Not able to delete the interfaces in odi designer - Resolved

While deleting the interface i am getting error, see below:
This object is referenced by another object. View the details for more information.
You may also see where this object is used in this hierarchy.
I don't think this interface object is referenced by another object.
Can you tell me how to delete the interface.
Thanks in advance.
Message was edited by:
Mani

Hi Mani,
The hierarchy is like Data Models/Stores are Used In Interfaces, Interfaces are used in Packages.
So if you wanna delete anything in this hierarchy you need to delete the referenced one.
For deleting an Interface you no need to delete the data models/stores, you need to delete the interface in Package where its used.
Cross check again and there should be some reference in the Package for that Interface.
Also you can't able to use an Interface at MODEL.
P.S: Sorry for mess up you...:)
Thanks,
Guru

Similar Messages

Not able to delete model column in ODI Designer

When deleting a column from a data model I get an error "This object is referenced by another object".
The column was used in the Target Datastore of two interfaces. I have opened both interfaces to the Diagram tab and unchecked the "Active Mapping" selection for the affected column on the Target Datastore. No delete feature seems to be available on the Target Datastore mapping.
In the model I have expanded the "Used In" feature for the column and both "As a Source" and "As a Target" are empty.
Any suggestions would be much appreciated. Thanks
Rose

Hey, thanks for your attention on this!
Just as an update, the model column I wanted to delete still appeared in a couple of interfaces but I had shut off "Active Mapping" and unchecked "Insert" and "Update" so I expected to be able to delete the column from the model. Even though the column's "Used In" reference said it wasn't used anywhere, it continued to throw an error when attempting a delete.
What happened is that I had not cleared the Implementation tab for the affected column in one of the interfaces. The column was originally to be hard-coded to an 'A'. Once I cleared the 'A' out of the mapping, ODI let me delete the column from the model.

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

I have changed my Apple ID name and I want to change it on iCloud, however I am not able to delete the previous account because I need to turn off the Find my iPhone - and for that I need to log in with the old name and that is not working. Help anyone?

Hey tulgan,
This link will provide information on what to do after you change your Apple ID:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Welcome to Apple Support Communities!
Take care,
Delgadoh

Not able to delet the order

hi friends
I am not able to delet maintenance order. I have the following error message when I try to. What should I do? Thanks.
Balance of ORD 1000006902 is not zero
Message no. KO115
Diagnosis
The balance on object ORD 1000006902 is not zero. That is, there are still costs on the object.
System Response
The object cannot be closed and the deletion flag must not be set.
Procedure
Settle the object before you close it or set the deletion flag.
I have tried to settle the order with transaction KO88 (single order settlement) . i am getting message
There are no accrued amounts; settlement is not possible.

Hello WISH,
i guess you have to repost the cost of the internal order to another internal order (probably of the header level) before you can delete the internal order.
Kind regards

Transport is in modifiable status, But i could not able to delet the object

Hi All,
I have created one development transport and one customizing transport(my colleague), now i want to delete the some objects which contain these change request. But i can not able to delete those objects even though change request is in modifiable status.
How to delete the objects contain in modifiable transport?

Hi Arun,
It seems working now
Can add/delete the objects for released transport?
is it possible.
Two more question:
1). I have released one change request, now i want to change the description of the request, how to do that?
2).While executing transports, RDD* (RDDIMPDP) job has canceled in the target system.then what should i do?

Not able to Delete the data from Memory card

Hi all,
I have bought a new nokia 3120 classic.it is working fine but recently i have received some data from my friend.
Then suddenly the problem begins like.. when i take a photo.. i am getting error like the image is not in the format and i am not able to save that.And also, the main problem is I am unable to delete the data from my memory card.
Every time after deleting i am getting the same data.
Why this happening..is it because of VIRUS?? If so how to delete the virus from my memory card??
When i contacted the nokia care people in bangalore they are saying that they can offer the service of formatting the memory card??
Except that my Phone is working fine..the problem is with Memory card!!!
Please help me...

you can actually format your memory card first see if you have such option on your phone to format directly from the phone if that is not possible you can always use a card reader and reformat your card using your pc. just understand that all data from that memory card will be lost unless you do a back up of it. if you do a back up and restore the data to the memory card after reformat you might get the same issue so be careful as to what you will decide to do with the data from the card. once you format your card it should all be good unless the card is corrupted itself which can also happen. but first try with the reformat and see if it works out for you.
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Not able to get the value of ODI Variable when i pass thru Option

Hi,
I have ODI variable called prev_etl_run_date which will hold the last successful etl run date. I want to use the value of this variable in one of my KM step.
But i don’t want to use directly in my KM. So I passed the variable name thru KM Option.
I intend to use the variable’s value in the KM step, as shown below:
<%=odiRef.getOption("MY_OPTION_1")%>
Here I am expecting the value of the variable, but here I am only getting the variable name only.
Is there any substitution method available in ODI KM , please help me to solve this issue.
Thanks
nidhi

ODI options are not intended for run time parameters. They are like design choices or debugging flags or parameters that can be specified in code template. Previous ETL run time stamp is hardly a design choice.
On the other hand, it is really a bad practice to put a variable inside KM directly. That creates a dependency that you can easily avoid by putting a filter using that variable in the interface.

Not able to delete the data from ODS

Hi All,
I have ODS which is having some requests . All the requests are being loaded with full update only. When I am trying to delete the requests from ODS, out of 4 requests 2 requests have been deleted but rest of them are not at all deleting .
As I am working in Quality system, So I don't have the access to delete request from Table level like RSODSACTREQ, RSICCONT etc...
Can you give any clue to delete the remaining 2 requests.
Thanks,

Hi kavitha,
Does the Request has data mart status.IF yes try to delete the request from the respective DSO's.
and try to delete the request.
are you deleting the Whole data from DSO ? - right click on the DSO and select deleted data from the context menu.
Regards
Prashanth K

Not able to delete app icons that are in loading stage and more than 20mb, so cant be loaded completely.

I am not able to delete the app icon (loading) of more than 20MB file app.
I have downloaded them to my itunes but they just dont go away even after syncronising.
just to mention i have 3G network but no wifi at present.

Try resetting the iPad. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears and see if the loading icon is still there.
If that doesn't work, try deleting the app from the iPad and then sync it again. Delete the app by syncing with iTunes and deselect the app.
While your iPad is connected to your computer and iTunes is running, select your iPad on the left side bar, click on the apps tab in the iTunes window on the right, Uncheck the box next to the name of the app and then sync (click on apply) to remove the app from the iPad. Restart the iPad - hold down on the sleep button until the red slider appears, then slide to shut down, hold the sleep button until the Apple logo appears to start up.
Then connect the iPad to the computer again and go through the same process except this time select the app and click on apply to put it back onto the iPad.
See if that doesn't remove the loading icon.

Not able to delete application in planning

Hi! All,
I was trying 17 step procedure of migrating planning (from appendixD of administrators guide) , could not login to target planning application, so now I want to delete the target to give it a try again, I am not able to delete the planning app from workspace.
Is there a way to take care of this from back-end?
Thanks in advance.

I know that in 9.3.1 and previous 9.x versions there is the potential for issues with migrations if you don't use "Admin" for the app own.
My understanding is that "Admin" always has the same SID (OU=911x,DN=.......) in Open LDap repository. If you use a native ID like HypAdmin it will have a different ID in your dev environment then your production. There are ways to synchronize the Native repositories between Dev/Prod but it is easier to make "Admin" the app owner.
Hope this helps.
Steve

ODS request not able to delete very urgent

Hi All,
I am loading the data from r/3 system to bw (bi 7.0), the objct is Obpartner master data loading into this data targets are 0bp_o01, 0bpartner. there is no further loads.
while loading the delta load i am getting error message like " last delta not updated, repeat the last delta' .while i am checking in the monitor scree the request it's showing red , but in the data targets the request are showing green colour.
Note - i tried to chnge the status from green to red but it's not allwoing to change the status because " the requeest is partially activated u can't chage the status".
in the data targets i am trying to delete the the request but i am not able to delete the request, while selected request only for deletion it's asking for rollback.if u click on continue rollback all request will be going to delete.
please advise me is there any way to delete the request , i will assign the full points for right answer.
hi all,
there is no further loads , while i am trying to change
it's giving message like " the request is partially activated u con't update".
i think there is one procedure but i am not sure about
that one in se16 we can give the rsodsactreq. is it possible to delete the request here....
please advise if anybody knows.......
thanks
kk
Message was edited by:
kk

Hi ,
This should work ..
The request cannot be deleted in the administration of the data target, make sure that there is no data in the activation queue of the ODS for this request. If there is data nevertheless, make sure that table rsodsactreq contains all entries for this request and ODS in the operation field has the value 'U'. If this is the case, use transaction SE16 to delete all entries for this request and ODS object from tables rsiccont, rsmonicdp and rsodsactreq. Then set the 'from date' to a value that is older than the oldest loaded request in this ODS in the administration of the data target and choose 'Refresh'. This corrects the administration. The data in the activation queue does not cause a problem, it is deleted the next time all new requests are activated.
Regards
pavan
appreciate with points if it helps

LSO-AE not able to delete content

Hi
I am not able to delete the WBT course content in the Authoring environment. I was given u201Cfull controlu201D as a permission to master repository folder. I hope this permission allow me to delete the content. However, the content is not getting deleted from the master repository. The steps I followed to delete the content is as follows:
Authoring environment- select the published object-right click-select delete.
System is displaying the following message when I try to delete the content.
u201CYou are not allowed to delete the course which was checked inu201D
Thanks in advance
Robin

Hi,
Content - > Course - > Participant.
If a course is assigned to this content , it will be stored in hrp5006 table and if a participant has taken this course , he acquires the qual(hrp1001).So try this workaround by deleting this entry in hrp1001 and hrp5006 and then try deleting the content from the authoring tool.
Thanks
Edited by: Felix on Sep 4, 2009 1:30 PM

Not Able To Delete Master Agreements/Sub Agreements

Hello Everybody,
I have to delete a Master Agreement or Sub Agreement. The Help sections says that in order to be able to delete a MA/SA the following conditions should be met :
1) The current date should be greater than end date.
2) The current date should be greater than the Retention Date
3) The document should not be flagged as perpetual.
My document meets all the above conditions but when I try to delete it, I get a pop-up saying that the 'Document could not be deleted. It has been restored to its previous version'. I checked the log and it didn't help much. The Error there was 'Unable to delete the document'.
Now, here is the best part : I have a validation script that runs on a MA. If I make that script inactive, the document gets deleted. When I make it Active, I am not able to delete the document. The script, independently, runs without any error but seems to be generating exceptions here.
I am not sure why the system behaves this way. Any help is appreciated.
Thanks In Advance,
Devesh

Erik,
Thanks for the reply.
We have actually tried the approach you are suggesting before posting this thread. I wrote a similar logic to see whether the checkbox is checked and then delete it. But it was not of any help.
The same problem occurs. But the moment I make the script inactive things work now.
So, as of now, the problem is still there.
Thanks
Devesh

I changed my Apple ID that using an invalid email address to a new one and I am trying to update iCloud account on iPhone5 with iOS 7.1.2, and I am not able to delete iCloud account without the old password.

I changed my Apple ID that using an invalid email address and I am trying to update iCloud account with my new Apple ID on iPhone 5 with iOS 7.1.2. I am not able to delete iCloud account without the old password. Is there a way to update the Apple ID of my iCloud account?

Many people are having probalems with this right now. The only solution I've seen that seems to consistently work is the one posted by Brackers28 here: https://discussions.apple.com/message/23020591#23020591. This only works if you still have access to your old email account. If you don't, you'll have to have Apple help you reset the password for your old account so you can turn off Find My iPhone and sign into your account with your correct ID.

Not able to delete some of the pages in subpage

Hi,
I am not able to delete some of the subpages in a pagegroup and it gives the following error mentioned below can any one shed some light so that it can be fixed.
the error that surprised me during the page deletion is
Internal error (WWC-00006)
Error while deleting page. (WWC-44130)
Unexpected error - User-Defined Exception (WWC-35000)
Unexpected error - User-Defined Exception (WWC-35000)
Path ID does not exist. (WWC-50001)
this is the same problem with some of the pages is the same page group but a different set of subpages.
My portal version is 10.1.2.0.2 (Build: 150).
it would be very nice of them if any one could give me a solution for this.
Best Regards,
Vijay.

Only photos taken with the iPad, copied onto it via the camera connection kit, or saved from emails/websites etc can be deleted directly on the iPad. Photos that were synced from your computer are deleted by moving/removing/de-selecting them from where they were synced from on your computer and then re-syncing.

Not able to delete the interfaces in odi designer - Resolved

Similar Messages

Maybe you are looking for