am using photoshop CS4 on windows XP I cannot open my file. the message reads: Could not complete your request because the version is not compatible with this version of photoshop.
    I did open the file on my mac OSX CS4 as well to try to use some of the fonts installed there. Now the file will not open on either platform. Are there known issues with crossing platforms? I believe the files were always universal before?

    There is normally no problem.
    You failed to mention what format the file had.
    If fonts are missing, it should still open with an error message about the font.

  • Can I open a PSD file in Camera Raw?

    I have searched for information on this subject and everyone says  -- "just open Open As and choose camera raw".  The problem is there is no such thing as Open As (other than Open As Smart object) in my CS5 v. 12.0.2 nor in my CS4 v. 11.02.    What gives??
    In a side note I also can not open a tiff or jpeg in Camera Raw even though the preference settings indicate I should be able to do so.
    Any ideas why I do not see an Open As in the file menu of either of my PS copies?

    Yes, you can.  But not with Layers, obviously.  :~)
    However, you have to go through the File menu in Photoshop:
    File > Open
    Then, in the Open dialog box, go to the bottom-LEFT button and select Camera Raw.
    Do NOT select "Photoshop Raw" !  You want Camera Raw.
    Wo Tai Lao Le
    我太老了
    Message was edited by: Tai Lao

  • How can I open a psd file with layers in touch?

    I want to edit a psd file with layers in photoshop touch. Is this possible?

    No. (Kind of, sort of.) You can export PS Touch projects for import into desktop Photoshop and have the layers intact for further editing but you cannot do the reverse; any imported PSD will be automatically flattened. (I'm guessing this was done to prevent crashing. PS Touch supports 12 layers max vs. the potential thousands available in desktop Photoshop.)

  • Can't open a .psd file.

    I don't know what Adobe product to download to open the file. Can you tell me?
    I'm running Windows 7.

    This forum is not for product questions, but for discussions on the forums themselves. In any case, PSD stands for Photoshop Document.

  • When I open a psd file in photoshop I don't see the layers. When I opened a psd file in elements the layers would show up.

    When I was using elements and I opened a psd file that I wanted to re-edit the layers would be visable just as when I last closed the image. Now that I upgraded to photoshop and I open a psd file it opens with only the background layer. What am I doing wrong?

    System info? Versions? Exact settings? PS only opening the merged view could indicate that the file contains data unique to Elements which it cannot interpret.
    Mylenium

  • I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • Version 2.0 is not a compatible version error with synch manager

    i've build a synch plugin and i put the dll files in the plug in directory.
    when im running the synch plugin and im looking through the logs i get the following error "Version 2.0 is not a compatible version."
    i think the problem could happen because im using visual studio and i think it compiles standard with framework 2.0 and im guessing synch manager need framework 1.1. but im not sure?
    can anyone help me with this problem??
    kind regards,
    C. Oude Luttikhuis

    yes that error message is actually coming from the .Net Framework you can find more on it <a href="http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=521514&SiteID=1">here</a>
    For a netpoint 5.9 plugin it would need to be compiled in .Net 1.1, if you only have MS Visual Studio 2005 you might want to look into MSBee which will allow you to compile to 1.1 (but requires a higher developer knowledge) or i know that <a href="http://www.icsharpcode.net/OpenSource/SD/Default.aspx">SharpDevelop</a> is a free IDE that will compile to 1.1 code.

Maybe you are looking for

  • Customer to be also created as vendor and link required

    Hi Experts, Invoice is booked to a customer and for which commision needs to be passed as expense and TDS is applicable to such expense. If i create the same customer as vendor and deduct tds while passing commission entry would partly meet my reqire

  • Are there any Apps compatible with Aventail VPN?

    My corporate network uses Aventail VPN. I know the Macs are able to access my desktop, but so far I have not seen an iPhone App which does as well and my IS department is not very pro-Apple, or helpful. Are any of the VPN apps for the iPhone compatib

  • Printing-Adobe Reader

    How to print in Adobe Reader v9 on Mac. Having a problem printing an Adobe PDF file. Any suggestions would be a help. Thanks JRC

  • Oracle Portal outside intranet

    Hi!!! i have developed a intranet with Oracle Portal and we can see inside our intranet wit hhtp:/machine/pls/portal30 and now we like to see this outside, for this we have a second machine that is our outside http server and we make a change in our

  • OpenGL freezes computer with dual monitors and fglrx

    I am trying to use the fglrx driver, and with a single monitor I seem to have gotten everything working. However I am running into issues with two monitors. Basically, when I have two monitors any opengl program doesn't run properly. There are two ca